WPA2 Enterprise Connecting Much Too Slowy On HP Laptop?
Oct 29, 2011
Recently bought a laptop HP Pavilion DM4 with Windows 7 home premium 64 bit for use in a college wireless environment. The school insists on WPA2 Enterprise connection, which is supposedly the recommended Microsoft security protocol for Win 7. I have all the correct settings, such that I can routinely connect to the wireless network but on this model HP I consistently get speeds way under 10kbs, while if I use EXACT same settings on a different Lenovo, Dell, or other models of HP get speeds of over 5MG. Yes 500x faster.Of course HP wanted to blame the network, but after sending 2 technicians to visit on campus, they agreed it was their hardware, so they sent a replacement unit. Unfortunately, the replacement unit has the EXACT same problem. BTW the problem computers do connect flawlessly to other wifi networks at full speed, just not the WPA2 Enterprise network.
View 1 Replies
ADVERTISEMENT
May 21, 2013
Not sure if this belongs here on in a different section. We are in the process of purchasing a new ACS 5.x appliance. I would like to take a look at implementing WPA2 Enterprise with our Cisco APs.
View 4 Replies
View Related
May 2, 2012
I have a Win2008 server set up as a radius server (192.168.32.71) and a stand alone AP (192.168.201.9) [code]
View 3 Replies
View Related
May 16, 2011
So I have been tasked with setting up WPA2-Enterprise on the network. Right now for testing I have a single Cisco 1240AP, and a test Windows Domain. The Windows domain is at 2003 functional level, but has been extended to have the Wireless policies, and we have a 2008 DC in the test network also.
Is there any definitive guide to setting up a WPA2-Enterprise wireless network? Most of what I find is mostly client side. I am trying to get the Group Policy setup to push down to the client machines.
View 4 Replies
View Related
Oct 22, 2011
We have 3 x WAP4410N at new office setup in Singapore. Customer asked us to setup those 3 AP to make client auth against an ACS 4.2 sitting in US office. All the user notebooks were joined to Windows domain in US office, before sent out to Singapore office. We configured APs with WPA2 Enterprise Mixed mode and entered radius server address and secrects correctly. Logging from ACS shows that users are authenticated successfully but, on the user notebooks, authentication never seems successful and keeps authenticating.
View 10 Replies
View Related
Apr 26, 2010
We have a WAP4410N wireless ap configured for WPA2-Enterprise. Initially everything works. Issue the user the proper certificate and they sign on correctly but once they disconnect and try to reconnect later it get stuck on "Validating Identity". The request never get to RADIUS server (no success/failure log entry, no radius traffic). Once I reboot the access point everyone can connect again but as soon as they disconnect the problem happen again.We testing other security settings (WPA-ENT, RADIUS(!), WPA2-Personal etc) and no problems. With older firmware have the same issue.Operating system: XP SP3, RADIUS server: IAS. Firmware: 2.0.1.0
View 2 Replies
View Related
Mar 2, 2013
I have a WLC 2106 with two AP's connected, But have not set up any authentication. I don't have CSACS at my disposal, so I thought I would try FreeRadius on my Linux Server. I am looking for User/Password auth, and for now I would expect to have those accounts local to the FreeRadius engine. (baby steps before I try PAM/LDAP/AD/Certs )
I have seen a number of posts asking final step questions. I was looking for more of a where to begin How To.
I have read the docs on Free Radius, and believe I have the method worked out on how to make a small change, run in debug mod to observe my change, to verify that I don't spend too much time pulling out my hair. I am fairly adept at CSACS 5.3 but it hides the magic of Radius from me.
View 4 Replies
View Related
Dec 22, 2012
I'm trying to connect an old HP desktop I have (running windows XP) to my home network, which uses WPA2 encryption. I'm pretty much a network noob so I have no idea what's going wrong. Right now it's stuck on "validating identity" when I try to connect to the network.
So far in my quest to solve this problem, I have:
1. Downloaded Service Pack 3.
2. Tried disabiling Authentication for the network.
From reading around forums I've learned that apparently after downloading Service Pack 3, I should be able to choose 'WPA2' as an option for "Network Authentication" on my Network's properties page. It still isn't showing up for me though.
Since my desktop can't connect to the internet, I couldn't download Service Pack 3 directly so I downloaded it on another computer, put it on a flash drive, and then uploaded it to the desktop. I'm not sure if this could be the problem or not, but if it makes a difference, I can verify on my Computer's properties page that I am running Service Pack 3.
My network adapter is a "Hawking Technologies HWP54G Wireless-G PCI Card". Is it possible that this card does not support WPA2? How do I tell? If it doesn't support WPA2, am I **** out of luck for trying to connect to my network without upgrading the card itself?
Why doesn't "WPA-2" show up as an option for my Network Authentication type?
View 7 Replies
View Related
Aug 17, 2012
My nexus 7 and my friends nexus phone are both running jellybean 4.1.1 and are unable to connect to our workplace's belkin wireless router. My nexus 7 says "authenticating" then says "network saved" then switches back to "authenticating". My friend's phone just gets stuck on "network saved". My iPhone and most other devices, including a different android phone, are in fact able to connect with no problems. I have tried resetting the router, but I am afraid that is all I will be able to do with regards to the router.
View 3 Replies
View Related
Jun 3, 2011
Trying to connect (ipod touch) to DIR-655 with WPA2 enabled.
* Is there a way to connect without having to enter entire Long WPA2 Pre-Shared Key?
* why iPod has required me to enter security password several times - why would it keep losing the saved password I've entered?
- What is the PIN SETTING for on Device homepage? Is that a shortened key?
-I'd already added multiple times in past, too...
View 1 Replies
View Related
May 22, 2013
I´m trying to connect them to my WLAN, for throubleshoot I create a new WLAN with WPA2-TKIP and a PSK, the devices didin´t connect to the WLAN.I also change the security to WPA2-AES with TKIP, it didn´t work too.
My best choice was to disable every security configuration in order to began the throubleshooting from zero, but even with no Layer 2 and 3 security, the devices didn´t connect to my Test WLAN.
I´m using a AIR-CT2504-K9 WLC with two AIR-CAP3502I-A-K9 AP, all the PCs and other brand cellphones and tablets work well.
Also I have a SOHO router on the office, and the IPad connect without a problem with that WLAN, but I need them to connect to my Cisco AP.
View 7 Replies
View Related
Jan 13, 2012
This is a 5-year-oldish Gateway MX-6124 laptop running under Win XP 2002, SP3. I'm using SureWest DSL, with an ISP-supplied ComTrend NexusLink 5631 Modem/Router. The router is set up as a Secure Network, using WPA encryption. The laptop wireless operation light toggles off/on correctly using Fn-F2 control keys.I can connect to an open or non-secured wireless router, & have verified that at my church, at the Public Library, and at Starbucks. However, I cannot successfully connect to a passworded secured wireless source. I tried to use a secured network connection at my church yesterday, and could not connect. It "tries & tries" and eventually gives up and displays a cannot-connect type of message.
The laptop has worked correctly for several years on my home wireless network. It only stopped working about 3 or 4 weeks ago. I cannot recall changing anything in setup; I probably did it accidentally.I've spent about 2 hours in a couple of sessions with SureWest tech support. They diagnosed router setup using direct connect to the router, plus they talked me through several attempts at configuring the wireless config setup on the laptop. Everything I reported to them on the config settings appeared to be just fine. They also deduced that the wireless config on the desktop & router was correct.SureWest techs finally concluded that something was wrong with my laptop software config or the hardware, disabling it from making a encrypted connection. That sounds right to me, now having witnessed the secured connection failure described above, at my church wireless site.
I've looked at all the refs & things I can think of, plus followed step-by-step directions a couple of times with the SureWest techs. They rightfully pointed out that they could not make a tech support repair call on what did not appear to be a SureWest-related problem.I can easily make screenshots of any config screens needed on the laptop & upload to this forum.
View 5 Replies
View Related
Sep 5, 2008
I have a linksys system WRT54G at home. I had no problems with the Linksys router until about a month ago when I decided to make it a secure network. I run three computers of the wireless router (1 desktp and 2 laptops) Since making the wireless network secure I can not connect with my business laptop IBM Thinkpad X40, but thother e computers work just fine.
View 8 Replies
View Related
Aug 27, 2012
I'm an experienced user with pcs but an absolute newbie with networking, so apologies if this is in the wrong section. I've moved into a new house that has a wireless widi (sp?) that my flatmate uses to play videos from his laptop on the tv. I asked if he still has the software he installed when he got it but he doesn't, and the software i've tried installing from searching the web hasn't worked. What should i do?
View 1 Replies
View Related
Mar 11, 2013
I'm used to seeing DWDM and muxes being used in the service provider world, but when and why would an enterprise want to use this kind of gear?The two basically lets you combine streams of signaling from many different physical sources into one media, but can't a VLAN trunk or a routed link, for example, do the same? Sure, they all operate at different layers of the OSI model, but in all cases you're still getting separate streams of data from Point A, putting it all on one wire, and sending it to Point B.
View 8 Replies
View Related
Apr 28, 2011
I have tried everything including removing the system, changing the network settings, using cmd.exe, ect. they all say access denied and theres no possible way to get around this.
View 2 Replies
View Related
Sep 3, 2011
We have 2 PCs connected to a ADSL modem router (which has 4 ports) to share files and internet connection. Unfortunately there is no IP address assigned to both the PCs. When i tried to assign the PC it gets disconnected from Internet.The problem is : i want to access the PCs through internet from a Laptop. When I ping the Public IP of that lan network, it works. But when i use the Remote Desktop to connect to the PC or when i use the DOS command NET USE x: \IPaddressharename /USER:username password - It doesn't work. In DOS prompt error 1231 or Network path not found error occurs.I followed the instruction to configure Remote Access like disabling firewall, no installation of any firewall software, My computer -> properties -> remote -> allow users to connect remotely this computer.
View 2 Replies
View Related
Feb 18, 2012
My laptop running windows XP all of a sudden wont hook up to IE just churns for a few seconds & stops . I did run spybot S&D on a recomendation & still wont hook up. It is on a wifi but I tried it at a local wifi spot & wont hook up there either , it shows a good wifi connection at both places . I am a novice so should I just take it to a repair shop or is there some tricks I can try ?
View 2 Replies
View Related
Oct 31, 2011
We have just got a new netgear router. Our Desktop PC , mobile phones, playstation all connect to it wirelessly with no problem. But although this Samsung Laptop shows as been connected to the new router it wont access the internet. I am using an ethernet cable at the moment. The laptop worked fine with the previous router which was also a netgear.
View 19 Replies
View Related
Nov 10, 2011
I would like to use the router at my friends house. I have a laptop, how do I connect to his router using my laptop?
View 1 Replies
View Related
Mar 2, 2011
im purchasing a new laptop i want to be able to use it wireless from the router but also i want it to be wired to the router so do i just need a basic ethernet cable for that?
View 10 Replies
View Related
Feb 3, 2012
My laptop and my android phone wifi's are working properly. However I'm unable to connect wifi in another laptop, a Toshiba Qosmio windows 7. The laptop detects the wifi connection but when I put the key for the wifi it does not connect. My old laptop and phone wifi are working fine. Just not the new laptop
View 7 Replies
View Related
Jul 22, 2012
I have connected my Belkin54 router to my desktop modem now I'm having problems connect my laptop with the router. I'm getting a message saying my setting aren't configured with the router and I have no idea where to go to have the setting configured with the router settings,
View 1 Replies
View Related
Jun 25, 2012
This is a problem i had after i reinstalled windows vista on my laptop. I recently reinstalled windows vista onto a laptop. The laptop is unable to find the router. I checked the drivers, and i am not sure if im missing any. There is a yellow mark on my network controller, but there is no description or details for it. The internet works while connected to an etherent cable directly to my router. I went to the manufacture website (dell), and downloaded/updated the drivers. I ran PC diagnostics and the wireless still doesn't work.
[code]....
View 4 Replies
View Related
Apr 10, 2011
Today I took out my old HP zd8228ea and tried to fix it. I inserted the XP home cd and got it running. Now I'm trying to get it on my wi-fi connection. Im pretty sure it has a wi-fi chip, though im not sure how to tell. And under my connections, it doesnt show wireless connection.
View 3 Replies
View Related
Jul 27, 2011
how i get net to desktop by connecting to laptop.
View 1 Replies
View Related
Jan 24, 2013
I have a netgear router. I have my kindle, 2 laptops, and a net book that are on the network. I bought my husband a "new" laptop. It will not accept the password in alphabet form.
View 1 Replies
View Related
Sep 10, 2011
I just got a linksys wireless adapter for my pc, but the cd drive won't read the setup disc. Is there a way to hook the laptop to the pc and load the program?
View 4 Replies
View Related
Jun 7, 2012
I have my friend's older computer here that's still running Windows 98 and it won't connect wirelessly to my home internet. It's been so long since I've dealt with 98 that I barely remember how to navigate the system so there isn't much I was able to do in trying to fix the problem myself.It's an HP compaq tc 4200, it's connected to my home internet before so all the information for the connection is there, it simply refuses to cooperate all of a sudden.
View 1 Replies
View Related
Apr 29, 2011
its possible to connect to the internet via usb adapter to my laptop, then connect an access point to my laptop so my ps3 can connect wireless?.....the reason i ask is my connection is on the 3rd floor, which cannot be moved, while my ps3 is in the basement and barely has a signal and keeps logging out out of psn....
View 3 Replies
View Related
Feb 17, 2011
Is it possible to connect a PC and Laptop together to network share, using a dial up USB dongle plugged in to either computer. I have a network connection cable if needed, but is it possible and how?
View 1 Replies
View Related
Jun 19, 2011
How to treat your enterprise network in terms of security? Do you firewall between sites? Between subnets? I've been a little gung-ho with packet filtering, and the more the network is growing the harder is becoming to make that scalable and manageable. It's looking like a pretty good idea to just open up access to/from all my sites. I'm going to continue locking down user areas where we can't necessarily trust the boxes, but all our server subnets I think can be opened up to unfettered access.
View 4 Replies
View Related
Aug 26, 2011
I want to change the SSID on all my APs without it affecting the connected devicesThe users should possible not be affected with the connecttion to the wifi networkHow can I go about it?
View 3 Replies
View Related
