Cisco Wireless :: 5508 Office Extend Working In Mixed Environment

Feb 4, 2010

If we have a mixed environment of 4400 and 5500 controllers will the office extend features still work or will we have to run a seperate wireless domain from the 5508 for the aps that we need office extend on?

View 2 Replies


ADVERTISEMENT

Cisco Wireless :: 5508 / Office Extend AP Setup?

Jul 6, 2010

I have finally got my office extend AP to connect to my companies 5508 controller by enabling NAT on the management interface and can see all the cooperate SSID's. However when I try to connect to the SSID my client either gets a local IP address from my home router or then cannot get any IP address.

View 9 Replies View Related

Cisco Wireless :: 5508 Office Extend Internal External?

Dec 18, 2011

I am having an issue with internal and external clients. When we have the nat ip configured on the controller we cannot connect internal ap's at all. When we take the nat ip out it works fine. We are on code 7.0.220. I have tried the following command  <config network ap-discovery nat-ip-only disable> and it did nothing.

View 1 Replies View Related

Cisco Wireless :: 5508 - Multiple Office Extend APs Behind NAT To Single Address

Feb 29, 2012

I have a situation where a user needs more than one office extend AP in his home. My office extend controller is a 5508 running 7.0.220.0. Are there any issues NATing multiple OE APs to a single address? My initial lab results indicate that each of the AP's associate with the controller and establish a DTLS tunnel. I see the SSIDs get pushed to the AP and then it seems to restart the process never being fully operational. Is there a workaround that will allow me to run mutliple OE APs?

View 12 Replies View Related

Cisco Wireless :: 5508 Office Extend And Guest WLAN Setup

Aug 28, 2011

We're looking at deploying both office extend and also a guest wlan. Both would require a WLC in the DMZ.My question is can one 5508 WLC be both a guest anchor and have office extend APs on it at the same time?

View 2 Replies View Related

Cisco :: Office Extend SOHO AP Cannot Connect To 5508

Feb 2, 2012

How the ACL Ports/Protocols which must be opened (in- and outbound) to enable a communication between a CISCO Office extend AP and a 5508 WCS.

View 3 Replies View Related

Cisco :: 5508 / 4402 - Office Extend Suggestion

Dec 15, 2011

I have attached a diagram of the current topology. At present, we have two 5508 connected to our core. We also have a 4402 behind the firewall (DMZ) just purely for guest access. So the staff users connect to the access point which in turns connects to the Staff WLC 1 (if this fails then to Staff WLC2). any guest user connect to the access point which in turn connects to Staff WLC which anchors to Guest WLC which then provides access. Since the guest is behind the DMZ they can only access the internet and not out internal network.
 
Now we want to office extend our network - we want our users to use 1132 AP at home to access the Infrastructure. is there a way we can do this without disturbing the existing infrastructure. On reading Cisco website, i know the best practice is to use 2 5508 (one behind the firewall and the other anchored to this access the internet network ) i thought since we have a Cisco (dmz) switch (48 port) and only the 4402  (Guest WLC) is connected to it, maybe purchase another 5508 WLC and connect to the 48 port Cisco (dmz) switch. will this work?

View 13 Replies View Related

Cisco Wireless :: How New 1260 Will Work In Mixed Environment

Aug 2, 2011

I am looking to slowly migrate some of our wireless devices (Aironet 1231 and 1232's) to the Wireless N spec - 1260's.I currently have four AP locations that I want to upgrade first before anywhere else. At the minute, these four AP's work on the 2.4Ghz G band.
 
how the new 1260's will work in the mixed environment. I believe I will need to purchase the 1262 (which is the dual band version) so that I can operate the AP in both the 2.4Ghz G band range and the 5Ghz N range at the same time, is this correct?If I was to purchase the 1261 (which is the single band version), will I only be able to operate in either th 2.4Ghz or 5Ghz, but not at the same time?
 
For the mixed environment, would you suggest the dual band version? Can I place the same SSID on multiple Radios if this is the case? Following example: Say I have the SSID called 'Company' - this at the minute is operating on the G band 2.4Ghz range. If I was to purcahse the dual band 1262, could I put this SSID on both the G radio and the N radio? Would clients with an N adapter automatically connect to the 5Ghz range (N Radio) and legacy G and B adapters automatically connect to the 2.4Ghz (G Radio)?

View 5 Replies View Related

Cisco Wireless :: 881W Office Extend Ap Login?

Jan 17, 2011

Just recently got a new 881W router. i have downloaded the 2.4 software upgrade. I go into the Office extend AP login and i get just a enter button. when i click on the enter button the AP page does not come up.

View 7 Replies View Related

Cisco Wireless :: Does 3600 Support Office Extend Feature

Feb 13, 2012

Does cisco 3600 support office extend feature? If yes, is there a controller requirement? I know cisco AP 600 supports office extend

View 24 Replies View Related

Cisco Wireless :: AP 1131 As Office Extend With Local Ssid?

Feb 15, 2012

I have an 1131ag AP attached to our 5508 as an OEAP over the Internet.  Everything with the corporate SSIDs is working correctly, so no issue there.  I was wondering if a local ssid can be configured on the AP, similar to what can be done with the OEAP600, in order to provide wireless access to the Internet only?  On the WLC, on the H_REAP tab, there is a button labeled "Reset Personal SSID"

View 3 Replies View Related

Cisco Wireless :: Office Extend 1142 And Dtls Keepalive Failure

Jan 18, 2013

I am setting up office extend with 1142 APs on a 5508 controller.  All seems ok and I see my SSIDs on the remote AP.   However when I try to connect I don't get a dhcp address and the connection fails.  When I look at logs and some debugs I see dtls keepalive failures and the AP is actually disconnecting and re-associating with the controller.

View 24 Replies View Related

Cisco Wireless :: BYOD Environment For Android WLC 5508

Mar 18, 2013

We have the following BYOD environment:

WLC 5508 (7.4.100.0)Cisco Identity Services EngineVersion : 1.1.2.145 Patch Version : 3 

During BOYD implementation we faced some problems with Android devices:

1) The Netwrok Setup Assistant (NSA) download process corrupts during the self-provisioning process (captured on 4.1.1 and 4.2.2 version)
2) If NSA is already installed, the network setup process (downloading profile, certificate) stops at last step: connecting to network, meanwhile the connection itself successfully establishes. This bug is captured on 4.2.2 version, 4.1.1 is ok.
 
Google ACL is configured according to TrustSec docs and permits all traffic to google networks 173.194.0.0/16 and 74.125.0.0/16.

View 5 Replies View Related

Tried To Add New PC To Mixed Network Printer Quit Working

Jan 29, 2013

We have a non-wireless network of Macs at work and occasionally have a PC laptop connected with an ethernet cable. Everything worked well until the owner of the PC got a new one, and tried to install drivers for our HP printer using the original HP install disk. Now none of the computers can connect with the printer. What happened? How can I correct this? The Macs all run OSX 10.5.8. The Windows operating system is, I believe, XP.

View 3 Replies View Related

Cisco Wireless :: 5508 / Extend The Length Of Time Between Password Changes For Users Connected?

Mar 13, 2012

Recently i have setup a WLAN with inside and anchor 5508 controllers. Standard setup. However, one issue I have is I wish to extend the length of time between password changes for users connected in on the guest wlan. At the moment, 30 is max. I dont have an option on the controller to creat accounts for any longer than that. How to I extend it to 90 days or 120 days?

View 1 Replies View Related

Can't Get Remote Desktop Working In Work Environment

Oct 4, 2011

I'm trying to use RDC to connect to my home PC from work. I've tested everything on my laptop from another network and the connection works fine but the same settings don't seem to work when I'm at work.

I'm pretty sure I have everything set up correctly. Using the default port forwarded to the desired computer.

View 1 Replies View Related

Office Network Stopped Working Sometime?

Oct 19, 2011

Sometimes my office network stopped than work lan cable good but network problem more than time same problem.

View 1 Replies View Related

Cisco Wireless :: SSO Not Working On 5508

Jun 4, 2013

I am trying to setup SSO between my primary and secondary 5508 controller, and it doesn't appear to be working. I lose connection to both devices after the reboot and then have to console in and disable redundancy manually to regain connectivity. Is there something special required for this to work that isn't apparent?

View 4 Replies View Related

Cisco Wireless :: 5508 - Tacacs Not Working

Oct 24, 2011

Tacacs not working for 3 new 5508 WLC's...working fine for 6 old 4400 WLC's.
 
Before 7.116 code upgrade...I remember 5508 was working on and off and now they are not.
 
Same configs on SW, WLC and ACS.
 
Debug on WLC gives..below message when Tacacs is attempted..
*aaaQueueReader: Oct 25 09:20:41.700: tplus_processAuthRequest: memory alloc failed for tplus
 
Not sure why statistics show zero...?? Radius is working for users.
 
(wlc03) >show tacacs auth statistics

Authentication Servers:
 
Server Index..................................... 1
Server Address................................... 10.3.121.21
Msg Round Trip Time.............................. 0 (msec)
First Requests................................... 0
Retry Requests................................... 0
Accept Responses................................. 0
Reject Responses................................. 0
 
[ Code].....

View 7 Replies View Related

Cisco Wireless :: AIR-LAP1310N-E-K9 Not Working With 5508

Sep 13, 2012

We had cisco 5508 with 6.0.182.0All 1041 and 1310 worked fine with 5508. Then we upgraded controller to 7.2.110.0.
1041 still worked, but 1310 - no.

Error: Sep 14 14:11:19.248: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY

View 2 Replies View Related

Cisco Wireless :: WAP4410N - What Does B/G/N Mixed Mode Do Exactly

Aug 29, 2011

The admin guide for the WAP4410N, explains the default setting for the Wireless Network Mode field:
 
"B/G/N-Mixed—(Default) Connects all the wireless client devices at their respective data rates in this mixed mode."
 
What does this mean exactly? Does it mean that I can have some clients using G at G speed; and some clients using N at the faster N speed? And both at the same time?
 
I can't see how that is possible as the AP only has one radio?If it is possible; then why is one of the options G only - that allows both G and N, but a G speeds only?
 
Should I set the Channel Bandwidth to 20Mhz or 40Mhz? The admin guide says that N will use 40Mhz and B/G will use 20Mhz. What is the difference in practice?

View 4 Replies View Related

Cisco Wireless :: New 5508 DHCP For Management VLAN Not Working?

Sep 25, 2012

I have a new 5508 that I am setting up.  My first one from scratch.
 
Interfaces:
managment -> 10.10.10.10 ->dhcp 10.10.10.1
voice -> 10.10.7.1 ->dhcp 10.10.10.1
guest -> 192.168.1.2 ->dhcp 192.168.1.2
 
Local DHCP (via the 5508) is for the guest network while the management and voice use the Windows DHCP server.
 
My problem, Voice and guest work fine.  I have two SSID's (one 802.1X and the other PSK) that use the management interface that will not get an IP.  I have enabled  dhcp proxy from the cli on the controller.  I tried with the management VLAN tagged and untagged.

View 2 Replies View Related

Cisco Wireless :: WLC 5508 Software Version Working With ISE1.1.2?

Feb 24, 2013

My understanding is that for fully WLC 5508 integration with ISE 1.1.2, it needs Version 7.2.103.0.  Question is if customer has 5508 with either 7.0.230 or 7.0.98, and ISE 1.1.2, can AAA part work?  what part will not work, any potential issue if they don't upgrade 5508 to 7.2.103?

View 2 Replies View Related

Cisco Wireless :: WAP4410N WPA2 Enterprise Mixed Authentication

Oct 22, 2011

We have 3 x WAP4410N at new office setup in Singapore. Customer asked us to setup those 3 AP to make client auth against an ACS 4.2 sitting in US office. All the user notebooks were joined to Windows domain in US office, before sent out to Singapore office. We configured APs with WPA2 Enterprise Mixed mode and entered radius server address and secrects correctly. Logging from ACS shows that users are authenticated successfully but, on the user notebooks, authentication never seems successful and keeps authenticating.

View 10 Replies View Related

Cisco Wireless :: 5508 - Apple OS 6 Not Working On Open Access Network

Sep 24, 2012

I am beginning to get many emails from users who have recently upgraded to OS6 and saying now they cannot connect to our open access wireless network. We use a separate server that users must agree to a user agreement page and they say they get it, but after agreeing, it goes blank and they cannot connect. I am using mostly Cisco 3502's with the 5508 controller using 7.0.112.0 IOS version. Nobody in our IT department has yet to test OS6 yet.

View 9 Replies View Related

Cisco Wireless :: Why Is Web Page Auth On MAC Filter Failure Also Not Working On 5508

Jul 22, 2012

I have implemented a Guest WLAN solution as per the recommended design from Cisco. We have two internal WiSM2 controllers providing services for Internal secure SSIDs. Both these controllers are members of a Mobility and RF management group.
 
Two 5508 controllers have been installed in our DMZ for resilience and have been placed into a separate Mobility group. All controllers (internal and external) have been linked together as mobility neighbours in a full mesh and a new SSID for Web Guest traffic has been anchored to the controllers in the DMZ.
 
Web page authentication works perfectly fine, but I cannot for the life of me get the MAC filtering override to work, i.e. if a MAC address is present, do not redirect to the splash page for web auth. I know I can get around this by just creating two separate SSIDs. But the business is used to just having the one SSID for all guest traffic. Is this a known limitation when anchoring SSIDs to controllers in the DMZ ?

View 1 Replies View Related

Cisco Wireless :: WAP4410N - Mode Bgn / Data Rate With Mixed G And N Clients

Jul 26, 2012

Does the data rate to N connected clients go down to G rate if there is even a single G client connected?

View 2 Replies View Related

Linksys Wireless Router :: WRT120N Wi-Fi Speed On Mixed And N Settings

Jan 7, 2012

I just bought a new WRT120N router and it works perfectly on cable and Wi-Fi with one major issue on Wi-Fi. If i connect my phone or any phone for that matter that knows N speed the connection speed is 65Mbps and that is fine as all phones are limited to this speed over Wi-Fi. When I connect a Sony laptop that has N connection speed up to 300 Mpbs the connection speed shows as 65Mpbs. Are there any special settings I have to do to make the connection at least 100 or 120 Mpbs? What is the maximum connection speed of this model because I couldn't find any information about this. I did some digging on google and found that some people have connection speed of 120 Mpbs but they didn't give any advice on the settings they used or how they got to this speed. Keep in mid that I am refering to the connection speed now the actual download speed. So what settings I have to do to get at least 100 Mpbs speed connection?
 
LE: I would prefer a setting that would alow me to connect a Galaxy Nexus phone an iPhone 3G and the Sony laptop so that all of them will be connected at the maximum speed suported by that specific device.

View 9 Replies View Related

Cisco Wireless :: 5508 - WebPage Auth On MAC Filter Failure Not Working On Anchor

Nov 1, 2011

I have implemented a Guest WLAN solution as per the recommended design from Cisco. We have two internal WiSM2 controllers providing services for Internal secure SSIDs. Both these controllers are members of a Mobility and RF management group.
 
Two 5508 controllers have been installed in our DMZ for resilience and have been placed into a separate Mobility group. All controllers (internal and external) have been linked together as mobility neighbours in a full mesh and a new SSID for Web Guest traffic has been anchored to the controllers in the DMZ.
 
Web page authentication works perfectly fine, but I cannot for the life of me get the MAC filtering override to work, i.e. if a MAC address is present, do not redirect to the splash page for web auth.

View 6 Replies View Related

Linksys Wireless Router :: WRT350N Only Connects At G Speeds In Mixed Mode

Sep 15, 2011

I have a Dell Wireless 1500 draft N adapter that only connects at G speeds in mixed mode. I tried N only mode and my adapter will not connect. I have tried N mode Auto and 40hz wide and nogo. I have tried TKIP + AES and AES and nogo.  

View 1 Replies View Related

Cisco Wireless :: 1042n Configured As WGB In Lightweight Environment

Nov 8, 2012

Here is what I am attempting to do.
 
1.  I have a 1042N AP configured as a Workgroup-Bridge attaching to a Lightweight Access Point.
 
2.  LWAPP AP is on a 5508 series Controller.
 
3.  I have MAC Authentication configured through an Ciso ACS box running 5.2 code. And that portion is working.
 
4. I want to lock this WGB down even further with a second layer of security. I am thinking WPA2 -AES.

View 2 Replies View Related

Cisco :: AP1200 Securing Open Wireless Environment

Apr 26, 2011

Need securing a wireless environment in a hotel?  The SSID has to be broadcast of course but how can we protect guests from man in the middle attacks, etc.?  Currently the environment is all AP1200s with no hardware upgrades in the near future.  There is also a 2811 router in place but nothing else.  We would love to be able to force users to authenticate with a password in order to get out to the Internet as well.

View 2 Replies View Related

Cisco Wireless :: AIR-AP1231G-A-K9 And Controller Based Environment With Prime NCS

Apr 15, 2012

I can't find any information that the AP1231G-A-K9 AP is supported in a 5508 Controller Based environment with Prime NCS.Could one of the experts confirm or deny?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved