Besides MAC address filtering, is there another good / easier way to keep visiting laptops etc from plugging in a CAT cable and accessing a LAN protected by a perimeter firewall?
View 5 RepliesBesides MAC address filtering, is there another good / easier way to keep visiting laptops etc from plugging in a CAT cable and accessing a LAN protected by a perimeter firewall?
View 3 Replies View RelatedBesides MAC address filtering, is there another good / easier way to keep visiting laptops etc from plugging in a CAT cable and accessing a LAN protected by a perimeter firewall?
View 1 Replies View RelatedI'm not sure how I turn off my firewall
View 4 Replies View RelatedI was under the impression that those global addresses that we used with NAT were from the outside IP addresses range?Lets say my outside IP address is idk 192.112.40.11 /30 and I only had two usable IPs (since you can't use network and broadcast IPs) so how would I set up NAT for a couple of Inside addresses with a shorting of addresses like this? Idk if that makes sense what I'm trying to say
View 3 Replies View RelatedI've been trying to open ports 5800 and 5900 for UltraVNC and checking them with online port checkers, but they are always listed as closed. I've even tried taking town windows firewall, my router firewall (although as soon as I disable and apply, it automatically switches back to enabled again), and also DMZ'ing my router. I wonder if it might have something to do with my new modem, but in the config page for that, the advanced settings are locked out. the modem is an arris TM722G, and the router is a linksys wrt-54G with DDWRT firmware.
I'm running windows 7 x64 and using a static local IP, I want to be able to use DynDNS to connect to UltraVNC.
I installed Comodo Firewall today, and I couldn't access my Internet from then. I actually liked it's UI and all and want to keep it. The only something that I felt that might be causing the problem is "Use Comodo Secure DNS Server"? Is it likely the reason to be the cause of the problem?
View 1 Replies View RelatedI have one Fortigate 200B Fire wall, which is using for wifi internet. i had configured one login page in the fourtigate .The path following below system > config > replacement message > authentication > login page.
it was working earlier. suddenly its not working. when i checked this path, that login page message colum was blanked. when i trying to put the message again its not pasting and am unble to type the message also.
Yesterday I was on my cousin's computer, and we had to remove the ethernet cord to connect it to mine as my wireless adapter wasn't cooperating with his internet. This was all fine and dandy until we had to plug the ethernet cord back into his computer. It locks everything up. If you try to open a program, it won't open. If a program is already open when the cord is plugged in, it stops responding within 15 seconds.I called my brother, and he suggested I run a virus scan via Microsoft Security Essentials and MalwareBytes, which I did. MalwareBytes found 5 problems, MSE found 1 additional one. They have all been removed, however this problem still persists. If you try to start the computer with the ethernet cord plugged in, it will allow him to put in his password, it will say welcome for about 3-5 minutes, then the screen will go black. The mouse is visible, doing it's motion to indicate that it's loading something, but it never achieves anything.
View 1 Replies View RelatedI am new to firewalls and I am trying to make mine block specific websites but so far have had no success. Here are the settings I am using in the router's admin area:
Security > Firewall > General
Active firewall
Security > Firewall > Rules
[Code].....
i am using windows vista on my laptop.i was using zone alarm firewall, but switched it to windows firewall.after switching, my internet was cutoff. i can see that i am connected to my network, but cant get to internet.when i run diagnosis on my laptop, it gives me three options:
my Ethernet driver is having hardware issue.
my wireless driver is having hardware issue.
ip protocol binding is having issue. check ipv4 and ipv6 settings.
I have disabled windows firewall in Windows 2003 server control panel but only few ports are shown opened when i scanned with advanced port scanner why other ports are closed.How to open the closed ports?
View 2 Replies View RelatedI'm using Fortigate 200A firmware Versionv4.0.3,build0106,090616 and IPS Definitions 2.00673 (Updated 2009-08-11).
View 1 Replies View RelatedWe have ASA5510 at our perimeter and is running OSPF on inside interface.
1. Iam planning to add DMZ and adding th DMZ subnet also to OSPF process for advertising the DMZ dynanmically into network.
Any security risks?
2. Near future we will add BGP and a perimeter router (Internet router) with Dual ISPs and to advertise the default route from Internet router to OSPF domain- Planning to enable OSPF between Internet router and ASA outside interface and redistribute BGP into OSPF. Would like to know the security risks in doing so. Sample configs below for step1 & 2.
Current:
ASA:
inter Eth0/1
nameif inside
ip address 10.10.10.1 255.255.255.0
[Code]......
Recently i had suffering with wireless connection problem, currently my wireless router connected to WAN directly, after that go into firewall and then go thru switch to end user PC, for LAN user there is no issue, but for wireless connected PC it is prompted with limited connectivity problem(DHCP is disable on router), after check with ipconfig /all. it seem likely due to wireless PC cannot get the IP from DHCP server. i am using DLink615 router. i had checked firewall setting there is firewall policy that connected all router ip into company LAN, but i don't think there is DHCP VPN setting up. is there anyway i can go thru firewall and get IP from DHCP server because if i set up DHCP on router, it cannot pass thru and access to LAN.
View 9 Replies View RelatedAt my small business (30 employees) we currently don't have a hardware firewall. Should I have one? If so what do you recommend? We are all connected to a Windows Server 2003 domain in one office building.
View 7 Replies View RelatedI was wondering is it OK if I leave on my cable modem constantly? I have it plugged in to a surge protector as well as other things including my laptops accessories as well. I work from home so I need to be protected, anyway I read from one source that you should keep the cable modem on as it is too much of a hassle to turn it off and then turn it on as the network could get delayed for a couple minutes or something? Also I read as well though that you should turn off the cable modem once a month or something to clear out memory? Is that correct? I leave my computer laptop on all the time with an exception of one day a week. I turn it off for 8 hours supposedly I read it is good for cleaning out memory etc.
View 1 Replies View RelatedIs it true that the FCC is investigating the Pogo game site because of poor security? Is Java the cause of this problem?I'm very leery of getting on the Pogo site because I've been told that my computer could get a virus and crash.
View 1 Replies View RelatedI'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies View RelatedI have a customer with active/standby on a pair of 5510's with the CSC modules. They were inquiring about the AIP/ASA, and since this would NOT work in their current setup, would getting a pair of 5510/AIP configured for transparent failover work placed in front fo the existing units? Would I need to have a switch placed between the AIP and CSC ASA's? Or would I setup the ASA's for context based Active/Active failover to interconnect the ASA's to the existing units, but I still see a need for a switch.
View 1 Replies View RelatedI want to install Microsoft Security Essential on my PC, but I am not sure which download I need. One says amd64 and the other is x86. I am using windows xp 32bit.
View 2 Replies View RelatedSome security tools and techniques for wireless LAN??
View 1 Replies View RelatedI try to connect my mac via WiFi I got connection timeout; with my android it keeps trying to connect without success (I didn't change passwords or anything these days).If I choose to connect via guest network everything goes fine.The only way to make it work as expected is to reboot the router.it's a X2000 with latest firmware (2.0.3)?
View 4 Replies View RelatedHow can I get the security key password for my iPad?
View 2 Replies View RelatedI have windows xp home and the last few days a security installation has kept trying to install ie: "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) (update 1 of 1)..."
View 3 Replies View Related[URL]I have a Linksys E4200, even if i put wireless on manual WPS is still working, any answer from Linksys?
View 5 Replies View RelatedI know that we need to use crossover cable but what IP addresses to use on both PC/Laptops?Is there any Default gateway?
View 2 Replies View RelatedHow to connect the pc and laptop using LAN cable
View 2 Replies View RelatedI opened my iTunes program today and noticed a roommate's MP3 files were picked up on my network. I think the name of the program is Rocket Tube MP3. Anyway, I came on here because our computers use a Wi-Fi internet connection and I was wondering how much of my web activity (history, cookies, temporary files, etc) he could see from my laptop if his computer was a desktop downstairs. He's very tech-savvy (a former IT guy) and I don't want him snooping through my personal records.
View 2 Replies View RelatedI am not able to connect two laptops using a LAN cable.....
View 1 Replies View RelatedI would like to network 2 laptops for file sharing using a ethernet cable.- mini hp laptop running windows 7 starter, I would like this computer to be connected to the wireless internet at the same time. I know I can't create my own homegroup with this edition.- main computer that runs windows 7 ultimate and do not want to be connected to the internet.
View 5 Replies View RelatedWe are a non-profit organization that is heavily reliant on interns that use their own laptops a lot here. My concern is they come in and connect to our wireless network with no supervision or anything else. I am worried they will introduce a virus, trojan, or something to our network. What the best way to keep them from introducing unwanted malware from a thumb drive, virus in email, or something to that effect shy of standing over them while they install and run an antivirus software?
View 7 Replies View Related