Linksys Wireless Router :: E4200 Wifi Protected Setup Security Hole Discovered

Dec 29, 2011

[URL]I have a Linksys E4200, even if i put wireless on manual WPS is still working, any answer from Linksys?

View 5 Replies


Linksys Wireless Router :: Wrt600n Wifi Protected Setup?

Sep 27, 2010

When the Wrt600N came out, it was said that the "Reserved" button would be enabled by a future firmware upgrade to support WiFi Protected Setup. Surely in the three or so years this has come to pass.Does anyone have a link to information on using WPS with the WRT600n?

View 5 Replies View Related

Linksys Wireless Router :: Is Wrtu54g-tm Affected By Wifi Protected Setup

Feb 23, 2012

Is WRTU54G-TM affected by Wi-Fi Protected Setup security vulnerability? Device is not mentioned on this list: url..If yes, can it be fixed or is device bricked?

View 1 Replies View Related

Linksys Wireless Router :: Wrt54g2 V1.5 Wifi Protected Setup Stuck At 98%

Jul 21, 2011

I have bought a new WRT54G2 router since the old one broke down. When I log into the 192.168...and click wireless, it takes me to this window that says Searching for your Client Device....If you haven't clicked wi-fi protected setup button please do so now. It's stuck at 98% and I click on the bottom middle button with the 2 arrows constantly and nothing is happening.

View 5 Replies View Related

Cisco Routers :: Linksys Wireless-g Broadband Wrt54g Wifi Protected Setup

Apr 10, 2012

I am using a Linksys Wireless-G Broadband Router(Model WRT54G). I am trying to set up a desktop computer to have a wireless usb adapter running so I can connect to the Wireless-G Broadband Router. When I run the setup CD for the wireless usb adapter it asks me to push the Wi-Fi Protected Setup Button on the Linksys Wireless-G Broadband Router.

I have looked at the Linksys router found an obscure button on the front with the Cisco Systems Copyright logo on it.  I pushed this but the wireless usb adapter failed to locate the wireless network.  There is also another button on the back of the Linksys Router that is a Reset button.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Guest Portal Displays As Not Being Password Protected

Jan 6, 2012

My E4200 settings show both the 5.8GHZ and 2.4GHZ channels to be active, with SSID's displayed. However, when I look for available networks via my laptop(s)/tablets, etc, only the 2.8GHZ channel is visible. I've tried changing various settings and even updated the firmware but nothing has changed.
In addition my "guest" portal displays as not being password protected, even though it is setup for password protection in the E4200 menu.I've rebooted  the router several times, but nothing has changed. The 5.8GHZ channel is not visible.The router is also performing frequent random disconnects, but that appears to be a separate issue, based on other posts.

View 2 Replies View Related

Linksys Wireless Router :: E2000 Web Protected Setup Button?

Aug 31, 2012

When adding a device that has a web protected setup button, can I use the web protected setup button on my Linksys E2000 router to set up the device even though I setup up my router using the Manual setup on the Web Interface configuration?

View 1 Replies View Related

Linksys Wireless Router :: Befsr81 V.3 - Missing Security Feature To Setup Secure Wifi Password

Mar 11, 2013

i have a Linksys modem BEFSR81 v.3 and am trying to reset my wifi password for secure connection.  When i log into the the admin page, to my surprise, I could not find the security feature to create WPA or WEP password.  i'm stumped.  This has never occurred to me before on this modem.

View 6 Replies View Related

D-link Dir-600 :: Wifi Protected Setup Pin Brute Force Vulnerability

Jan 4, 2012

I have a DIR-600 C1 running the latest available firmware version (3.03).

Model: DIR-600
Hardware Version: C1
Firmware Version: 3.03

WiFi Protected Setup is turned ON.I would like to know if it is affected by the new disclosed vulnerability described here:[URL] Also, turning WiFi Protected Setup OFF may not assist to mitigate this vulnerability?

View 2 Replies View Related

Belkin Routers :: No Wifi Protected Setup (wps) Light And Button On N600 Db

Dec 1, 2012

On Page 16 of my N600 DB manual it says that below the "Router Status Light" and above the "WPS" letters there is a "Wi-Fi Protected Setup (WPS) Light and Button". When I look at my router all I see in this space is a raised rectangular plastic strip. Should I have a light and button there?

View 1 Replies View Related

Linksys Wireless Router :: E4200 Doesn't Have A Security Key

Aug 10, 2012

I purchased a new router and it doesn't have a security key.  I can't connect my blue ray or roku.

View 1 Replies View Related

Linksys Wireless Router :: How To Setup E4200 As WAP Only

Jan 5, 2013

I am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
I'd still want the E4200 to have a SID key for LAN access security.

View 1 Replies View Related

Linksys Wireless Router :: Can't Get Setup CD To Install E4200

Oct 20, 2011

I have XP 64bit OS and I can't seem to get the setup CD to install E4200 Router. I have looked at the FAQ and it says it should be compatible with all Windows OS. Is there a link out there to the drivers I need to do this?

View 1 Replies View Related

Linksys Wireless Router :: E4200 Setup As Repeater?

Jan 25, 2012

I use my e2000 as router and want to use the e4200 as repeater. so if i connect wireless to my e4200 i can see all my devices also the one on the e2000. How to setup the e42000 ?

View 5 Replies View Related

Linksys Wireless Router :: E4200 Hangs During Setup?

Dec 3, 2011

Have been trying for the past two days to install a new E4200. It gets to 25% in the setup and then errors out and says I need to contact customer service.
Connecting through a brand new DSL modem that I know works as I can get access through my old router.
My PC (Windows 7) is directly connected to the router. I got to the point where I named the router in the install process the first time, but then it hung.
Have tried to use the CD to re-setup with no success. I've tried the hard reset holding in the button for 10 seconds and unplugging but nothing has changed.

View 4 Replies View Related

Linksys Wireless Router :: IPv6 Setup For E4200?

Jun 11, 2012

Our internet provider has no intention of providing a IPv6 DNS so I have a crippled at best service.  We live in an area where our only option is through satellite service, so changing providers in not in the cards, yet. 
If I "Disable" the DHCP Sever, the setup menu provides a method for me to force feed up to three Static DNS addresses, all with IPv4 addresses.
There are several locations that provide "free" DNS service, but how does one verify the security of such sites? Does Cisco keep track of the status of this kind of service or am I on my own?  Cisco seems to endorse two DDNS services, but for home use, the extra charges seem otherwise unnecessary, and do not yet address the IPv6 question.
The first few that I have investigated that do provide IPv6 service also provide their addresses in IPv6 format.  The E4200 menu does not seem to allow me to do that.
Am I going to be forced to live with crippled IPv6?  I have already discovered a software product that has failed since changing routers, but works if I take my laptop to a particular WiFi location.

View 9 Replies View Related

Linksys Cable / Dsl :: X2000 Connection To Protected Wifi?

Oct 22, 2012

I try to connect my mac via WiFi I got connection timeout; with my android it keeps trying to connect without success (I didn't change passwords or anything these days).If I choose to connect via guest network everything goes fine.The only way to make it work as expected is to reboot the's a X2000 with latest firmware (2.0.3)?

View 4 Replies View Related

Linksys Wireless Router :: How To Setup Remote Access With E4200

Aug 11, 2011

how to setup the E4200 so that I can access the media server when I am in office? I was browsing on the Cisco website and unable to find it. 

View 8 Replies View Related

Linksys Wireless Router :: Setup VPN Access To My House Through E4200?

Oct 11, 2011

I've got an E4200 at my house. I'd like to know if it's possible for my to establish a VPN connection from a remote location to login to my E4200 to get access to my computers behind the firewall.

View 1 Replies View Related

Linksys Wireless Router :: Cannot Setup E4200 - No Internet Connection

Aug 9, 2011

I just purchased e4200 from a friend of mine. Got an issue with setup of this device. I use a model from internet provider. Have 2 computers at home. One is pc with cable, another one mac with wireless.SO my issue is that i can not connect none of them. I was trying to use cd that comes with router but he can not locate a router. When I connect cable directly from modem to computer everything works fine. As soon I connect cable to a router I can not see a router and I can not connect to internet.

View 1 Replies View Related

Linksys Wireless Router :: How Does One Connect To Each E4200 On Network For Setup

Jul 30, 2011

So, with the latest firmware update I could add a second e4200 to my network to use as a bridge or access point?  What I need is another device in my living room that can pick up the wireless signal and dish out network connectivity to my receiver, xbox360, and ps3.  With the new firmware update can this be done with a second e4200? How does one connect to each e4200 on the network for setup (dohave to change the default ip address of 1?)I just bought a trendnet TEW-687GA 450 mb/s wireless gaming adapter and a trendnet 5 port switch to accomplish what I mentioned above.  I'm just wondering if there is an advantage to switching over to two e4200's.  The trendnet adapater does not have a 5ghz channel.

View 2 Replies View Related

Linksys Wireless Router :: E4200 / How To Setup Main Computer

Jan 16, 2012

I got a problem with my setup main computer, It work wery god wireless, with very fine speed about 82 mbit in and 24 mbit out. The problem is that it almost don't work at all with cable, even if i turn off the wireless network, the speed is about  2-3 mbit in and about 6-7 mbit out All other computers, tv. printer wireless work very fine.

View 2 Replies View Related

Linksys Wireless Router :: E4200 - Use WPA2 AES Security In Conjunction With Media Device

Jan 24, 2012

I am trying to change the security on my router so I can use WPA2 AES security in conjunction with a media device. The router security page only gives me a choice of WPA2 Personal or WPA2 Enterprise (which requires the use of a Radius Server that I don't have). 

View 1 Replies View Related

Linksys Wireless Router :: E4200 Accessing Modem Setup Page?

Dec 4, 2011

if it is possible to access a modem setup page with a E4200 router? My router is on and modem(WAG-200G) is on, ethernet cable is on internet port on the e4200 and on port1 on the modem. Modem is set is bridge and I set up a ppoe and dhcp on router. Everything is ok, except that i can not access modem setup page to see adsl conection speed and settings.

View 1 Replies View Related

Linksys Wireless Router :: E4200 / Setup Port Forwarding For A XBox 360?

Mar 14, 2013

Trying to setup port forwarding for an XBox 360.  Set fixed IP on XBox using IP outside DHCP range.  DHCP range is .50 to .80.  Set XBox to .49.  Gateway is .1.  Mask is four port forwarding rules per directions on xbox site and also for ports 53, 80, 88, 1074 to the static IP  Turned off DMZ, Turned off UPnP, Turned off SPI.  Windows firewall is on, running XP Pro SP3 and Win 7 Pro on other devices.Making the rules active for the fixed IP shuts off internet access for other devices.Single router (E4200 V2), switch, then remaining devices.  Private IP addresses in the range.  Rebooted router, same issue.  What am I missing?

View 9 Replies View Related

Linksys Wireless Router :: E4200 - Acquiring Network Address In WAP / WAP2 Security Settings

Sep 11, 2011

I have E4200 with fixed ip, DHCP off connected through LAN ports to FIOS ActionTec as  When connecting through wireless network off the E4200, I can obtain and connect fine under Guest network and WEP security, but for any other security setting, WPA, WPA2, Mixed mode, etc.  I get the message "Aquiring network address" forever, and I never get a connection.

View 1 Replies View Related

Linksys Wireless Router :: WRT610N / WRT54G / E4200 / E3000 - Setup Tips

Aug 5, 2011

I am finally duffing my WRT 610N (N=Never consistent in performance) main router and WRT54G that I am using up in my shop as an expander. Now I am going to a E4200 Main Router and E3000 for my secondary router (Truthfully a dual band expander).
Am I going to just simply Flash my 610 to default , disconnect it and pack it away , Setup my new E4200 , Plug in my E3000 into port 1 and go about giving it a separate IP Addy? Or can I expect a **bleep**? Any setup tips?
Wirelessly I am running 2 laptops , a PS3 , Xbox 360 , Epson printer , a picture frame and Samsung Blue Ray and TV, and on occasion 2 android phones. On the Wired side (Ethernet) I have a Sling Box , a Desktop , and the router up in the shop. This is the normal load and never everything all at once (Although it has been done).

View 5 Replies View Related

Linksys Wireless Router :: E4200 Can Give Wifi And Lan Together

Jun 26, 2012

I have a non linksys modem router with wifi capabilities.I want to connect wirelessly the E4200 with my modem/ router ... After that, I want to be connected ONLY to the E4200, wirelessly and wired TOGETHER to have internet to my desktop pc (via lan cable) and to my wireless clients (via wifi).

View 6 Replies View Related

Linksys Wireless Router :: E4200 - Wifi Mac Filter

Dec 7, 2011

It would be nice if there was a "Note" field next to each MAC field whereby you could specify what device the MAC belongs to. I have quite a few listed but recently I've gotten rid of the devices. I have to go through all my current devices, not them in another program, and then remove the ones that are no longer needed.
The Wireless Client List doesn't capture all the names so that's not what I'm looking for.
Also, it would be great if the "Note" would tie into the Parental Controls so that I know exactly what device I'm choosing. It currently lets you select from the Wireless Client List, but the list doesn't have all the Client Names populated.
So, one, is this feature available (or something similar) and two, if not, please take this into consideration as a useful feature for a new version down the road.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Bridge - Would This Be The Way To Go For Max Wifi?

Dec 19, 2011

My e4200 v2 arrived today to replace my v1. I installed it along with a re1000 range expander for our big home. Works pretty well now, but did some google searching and it seems i could make my original e4200 into a bridge, would this be the way to go for max wifi? I could run a cat 6 cable upstairs along the outside of the home fairly easily.

View 9 Replies View Related

Linksys Wireless Router :: Wrt54g Nothing Works After Security Setup

Jun 7, 2012

my mother in law thought she forgot her wifi password so i tried to do a reseti reset it then no internet at all and could not access the router gateway page ( had to set the internet protocol to default and 2 power cycles later i can access the internet.Then i used the linksys disc to set up the security and now it doesn't work can't access nothing through ie.

View 1 Replies View Related

Cisco Wireless :: 5508 - Setup Something Likes Protected Port On WLC?

May 30, 2012

Let's say I have 3 APs, all connected to a WLC 5508,Each AP has a computer that is connected to it, Computer A, B and C, all on the same Vlan with same SSID
Is it possible to configure so

A and B can not talk to each other but both can talk to C  ?
Something like "protected port" feature in the switch world.

View 4 Replies View Related

Linksys Wireless Router :: E4200 - No Wifi After Power Loss?

Aug 26, 2012

well, i just bought an E4200 and, by the way, was very hard to configurate. But the real problem is: if there is a power loss, both modem and e4200 lights up, but no internet connection is provided.Even the SSID desappear. I trried to disconnected everything, reconnect by parts, but no success.I wired  connect the E4200 to my iMac and the router was ok, configurated.Then, i reconnect to the modem and all worked ok.Now im testing possibilities and is i reboot the router, the net desappear and i have to try possibilities till it works.

My older router connected automatically, without a problem, but i decide to buy "the best" brand and its top product". Now im disappointed..
Twice i realize that if the connections drops out, i have to disconnect and reconnect the internet cable from my E4200...

View 1 Replies View Related

Copyrights 2005-15, All rights reserved