Cisco Wireless :: Use Patch Antennas With AP 1552E?
Sep 18, 2012I need to use 14Dbi patch antennas (like AIR-ANT5114P-N I use to have on AP1522) on AP 1552E. Is it possible?
View 2 Replies
ADVERTISEMENT
Cisco Wireless :: Power Rating Of 1552e Mesh AP Before Antennas Are Attached?
Mar 15, 2013What is the power rating of a 1552e mesh AP before the antennas are attached? I have the dual band 2.4 / 5 GHz antennas. I know their Db rating, but I have not been able to find what the AP is.
View 1 Replies View RelatedCisco Wireless :: 1552E Rap Locks Up
Aug 21, 20121552E Rap will "lock" up, and not allow MAPs to connect through it to join. the WLC. Rebooting the Rap will resolve the issue, but the problem comes back and some random point in the future. Prior to rebooting the Rap to fix the issue, the Rap shows as joined to the WLC, but I have noticed that the neighbor details look stale, meaning my MAPs don't show up as neighbors, but other MAPs in the area are in the neighbor list, listed by MAC address. At this time, I can not confirm whether or not the neighbor detials are changing (updating), but I can confirm that my MAPs never show up as neighbors.As soon as the RAP is rebooted, MAPs join the controller again.
View 3 Replies View RelatedCisco Wireless :: 1552E Not Able To Connect To WLC
Apr 10, 2012We purchased cisco AIR-CAP1552E-A-K9 and it has IOS c1520-k9w8-mx.124-23c.JA2. WLC with the lastest firmware 7.0.116.0 is not able to connect to the Cisco 1552E. 1552E log show that it can see the WLC but unable to connect. We have devices for both U.S and Australia domain. Why are the 1552E not able to connect to the WLC?
View 19 Replies View RelatedCisco Wireless :: Switches Off Of 1552e APs?
Mar 11, 2012I am designing a wireless mesh network for a client using several 1552 access points that will be bridged together. Only the RAP has a wired connection to their existing network. The client has informed me they want to hang switches off of the MAPs to connect existing wired devices. I found this in the install manual, "To forward bridge traffic, add a switch between the power injector and controller" but I will not be using power injectors (just AC power). Will adding a switch off of the AP's impact their wireless bridging abilities?
View 15 Replies View RelatedCisco Wireless :: AIR1242AG - Number Of Antennas
Apr 1, 2012My customer wants to buy AIR1242AG with 2.4 GHZ antennas which are not ceiling mounted. How many 2.4 GHz antennas I can have on the AIR1242AG?
Can I have a recommendation which antenna I should use which is not ceiling mounted?
External Antennas For Wireless Adapter?
Sep 22, 2011My desktop PC which has an Asus PCE-N13 Wireless Adapter with two stock SMA antennas receives a very poor signal due to the significant distance between my desktop and the router.In order to improve my signal strength, I thought about buying better 3rd party antennas and specifically external ones which I could place closer to the router that connect to the SMA connections on my wireless adapter via a wire. There's many of these antennas for sale I see, but I'm unsure which is best suited for my situation.
View 3 Replies View RelatedCisco Wireless :: 1524PS And 1552E/EU - Having WEP Encryption?
Apr 25, 2013I can't find information about two features in 1524PS and 1552E/EU:
1. Does it have WEP encryption ?
2. Does it have SNMPv3 protocol for monitoring and remote managing ?
I guess, that software is similar in both, so answer will be the same in 1524PS and 1552E/EU.
How to confirm this features in 1524PS ?
Cisco Wireless :: 1552e Not Download Image
Apr 1, 2013% CDP is not supported on this interface, or for this encapsulation*Apr 2 18:35:20: %CAPWAP-3-ERRORLOG: capwap ifs: read error or timeout
[code]....
Cisco Wireless :: Possible To Use External Antennas On AP541N Set In WDS Mode
Aug 20, 2010Is it possible to use external antennas on AP541N set in WDS mode? I would only need to use 802.11g mode 54mbps.I believe that the antennas shipped with the access points are removable RP-SMA.
View 3 Replies View RelatedCisco Wireless :: AP1552 Directional Antennas Outdoor
Jun 30, 2012I am expanding coverage in a big outdoor area.Most of the area is covered with AP1552 with AIR-ANT2506 5,2 db antennas.At the border of the area i have some masts where i can place ap's.Would it make sense to use directional antenna's there? I have a big open area where it is not possible to place ap's.The only placement is a mast in the middle of the area.I have a AP1552 with 5,2 db antennas there.Can i get better coverage if i place 3 or 4 ap's with directional antennas ?Or should i try with a 12dBi AIR-ANT24120 ?
View 2 Replies View RelatedCisco Wireless :: 3500 How Many 5.8 GHz Antennas To Pick For Each Radio
Dec 3, 2012I am building a BOM for a customer and I need to present cheaper options than 3500 or 3600 APs. I thought of these two models but I don't know what models of antennas to pick.1602 is a 3X3 MIMO with 3 antenna connectors. How many 2.4 GHz and how many 5.8 GHz antennas should I pick for each radio?2602 is a 3X4 MIMO with 4 antenna connectors. In this case I suppose there are 2 connectors per radio.
View 9 Replies View RelatedCisco Wireless :: Antennas Doesn't Work On AP 3600
Mar 6, 2013I´m trying to test anntenas in a AIR-CAP3062E-A-K9 the problem is that when I´m below the AP the speed is weak, the AP es with a WLC, so I was wondering if do you know a command or a form to test the anntenas or the Radio.
View 7 Replies View RelatedCisco Wireless :: 1242AG - How To Find Out Model Of Antennas
Feb 25, 2013I have an existing 1242AG AP in a remote location, I have full access to it. I have a new 1242AG that was ordered but the client forgot to order antennas for it. Is there a way I can find out the exact model of antennas that are connected to the in place AP at the remote location??
View 2 Replies View RelatedCisco Wireless :: Can C1200 Antennas Work On 1262
Mar 21, 20121. Can the C1200 antennas work on the 1262 ?
2. Can the 2.4Ghz antenna work on the 5Ghz ports on the 1262 ?
3. The 1262 has 6 antenna ports (3 2.4ghz and 3 5ghz), can the (3) 2.4 Ghz antenna be used only as i only have antennas for the C1200 Access point which are 2.4 Ghz.
Cisco Wireless :: 1262 Indoor And Outdoor Antennas On Same AP?
Jun 19, 2012I have a metal shop that needs wireless indoors and outdoors.
Will it work if I mount the 1262 inside with 4 indoor antennas mounted inside the building and 2 outdoor antennas mounted outside?
Cisco Wireless :: Mesh Network With 1552E And 1552I?
Aug 8, 2012Done a wifi mesh using 1552E and 1552i mix of AP's ? With the 1552E as RAP and 1552I's as MAP's ? Is it a recommended model of deployment and will it work well ? the 1552i having radiation pattern more towards the ground when mounted on top , will the mesh backhaul to the 1552E be strong enough ?
Will this work if i put the 1552e at a lower level than the 1552i so that the mesh is formed properly ?
Cisco Wireless :: Loading Autonomous Image On 1552E
Jan 28, 2013I've looked through the documentation for loading the autonomous image on a 1552E WAP that has the lightweight image on it. All the documentation I can find mentions using the "archive" command at the command line. It doesn't appear to like the archive command.
I've seen in the documentation that it also mentions the software is loadable through the controller, but I can't figure out how to do that.
I currently have the 1552E connected to my 5508 controllers running 7.3 software. how to load this autonomous image on to the 1552E? I'm planning on using it to do site surveys with the 1552E.
Cisco Wireless :: New Outdoor 1552E Cannot Join WLC 5508
May 13, 2012I just have a brand new Aironet 1552E , just took it out of the box and connect to the same subnet with a WLC 5508 v7.2 fully config and working However, it could not join the WLC 5508.
View 4 Replies View RelatedCisco Wireless :: Couldn't Ping AP 1552E From Computer
Nov 7, 2012I connected to AP 1552E and my computer via PoE Gigabit Ethernet Port. Port is up and two of them are the same subnets.Even if my computer and ap arp table seen each other but i couldnot ping the each of them. [code]
View 4 Replies View RelatedCisco Wireless :: Power 1552e With Proper Poe Injector?
Oct 13, 2012Can I power the 1552e with the proper poe injector if I am not using the ethernet port for backhaul? I want to get power thru poe but use a fiber for backhaul.
View 4 Replies View RelatedCisco Wireless :: 1552E - Channel Setting On Mesh AP
Jun 6, 2012In our mesh network. there are 8 root AP and 15 mesh AP . we are using 1552E ,i have few questions on it:
1. If the ap's acting as mesh ap are connected with only 2.4 ghz external antenna, will they have problem joining the root access point to form mesh.
2. How should we set the channel assignments. Do we only set them in root ap's.
3. should the channels be set under 802.11a ?
4.should the channel be manually set or should it be left to be chosen dynamically.
Cisco Wireless :: WAP4410N Responding By Adding External Antennas?
Sep 21, 2010I have not done the firmware for the units yet but have had only 1 outage thus far (but I think it was a power issue over the weekend).What I have done, 3 weeks ago, is put external antenna's on the 2 units which are 15 feet apart at 15dBi.The output is 40hz and I changed the latency time settings on the main unit, leaving the secondary at factory.This seems to be working for me so far. Usually goes down over the weekend and have to reset Mondays,but not this week. I am afraid of running the firmware because then it may become unstable again.
View 6 Replies View RelatedCisco Wireless :: CAP-1602E - External Antennas In Separate Rooms
Feb 14, 2013I have a question about external antennas on an access point. I have to plan a wireles solution, that also includes coverage in the industrial freezers. The freezers are one part of the sotck rooms, so the general coverage will be done with 1602I access points.
Since there are quite a lot of freezers in one location, installing separate AP in every freezer will be very expensive. I wondered if there is a possibility to put one 1602 access point with external antennas outside the freezer and then extend the antennas with 2m cables inside different freezers (1602E has three external antennas, so one antenna to each freezer).
Would this installation even work?
The freezers are quite small rooms maybe 2-3m2 sow the coverage is not a problem. But does this installation support multiple clients per AP in different freezers doing stocktaking with handheld terminals?
Cisco Wireless :: AIR-LAP1242AG-E-K9 / 5GHz Antennas On 2.4GHz Radio?
Jul 16, 2012We ordered 2 Cisco AIR-LAP1242AG-E-K9 Wireless Access Points with 4 AIR-ANT5135D-R antennas.We accidentally ordered the 5GHz antennas instead of the 2.4GHz antennas.Would it be possible to use the 5GHz antennas as 2.4GHz antennas?If so, are there any down sides to it?
View 15 Replies View RelatedCisco Wireless :: Installing Multiple Antennas (2450S) On AP1261?
Nov 11, 2012I would like to install three antennas (2450S) on some AP1261 that i wold spread out 10 feet apart. I am not able to get the antenna on the C connector to transmit. I am not using 802.11N. This is for a warehouse where all the WiFi devices are 802.11G. My question is: can you get all three connectors on the AP to transmit.
View 8 Replies View RelatedCisco Wireless :: 1552E - Outdoor Enterprise Mesh 802.11n Deployment
Jul 20, 2011Is Cisco WCS mandatory when deploying an outdoor enterprise mesh solution?If I am goin to use the 1552E purely as an outdoor access point ,do I really need the Cisco WCS?
View 2 Replies View RelatedCisco Wireless :: Is It Possible To Lower Power Draw On Aironet 1552e AP
Mar 20, 2013Is it possible to lower the power draw on the Aironet 1552e AP (AIR-CAP1552E-N-K9) so it will run on a standard PoE device (IEEE 802.3af). The spec sheet for the AP says you need to either use the Cisco PoE injector (AIR-PWRINJ1500-2=).Is there possibly a firmware upgrade/downgrade or some sort of command I can use?The APs being used are running LWAPP and require a controller.
View 2 Replies View RelatedCisco Wireless :: WLC 5508 - Client Don't Receives IP Through Mesh (1552E)
Jan 31, 2013recently I installed WLC 5508 en the central office and installed a network mesh in a remote office; central and remote office is connected with serial link as WAN, and I have dhcp server in the remote office for give ip address to all users and devices in the remote office. Additional I have 5 LAP1552 (mesh) and 2 LAP1260 in the remote office, all clients that connect to LAP1260(this don't belong to the mesh) receive ip address from dhcp server, but neither client that try to connect to the mesh (LAP1552) receive ip address from dhcp server. I don't have if I doing some thing bad. The range IP that receive the all ap's belong to the network of devices and the range ip for the users belong to network of users.
View 12 Replies View RelatedCisco Wireless :: 5508 Or 2504 - Which Controller To Use For 1552E Outdoor AP
Sep 8, 2012which controller I should use with 11 1552E AP ? I know 5508 will work with the AP's, but would the 2504 also work? If 2504 will work, I will go for the 2504 since its a cheaper solution.
View 5 Replies View RelatedCisco Wireless :: 1552E Way To Copy Local Mac Filtering From Primary WLC
Oct 31, 2012I have a number of 1552e APs connected to a 5508 WLC. We are using local MAC filtering to enable the 1552's to connect to the WLC.
I have a several more 5508's in different locations, and can be used for back-up in the event the primary WLC fails.I have the primary WLC, a secondary WLC and a tertiary WLC loaded into each the 1552's HA tab.
My question concerns the secondary and tertiary WLCs... do I have to load all the MAC addresses in each of those as well in order for the 1552's to connect? If yes, is there an easy way to copy the local mac filtering from the primary WLC and load it into the other WLCs ?
Cisco Wireless :: Use AP1262 Indoor In Mesh Network With 1552E?
Mar 5, 2013I have a running Mesh Network with AP 1552E and Controller 5508. The end customer has a new requirement to have a indoor coverage near to AP1552E (mesh AP). But in this building he has not any wired Network (it is far from any switched site). The question is: We can use an AP1262 indoor with Line Of Sigth to AP1552E in the running Mesh Network? I know AP1262 can be used in a Mesh Netwok (Root or Mesh) configuring it as BRIDGE [URL]
View 1 Replies View RelatedCisco Wireless :: AIR-LAP1242G-A-K9 / Using 5.0ghz Antennas With 2.4ghz Access Point?
May 25, 2012I'm working in a campus environment that has an existing wireless network using a Cisco AIR-WLC2112-K9 controller.There are 8 AIR-LAP1242G-A-K9 access points connected to the controller. Each access point has a 5.0GHZ 4.5dbi Cisco omnidirectional antenna, although the AP only supports 2.4GHZ.
Q1. Why a 5.0ghz antenna might had been used with a 2.4ghz AP, and if we can expect increased performance if we replace the antennas with 2.4ghz ones?
Q2. On the controller, the antenna gain is set to 0 for each AP. Is there also a benefit to leaving that 0 as opposed to 9 for 4.5dbi?