I share an unsecured network with my next door neighbor. The Norton Antivirus trial ran out on my new Sony VAIO laptop. Immediately after, it stopped connecting to our network (and any other unsecured network). I've tried turning off Windows Firewall, turning off Windows Defender, did a system restore, uninstalled Norton, used the Norton removal tool, installed and uninstalled another antivirus program (the one that Google Apps recommends... starts with an I), verified the wireless switch is turned on, rebooted my computer, did every update for both Windows and VAIO, booted in safe mode w/ networking, created a new profile... nothing is working!!!!
My wireless network currently says un-secured. i try to connect and it tells me to enter my pin. i enter the pin on my router and it wont work. the problrm started when i was messing with my internet settings to try to make my wireless internet secured from other people. i dont know what i did but now i cant connect.
I have a Gateway NV53 laptop that has no problem connecting to the Internet at home, whether when it's connected with the wire, or wireless (with our own secured wireless network).
However, whenever I go in a coffee shop or anywhere else that has a unsecured network for customers, it won't connect, no matter how strong the signal is.
Unable to connect to a unsecured wireless network that ive been connecting to for the last year for about a week today i was able to connect when first starting my laptop but after shutdown and restarting an hour later same problem odd thing i find is there are two other laptops in my home that have no problem connecting to this network at anytime i have very little knowledge of laptops or wireless networks.
I have flashed the firmware on my wireless wrrt54gl router to DD-WRT mini, i now want to set it up to connect to unsecured wireless around the neighbourhood, the only other network hardware at my disposal is a WLAN usb adapter and the Ethernet on my pc.
I'm going to upgrade the routers antenna with bigger omni-directional antenna, and connect to whatever networks pop up on the radar.How do i go about all this in regards to the settings on the router and/or computer?
I can go to the public library and log on without a hitch, but at a coffee house or cafe I can not connect. Sometimes it says 'cannot validate..' and sometimes it just says 'unable to connect to wireless network' What gives?
we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect .
I'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?
I am unable to connect to my desktop's shared folders, and get the message "network path not found" when attempting to go into the desktop. The desktop is connected to the router wirelessly, a pace 2wire gateway, and wirelessly on the laptop. I can see it in the list of devices connected to the gateway, as well as the network folder. I am unable to ping my desktop from the laptop, but i can do so the other way around (desktop can ping my laptop). This is despite turning off windows firewall on the desktop. This started happening right when i got the SP2 upgrade for the desktop, it's a vista system.
Our previous wireless router (Netgear Rangemax wpn802) died yesterday so I went out and bought a Western Digital My Net N900. The issue is that now anyone using the wireless signal can't connect to a shared network folder that they were previously able to connect to using the old router.
I'm not able to log into the old router to see any of its settings. I do have access to the server that has the shared folder - I just don't have any idea what needs to be set in order for the N900 to allow me through to the shared folder - whether it's on the router side or the server side.
when i log onto my laptop a wireless network connection is always shown but i couldn't connect to that network because the error messege is allways shown
I cannot get my laptop to connect to anything but unsecured wireless connections. Ipconfig says Wlan media disconnected. Tried ipconfig /release, renew. Still nothing.
my toshiba L505-S5990 will only allow connections to unsecured networks. finally had to reset my router at home through my desktop as unsecured so I can get a wireless connection on my laptop but of course do not want to keep my home network unsecured.
Unable to connect to unsecured wireless sites using a USB Realtec high gain antenna on a Toshiba laptop running Win7 Pro, 64 bit. Network troubleshooter resets adapter but states it cannot correct the problem. Wireless adapter settings set to High Performance. Latest Realtec drivers have been downloaded and installed. Light on front of the laptop shows that the wireless function is running. Turned the function off, rebooted and then turned it back on. Same result when Toshiba is operating off 110v so power shouldn't be the problem.
I have a HP-G72 C55DX notebook that cannot connect to an unsecured network, it could access encrypted networks but not unsecured, i have windows 7 home premium the funny thing is it connects to the itouch just fine, i looked this problen up on google
I'm not sure why the guest net work is unsecured. I would have thought that would not be an option but it is unsecured. How to secure the guest network [2.4 GHz]? Also when I view the guest list some devices stay displayed whether they are in the vicinity or even turned off. That adds to my paranoia with the guest network being unsecured. I also can't edit the screen names to know who the device belongs to like is available in "my devices", forcing me to keep a MAC address list.
In the process of setting-up a E2500 Linksys router, I set-up my secured network which is working fine but also (I do not know how I did this??) set-up the same named network but it is unsecured. How do I delete this unsecured network.Do I need to set-up the router again?
I'm having a Strange problem. When i try to Explorer files in a network location by typing \<Computer Name> it does not work, Network path not Found error appears. But i can browse files using IP Address.
1. This Happen only at this particular machine only. I can Explorer files using the Computer name from other machines. 2. nslookup shows the correct IP. 3. I can connect to the file server using Remote Desktop by typing the Computer Name.
Today when I tried to access one network folder, I could not access it. I was getting the message "computer name\folder name is not accessible, you might not have permission to use this network resource".Then I went to the host computer and changed the permission to "everyone" but still I'm getting the same message.
I have a router-based home network in which the desktop running XP media center is connected by cable to the router. There are 2 wireless laptops, one running XP home and the other Windows 7.The laptops can talk to each other, and the desktop can talk to the laptops.But I cannot access the desktop from the laptops. I can see the (shared) folders, but when I click on one I get the message: "You might not have permission to use this network resource..Not enough server storage is available to process this command." One solution suggested in several places is to change the IRPStackSize to 15. However, if I start the desktop in safe mode with networking, I can access the files.I can also access the machine using remote desktop.One extra frustration is that this is a problem that has happened relatively recently. It used to work OK.
I have two places that I work out of. One is in Romania and one in Bulgaria. In Romania, I have a small office/home network set up. It has at least 8 computers (including the three that I have with me currently - some wireless and some towers) and a couple of android phones and Ipods. I have no trouble accessing any of the computers shared folders or them accessing mine. There are a varity of operating systems used there from XP, Windows 7 and Mac.Everything works great. All the computers can access each other shared resources. All the computers are set to get IP automatically from my DLink DIR - 600 router. I have brought my three computers to Bulgaria (tower and two laptops). They are all set the same- no changes in settings. However, in Bulgaria, All three computers CAN access the internet but NOT each other.
Is it possible to shared a wireless connection over a separate network. I have a wireless connection i use to access the internet.Its strength isn't good enough to use in the entire space i need.I am looking to connect the pc with the wireless connection to a local wireless network that is in place and functioning (via cable to a wireless router) and share the internet connection.
Have a server linked to four computers and a laptop for a business and can't seem to access shared files on server from other computers as it keeps asking for username and password to access it. Have tried to change from workgroup to domain that the server is on so to create username and password but error message keeps coming up 'a domain controller for the domain ata.local could not be contacted or if just use ata as domain it does not accept any username or password. Also have tried suggestions in other forums such as simple sharing and creating an account on other pc's with same username and password as server. All of the systems are windows xp and the server is windows standard.
I thought that there are more security issues than LAN issues, I have a network with 11 computers of which 1 is SME server and 10 are clients (mainly 256MB DDR1 tech machines withceleron D processors, onboard VGA and sound; there are few 1024MB DDR2, AMD Sempron LE processors). All clients have XPSP3, .NET framework 1.1+2.0, Office 2003, AvastFree 7.0, Mozilla Firefox 7.0 and several utilities not very important. Every client has 2 users (Admin and User) on Local Machine and 1 on DOMAIN (UserDomain). Both User accounts are limited. First, all computers were in same workgroup and not part of DOMAIN. In that time, printers on clients were shared among themselves and worked flawlessly. After joining the clients to the DOMAIN, the work continued without issues. One day, I have changed the name of the SME SERVER computer and the issues have started. Several clients can not connect to those shared printers, even others are using them well. When I want to add shared printer I can not browse the particular computer on which the shared printer is (through ADD PRINTER wizard). I manage to do it writing the full path of the particular computer and there I can choose the printer.
After selecting it, username and password is required to finish the adding. Of course I use the Admin username ad password, and after typing it error message pop up (printer is unavailable or can not connect to it). After this I close all windows, start the adding procedure again, and then I can add the printer normally. The problem continues, because, on those computers on which I have had this complicated way of install, after several days shared printers refuse to print saying Access denied. Then I have to delete the printer again, install it twice and hope to work after that for a weak at least.
The problem is getting bigger, as on one client computer I can not print from browsers (Firefox 7, IE 8) but from Office there is no problem. Of course I have checked other topics about this and use setups-modifications-advices but they did not solve printing problems. I have even reinstalled that computer, but the problem remains.
I am unable to access network shared documents and programs on Windows 7... the problem is more that I am simply unsure of how to proceed more than some sort of hardware or software problem.
I have two computers on a wired network, for simplicity I'll call them computer "A" and computer "B".Computer "A" is running Windows Vista Home Premium SP2, and computer "B" is running Windows XP Home Edition SP3.I can no longer get folders from "B" (XP) to open on "A", I say no longer because I used to be able to get them to open.The folders from "B" appear on the wired network okay when viewed on "A" but when I try to open them I get the message as in the enclosed attachment.I have tried switching off the Firewalls on both computers but that has not worked.
#1 windows 7 computer has a wired connection and #2 windows 7 computer has a wireless connection. When at #2 and trying to save a file to #1, the save time may be about a minute. When doing the same thing from a computer #3 with windows xp, the save time is a few seconds. Tried safe mode with networking. Same thing. Tried disabling remote differential compression. No change. The three computers are in the same workgroup.
I have a 1TB USB hard drive attached to my E3000 (current firmware), I use it for FTP and Shared Media on my network. Recently I have noticed that I have files out there that have 0 KB in size (file names/details are still these), I re-upload the files to the folders and during the upload the correct file size shows but a bit later(within minutes) they all show 0 KB again. I have not seen this type of behavior on an HD before. Additionally, I added some 20 mp3 files to the FTP site, same thing happened but then I zipped up the 20 mp3 files and the zip file uploaded with not problems and is still there with its proper file size, of course this is not a solution when I want to play media files on my TV.
How to get rid of Username Password prompt for VPN user connecting to computer with guest access on shared folders?If a VPN user types any word in the user name and hits enter without password, it gets in and sees shared folders, but I want this prompt to be disabled.
How to place security + a password on a folder that is shared on a local area network. i don't want other users to access the contents in the folder since we are all on the same local network.
I have a user that is trying to save an excel speadsheet that is located in a shared folder on a server, the user can open the file and edit ok but when they try to save the file the progress bar pops up but just hangs then a message pops up to saying "file not saved". They are using Windows 7.The user is new and I have just set up their account so thought it might be permission issues but I have logged the user in on two other different machines (1 win7 and 1 WinXP) and they have no problem at all.
I can't install or extract any file or archive downloaded through shared connection from the 1st PC via a LAN ... tried new LAN and tried switch the LANs but doesn't work always a CRC error when extract an archive or file corrupted when install anything downloaded:this is what I tried so far
-tried download and extract on a 2nd installed windows (I have dual boot) and its same CRC error -tried another non built-in LAN card pci-E x1 and its the same CRC error -tried restore bios to default and its same CRC error -tried putting a laptop on the same line instead of my PC and it works no errors no problems
