How To Link Two PCs To One Shared IP
Jan 6, 2012
I've been working on a project which basically is two motherboards running as a single PC. I've managed to remove all of the bugs etc I've found along the way, as well as blowing up a fair few PSU's and am now at the point of having a fully working system. What i now want to achieve is have them both online and able to access remotely via a VNC application. I can already do this for the top board which has a seimens 3G router plugged into it. I can then use the top board to VNC into the bottom board as they are connected on a LAN (just a standard ethernet cable from one port to the other, no hub/switch etc), however this way seems a bit OTT. What i was wondering is if it is possible to link the bottom motherboard to the top one and have them each running off of a different port on a shared IP.
View 3 Replies
ADVERTISEMENT
Jan 11, 2013
i have a question about accessing shared folders over the WAN-Port of an DIR-615. For your information: both sides of the network (LAN and WAN) are under my control.
On the WAN-side of the network we have a fileserver with shared files. We can ping the server and reach it and the Websites on this server are also reachable from the LAN-side. But if we try to access to the shared folders the request doesn't reach the server. If we change the router there are no more problems and anything works without problems. The Router has default-settings except the network-settings so it works in our network. Does this router block outgoing traffic on ports 135-139 and/or 445? And when yes is there any way to disable this? I can't find it.
View 4 Replies
View Related
Aug 30, 2011
I have 8 apartments that have a single internet connection coming into the building, I then have a PoE Access Point in each of the 8x apartments.
What I would like to be able to do is to have each apartment within its own vlan, but to be able to use the internet via one of the non-PoE ports (port 9 say) but do not want residents in different flats to be able to see each others devices on the same network.
I have a Cisco SG 300-10MP which has 8x PoE ports and 2x Ethernet ports, one of which my Internet connection is plugged into (using WiMax).
View 2 Replies
View Related
Jun 3, 2011
Trying to connect (ipod touch) to DIR-655 with WPA2 enabled.
* Is there a way to connect without having to enter entire Long WPA2 Pre-Shared Key?
* why iPod has required me to enter security password several times - why would it keep losing the saved password I've entered?
- What is the PIN SETTING for on Device homepage? Is that a shortened key?
-I'd already added multiple times in past, too...
View 1 Replies
View Related
Jan 7, 2013
Region : NewZealand
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I've plugged in a USB flash drive and enabled shared storage on my TL-WR1043ND router. With "Access shared storage with password" unticked, I can access the share using both my Windows 7 Laptop and Motorola Defy+ (with ES File explorer) and successfully play any Music off of the network share using the Android App, ES File explorer.
If I enable "Access shared storage with password" and attempt to log in using any of the user accounts I've set up on the device, I will be able to access the shares using the credentials on my Windows 7 Machine, but not with my Motorola Defy+, instead I will simply receive "Login failure". I'm Picking it has something to do with the network share type?
View 4 Replies
View Related
Nov 16, 2012
wr2543ND / very slow shared storage transfer speeds?
View 4 Replies
View Related
Apr 2, 2013
Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Looking at the manual for this router in regards to bandwidth restrictions.When you set up the Rules under Bandwidth Control does this setting shared by the IP range or does each IP in the range get that amount of bandwidth?
View 1 Replies
View Related
Jan 26, 2013
Region : Singapore
Model : TL-WDR4300
Hardware Version : V1
I need to set up remote access to my HDD connected to my WDR4300, so I can always go online when I am out to retrieve the saved files in the HDD. However I have zero knowledge of network setting of the FTP servers, I can gain access when I am home and connected to the Wireless network, but how to gain access remotely.
View 6 Replies
View Related
Mar 7, 2011
I recently built a server for home use as i have 6 computers in the house and would like to access all of my information on all of them. The idea was just to have a place for storage and not so much application use. i don't want to have to enter a password every time i try to access a folder and i don't want to use Active Directory if i can avoid it. The server itself is running Windows Server 2008 R1 Enterprise Edition 64 bit. (my office had extra copies that they had no use for) I have an iMac, Windows 7 computers and one Linux box.
It does not matter what computer i use or what settings i seem to apply, but I cannot get into the hard drives of the server. I set it up with 2 sets of 2TB drives each set up in RAID 1 for backup. i have done such things before in windows xp and i thought it would be the same.
View 12 Replies
View Related
Jan 6, 2012
I've networked 2 PCs both on xp, one home one pro, through the router/modem. I get an error message saying contact your system admin when I try to read shared folders on the home from the pro version - I am the admin! The other way works fine.
View 5 Replies
View Related
Mar 5, 2011
When I try to connect wireless my mobile showing WPA pre-shared key?
View 1 Replies
View Related
Sep 20, 2011
At our work, we have a shared documents server and also an email server to connect to. For some reason, on one computer only, I cannot connect to either my e-mail or the shared docs. It simply will not accept the credentials (ie my password for my username). It won't accept anyone else credentials either. I have set up fine on another computer, and on my home computer which is on a different network. I can categorically say that it's a computer problem as the usernames/passwords work fine on every other computer, but this one cannot seem to connect. I connect to the servers through a shortcut on the desktop, so i think it's the exchange or something I can't connect to.
View 14 Replies
View Related
Jun 25, 2011
On my home network, I have several shares on my PC. But I dont seem to be able to even view the shares from other machines. If I put the IP address into an explorer window (\192.168.0.4) on another machine I get the message: "\192.168.0.4 is not accessible. You may not have permission to use this network resouces. contact your network administrator etc etc". So I cannot even bring up a directory list. There are no problems for me connecting to network shares on other machines from this machine that is refusing connections. That has all happened since I reinstalled windows. I reformatted the system partition and since then I cannot get the shares working again (they used to work fine). The shares are in a data partition that was not reformatted. This is really winding me up, as there never used to be a problem, and I cant think of anything else to look into, short of delving into the registry, and I wouldnt know where to look.
View 3 Replies
View Related
Aug 22, 2012
Some of my colleagues went away for holidays. When they came back, all 4 of them can't access the shared folders on the server. They could before they went away but now they can't.They can access the internet through the network however and other colleagues including me can access the same shared folders.It is a QNAP server NAS version 2.3.0 Build 0825T,The problem users run Vista and one XP. I have checked that all users are still granted permission to view the shared folders and they are.I can't understand why it would not work for them but work for us...
View 3 Replies
View Related
Nov 21, 2011
I have shared folder s on my Win 7 PC.I can access these folders by typing in the username and password on a Mac.I can't access these folders on my Vista PC because there's no prompt to sign in.How do I change the login account on Vista so that it can access my Windows 7 shared folders?
View 2 Replies
View Related
Jan 16, 2012
In the past both of my Dell Laptops running Windows 7 via a router and belonging to HOMEGROUP, have been able to share files back and forth - with the ability to read/write. All of a sudden, one of the laptops (call it #1) was not able to find the shared files of the other laptop (call it #2.) However it worked the other way (#2 could find #1). I did all kinds of research, checked they both still belonged to the Homegroup, sharing was "on", discover network was "on", permissions were "full", etc.
I couldn't get anything to work - when I saw a suggestion that I sign off the Homegroup on both computers, set up a new Homegroup, and try again. I did this and still didn't have any luck - then decided to reboot both laptops.now I have sharing between both computers. BUT - on Computer #1 - the shared folders are like doubled. I have 4 libraries that are shared - Documents, Music, Video, Pictures, and the listed are all the 6 folders that I made sure were set to sharing - but Documents, Pictures, Music, are duplicates of the "library". I'm afraid to change any settings for fear that I'll lose what I finally gained. So my questions is - how can I clean this up so libraries and individual folders are not both shown?
View 1 Replies
View Related
Oct 16, 2011
I have 3 computers connected to the same home network. i name them XP1, XP2, and win7. obvious from the names, two pcs are running xp and one is running win7. I shared all three in the network. XP1 uses static local ip while XP2 and win7 use dynamic local ip. on xp2 and win7, i could not see XP1's hostname on neither xp2's my network place, nor win7's network. However, i could access xp1 over using its static IP. what xp1's hostname is not shown on the other two's network places? is that because of xp1 is using local static ip?
View 6 Replies
View Related
Jan 24, 2013
I know it is possible, but how do I set up a hard drive to share on a LAN? Current setup is a MBP and iMac sharing a linksys e2500. I would be shooting for at least 1TB for shared usage but that can be worked out later.
View 1 Replies
View Related
Feb 1, 2011
Trying to hook up to my blu ray player for a internet connection, but the blu ray is telling me to check the pc for a shared users so it can connect!
View 1 Replies
View Related
Sep 19, 2011
Shared printer not printing. Have two PCs, one with Vista OS with the printer connected and the other XP, both connected via network sharing. I cannot print from the XP PC. It says I do not have permission even though I have shared the printer.
View 4 Replies
View Related
Jan 21, 2011
i cannot open shared folders in LAN in win 7 its in work group and shared folders do show but on clicking on it it doesn't open says contact network admin i changed the group policy LAN management also checked the advanced sharing properties but i still have the prob not just in one comp but all of my 8 comp
View 1 Replies
View Related
Dec 27, 2012
I'm having a Strange problem. When i try to Explorer files in a network location by typing \<Computer Name> it does not work, Network path not Found error appears. But i can browse files using IP Address.
1. This Happen only at this particular machine only. I can Explorer files using the Computer name from other machines.
2. nslookup shows the correct IP.
3. I can connect to the file server using Remote Desktop by typing the Computer Name.
View 1 Replies
View Related
Jan 11, 2011
i have an imac running vmware in an office that needs to connect to our server using 2003, but i cant make it see the shared drive, or seemingly connect at all. how do i go about this?
View 3 Replies
View Related
Apr 7, 2011
I am having problems setting up a VPN between a Win7 PC and a Server 2008 machine.I am using 'Routing and Remote Access'(with NAT)on the server and all seems to be set up correctly. The Win7 PC connects fine and authenticates but I am not able to see shared drives on the server.It says it is connected with PPTP, I would prefer SSTP. How do I enforce SSTP as the default connection type? I tried this from the VPN client and it wont connect at all.
View 2 Replies
View Related
Sep 25, 2012
I have domain controller windows server 2003 and 30 domain members, and everything was working fineYesterday our xp client complain that they cannot access shared folders and files in our domain controller server.After some time i found that i can access the shared folder by name (\nameserver) but i cannot access them by IP (\XX.XX.XX.XX)[CODE]
View 5 Replies
View Related
Feb 23, 2011
I just set up a VPN connection from my laptop (Win 7) to my office network using Netgear Prosafe VPN client software to my Netgear Prosafe VPN router. I can connect successfully to the router and can successfully ping any of the devices on my work network. Currently, there are shared drives on the work network that I'd like to access from the laptop. All file sharing options are set so that other local machines can access through the network (the drive I'm trying to access runs off of an XP machine). Any attempts at mapping or using \ipaddressfile come back with a "windows cannot access" message.
View 8 Replies
View Related
Jan 17, 2012
I have both a laptop and a brand new Mac. I have a 1tb external hard drive on my network that I use for storing my music. Why can I access this hard drive from my Mac? Is there a way to formatt the external hard drive so I can share the music files between my laptop and Mac?
View 1 Replies
View Related
Apr 5, 2011
Today when I tried to access one network folder, I could not access it. I was getting the message "computer name\folder name is not accessible, you might not have permission to use this network resource".Then I went to the host computer and changed the permission to "everyone" but still I'm getting the same message.
View 1 Replies
View Related
Jan 19, 2011
I have a router-based home network in which the desktop running XP media center is connected by cable to the router. There are 2 wireless laptops, one running XP home and the other Windows 7.The laptops can talk to each other, and the desktop can talk to the laptops.But I cannot access the desktop from the laptops. I can see the (shared) folders, but when I click on one I get the message: "You might not have permission to use this network resource..Not enough server storage is available to process this command." One solution suggested in several places is to change the IRPStackSize to 15. However, if I start the desktop in safe mode with networking, I can access the files.I can also access the machine using remote desktop.One extra frustration is that this is a problem that has happened relatively recently. It used to work OK.
View 8 Replies
View Related
Sep 10, 2011
I am trying to share some files from my windows desktop PC, other windows devices on the network can access those files, but a laptop that runs Ubuntu and a WD TV Live, which runs its own OS cannot access the shared files. I had this problem a few weeks ago but it somehow fixed it self but the problem is back again.
View 1 Replies
View Related
Jun 29, 2012
I was hoping to be able to save a file on one computer and for it to be accessed from a computer in the next room.The first computer is connected to the internet and when emails are received I would like to save them to a folder in my documents and then be able to go onto the other computer, go to my documents and open the file I just saved from computer one.
View 5 Replies
View Related
Sep 18, 2011
I share an unsecured network with my next door neighbor. The Norton Antivirus trial ran out on my new Sony VAIO laptop. Immediately after, it stopped connecting to our network (and any other unsecured network). I've tried turning off Windows Firewall, turning off Windows Defender, did a system restore, uninstalled Norton, used the Norton removal tool, installed and uninstalled another antivirus program (the one that Google Apps recommends... starts with an I), verified the wireless switch is turned on, rebooted my computer, did every update for both Windows and VAIO, booted in safe mode w/ networking, created a new profile... nothing is working!!!!
View 3 Replies
View Related
May 16, 2012
I can see all the shared folders including mine on my workstation but can not access mine.what what is wrong or how do a reset set it so that it can ask for my password in order to access my folder?
View 1 Replies
View Related
