Cisco Wireless :: 1552E - Outdoor Enterprise Mesh 802.11n Deployment

Jul 20, 2011

Is Cisco WCS mandatory when deploying an outdoor enterprise mesh solution?If I am goin to use the 1552E purely as an outdoor access point ,do I really need the Cisco WCS?

View 2 Replies


ADVERTISEMENT

Cisco Wireless :: 1552E Outdoor Mesh AP With 2504 Or 5508 Controller?

Sep 7, 2012

which controller I should use with 11 1552E AP ? I know 5508 will work with the AP's, but would the 2504 also work? If 2504 will work, I will go for the 2504 since its a cheaper solution.

View 2 Replies View Related

Cisco Wireless :: New Outdoor 1552E Cannot Join WLC 5508

May 13, 2012

I just have a brand new Aironet 1552E , just took it out of the box and connect to the same subnet with a WLC 5508 v7.2 fully config and working However, it could not join the WLC 5508.

View 4 Replies View Related

Cisco Wireless :: 5508 Or 2504 - Which Controller To Use For 1552E Outdoor AP

Sep 8, 2012

which controller I should use with 11 1552E AP ? I know 5508 will work with the AP's, but would the 2504 also work? If 2504 will work, I will go for the 2504 since its a cheaper solution.

View 5 Replies View Related

MSM410 Wireless Enterprise Deployment / HP Or Ubiquiti

Jan 13, 2013

I currently work for an enterprise that want to deploy wireless network (6AP for now) and I'm the one who will manage and install it.I had initially planed to deploy Ubiquiti network because I've heard lot of good thing about them. But they did not wait me and bought (crappy?) HP access point (MSM410)

What do you think about HP wireless network ? They did not yet buy the access point controller and I'm not sure they want to buy one.I can't find any review on the HP solutions it looks like no one is using it.

Do you recommend me to continue with the HP solution and buy a HP controller or go with Ubiquiti and rebuy the access points (no so much expensive in comparison with the price of the HP controller alone)

View 19 Replies View Related

Cisco Wireless :: Mesh Network With 1552E And 1552I?

Aug 8, 2012

Done a wifi mesh using 1552E and  1552i mix of AP's ? With the 1552E as RAP and 1552I's as MAP's ? Is it a recommended model of deployment  and will it work well ? the 1552i having radiation pattern more towards the ground when mounted on top , will the mesh backhaul to the 1552E be strong enough ?
 
Will this work if i put the 1552e at a lower level than the 1552i so that the mesh is formed properly ?

View 2 Replies View Related

Cisco Wireless :: 1552E - Channel Setting On Mesh AP

Jun 6, 2012

In our mesh network. there are 8 root AP and 15 mesh AP . we are using 1552E ,i have few questions on it: 
 
1. If the ap's acting as mesh ap are connected with only 2.4 ghz external antenna, will they have problem joining the root access point to form mesh.
2. How should we set the channel assignments. Do we only set them in root ap's.
3. should the channels be set under 802.11a ?
4.should the channel be manually set or should it be left to be chosen dynamically.

View 1 Replies View Related

Cisco Wireless :: Enterprise MESH In Release 7.0 MR1

May 11, 2011

I'm looking for documentation on the Enterprise mesh solution based on 7.0 MR1...In this release e.g 802.11n APs are supported and clean air for the client radio etc...The current Cisco Mesh Access Points, Design and Deployment Guide is based on the previous 7.0 release.Apart from the configuration guide I can't find any additional guides.

View 1 Replies View Related

Cisco Wireless :: WLC 5508 - Client Don't Receives IP Through Mesh (1552E)

Jan 31, 2013

recently I installed  WLC 5508 en the central office and installed a network mesh in a remote office; central and remote office is connected with serial link as WAN, and I have dhcp server in the remote office for give ip address to all users and devices in the remote office. Additional I have 5 LAP1552 (mesh) and 2 LAP1260 in the remote office, all clients that connect to LAP1260(this don't belong to the mesh) receive ip address from dhcp server, but neither client that try to connect to the mesh (LAP1552) receive ip address from dhcp server. I don't have if I doing some thing bad. The range IP that receive the all ap's belong to the network of devices and the range ip for the users belong to network of users.

View 12 Replies View Related

Cisco Wireless :: Use AP1262 Indoor In Mesh Network With 1552E?

Mar 5, 2013

I have a running Mesh Network with AP 1552E and Controller 5508. The end customer has a new requirement to have a indoor coverage near to AP1552E (mesh AP). But in this building he has not any wired Network (it is far from any switched site). The question is: We can use an AP1262 indoor with Line Of Sigth to AP1552E in the running Mesh Network? I know AP1262 can be used in a  Mesh Netwok  (Root or Mesh) configuring it as BRIDGE [URL]

View 1 Replies View Related

Cisco Wireless :: WLC5508 Required For Outdoor Mesh Configuration?

Jan 3, 2012

I want to start implementing a small outdoor mesh network of 3 APs Aironet 1550 in order to grow afterward with more APs. Is there any way to configure those 3 APs in an outdoor mesh configuration (for example, only one RAP and two MAPs) without a Wireless LAN Controller or I have to have at least, one WLC? My idea is to have a WLC 5508, but at the very beginning I don't know if my budget is gonna allow me to cost the WLC.

View 7 Replies View Related

Cisco Wireless :: Power Rating Of 1552e Mesh AP Before Antennas Are Attached?

Mar 15, 2013

What is the power rating of a 1552e mesh AP before the antennas are attached? I have the dual band 2.4 / 5 GHz antennas. I know their Db rating, but I have not been able to find what the AP is.

View 1 Replies View Related

Cisco Wireless :: Configuring 1552E MAPs In MESH Topology With Controller?

Mar 21, 2013

I have to build a MESH topology with 1 Root Access Point and 4 Mesh Access Points which are 1552E.I have a wireless controller which is a WiSM 2 card into a 6500 chassis.I want to know if there is a pre-configuration to do on the AP before installing it, or if they are automaticaly discovered by controller (even for MESH AP which are NOT wired to LAN) ?

View 15 Replies View Related

Cisco Wireless :: 1552E - Sensor Connected To Mesh Access Point

Jan 21, 2013

A 1552E has a temperature gauge sensor connected to its power over Ethernet port. the port status shows line protocol as down.The cable from 1552 to the sensor has been changed twice. We can see the 1552E gig1 interface is at 1000full duplex. Is there any chance the speed is causing the problem here. it seems the 1552E doesn't allow to set different speed & remains on 1000.

View 2 Replies View Related

Cisco Wireless :: Mesh Deployment With WLC 2504 And 1500 AP

Jun 6, 2012

I am implementating wlc 2504 and 1520 ap,i installated wlc and ap are got registered. In WLC i changed parameter as RAP and MAP.
  
As per doucment i have to enable Zero touch configuration in bridging. But bridging option is not their in wlc, wlc is running on 7.0.220

View 2 Replies View Related

Cisco Wireless :: To Deploy Indoor Mesh Deployment In Area 1500 Series

Aug 10, 2011

We are looking to deploy an indoor mesh deployment in an area where radar might be an issue.know that when using 1500 series APs you cannot choose UNII-1 channels even if they are deployed indoors.My question is if you can use a UNII-1 backhaul with indoor APs (3600 series for example) in an indoor mesh deployment.

View 8 Replies View Related

Cisco 1500 Series AP - Outdoor Wi-Fi Mesh Topology Versus Repeaters

Apr 3, 2012

Here's the current configuration in our organization (which I believe is incorrect):We have a number of Cisco 1500 series AP's (22 in total), that are mounted outdoors to provide seamless WiFi coverage over a large area. Each AP however has its own physical ethernet connection back to the WLC (All the AP's are marked as Root AP's). They are all broadcasting the same SSID. We have tried to stagger the channel selection but because there are only three non-overlapping channels to choose from, and in some areas the density of AP's is quite high, there is multiple places of channel interference. With this configuration we experience 100-150 disconnects from clients every day. (Our clients are mobile so they move throughout the coverage area constantly).

My idea is to switch the AP's to the same channel thereby forming a wireless mesh, use the built in functionality of the 1500 series to use 802.11a as the backhaul, designate one or two AP's as root AP's and wire them back to the WLC. Thereby forming a WiFi mesh, which if I'm not mistaken is the point of the 1500 series in the first place!

I am however completely new at WiFi networks and wondering if I am simply mistaken in what I believe my proposed changes will enable, or if there is a better way to tackle the WiFi topology.

View 1 Replies View Related

Cisco Wireless :: 1550 AP - Wireless Mesh Deployment

Aug 9, 2011

Can I Deployed a wireless mesh w/o WCS? is it necessary? I  have 5 1550 AP, WLC (12 AP license) and 1 Catalyst Switch. With all these can I Install a wireless mesh.

View 2 Replies View Related

Cisco Wireless :: 1552E Rap Locks Up

Aug 21, 2012

1552E Rap will "lock" up, and not allow MAPs to connect through it to join. the WLC.  Rebooting the Rap will resolve the issue, but the problem comes back and some random point in the future.  Prior to rebooting the Rap to fix the issue, the Rap shows as joined to the WLC, but I have noticed that the neighbor details look stale, meaning my MAPs don't show up as neighbors, but other MAPs in the area are in the neighbor list, listed by MAC address.  At this time, I can not confirm whether or not the neighbor detials are changing (updating), but I can confirm that my MAPs never show up as neighbors.As soon as the RAP is rebooted, MAPs join the controller again.

View 3 Replies View Related

Cisco Wireless :: 1552E Not Able To Connect To WLC

Apr 10, 2012

We purchased cisco AIR-CAP1552E-A-K9 and it has IOS c1520-k9w8-mx.124-23c.JA2. WLC with the lastest firmware 7.0.116.0 is not able to connect to the Cisco 1552E. 1552E log show that it can see the WLC but unable to connect. We have devices for both U.S and Australia domain. Why are the 1552E not able to connect to the WLC?

View 19 Replies View Related

Cisco Wireless :: Switches Off Of 1552e APs?

Mar 11, 2012

I am designing a wireless mesh network for a client using several 1552 access points that will be bridged together. Only the RAP has a wired connection to their existing network. The client has informed me they want to hang switches off of the MAPs to connect existing wired devices. I found this in the install manual, "To forward bridge traffic, add a switch between the power injector and controller" but I will not be using power injectors (just AC power). Will adding a switch off of the AP's impact their wireless bridging abilities?

View 15 Replies View Related

Cisco Wireless :: 1524PS And 1552E/EU - Having WEP Encryption?

Apr 25, 2013

I can't find information about two features in 1524PS and 1552E/EU:
 
1. Does it have WEP encryption ?

2. Does it have SNMPv3 protocol for monitoring and remote managing ?
 
I guess, that software is similar in both, so answer will be the same in 1524PS and 1552E/EU.
 
How to confirm this features in 1524PS ?

View 0 Replies View Related

Cisco Wireless :: Use Patch Antennas With AP 1552E?

Sep 18, 2012

I need to use 14Dbi patch antennas (like AIR-ANT5114P-N I use to have on AP1522) on AP 1552E. Is it possible?

View 2 Replies View Related

Cisco Wireless :: 1552e Not Download Image

Apr 1, 2013

% CDP is not supported on this interface, or for this encapsulation*Apr  2 18:35:20: %CAPWAP-3-ERRORLOG: capwap ifs:  read error or timeout

[code]....

View 12 Replies View Related

Cisco Wireless :: 1522 Need To Add Two New Outdoor AP

Mar 9, 2012

Have a site that has a 1522 installed. I need to add two new outdoor AP's.  Would the 1550 work along with the 1522 or would I have to replace it?

View 2 Replies View Related

Cisco Wireless :: Loading Autonomous Image On 1552E

Jan 28, 2013

I've looked through the documentation for loading the autonomous image on a 1552E WAP that has the lightweight image on it.  All the documentation I can find mentions using the "archive" command at the command line.  It doesn't appear to like the archive command.
 
I've seen in the documentation that it also mentions the software is loadable through the controller, but I can't figure out how to do that.
 
I currently have the 1552E connected to my 5508 controllers running 7.3 software. how to load this autonomous image on to the 1552E? I'm planning on using it to do site surveys with the 1552E.

View 7 Replies View Related

Cisco Wireless :: Couldn't Ping AP 1552E From Computer

Nov 7, 2012

I connected to AP 1552E and my computer via PoE Gigabit Ethernet Port. Port is up and two of them are the same subnets.Even if my computer and ap arp table seen each other but i couldnot ping the each of them. [code]

View 4 Replies View Related

Cisco Wireless :: Power 1552e With Proper Poe Injector?

Oct 13, 2012

Can I power the 1552e with the proper poe injector if I am not using the ethernet port for backhaul? I want to get power thru poe but use a fiber for backhaul.

View 4 Replies View Related

Cisco Wireless :: Could Not Install Red Hat Enterprise 5.0 On MSE 3355

Jun 26, 2012

I want to reinstall the MSE image that was sent to me by Cisco TAC Team, however when I try to reinstall the MSE Application, however when I try to install it, the CD boots and show me the Red Hat enterprise image, then sends me black screen with the message "Kernel alive, Kernel direct mapping tables up to 480000000 @ 8000-1b000" and it stay there.

View 2 Replies View Related

Cisco Wireless :: Is It Possible To Lower Power Draw On Aironet 1552e AP

Mar 20, 2013

Is it possible to lower the power draw on the Aironet 1552e AP (AIR-CAP1552E-N-K9) so it will run on a standard PoE device (IEEE 802.3af). The spec sheet for the AP says you need to either use the Cisco PoE injector (AIR-PWRINJ1500-2=).Is there possibly a firmware upgrade/downgrade or some sort of command I can use?The APs being used are running LWAPP and require a controller.

View 2 Replies View Related

Cisco Wireless :: 1552E Way To Copy Local Mac Filtering From Primary WLC

Oct 31, 2012

I have a number of  1552e APs connected to a 5508 WLC.  We are using local MAC filtering to enable  the 1552's to connect to the WLC.
 
I have a several more 5508's in different locations, and can be used for back-up in the event the primary WLC fails.I have the primary WLC, a secondary WLC and a tertiary WLC loaded into each the 1552's HA tab.
 
My question concerns the secondary and tertiary WLCs... do I have to load all the MAC addresses in each of those as well in order for the 1552's to connect? If yes, is there an easy way to copy the local mac filtering from the primary WLC and load it into the other WLCs ?

View 5 Replies View Related

Cisco Wireless :: ANT25137NP-R Wi-Fi Coverage For Outdoor Area

Jul 30, 2012

I've been tasked with providing wireless coverage for an outdoor courtyard.  The wireless that bleeds out into the courtyard is minimal for both 2.4 and 5 Ghz bands.  I'm thinking a 3502p mounted just inside the wall hooked to a ANT25137NP-R patch antenna mount on an exterior wall. The red line on the wall will represent the antenna mounted on the wall.  This will be providing coverage for phones on 5Ghz and general devices on 2.4.

View 5 Replies View Related

Cisco Wireless :: 1552 Outdoor AP Disappears From WLC5508

Dec 30, 2012

My problem ist that i have 4 air-cap-1552e APs witch are powerde trugh Power Injectors. They worked fine for a few days but then the controller (7.2.111.3) lose connection to them. Right now i have only one Joined AP. The other 3 are status not joined. I can Ping all 4 Aps and wifi clients are connected through them.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved