Is WRTU54G-TM affected by Wi-Fi Protected Setup security vulnerability? Device is not mentioned on this list: url..If yes, can it be fixed or is device bricked?
View 1 RepliesWhen the Wrt600N came out, it was said that the "Reserved" button would be enabled by a future firmware upgrade to support WiFi Protected Setup. Surely in the three or so years this has come to pass.Does anyone have a link to information on using WPS with the WRT600n?
View 5 Replies View RelatedI have bought a new WRT54G2 router since the old one broke down. When I log into the 192.168...and click wireless, it takes me to this window that says Searching for your Client Device....If you haven't clicked wi-fi protected setup button please do so now. It's stuck at 98% and I click on the bottom middle button with the 2 arrows constantly and nothing is happening.
View 5 Replies View Related[URL]I have a Linksys E4200, even if i put wireless on manual WPS is still working, any answer from Linksys?
View 5 Replies View RelatedI am using a Linksys Wireless-G Broadband Router(Model WRT54G). I am trying to set up a desktop computer to have a wireless usb adapter running so I can connect to the Wireless-G Broadband Router. When I run the setup CD for the wireless usb adapter it asks me to push the Wi-Fi Protected Setup Button on the Linksys Wireless-G Broadband Router.
I have looked at the Linksys router found an obscure button on the front with the Cisco Systems Copyright logo on it. I pushed this but the wireless usb adapter failed to locate the wireless network. There is also another button on the back of the Linksys Router that is a Reset button.
When adding a device that has a web protected setup button, can I use the web protected setup button on my Linksys E2000 router to set up the device even though I setup up my router using the Manual setup on the Web Interface configuration?
View 1 Replies View RelatedI have a DIR-600 C1 running the latest available firmware version (3.03).
Model: DIR-600
Hardware Version: C1
Firmware Version: 3.03
WiFi Protected Setup is turned ON.I would like to know if it is affected by the new disclosed vulnerability described here:[URL] Also, turning WiFi Protected Setup OFF may not assist to mitigate this vulnerability?
On Page 16 of my N600 DB manual it says that below the "Router Status Light" and above the "WPS" letters there is a "Wi-Fi Protected Setup (WPS) Light and Button". When I look at my router all I see in this space is a raised rectangular plastic strip. Should I have a light and button there?
View 1 Replies View RelatedI have AT&T DSL service and a WRTU54G-TM for my wireless router and T-Mobile at Home phone service. The router is in the basement and upstairs near the back of the house Internet connectivity is weak. I have a second router, identical to the first, that I am hoping can be connected to the first, perhaps as a bridge(?).
View 3 Replies View RelatedI have a Verizon supplied actiontec g band router, and would like to place a WRTU54G-TM on the other side of the house to act as a repeater or a wireless bridge (?). I want stronger wireless at that other side of the house and beyond, and use cat5 to hook up some other devices.Can I bridge the actiontec and WRTU54G-TM together, or do they have to be the same brands?
View 1 Replies View RelatedI've got a Linksys E2000 router and a Brother MFC-7840W wireless printer and they don't seem to want to play nice together. The set-up process was fine and I can usually print wireless without a problem, but every so often I'll try to print and my computer will say that the printer is offline. Other computers on my network also show it as offline. The printer confirms it has an IP address, but even after power cycling it won't be picked up by my machines. I've even tried a full reset of the printer and re-configured it, at which point it is able to successfully obtain an IP address, but it still shows as offline on my PCs.
The only solution I have found is to powercycle the router. This always works. Now that's not a terribly inconvenient workaround most of the time, so I've been doing that for a few months now. It obviously implicates the router as the point of failure, but wireless internet access is not affected when the printer appears to be offline, so obviously some packets are getting through normally.
The last couple of weeks the phone line has been dropping until I unplug for about 30 seconds to reset. It is happening more frequently. The phone service through TMobile gets a dial tone and rings several times then drops when making a call.
View 9 Replies View RelatedA client is using Tmobile VOIP using the aforementioned WRTU54G-TM 2-line VOIP wireless router with 4-port hub. What they would like to do is to place this in their network and NOT have it change (route) the network addresses being assigned to devices 'behind' this router so even their wireless devices are all "on the same network" as the wired devices BEFORE this unit, In essence, preserve the same 'network and subnet mask' that is being issued by their DSL router via it's integrated DHCP server. ... Rather like operating this unit like an 'access point' instead of a router.Under most circumstances, I might try to assign this router a static IP outside the scope of the DHCP range the DSL router would supply, then plug the (gigabit) Ethernet network cable into one of the 4 Ethernet ports on the rear of this router - but apparently this does not 'facilitate' a connection to Tmobile's VOIP service.When attempting to do this, the connected telephone devices do not get a phone line connection and the status light(s) that normally indicate proper operation do not illuminate.
View 3 Replies View RelatedI try to connect my mac via WiFi I got connection timeout; with my android it keeps trying to connect without success (I didn't change passwords or anything these days).If I choose to connect via guest network everything goes fine.The only way to make it work as expected is to reboot the router.it's a X2000 with latest firmware (2.0.3)?
View 4 Replies View RelatedLet's say I have 3 APs, all connected to a WLC 5508,Each AP has a computer that is connected to it, Computer A, B and C, all on the same Vlan with same SSID
Is it possible to configure so
A and B can not talk to each other but both can talk to C ?
Something like "protected port" feature in the switch world.
I just installed my Linksys E1000 and it seemed really easy. I allows the Guest Option, named the Network and put in a network Password. When I try to connect the phone, I don't get the screen on the phone that asks for the PW. I can connect as a guest, but it does connect with out even asking the guest password.
View 9 Replies View Relatedi have a E2000 rounter . It's brand new. But i can't setup to use wifi. the software cisco connect can't find rounter. When i plug blue cab from e2000 to my ethernet port on my laptop , icon's network appearen " limit ".
View 3 Replies View RelatedModel wrt54gsWindows xpI got the wireless network setup and password protected and my computer and phone can sign o the wireless network, but when I try to go to a website it doesn't work. If I connect te computer directly to the modem then it works.
View 2 Replies View RelatedMy E4200 settings show both the 5.8GHZ and 2.4GHZ channels to be active, with SSID's displayed. However, when I look for available networks via my laptop(s)/tablets, etc, only the 2.8GHZ channel is visible. I've tried changing various settings and even updated the firmware but nothing has changed.
In addition my "guest" portal displays as not being password protected, even though it is setup for password protection in the E4200 menu.I've rebooted the router several times, but nothing has changed. The 5.8GHZ channel is not visible.The router is also performing frequent random disconnects, but that appears to be a separate issue, based on other posts.
I bought wrt54g2 several years ago and everything worked fine until this week. I got trouble with this router now.All the computers at my home couldn't access to this router even just connect to router's setup page at 192.168.1.1. The only way go to setup page through LAN Cable .I'm afraid maybe there's interference channel with my neighbor, then I did some change to router channel already, but the result same. I still couldn't access to the router through WIFI
Fyi, I did upgrade the firmware with the latest one and all the computers distance to the router not more then 5 m and in the clear area
i have a Linksys modem BEFSR81 v.3 and am trying to reset my wifi password for secure connection. When i log into the the admin page, to my surprise, I could not find the security feature to create WPA or WEP password. i'm stumped. This has never occurred to me before on this modem.
View 6 Replies View Relatedhow to Cascade two routers on one subnet, but when I disable DHCP on the slave router, I cannot add in any DNS settings.
View 4 Replies View RelatedI am unable to get my laptop to connect to the internet when my wifi network has any type of security option or authentication selected. i want to password protect my network and it shows that the network name and passphrase i selected are correct on the router setup page. I can connect to wifi just fine when there is no authentication set on the network, but when I change it to WPA2 or WEP or any type of security on the router setup page, my laptop is able to find the network and connect with local only access. it gives me the option to reset the network adapter or generate a new ip address, but the problem still persists, and the connection only works when there is no password. is it my laptop or the router that is the problem. it has worked previously with a different router with password security.
View 2 Replies View RelatedThere was short power surge ( for a second only), and after that my laptop lost connection with home network. To be more specific, only one laptop lost connection, two other and iPad have no problem to connect. I brought laptop to the store where I purchased it 12 days ago, and there it worked. Brought it home - same thing, it can not connect to home network, and keep getting message that password is incorect ( and is not). Finally, I replaced laptop for completely new one, ant sill have the same problem: can not connect to home network a nd when brought to the store -it works. Of course I did that drill with connect/disconnect modem, router, pc's more than one time.
View 1 Replies View RelatedI am using 3G to access the internet on my PC. I have a 3G modem connected, and want to setup my Linksys WRT54GL router to enable wi-fi, so other devices can access the internet as well.
View 7 Replies View RelatedThe router was working fine when it was setup but was disconnected for a short while. There is now no recognition of the router and the install cd was misplaced...
View 2 Replies View RelatedWe have a Linksys WRTU54G-TM that serves both as a hotspot and phone line (T-Mobile). But since it's a G, the radius doesn't cover the whole house. So instead of buying an antenna, we bought another router (Cisco Factory Refurbished Linksys E1200 Advanced Wireless-N).
So the question is: How do we connect both routers to one modem properly, the N-Wireless to be used when necessary?
Will a MTU mismatch in Nexus 7000 affect the performance ? I have a nexus 7000 at one end with MTU set to 1500 and Melanox bx5020(Storage switch) at other end with MTU set to 9600. Storage team is complaining about performance issue related to slowness.Does MTU mismatch plays any role in slowness ??
View 2 Replies View RelatedI have a existing WiFi ADSL router and I have a WAG120N lying spare in my closet. I recently shifted to my room a floor above. I wanted to amplify signals as the current router is not able to beam signals that far. Hence I wanted to set this up as a WiFi repeater to have a complete coverage. I tried N number of ways but could not succeed.
View 1 Replies View RelatedMy monthly internet allocation has recently been getting used up far more quickly than I expect it should. I am wondering if someone unauthorised is using my wireless facility. I do not remember ever applying a password to this facility. How would I find out it if has password protection?
View 2 Replies View RelatedI just moved and have a new laptop, Comcast came in to reset the cable and internet. A new router was given to us and I cannot seem to access the password. I reset the router and now where to go nest since I try using the IP address and it is not recognizing it. I am using an unsecured WIFI access and I am not comfortable doing so.
View 1 Replies View RelatedThe other day my wifi was working the all of a sudden today my wifi stopped and said it's disconnected. On the router the only non-green light says "LINK"and it keeps flashing orange. How do i fix this because i cannot tweet pics from my phone without this working...
View 1 Replies View Relatedhow to connect a new computer wifi using an existing router ? Have attempted many times but without success.
View 4 Replies View Related