Network Itself Isn't Password-protected
Dec 19, 2012
I noticed my connection to my school's WiFi was abnormally poor, so I went into the preferences in an attempt to fix my atrocious connection. In doing so, I accidentally checked some box, and I am prompted with an "enter user credentials" message, or some crap like that. The network itself isn't password-protected, so this is a problem within MY computer. Allow me to reiterate my issue in case there was any ambiguity. I accidentally checked some box that put a password on a normally non-password-protected network.
View 4 Replies
ADVERTISEMENT
Jan 31, 2011
Need to set up the network to be password protected. How do I do this?
View 1 Replies
View Related
Oct 5, 2012
I am not able to connect to password protected network while others get connected to the network and are using it.even if it gets connected it shows no internet access. I tried troubleshooting and it said no valid ip configuration.
View 10 Replies
View Related
Apr 9, 2013
Model wrt54gsWindows xpI got the wireless network setup and password protected and my computer and phone can sign o the wireless network, but when I try to go to a website it doesn't work. If I connect te computer directly to the modem then it works.
View 2 Replies
View Related
Oct 24, 2012
My monthly internet allocation has recently been getting used up far more quickly than I expect it should. I am wondering if someone unauthorised is using my wireless facility. I do not remember ever applying a password to this facility. How would I find out it if has password protection?
View 2 Replies
View Related
Apr 15, 2012
Running three systems, Win 7, XP Media and a Vista system. My problem is with the Vista system. I need to share an external USB drive with the other two systems. Access from either of the other two systems is not allowed, get "Logon Failure: the user has not been granted logon type at this computer" Attempts to turn off "Password Protected Sharing" in the Net and Sharing Center do not work. Click OFF and then Apply results in returning to the ON status. I don't even get a request for a password on the other systems when attempting to map the drive that is on the Vista system. The Vista system is running with no windows password required.
[code]...
View 5 Replies
View Related
Jan 6, 2012
My E4200 settings show both the 5.8GHZ and 2.4GHZ channels to be active, with SSID's displayed. However, when I look for available networks via my laptop(s)/tablets, etc, only the 2.8GHZ channel is visible. I've tried changing various settings and even updated the firmware but nothing has changed.
In addition my "guest" portal displays as not being password protected, even though it is setup for password protection in the E4200 menu.I've rebooted the router several times, but nothing has changed. The 5.8GHZ channel is not visible.The router is also performing frequent random disconnects, but that appears to be a separate issue, based on other posts.
View 2 Replies
View Related
Feb 13, 2013
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP :
Firmware Version:
3.13.23 Build 121225 Rel.37950n
Hardware Version:
WDR4300 v1 00000000
Since I upgraded to the latest firmware I can only use the USB storage sharing when "Access shared storage with password" is left UNCHECKED. If I check the box I can no longer see the storage shares in Windows 7. I have also tried "\tploginlink.net" in the Run box, and it connects but shows me no mounted volumes. Also, Is it possible to set up more than two user accounts in addition to "admin" and "guest"?
View 2 Replies
View Related
Nov 21, 2011
I shared some folders in my C drive and turned off password protected sharing in the network and sharing centre from control panel. However, when I use my Seagate FreeAgent Theatre + to access the files shared online, it keeps asking me to log in with a username and password. How to I disable this?
View 4 Replies
View Related
Apr 23, 2011
I am unable to get my laptop to connect to the internet when my wifi network has any type of security option or authentication selected. i want to password protect my network and it shows that the network name and passphrase i selected are correct on the router setup page. I can connect to wifi just fine when there is no authentication set on the network, but when I change it to WPA2 or WEP or any type of security on the router setup page, my laptop is able to find the network and connect with local only access. it gives me the option to reset the network adapter or generate a new ip address, but the problem still persists, and the connection only works when there is no password. is it my laptop or the router that is the problem. it has worked previously with a different router with password security.
View 2 Replies
View Related
Nov 2, 2009
On my ASA5520 I am trying to do a IPSEC tunnel between two sites. When I ping the protected network on the other side I get this when debugging IPSEC:
IPSEC(crypto_map_check): crypt o map man map 20 does not hole match for ACL man1
Not too sure what this means...
View 11 Replies
View Related
Feb 27, 2009
I got a Studio 1535 Laptop which comes with a Broadcom WiFi card that is named "Dell Wireless 1397 WLAN Mini-Card" in the Hardware Manager.
I tried to connect to my ZyXel WiFi router but though i had it all configured right, Windows would always come up with "you entered the wrong key". After playin around for some time i figured out that everything just works fine when i switched my router from WPA-PSK to WPA2-PSK. My router features both WPA-PSK and WPA2-PSK but since my other PC does only support WPA-PSK the router is set to that and i want it to stay that way. I just don't want to buy new hardware for all my other computers.
So is this WiFi card strictly incompatible with WPA-PSK? Does'nt make any sense to me because WPA2 works just fine! Normally they are downwards compatible aren't they? (Moreover, when setting up a connection i can choose WPA-PSK from the dropdown menu.
View 27 Replies
View Related
Aug 21, 2012
I was wondering is it OK if I leave on my cable modem constantly? I have it plugged in to a surge protector as well as other things including my laptops accessories as well. I work from home so I need to be protected, anyway I read from one source that you should keep the cable modem on as it is too much of a hassle to turn it off and then turn it on as the network could get delayed for a couple minutes or something? Also I read as well though that you should turn off the cable modem once a month or something to clear out memory? Is that correct? I leave my computer laptop on all the time with an exception of one day a week. I turn it off for 8 hours supposedly I read it is good for cleaning out memory etc.
View 1 Replies
View Related
Aug 10, 2012
We have a LAN of 11 computers, I have shared some the folders on my PC because I had to, But I don't want anyone to be able to copy some of the contents........What should I do?
View 3 Replies
View Related
Oct 22, 2012
I try to connect my mac via WiFi I got connection timeout; with my android it keeps trying to connect without success (I didn't change passwords or anything these days).If I choose to connect via guest network everything goes fine.The only way to make it work as expected is to reboot the router.it's a X2000 with latest firmware (2.0.3)?
View 4 Replies
View Related
Jan 25, 2013
Our ISP supplies a Cisco SRP-521w router with our WIMax connection but I have had no experience with these and they look like a ex Linksys product? What they a like for use as a spoke router connected to the core hub (Cisco 2921 ISR G2)?We would be using a GRE Tunnel protected with IPsec 3DES encrypted.The SRP would be using PPPoE to authenticate to the ISP.Any known traps and limitations with the Cisco SRP-521w?We currently use a Cisco 877 for this but wanted to save them fr our adsl links
View 1 Replies
View Related
Jun 27, 2012
I have somthing to ask about the ADSL modem and wifi router. (I am using Windows Xp) I have 1 ADSL modem, TP LINK TD 8812, with 2 port, LAN and USB, on the modem has 5 blinking lights, USB, LAN, ADSL, Internet and Power, I use USB port for my laptop, so that 4 lights were turned on, except the LAN's, I also have a wifi router, TENDA w316r, which is connect to the modem by LAN port, when it's connected, the LAN's light in the moden will turn on. That's what it usually works. But now, when I connect the router to the moden, the LAN's ligh on the modem just flashing then turn off right away, it works fine on different machine. I don't know why, I think it's software problem. What do you guy's think about that ? About the gateway, the modem has 1 gateway, the router has 1 gateway, too. At first, when I connect the router, I can only access to the router's gateway, when I disconnect the router, I'm back to the moden's router, how to fix that ? I want to sefl control which gateway I can connect. And now, I just can't connect to any of the 2 gateway, the router's gateway, since the LAN's light on the moden not turned on, I think that's where it begins. But the modem's gateway ? I can connect to the internet as usually but I can't access to the modem's gateway, whenever I type "192.168.1.1" (modem's default gateway) a window appears (Authentication Required) then I fill the username and password with the right infomation, then click ok but it still appears after and after and after that, when I click cancel, then browser says "Protected Object" and I can't connect to modem's gateway.
View 2 Replies
View Related
Aug 31, 2012
When adding a device that has a web protected setup button, can I use the web protected setup button on my Linksys E2000 router to set up the device even though I setup up my router using the Manual setup on the Web Interface configuration?
View 1 Replies
View Related
Nov 18, 2011
I just installed my Linksys E1000 and it seemed really easy. I allows the Guest Option, named the Network and put in a network Password. When I try to connect the phone, I don't get the screen on the phone that asks for the PW. I can connect as a guest, but it does connect with out even asking the guest password.
View 9 Replies
View Related
Jan 4, 2012
I have a DIR-600 C1 running the latest available firmware version (3.03).
Model: DIR-600
Hardware Version: C1
Firmware Version: 3.03
WiFi Protected Setup is turned ON.I would like to know if it is affected by the new disclosed vulnerability described here:[URL] Also, turning WiFi Protected Setup OFF may not assist to mitigate this vulnerability?
View 2 Replies
View Related
Sep 27, 2010
When the Wrt600N came out, it was said that the "Reserved" button would be enabled by a future firmware upgrade to support WiFi Protected Setup. Surely in the three or so years this has come to pass.Does anyone have a link to information on using WPS with the WRT600n?
View 5 Replies
View Related
Jun 4, 2012
I'm trying to troubleshoot a problem with mpls fast reroute. The primary (protected) link is between PE-PE and the backup link is PE-P-PE. The IGP I'm using is OSPF. When there is a issue with the primary link and debug mpls tra tunnels signalling there is a message "LSP-TUNNEL-SIG: TunnelX [237]: re-route path verification failed (protected) [Can't use link x.x.x.x on node x.x.x.x]". After 30 seconds (without ospf tuning) the SPF is recalcalated, but that's not the point From the show mpls tra tunnels tu1013 (the backup one)everything looks ok:
Status:Admin: up Oper: up Path: valid Signalling: connected From show mpls tra fast-reroute database everything is ok, the status is Ready I'm using 7206VXR, Version 12.4(24)T3
View 0 Replies
View Related
Oct 9, 2012
I've found that Android devices (smartphones for sure, and perhaps other devices, like Windows Vista/XP pc's with some Atheros wi-fi adapters) can't connect to our eduroam network (WPA2 Enterprise) if the Access Points (all from Cisco) also have open SSID's configured in it. Once I protect the open networks with, for instance, WPA-PSK, the Android devices immediatly get connected to the eduroam. Is there any fix that can be applied to the Access Points. Below there's a list fo AP models and IOS version we have running. I may mention that this problem doesn't occur with Access Points from other manufacturers like, for instance, Meru Networks.
In the AP's event log appears the folowing:
"Packet to client 0026.3778.081f reached max retries, removing the client"
The steps to mitigate the problem above were applied, but with no results.
PS: The Android versions may vary with the same symptom.
Device types: AP 1100; AP 1130; AP1140;AP1210;AP1250
View 19 Replies
View Related
Aug 7, 2011
I am using an ASA5510 for internal firewalling in my QA environment. How do I allow RDP from one subnet to those protected by the firewall? Preferably using the ASDM.
View 25 Replies
View Related
May 30, 2012
Let's say I have 3 APs, all connected to a WLC 5508,Each AP has a computer that is connected to it, Computer A, B and C, all on the same Vlan with same SSID
Is it possible to configure so
A and B can not talk to each other but both can talk to C ?
Something like "protected port" feature in the switch world.
View 4 Replies
View Related
Jun 3, 2011
Trying to connect (ipod touch) to DIR-655 with WPA2 enabled.
* Is there a way to connect without having to enter entire Long WPA2 Pre-Shared Key?
* why iPod has required me to enter security password several times - why would it keep losing the saved password I've entered?
- What is the PIN SETTING for on Device homepage? Is that a shortened key?
-I'd already added multiple times in past, too...
View 1 Replies
View Related
Feb 23, 2012
Is WRTU54G-TM affected by Wi-Fi Protected Setup security vulnerability? Device is not mentioned on this list: url..If yes, can it be fixed or is device bricked?
View 1 Replies
View Related
Dec 1, 2012
On Page 16 of my N600 DB manual it says that below the "Router Status Light" and above the "WPS" letters there is a "Wi-Fi Protected Setup (WPS) Light and Button". When I look at my router all I see in this space is a raised rectangular plastic strip. Should I have a light and button there?
View 1 Replies
View Related
Jul 21, 2011
I have bought a new WRT54G2 router since the old one broke down. When I log into the 192.168...and click wireless, it takes me to this window that says Searching for your Client Device....If you haven't clicked wi-fi protected setup button please do so now. It's stuck at 98% and I click on the bottom middle button with the 2 arrows constantly and nothing is happening.
View 5 Replies
View Related
Nov 5, 2011
We are using catalyst 2960S Lan Base IOS on Radio towers. We just bought 50 Accest points, thas are GPS synchronized. Problem is the APs need to be connected on L2-mac betwen each other. But at this time we are using port isolation on each switch (tower) by protected port function to isolate clients from each other.
My question is, is possible to specifi a Mac addresses in specific vlan thats can comunicate betwen protected ports? On tower is one Master unit and others are slave. I thing there is only 1 dirrection comunication - from master to slave.
View 2 Replies
View Related
Apr 10, 2012
I am using a Linksys Wireless-G Broadband Router(Model WRT54G). I am trying to set up a desktop computer to have a wireless usb adapter running so I can connect to the Wireless-G Broadband Router. When I run the setup CD for the wireless usb adapter it asks me to push the Wi-Fi Protected Setup Button on the Linksys Wireless-G Broadband Router.
I have looked at the Linksys router found an obscure button on the front with the Cisco Systems Copyright logo on it. I pushed this but the wireless usb adapter failed to locate the wireless network. There is also another button on the back of the Linksys Router that is a Reset button.
View 1 Replies
View Related
Jun 29, 2012
Besides MAC address filtering, is there another good / easier way to keep visiting laptops etc from plugging in a CAT cable and accessing a LAN protected by a perimeter firewall?
View 5 Replies
View Related
Dec 29, 2011
[URL]I have a Linksys E4200, even if i put wireless on manual WPS is still working, any answer from Linksys?
View 5 Replies
View Related
