Linksys Wireless Router :: E4200 Doesn't Have A Security Key

Aug 10, 2012

I purchased a new router and it doesn't have a security key.  I can't connect my blue ray or roku.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4200 Doesn't Connect To Internet

Jul 9, 2011

I have a Motorola Docis Surfboard model Model SB6120 and can connect to the internet with the ethernet cable directly onto the labtop but if I connect it to the E4200 router the range is there but the internet connection is not.  This happened 2 days ago and can't get the router to work.

View 4 Replies View Related

Linksys Wireless Router :: Putty Doesn't Connect With E4200

Jul 10, 2011

I can't connect with putty to E4200.I tried different ways - telnet, ssh, etc.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Doesn't Recognize Modem

Oct 5, 2012

Ok this is the send router this has happened to but anyway after a power blink the router no longer recognizes that i have a modem connected to it no matter how many times I reboot both of them it can't recognize that i have a modem connected i know it is not the modem because i'm using it to type this right now directly connected to my desktop
 
I have windows 7
Linkysy E4200 V1
Century link DSL modem 660 series

View 9 Replies View Related

Linksys Wireless Router :: URL Blocking Doesn't Work On E4200

Oct 17, 2011

I have the 1.0.03 firmware installed and URL blocking doesn't work.  I assigned the policy to the entire address range and could still access the web site I wanted to block.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Wake On Lan Doesn't Work Over Internet

Aug 12, 2011

I'm having a problem with Wake on Lan.  (I'll bet you never guessed from the title, eh?).  I have an E4200 and I can not get WoL to work over the internet.(I'm assuming it's not actually going out to the internet when I wirelessly wake it using shawn.dynamicservice.com and the subnet, but rather the DDNS name is being resolved through the ARP cache, but I don't know.  I'm still learning) Consequently, if the sentence above in parenthesis is correct, I am unable to perform WoL from outside my LAN.  What am I missing?

View 3 Replies View Related

Linksys Wireless Router :: E4200 Doesn't Connect To Internet Through Bridge

Jul 11, 2012

Im trying to bridge my zyxel eq660r-f1 dsl modem so that i can resolve the nat issue im having in my home network.  Only problem is that everytime I bridge the modem and hook my E4200 up, I cannot connect to the internet.  If i connect my laptop directly to the modem, I do get internet but not through the router itself. 

View 8 Replies View Related

Linksys Wireless Router :: Cascading - WRT54GCv3 Doesn't Get IP Address From E4200 DHCP

May 21, 2011

I've tried to cascade two Linksys routers, but It hasn't worked for me. The first one (which has cable-modem connection) is the brand new E4200, and the second one is the old WRT54GCv3.[code] However, the WRT54GCv3 doesn't get the IP address from the E4200's DHCP. I've also tried to connect them directly (without the PLC), even specifing an static IP on the second router, but I got the same results.I've to state I don't want to change the first router IP/gateway parameters because I have a web and game home server working with an static IP and I don't want to put it offline temporarily because of readjusting network parameters.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Wifi Works But Ethernet Doesn't Work?

May 1, 2013

I have a E4200 v1, connected with a few PCs by ethernet ports and various devices by wifi.  Now the wireless devices work perfectly but sometimes the PC via ethernet ports cannot connect to LAN and internet.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Keep Connected To 5ghz Signal / Router Doesn't Respond To It

Jul 10, 2011

U just bought a new E4200 router to enjoy 5ghz band for the first time.I noticed the range at my house of the 5gh is smaller than 2.4 is that right?one of my pc is having trouble keep connected to the 5ghz signal or the router doenst respond to it, is there a way to improve that signal?

View 2 Replies View Related

Linksys Wireless Router :: Guest Network Doesn't Work In Bridge Mode On E4200

Aug 9, 2011

We have three brand new E4200 routers, all using the most current firmware (1.0.02).   They are all in bridged mode, however when I attempt to enable the guest network on each of them, the config shows it as active, but it never shows up as visiible SSID.   In previous posts, I've seen people saying that I need to do a complete hard reset of the router and re-enter all the configs again to get the guest network active.   Is this true?  I'd hate to think that I have to hard reset and reconfigure all three of these APs, just to get the guest network enabled.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Local Area Connection Doesn't Have A Valid IP Configuration

Feb 14, 2012

I am setting up a new E4200 modem, and have not been able to use the wired connection. The Windows 7 diagnositic on all three computers tells me "Local Area Connection, doesn't have a valid IP configuration."Model: E4200v1..I am using a new E4200 router, along with a new SE1500 5-port switch and a new SE2800 8-port switch.I am using a wired network that consists of two desktop computers, a laptop computer, a network printer, three Direct TV recorders, two Roku streaming video players, a BluRay player, and an XBox gaming console.Here is what I have done so far.

1- I can bypass the router to establish a direct wired connection to the cable modem. This works to access the internet. It establishes a new wired connection called Network 2.
2- I can access the internet using the wireless connection to the router. It shows a valid IPv4 address.
3- With all cables in place, all the lights are flashing on the router and on the computers.
4- I had changed cables and swapped cable ends.
5- Using the wireless connection, I can access the router home page (192.168.1.1). It shows valid IP addresses.

The problem is that my old Linksys BEFSR81 stopped working, with the same eror message for the LAN connection, "Local Area Connection, doesn't have a valid IP configuration."How often does the WAN port go bad? On both a five-year old BEFSR81, and a brand new E4200?

View 7 Replies View Related

Linksys Wireless Router :: E4200 DCHP Client Table Doesn't Reset After Soft Reboot

Jul 15, 2011

One of the many things that I liked about the e4200 over my olg 54GL was the fact that I could reboot it remotely.   However, I've recently had a few problems that only a full power down would fix.   In addition, I've noticed that the DCHP client table doesn't reset when I do a soft reboot.   Is this intentional?   Is the soft reboot not really a full reboot? Can it be made a real reboot?

View 7 Replies View Related

Linksys Wireless Router :: Why Doesn't E4200 Wireless Router Show All Attached Devices

May 1, 2013

I recently installed some wireless IP cameras and when attempting to re-install a camera I went into the DHCP Client table to verify which IP a camera was using to set it up, but I could not...and still cannot see any of my cameras in the table even though I can access three of them directly through the IE web browser. I initially power cycled both the E4200 router and Motorola cable modem, and then later just the wireless router...but I still do not see the devices connected. I currently have 2.0.37 firmware even though I was told by Cisco support that there was a later version available, just before being informed that I do not have support available and could purchase it. I attempted to locate a newer version, but the online upgrade portion of the Cisco Connect software searched the net and then states that I have the latest version available. I also opened a Firefox browser to see if maybe my browser was causing issues, but the same limited table appears without all entries available. I even opened the Cisco Connect software on another laptop with the same limited results. Other than a factory reset, get me E4200 dual band wireless router to show all attached devices through the DHCP Client table as it previously did approximately two weeks ago?

View 2 Replies View Related

Linksys Wireless Router :: Wrt400n Doesn't Show Dhcp Reservation For Security

Jul 27, 2011

i am having an annoying issue with my wrt400n and my foscam FI8918W.  in the dhcp reservation tab, the wrt400n doesn't show the foscam anywhere in the tab.  it shows all laptops, cell phones, nases, etc.  if i use the cisco connect software it does show it in the network map.  i can probably add it manually via the gui.  is this something normal or security cams not considered devices?

View 1 Replies View Related

Linksys Wireless Router :: E4200 Media Server Doesn't Stream DivX To Sharp Aquos HDTVs

Feb 27, 2012

I have an E4200 with a USB hard drive connected to its USB port. I want to use the E4200 media server to stream divx and other video files on my Sharp Aquos HDTVs.I have an LC-70LE732U and a LC-52LE832U wired to my network. Both of them seem to discover and successfully connect to my media server however only MP3s and certain MPG files are detected. None of the AVI files show up.I have upgraded my E4200 firmware to 1.0.03 hoping that would fix the problem but it didn't. I don't want to run a Windows based media server as I don't have a computer that I can leave on all the time.

View 3 Replies View Related

Linksys Wireless Router :: E4200 - Use WPA2 AES Security In Conjunction With Media Device

Jan 24, 2012

I am trying to change the security on my router so I can use WPA2 AES security in conjunction with a media device. The router security page only gives me a choice of WPA2 Personal or WPA2 Enterprise (which requires the use of a Radius Server that I don't have). 

View 1 Replies View Related

Linksys Wireless Router :: E4200 Wifi Protected Setup Security Hole Discovered

Dec 29, 2011

[URL]I have a Linksys E4200, even if i put wireless on manual WPS is still working, any answer from Linksys?

View 5 Replies View Related

Linksys Wireless Router :: E4200 - Acquiring Network Address In WAP / WAP2 Security Settings

Sep 11, 2011

I have E4200 with fixed ip 192.168.1.2, DHCP off connected through LAN ports to FIOS ActionTec as 192.168.1.1.  When connecting through wireless network off the E4200, I can obtain and connect fine under Guest network and WEP security, but for any other security setting, WPA, WPA2, Mixed mode, etc.  I get the message "Aquiring network address" forever, and I never get a connection.

View 1 Replies View Related

Home Network :: Finding Security Options Behind The Cisco Linksys E4200 Router?

Jul 17, 2011

I have a hobby network at home, the structure of which follows:*Modem * - active SPI firewall -- Then the E4200 distributes data via wifi to/between the following machines --*Server - providing services such as http, FTP, VPN, Mail, MySQL, OpenDirectory, Plex media server, etc.*Two other workstations that access their user details/settings from open directory on the server.Now the purpose of this network other than providing standard access to Internet services from within the LAN is to provide access to the services maintained on my server to users on my LAN when they leave it/go mobile.Now with my limited knowledge of networking I have been using port forwarding to direct service requests through the firewall, however I have found with the E4200 that I have a limited number of custom port fields to use (about 15) which is extremely limiting when I have as many potential services that my server can provide.I could move the Server to a DMZ but then dosen't that put all my other services that have no need to be exposed at unnecessary risk.Do I need to invest in a separate hardware firewall and put it after the modem and before the router?

View 1 Replies View Related

Linksys Wireless Router :: Can't Log Into E4200

Apr 4, 2012

I have a recurring issue with my e4200v1. My wired and wireless connections work fine, but I can't get to the administration website. I have https only set up, and after I get thru the 'certificate error' screen, I get an error that says web page is unavailable. Firfefox tells me that the connection was lost - error 101.I have tried wired and wireless, multiple computers, multiple browsers.   I even turned the firewall off on one computer (or I think I did anyway).The only way I know how to fix it is by completely resetting then setting up the router all over again.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Wan Not Available

Jul 27, 2011

Upgraded from WRT610N to E4200. Since upgrading to latest firmware the wan just disappears both 5 and 2.5 Ghz bands. Happened with older firmware but not as often. Using it in briged mode. When this happens I can't even get to the management page with a lan connected pc. Have to do a hard reboot to get it to respond again. This is unacceptable for a router at this price point.

View 2 Replies View Related

Linksys Wireless Router :: WRT600N Standard Verizon Router Doesn't Have N Capability

Apr 6, 2012

The standard Verizon router doesn't have Wireless N capability, so I got the WRT600N (first floor) a while back and connected it to one of the ports on the Verizon router (basement).  I have the wireless turned off on Verizon router. My problem is that anything connecting to the WRT600N has extremely intermittent connectivity. 

View 1 Replies View Related

Linksys Wireless Router :: E3200 Doesn't Always See USB Drive?

Sep 8, 2012

i have a 2tb seagate expansion formatted ntfs.  i am primarily a linux (ubuntu) user, but when the drive drops off, it cannot be seen in any os and it doesn't show up on the router setup page.

View 6 Replies View Related

Linksys Wireless Router :: E2500 Doesn't Act As A DNS Server?

Mar 20, 2012

Just successfully replaced a WRT54GL with E2500 as my primary router. Everything went great and the setup of the new router was easy enough. Everything just works.
 
Except one thing: the new router doesn't act as a DNS server on my network. Therefore, my network shares do not reconnect and I cannot ping the machines using their network name, only their IP addresses. Running ipconfig /all shows 192.168.2.1 as my default gateway and DHCP server, but not as a DNS server. I'm positive that my "old" WRT54GL was acting as my DNS server

View 2 Replies View Related

Linksys Wireless Router :: WRT54G And 196.168.1.1 Doesn't Work

Jun 23, 2010

I've been into the setup page several times over the years but now it won't load.  I recently reset it and want to setup security again. 

View 6 Replies View Related

Linksys Wireless Router :: How To Setup E4200 As WAP Only

Jan 5, 2013

I am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
 
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
 
I'd still want the E4200 to have a SID key for LAN access security.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Not Getting IP Address?

Dec 21, 2011

I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
 
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
 
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Does Not Have Any Provision To Use MAC ID?

May 13, 2013

I bought Linksys E4200, at a time that is the TOP of the line Cisco routers for Home use.I noticed a serious usage issue with it, I could not identify which are the wifi devices connected to choose for access restriction or parental controls, as the dialog box state only as "Network device", and software control by Linksys does not have any provision to use MAC ID or any other option "except " looking at the dialog box as "Network device".

View 4 Replies View Related

Linksys Wireless Router :: Connect E4200 To A Mac Via Afp?

Mar 14, 2011

How to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.  

View 3 Replies View Related

Linksys Wireless Router :: Can't Update E4200 V2

Jan 3, 2013

Trying to update it to the new smart Wifi  but getting this error "Incorrect Image File".Yes Ive tried redownloading yes ive tried different browers and yes to unziping the file! and Yes Im downloading the correct version I even tried version 1 for the heck of it and still nothing. 

View 3 Replies View Related

Linksys Wireless Router :: E4200 V1 Tops Off At 144+450 Not 300+450

Dec 21, 2011

I just received by replacement e4200 v1. I updated the firmware to 1.0.03 build 14 and am up and running just fine. The specs say e4200 should be 300+450Mbps. I am using a software "inSSider 2.0" to view my wireless setup. I get 144(N) at 2.4GHz and 450(N) at 5.2GHz. Please  note these are max bit rates and not connect speed or throughput rate. The "inSSider" software gives me the following:

2.4GHz - 1/2/5.5/6/7/9/11/12/14/18/22/124/28/29/36/43/44/48/54/58/65/72/86/116/130/144

5.2GHz - 6/9/12/15/18/24/30/36/45/48/54/60/90/120/135/150/180/240/270/300/360/405/450

I get this information by hovering on the max bit rate field on the row displaying my SSID. So is it correct to say that my e4200 is not designed to reach 300Mbps at 2.4GHz. There is an earlier discussion thread about connection maxing out 144. Please note I am not talking about connect speed or thru-put speed. Max design bit rates of dual band router labeled e4200.

View 9 Replies View Related

Linksys Wireless Router :: E4200 And Powerline Not Getting Along?

Jul 10, 2011

Just got a e4200. However I also have a cisco av power line adapter which worked fine. However when connecting to the 4200 it doesn't recognize the Internet. Have rebooted, reset switched ports etc. But it still doesn't work. It sees the network but not the Internet. Have tried everything ikon but no luck. Cannot connect my directive to the Internet. If I can't get it to work will have to run a 50 foot cable.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved