Cisco Wireless :: WAP4410N WPA2 Enterprise Mixed Authentication

Oct 22, 2011

We have 3 x WAP4410N at new office setup in Singapore. Customer asked us to setup those 3 AP to make client auth against an ACS 4.2 sitting in US office. All the user notebooks were joined to Windows domain in US office, before sent out to Singapore office. We configured APs with WPA2 Enterprise Mixed mode and entered radius server address and secrects correctly. Logging from ACS shows that users are authenticated successfully but, on the user notebooks, authentication never seems successful and keeps authenticating.

View 10 Replies


ADVERTISEMENT

Cisco Wireless :: WAP4410N WPA2 Enterprise Reconnect Failed

Apr 26, 2010

We have a WAP4410N wireless ap configured for WPA2-Enterprise. Initially everything works. Issue the user the proper certificate and they sign on correctly but once they disconnect and try to reconnect later it get stuck on "Validating Identity". The request never get to RADIUS server (no success/failure log entry, no radius traffic). Once I reboot the access point everyone can connect again but as soon as they disconnect the problem happen again.We testing other security settings (WPA-ENT, RADIUS(!), WPA2-Personal etc) and no problems. With older firmware have the same issue.Operating system: XP SP3, RADIUS server: IAS. Firmware: 2.0.1.0

View 2 Replies View Related

1240AP - Setting Up WPA2-Enterprise Wireless Network

May 16, 2011

So I have been tasked with setting up WPA2-Enterprise on the network. Right now for testing I have a single Cisco 1240AP, and a test Windows Domain. The Windows domain is at 2003 functional level, but has been extended to have the Wireless policies, and we have a 2008 DC in the test network also.

Is there any definitive guide to setting up a WPA2-Enterprise wireless network? Most of what I find is mostly client side. I am trying to get the Group Policy setup to push down to the client machines.

View 4 Replies View Related

Cisco Wireless :: WAP4410N - What Does B/G/N Mixed Mode Do Exactly

Aug 29, 2011

The admin guide for the WAP4410N, explains the default setting for the Wireless Network Mode field:
 
"B/G/N-Mixed—(Default) Connects all the wireless client devices at their respective data rates in this mixed mode."
 
What does this mean exactly? Does it mean that I can have some clients using G at G speed; and some clients using N at the faster N speed? And both at the same time?
 
I can't see how that is possible as the AP only has one radio?If it is possible; then why is one of the options G only - that allows both G and N, but a G speeds only?
 
Should I set the Channel Bandwidth to 20Mhz or 40Mhz? The admin guide says that N will use 40Mhz and B/G will use 20Mhz. What is the difference in practice?

View 4 Replies View Related

Cisco :: WPA2 Enterprise With New ACS 5.x

May 21, 2013

Not sure if this belongs here on in a different section. We are in the process of purchasing a new ACS 5.x appliance. I would like to take a look at implementing WPA2 Enterprise with our Cisco APs.

View 4 Replies View Related

Cisco Wireless :: WAP4410N - Mode Bgn / Data Rate With Mixed G And N Clients

Jul 26, 2012

Does the data rate to N connected clients go down to G rate if there is even a single G client connected?

View 2 Replies View Related

Cisco :: How To Configure 1131 AP To Use WPA2 Enterprise

May 2, 2012

I have a Win2008 server set up as a radius server (192.168.32.71) and a stand alone AP (192.168.201.9) [code]

View 3 Replies View Related

WPA2 Enterprise Connecting Much Too Slowy On HP Laptop?

Oct 29, 2011

Recently bought a laptop HP Pavilion DM4 with Windows 7 home premium 64 bit for use in a college wireless environment. The school insists on WPA2 Enterprise connection, which is supposedly the recommended Microsoft security protocol for Win 7. I have all the correct settings, such that I can routinely connect to the wireless network but on this model HP I consistently get speeds way under 10kbs, while if I use EXACT same settings on a different Lenovo, Dell, or other models of HP get speeds of over 5MG. Yes 500x faster.Of course HP wanted to blame the network, but after sending 2 technicians to visit on campus, they agreed it was their hardware, so they sent a replacement unit. Unfortunately, the replacement unit has the EXACT same problem. BTW the problem computers do connect flawlessly to other wifi networks at full speed, just not the WPA2 Enterprise network.

View 1 Replies View Related

Cisco :: WLC 2106 WPA2 Enterprise Using Free Radius Starting Point

Mar 2, 2013

I have a WLC 2106 with two AP's connected, But have not set up any authentication. I don't have CSACS at my disposal, so I thought I would try FreeRadius on my Linux Server. I am looking for User/Password auth, and for now I would expect to have those accounts local to the FreeRadius engine. (baby steps before I try PAM/LDAP/AD/Certs )
 
I have seen a number of posts asking final step questions. I was looking for more of a where to begin How To.
 
I have read the docs on Free Radius, and believe I have the method worked out on how to make a small change, run in debug mod to observe my change, to verify that I don't spend too much time pulling out my hair. I am fairly adept at CSACS 5.3 but it hides the magic of Radius from me.

View 4 Replies View Related

Cisco Wireless :: Use WAP4410N As Repeater On WPA2 And EAP-TLS WLan

Dec 21, 2010

Can a WAP4410N be used as a repeater on an existing WPA2 + EAP-TLS WLAN? The existing WLAN is on a Cisco 871W router; we hope to use a WAP4410N as a repeater to extend it.
 
I've not had much luck so far with the "repeater" and "WDS repeater" AP modes on the 4410. I'm either configuring it wrong, or perhaps the 871W needs a config tweak? Or perhaps the 871's wireless can't be repeated like this?

View 4 Replies View Related

Linksys Wireless Router :: E4200v2 - Bizarre WPA2 Authentication Failure

May 3, 2012

Just installed 2 E4200v2's for a customer today.  Was very optimistic because they worked great in my lab, both for my Win7 laptop  a MacBook.  And after installing 1 on-site and testing w/ my laptop, it worked fine.BUT problems arose when I installed both at the same time (I don't think I ever did this in the lab) and then I tested some computers.  Every computer that I tested (except mine of course), cannot authenticate correctly using the WPA2 password.
 
For the Mac's they get the error "The wi-fi network... requires a WPA2 password" then after entering the *correct* pswd, it says "Invalid password".  They're a Mac shop, but I did try one other Win laptop and that also had a problem, and the error was something like "security mismatch" although I was rushed and didn't write it down.

View 2 Replies View Related

Cisco Wireless :: WAP4410N Multiple Access Points / One Authentication

Dec 7, 2011

My boss just asked me if there was a way for him to move from point A to Point B with his wireless laptop and NOT have to reauthenticate at point B if I install another access point there. Right now I have us setup on a Cisco WAP4410N Access Point that works well when he's within range of the antenna. The point B location is upstairs and while it's only about 50-70 feet away from the Point A access point the signal he's getting there is very weak so he wants me to install another AP there.
 
IOW he wants to authenticate once at point A and when he walks up to point B he wants the laptop to pickup the newer hotter signal when I put another AP point in.

View 3 Replies View Related

Cisco :: Configure WPA Or WPA2 Authentication On 1042N Access Points?

Mar 12, 2012

I need to configure WPA or WPA2 authentication on cisco 1042N access points. But I believe that for this requirement I need to have either an internal or external RADIUS server, but my customer want to just a normal WPA/WPA2 authentication like what we configure on cisco WAP200 or WAP4410 accesspoints, is there any work arounds to configure WPA/WPA2 authentication in a simpler manner rather than configuring RADIUS server option?

View 2 Replies View Related

Cisco :: Mac Authentication By IAS In WAP4410N

Feb 20, 2012

I have a access point model WAP4410N , I want to configure for mac authentication by using MS IAS , but when I set MY SSID to radius in wireless connection control and try to connect to that SSID by a laptop I didn't get any logs in my IAS. My methods for radius mac authentication is correct or not ?

View 1 Replies View Related

Cisco Wireless :: 802.11 WAP4410N To WAP4410N Backhaul Using N Protocol?

Apr 30, 2011

I have the following equipment:
 
Cisco 871W router
2x WAP 4410N APs running 2.0.3.3

I currently have 1 AP connected to the router via copper.  The AP to AP link is over 802.11.  I have attached a diagram reflecting the current topology.
 
The AP-to-AP link will come up utilizing B/G/N mixed mode; however, the connection is basically unusable.  About 30% of the traffic is dropped, while the packets that do make it have a consistently volatile latency, anywhere from 15 to 1500 ms. I have had success using G-only and B/G mixed.  The link is stable (I have had the best results with B/G).  The problem is, I didn't buy the 2nd 4410N to run the G protocol.  I would like to connect the APs running either B/G/N (hopefully negotiating to N) or N only.  I am wondering if there is a certain configuration I can utilize (perhaps using WDS repeater or bridge versus Wireless Client/Repeater?), or a firmware upgrade set for release that can make this happen for me.

View 1 Replies View Related

Cisco Wireless :: How New 1260 Will Work In Mixed Environment

Aug 2, 2011

I am looking to slowly migrate some of our wireless devices (Aironet 1231 and 1232's) to the Wireless N spec - 1260's.I currently have four AP locations that I want to upgrade first before anywhere else. At the minute, these four AP's work on the 2.4Ghz G band.
 
how the new 1260's will work in the mixed environment. I believe I will need to purchase the 1262 (which is the dual band version) so that I can operate the AP in both the 2.4Ghz G band range and the 5Ghz N range at the same time, is this correct?If I was to purchase the 1261 (which is the single band version), will I only be able to operate in either th 2.4Ghz or 5Ghz, but not at the same time?
 
For the mixed environment, would you suggest the dual band version? Can I place the same SSID on multiple Radios if this is the case? Following example: Say I have the SSID called 'Company' - this at the minute is operating on the G band 2.4Ghz range. If I was to purcahse the dual band 1262, could I put this SSID on both the G radio and the N radio? Would clients with an N adapter automatically connect to the 5Ghz range (N Radio) and legacy G and B adapters automatically connect to the 2.4Ghz (G Radio)?

View 5 Replies View Related

Cisco Wireless :: 5508 Office Extend Working In Mixed Environment

Feb 4, 2010

If we have a mixed environment of 4400 and 5500 controllers will the office extend features still work or will we have to run a seperate wireless domain from the 5508 for the aps that we need office extend on?

View 2 Replies View Related

Linksys Wireless Router :: WRT120N Wi-Fi Speed On Mixed And N Settings

Jan 7, 2012

I just bought a new WRT120N router and it works perfectly on cable and Wi-Fi with one major issue on Wi-Fi. If i connect my phone or any phone for that matter that knows N speed the connection speed is 65Mbps and that is fine as all phones are limited to this speed over Wi-Fi. When I connect a Sony laptop that has N connection speed up to 300 Mpbs the connection speed shows as 65Mpbs. Are there any special settings I have to do to make the connection at least 100 or 120 Mpbs? What is the maximum connection speed of this model because I couldn't find any information about this. I did some digging on google and found that some people have connection speed of 120 Mpbs but they didn't give any advice on the settings they used or how they got to this speed. Keep in mid that I am refering to the connection speed now the actual download speed. So what settings I have to do to get at least 100 Mpbs speed connection?
 
LE: I would prefer a setting that would alow me to connect a Galaxy Nexus phone an iPhone 3G and the Sony laptop so that all of them will be connected at the maximum speed suported by that specific device.

View 9 Replies View Related

Linksys Wireless Router :: WRT350N Only Connects At G Speeds In Mixed Mode

Sep 15, 2011

I have a Dell Wireless 1500 draft N adapter that only connects at G speeds in mixed mode. I tried N only mode and my adapter will not connect. I have tried N mode Auto and 40hz wide and nogo. I have tried TKIP + AES and AES and nogo.  

View 1 Replies View Related

Cisco Wireless :: Could Not Install Red Hat Enterprise 5.0 On MSE 3355

Jun 26, 2012

I want to reinstall the MSE image that was sent to me by Cisco TAC Team, however when I try to reinstall the MSE Application, however when I try to install it, the CD boots and show me the Red Hat enterprise image, then sends me black screen with the message "Kernel alive, Kernel direct mapping tables up to 480000000 @ 8000-1b000" and it stay there.

View 2 Replies View Related

Cisco Wireless :: Enterprise MESH In Release 7.0 MR1

May 11, 2011

I'm looking for documentation on the Enterprise mesh solution based on 7.0 MR1...In this release e.g 802.11n APs are supported and clean air for the client radio etc...The current Cisco Mesh Access Points, Design and Deployment Guide is based on the previous 7.0 release.Apart from the configuration guide I can't find any additional guides.

View 1 Replies View Related

MSM410 Wireless Enterprise Deployment / HP Or Ubiquiti

Jan 13, 2013

I currently work for an enterprise that want to deploy wireless network (6AP for now) and I'm the one who will manage and install it.I had initially planed to deploy Ubiquiti network because I've heard lot of good thing about them. But they did not wait me and bought (crappy?) HP access point (MSM410)

What do you think about HP wireless network ? They did not yet buy the access point controller and I'm not sure they want to buy one.I can't find any review on the HP solutions it looks like no one is using it.

Do you recommend me to continue with the HP solution and buy a HP controller or go with Ubiquiti and rebuy the access points (no so much expensive in comparison with the price of the HP controller alone)

View 19 Replies View Related

Cisco Wireless :: 1552E - Outdoor Enterprise Mesh 802.11n Deployment

Jul 20, 2011

Is Cisco WCS mandatory when deploying an outdoor enterprise mesh solution?If I am goin to use the 1552E purely as an outdoor access point ,do I really need the Cisco WCS?

View 2 Replies View Related

Gigabit Mixed With Fast Ethernet?

Oct 7, 2011

I currently have 2 PCs that are directly connected to each other via a 1Gbs Cat6 connection.I don't currently have a 1Gbs router so what I am doing right now is unhooking this connection and reconnecting both machines to my router when I need internet access. I have ordered some USB Wi-Fi adapters so I can have both machines access the internet that way whilst still use FTP between them on the 1Gbs line.If I were to scrap that idea and get a 1Gbs hub, connect both PCs straight into that, and then also connect the hub to my 100mbits router, would the 2 computers be able to communicate with each other at 1Gbs and then talk to the router at 100mbits, or would the whole network run at 100mbits.I don't really want to have to shell out on a 1Gbs router as I don't need anything else on the network to run at that speed.

View 6 Replies View Related

Cisco Firewall :: How To Create Mixed Service Ports On ASA 8.4(2)

May 14, 2013

How to create a mixed service ports on ASA 8.4(2)?I need to create a service group which has ICMP, TCP ports and also different UDP ports.Normally you would create different service group based on TCP/UDP/TCP-UDP/ICMP/Protocol and add then to new nested service group.But I want to create a new service group where you can define everything without the need to different service groups and nesting them into a new one.

View 1 Replies View Related

Cisco :: LMS 4.2.2 3750x And 3750 Mixed Stack Upgrade

Oct 10, 2012

I'm trying to use LMS to upgrade a stack of switches that have 1 or more 3750x's and other 3750's.  In Software Distribution, if I choose Distrube to devices, basic, it finds the x switch, which is the master but says the others are not candidates.  I don't see a place where I can tell it it is a mixes stack and choose multiple IOS's.

View 2 Replies View Related

Tried To Add New PC To Mixed Network Printer Quit Working

Jan 29, 2013

We have a non-wireless network of Macs at work and occasionally have a PC laptop connected with an ethernet cable. Everything worked well until the owner of the PC got a new one, and tried to install drivers for our HP printer using the original HP install disk. Now none of the computers can connect with the printer. What happened? How can I correct this? The Macs all run OSX 10.5.8. The Windows operating system is, I believe, XP.

View 3 Replies View Related

Port Forward Is Mixed Up After A Power Outage?

Aug 23, 2012

So my den pc is 192.168.1.4 and the kids xbox is 192.168.1.6 well i set the port forwards for my ip address for my security cameras and I set the kids portforward for the xbox. Well after a power outage, the power comes back on and randomly assigns everything a new address. Well the portforward for the secuirty cam might be on the xbox, or the laptop or the guest pc or my den pc at random?

View 2 Replies View Related

Does Mixed Powerline AV 500 And 200 Network Slow Down 500 Nodes

Aug 30, 2011

I have two netgear powerline AV 500 ethernet adapters that give me near ideal internet access on my media computer (FIOS 25/25mpbs tests out at 8ms 25.4/24.7) and perhaps 100-140mbps to my router, printer, drive, etc. I now want to add a few wifi points and instead of having the mess of a powerline adapter + a wifi router I think it will be neater to have an all in one solution. Most of the ones that I find are 200mbps, however. I know that 500 is backwards compatible, but will a mixed solution slow everything down like it can for a mixed wireless g/n network?

View 2 Replies View Related

Cisco Switching/Routing :: Mixed 3750-X And 3750G In A Stack?

Jul 17, 2012

Any one try to form a stack with mixed 3750-X and 3750G? Is there any prerequisites in hardware and software?

View 5 Replies View Related

Cisco WAN :: Mixed Stack C3750G And C3750X IOS Update Required

Sep 6, 2011

I have running a Stack with two C3750G-24TS-S1U with the IOS c3750-ipbasek9-mz.122-50.SE3.Now I want put a new C3750X-24T-S in the existing stack. I have read this is possible. I have running a other mixed stack with a C3750G-12S and an C3750E-48TD. Its running fine until I want to make an IOS update. The update was done with the CW LMS 3.1. After the automatic update and restart only the C3750E had an new IOS the C3750G doesn't have any IOS. Do I have the same problem with the mixed Stack C3750G and C3750X?Do I have to upgrade the IOS by copying the different IOS Versions ( c3750-ipbasek9-mz.122-50.SE3 / c3750e-ipbasek9-mz.122-50.SE3) to every switch ?

View 5 Replies View Related

Cisco Application :: 47XX - Run Mixed VMware Cluster Version 3.5 And 4.1 On ACE

Jun 28, 2011

I have a CAS array for Exchange 2010 configured to loadbalance on my Cisco ACE 47XX. My question is: Can I run a mixed VMware cluster version 3.5 and 4.1 on my ACE? I am experiencing is dropped RPC connections and I was wondering if that could be the cause of it or maybe I am misconfigured something on the ACE
 
Another question:Should I seperate the two cluster versions on their own serverfarm and than loadbalance the farms? What I mean is serverfarm 3.5 and serverfarm 4.1 and than loadbalance them.

View 3 Replies View Related

Cisco WAN :: Mixed Feature Sets In 3750 Stack - Fully Supported?

Jun 21, 2011

What is supported in terms of running a mixed feature set in a Cisco 3750 switch stack.We are looking at setting up a stack consisting of 5 x 3750V2 and 2 x 3750G. Due to a requirement for full EIGRP we need the IP Services feature set. Is it a supported configuration to run with 2 or 3 switches running the IP Services feature set as stack masters and the others running IP Base? I understand that if stack master priorities were set these switches with the higher feature set could manage the stack and offer IP Services accross the stack. If we were to lose all of the switches running IP Services the stack would drop back to IP Base.I am looking for guidance as to if this is a supported configuration and not in breach of licensing? Is this likely to cause any problem other than above now and for future IOS releases?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved