Cisco :: Office Extend SOHO AP Cannot Connect To 5508
Feb 2, 2012How the ACL Ports/Protocols which must be opened (in- and outbound) to enable a communication between a CISCO Office extend AP and a 5508 WCS.
View 3 Replies
ADVERTISEMENT
Cisco Wireless :: 5508 / Office Extend AP Setup?
Jul 6, 2010I have finally got my office extend AP to connect to my companies 5508 controller by enabling NAT on the management interface and can see all the cooperate SSID's. However when I try to connect to the SSID my client either gets a local IP address from my home router or then cannot get any IP address.
View 9 Replies View RelatedCisco :: 5508 / 4402 - Office Extend Suggestion
Dec 15, 2011I have attached a diagram of the current topology. At present, we have two 5508 connected to our core. We also have a 4402 behind the firewall (DMZ) just purely for guest access. So the staff users connect to the access point which in turns connects to the Staff WLC 1 (if this fails then to Staff WLC2). any guest user connect to the access point which in turn connects to Staff WLC which anchors to Guest WLC which then provides access. Since the guest is behind the DMZ they can only access the internet and not out internal network.
Now we want to office extend our network - we want our users to use 1132 AP at home to access the Infrastructure. is there a way we can do this without disturbing the existing infrastructure. On reading Cisco website, i know the best practice is to use 2 5508 (one behind the firewall and the other anchored to this access the internet network ) i thought since we have a Cisco (dmz) switch (48 port) and only the 4402 (Guest WLC) is connected to it, maybe purchase another 5508 WLC and connect to the 48 port Cisco (dmz) switch. will this work?
Cisco Wireless :: 5508 Office Extend Internal External?
Dec 18, 2011I am having an issue with internal and external clients. When we have the nat ip configured on the controller we cannot connect internal ap's at all. When we take the nat ip out it works fine. We are on code 7.0.220. I have tried the following command <config network ap-discovery nat-ip-only disable> and it did nothing.
View 1 Replies View RelatedCisco Wireless :: 5508 Office Extend Working In Mixed Environment
Feb 4, 2010If we have a mixed environment of 4400 and 5500 controllers will the office extend features still work or will we have to run a seperate wireless domain from the 5508 for the aps that we need office extend on?
View 2 Replies View RelatedCisco Wireless :: 5508 - Multiple Office Extend APs Behind NAT To Single Address
Feb 29, 2012I have a situation where a user needs more than one office extend AP in his home. My office extend controller is a 5508 running 7.0.220.0. Are there any issues NATing multiple OE APs to a single address? My initial lab results indicate that each of the AP's associate with the controller and establish a DTLS tunnel. I see the SSIDs get pushed to the AP and then it seems to restart the process never being fully operational. Is there a workaround that will allow me to run mutliple OE APs?
View 12 Replies View RelatedCisco Wireless :: 5508 Office Extend And Guest WLAN Setup
Aug 28, 2011We're looking at deploying both office extend and also a guest wlan. Both would require a WLC in the DMZ.My question is can one 5508 WLC be both a guest anchor and have office extend APs on it at the same time?
View 2 Replies View RelatedCisco Wireless :: 881W Office Extend Ap Login?
Jan 17, 2011Just recently got a new 881W router. i have downloaded the 2.4 software upgrade. I go into the Office extend AP login and i get just a enter button. when i click on the enter button the AP page does not come up.
View 7 Replies View RelatedCisco Wireless :: Does 3600 Support Office Extend Feature
Feb 13, 2012Does cisco 3600 support office extend feature? If yes, is there a controller requirement? I know cisco AP 600 supports office extend
View 24 Replies View RelatedCisco Wireless :: AP 1131 As Office Extend With Local Ssid?
Feb 15, 2012I have an 1131ag AP attached to our 5508 as an OEAP over the Internet. Everything with the corporate SSIDs is working correctly, so no issue there. I was wondering if a local ssid can be configured on the AP, similar to what can be done with the OEAP600, in order to provide wireless access to the Internet only? On the WLC, on the H_REAP tab, there is a button labeled "Reset Personal SSID"
View 3 Replies View RelatedCisco Wireless :: Office Extend 1142 And Dtls Keepalive Failure
Jan 18, 2013I am setting up office extend with 1142 APs on a 5508 controller. All seems ok and I see my SSIDs on the remote AP. However when I try to connect I don't get a dhcp address and the connection fails. When I look at logs and some debugs I see dtls keepalive failures and the AP is actually disconnecting and re-associating with the controller.
View 24 Replies View RelatedCisco Wireless :: 5508 / Extend The Length Of Time Between Password Changes For Users Connected?
Mar 13, 2012Recently i have setup a WLAN with inside and anchor 5508 controllers. Standard setup. However, one issue I have is I wish to extend the length of time between password changes for users connected in on the guest wlan. At the moment, 30 is max. I dont have an option on the controller to creat accounts for any longer than that. How to I extend it to 90 days or 120 days?
View 1 Replies View RelatedCisco WAN :: To Configure Soho 91
Dec 2, 2011I am relatively new to Cisco CLI and on the diagram that I am attaching I want the 2008 server to do DHCP for everything behind E0 on the Soho 91. I have tried multiple configs and I seem to get close but never quite get it. I am thinking that adding a DHCP helper on E0 will work but I am not sure.
This is my current show run:
clock timezone akst -9
clock summer-time akdt recurring
no aaa new-model
[Code] ....
Cisco Infrastructure :: 801 - SoHo Router Recommendation
Sep 27, 2012My team were going to purchase the Cisco 801's to build our SoHo. However, they are now EOL.
View 1 Replies View RelatedCisco :: SOHO 97 ADSL Configuration And Port Forwarding?
May 15, 2012I have an ADSL connection which I would like to have my Cisco Soho 97 ADSL router configured to dialup and forward to port 8080.
My network is 192.168.1.0/24
Router is 192.168.1.1
Server is 192.168.1.4 - Default gateway is 192.168.1.1
I am able to connect using the script below and get a public ip address but i cant get it to connect to the internet?what command to use for port forwarding to 8080?
hostname Router
!
!
ip subnet-zero
ip name-server 212.23.8.1
ip name-server 212.23.3.1
ip dhcp excluded-address 192.168.1.1
[code]...
Routers / Switches :: Public IPs Using A Soho Router?
Mar 7, 2011How can I give endpoints public IPs, that I can remote to or access (electronic whiteboard) from the Internet using a soho router? Will I need to purchase more than one public IPs or is there something I can do with subnet masking?
View 1 Replies View RelatedD-Link DIR-655 :: Connect Two Routers To Extend Wireless Range?
May 15, 2011I have two Dir-655's - router1 and router2.
Router1:
ip 192.168.0.1
subnet 255.255.255.0
DHCP enabled range = 192.168.0.100 to 192.168.0.200
Router 2:
ip 192.168.0.2
subnet 255.255.255.0
DHCP disabled
Routers are connected to each other via LAN ports with a switch in between.Both routers have the same wireless SSID with the same password. I am able to connect wirelessly to both routers no problem.
I have a machine running a shared iTunes library which has a wired connection to router1. I also have an Apple TV wired to router2. My issue is if I am connected wirelessly to router2 I may or may not be able to connect to iTunes library. Conversely, if I am connected wirelessly to router1 I may or may not be able to play content from iTunes to Apple TV. I cannot figure out why everything works fine sometimes yet at other times I cannot connect devices between the two routers.
Cisco WAN :: Linksys E1000 - Telnet To Private IP Through Soho Router?
Sep 22, 2011My Setup / I've been lurking on here a while, working hard to understand the basic networking concepts and eventually pursue the CISCO certs. I bought a lab and have since managed to setup a four router config (2610XM-DTE, 2621-DTE, 2501-DCE, and a linksys E1000 with routing, DHCP, and NAT turned off to make it a wirelss access point) with three switches (2@2950 and a 2924XL).
So far, I have managed to bring in my public IP using DHCP, and setup PAT. The network is fully functional, I can ping every interface, and reach the web on host PCs from any switchport. I am also able to telnet into the FastEthernet interface IPd with my public address.
My Issue : My concern right now is in feature support. I recently read on here that CISCO does not support UPnP, and due to my limited resources, I am using the only public IP I have to allow remote testing/learning on my lab. The issue is that I also have a PS3 and XBox 360 on this network that is requiring UPnP for certain online games and features.
The only solution I can see to this problem is to return my public IP back to the E1000 router, which is running RIP Version 2 (white papers said version 1, but a debup ip rip showed that updates were being ignored due to illegal version), and then poing my other three routers to it for outside access.
The questions I have in this scenario:
1. Will NAT still function if I use the E1000 and set the interfaces connecting to it as ip nat inside? I'm assuming that PAT is already hardcoded onto the router to allow for multiple connections to public IP space.
2. If my IP is 68.X.X.X, I set the E1000 to an IP of 192.168.1.1 and the FastEthernet it connects to is on my 2621 with an IP of 192.168.1.2, would it be possible to telnet into 192.168.1.2? If I were to forward port 23 out of the E1000 to the 192.168.1.2 address. Will my login and password for line vty 0 4 understand the request if the original telnet was to my public IP?
3. If all of that is just non-sense, is there another work-around that allows me to acheive UPnP through my E1000, while retaining telnet ability to my lab so I can try things in different scenarios or while I'm away from home?
Cisco WAN :: How To Connect Two Office For Two 2911
Jun 5, 2012We have two different location for two offices
Office 1 =
Office 2
they are connected by Micro-Wave , Radio , and we have two cisco 2911 routers so we like to connect this two offices
Office 1 Microwav-radio ip address == 155.155.155.1
Local Network ===== 10.10.10.x
Office 2 Microwave-radio ip adddress == 155.155.155.2
Local Network 1 = 192.168.1.0
Local Network 2 = 192.168.2.0
i can configure interfaces , but i have little bit confuse for the Routing and the access list , so how office 1 can access the two local networks office 2
How To Give Endpoints On A SOHO Router Network Public IPs
Mar 7, 2011how I can give endpoints on a SOHO router network Public IPs so I can access an Electronic Whiteboard over the Internet. Do I need to purchase more that one Public IP or is there something I can do with subnet masking?
View 2 Replies View RelatedBelkin Routers :: Connect 2 N600 Wireless To Extend Range?
Nov 1, 2012I have a 3 story townhouse and want to have one n600 connected to my modem on the 3rd floor and then have the other downstairs connected through wireless to the one upstairs. I have seen lyncsys will do this but will the belkins?
View 1 Replies View RelatedCisco Switching/Routing :: SOHO RIPv2 Redistribution To OSPF On 2900?
Jul 27, 2012I am having a problem reaching a soho linksys e1000 router through a second hop cisco 2900 router.Here is a brief topology of the network: I am using OSPF area 100 for all networks except for
192.168.2.0 on R1 to E1000 which is RIPv2
R1 directly connects to R2 with a point-to-point serial on network 192.168.12.0 /30 with ip 192.168.1.13
R1 directly connects to a a switchport using network 192.168.2.0 /24 with ip 192.168.1.75
R3 directly connects to a switchport using network 192.168.1.128.0 /25 with ip 192.168.1.129
R3 directly connects to a different cisco router using ethernet on network 192.168.1.0 with ip 192.168.1.1
E1000 directly connects to a switchport using network 192.168.2.0 /24 with ip 192.168.2.1
The switch has a vlan ip on 192.168.1.128 /25?I can ping from R1 to E1000?I can ping from R3 to R1 192.168.2.75? I can't ping from R3 to E1000 192.168.2.1?show ip route on R2 indicates that network 192.168.2.0 is reachable via the serial connection on 192.168.1.12?I have redistributed rip to ospf area 100 and OSPF to RIP on R1?I am wondering why R1 can reach E1000 on network 192.168.2.0, and why R3 can reach R1s 192.168.2.0 newtork, but R3 can't reach the E1000.There is an R2 router than can reach R1 and also cannot reach E1000, but I assume it's for the same reasons R3 can't, so I've omitted the remainder of that topology for this question.
Cisco VPN :: ASA5505-SW-UL Any Connect Setup And Able To VPN Into Office
May 9, 2013I have a Any Connect setup and able to VPN into my office.i bought a ASA5505-SW-UL that is unlimited user (UL) software license but now the vendor tells me that: From the ASA you can saw the unlimited license is for inside hosts, instead VPN client's, by default, ASA 5505 included only 2 VPN client's and can supported up to 25 VPN client's, your license look only default 2 VPN client's. If need more VPN client's connect, you have to purchase the additional VPN client's license. I am just wondering his statement TRUE/FALSE, because i thought ASA5505-SW-UL means unlimited license
View 4 Replies View RelatedHow To Connect 3 Laptops To 1 Printer In Office
Apr 8, 2011I was just wondering how to connect 3 laptops to 1 printer in my office?We don’t have a server and all laptop contacted to internet wireless through a router next door. (I don’t have access to that router)I was thinking to get a hub and then connect it to the Ethernet cable back of the printer and then connect it to each laptop?
View 3 Replies View RelatedSmall Office Network - Connect Three PCs Together?
Apr 4, 2013I would like to connect my three pcs together so that they can all make use of the printers, scanners, internet etc in my office space. i also need to be able to access this lot from a remote laptop so that i can continue to work from home. i would like to store all my data in one place that was easily accessible from every PC and my laptop.
View 2 Replies View RelatedFind Out External IP To Connect To My Office?
Apr 18, 2012How do I find out external IP I need to connect to my office!
View 2 Replies View RelatedCisco Switching/Routing :: 3750 - How To Block Unauthorized DHCP SOHO Router
Jan 20, 2012If it's possible, how do you protect/block a unauthorized DHCP SOHO router with NAT form a Cisco 3750?
View 16 Replies View RelatedDell Xps L321x / Can't Connect To Wifi At Office
Jan 9, 2013I have a Dell XPS L321X, ultrabook, which can connect to wifi except a specific office wifi, say TPR. The interesting thing is I can connect to this TPR wifi when nobody is in office, I thought it might be an IP conflict. So I tried to assign a static IP address, but it doesn't work. I have updated the wifi adapters two days ago.I tried few things like IPCONFIG /RELEASE, IPCONFIG /RENEW, but nothing works. The security type of all the wifi in my office are WPA-PSK and they all have good strength. We use sharepoint services for our daily office work, which can be accessed only using a TPR wifi. It's frustrating that I cannot connect to it.
View 14 Replies View RelatedOffice Jet Printer - Unable To Connect It With Internet?
Jan 2, 2012i am having problem adding the officejet printer that was uninstalled because it was not working. after three days of online support from HP and Lynksys, I am about to buy a new printer. Can't add printer wirelessly or wired.
View 1 Replies View RelatedCisco VPN :: 1841 / 881 - Setup A VPN To Connect To HO From Branch Office Through Router?
Jan 26, 2013I have got two 1841 and one 881 cisco router. I can keep any one of this router at HO and remaining at branch office. I have got a static internet IP at HO but dynamic IP at branch office. I want to setup a VPN to connect to HO from branch office through router. The branch connects through a private IP for internet purpose. Which VPN is the most secure and best for this purpose.
View 1 Replies View RelatedPC Only Connects To Wireless At Home But Won't Connect Office Network
Apr 29, 2011I am not sure what the problem is but my laptop wont connect to the wireless in my office, it connects fine to my wireless network at home..
View 13 Replies View RelatedWireless :: Connect Laptop With Wifi In Home And Office?
Feb 8, 2013I have my laptop. I need to use my broadband connection at my home. Also I need to use my laptop with wifi at my office. We do not have any dhcp servr at office. What I am doing now is changing ip configuration at office every day manually.
View 2 Replies View RelatedWRT54G2 - Connect Two Sets Of Computers Within Home Office?
Jan 26, 2012I have a group of five computers at one end of my home office and another group of four computers across the same room. All are hardwired on the same internal network. These cannot be consolidate or moved into one corner or closet. There just is not the space and it's just physically not possible.There is one Internet router as provided by the local cable company. I have this connected to a LinkSys WRT54G2 broadband router. A Netgear DS108 8-port hub is connected the LinkSys. All computers either connect to the Netgear hub or to the LinkSys router. As of now, the WiFi from the LinkSys router is only ever used by my cell phone while at home.
This set up is annoying. At first I did not mind, but there are cables on the floor that I have to step over. These CAT5 cables connect one set of computers to the LinkSys or Netgear. I have to watch where visitors are walking or stepping to assure they don't trip.How can I keep these computers on the same network and eliminate just those cables crossing the floor of my home office?Should I use WiFi NICs? Would this overwhelm the WiFi on the LinkSys?
