The last couple of weeks the phone line has been dropping until I unplug for about 30 seconds to reset. It is happening more frequently. The phone service through TMobile gets a dial tone and rings several times then drops when making a call.
View 9 RepliesI just bought an ea6500 to replace my old Billion router and up to now all I've had to do is plug my phone line directly into the "phone line in" port on the back of the billion router. But I see there is no "phone line in" port on the ea6500, I don't use a modem and have used the billion router by itself for the past 6 years, is there a way to connect my phone line directly to the ea6500 somehow? My research so far indicates you can't do it via an 'Ethernet / phone line adaptor' as they are incompatable anyway.
The install guide seems to expect a Modem is being used but in my case it hasn't been and I would think a router should perform the basic functions of a modem anyway ?
My concern is that if I really need to purchase a modem then won't this potentially 'throttle' the capabilities of the ea6500 which is the reason I've bought it in the first place ?
If I do need to purchase a modem to get my ea6500 working then what specs should I be looking for ??
I have century link DSL with a Westell 7500. I bought the EA2700 as a replacement. I assume its not a dsl since there is no phone line connection.
View 2 Replies View RelatedI've got a router in room where my cable modem comes in. In center of house, I have another router, N Ultra Range PLUS, WRT160N.
My laptop, which I use in front room near that middle room router and my husband's desktop, also near that middle room have no problems. My desktop which is right next to the main router in back of house (where the cable modem is), has the weakest signal. I guess that's because the WRT160N is further away from it and has two walls to go through. But most of time signal was good - just not as good as the other two computers. And even when signal was Low, it never dropped connection.
Recently I got a new smart phone with WIFI. Anytime I have turned on the phone and used it, I often then have to refresh my wireless signal or reboot computer because it loses the connection. I read somewhere on internet that this may be because of the additional device but again, it doesn't effect the other two closer computers.
I have AT&T DSL service and a WRTU54G-TM for my wireless router and T-Mobile at Home phone service. The router is in the basement and upstairs near the back of the house Internet connectivity is weak. I have a second router, identical to the first, that I am hoping can be connected to the first, perhaps as a bridge(?).
View 3 Replies View RelatedI have a Verizon supplied actiontec g band router, and would like to place a WRTU54G-TM on the other side of the house to act as a repeater or a wireless bridge (?). I want stronger wireless at that other side of the house and beyond, and use cat5 to hook up some other devices.Can I bridge the actiontec and WRTU54G-TM together, or do they have to be the same brands?
View 1 Replies View RelatedA client is using Tmobile VOIP using the aforementioned WRTU54G-TM 2-line VOIP wireless router with 4-port hub. What they would like to do is to place this in their network and NOT have it change (route) the network addresses being assigned to devices 'behind' this router so even their wireless devices are all "on the same network" as the wired devices BEFORE this unit, In essence, preserve the same 'network and subnet mask' that is being issued by their DSL router via it's integrated DHCP server. ... Rather like operating this unit like an 'access point' instead of a router.Under most circumstances, I might try to assign this router a static IP outside the scope of the DHCP range the DSL router would supply, then plug the (gigabit) Ethernet network cable into one of the 4 Ethernet ports on the rear of this router - but apparently this does not 'facilitate' a connection to Tmobile's VOIP service.When attempting to do this, the connected telephone devices do not get a phone line connection and the status light(s) that normally indicate proper operation do not illuminate.
View 3 Replies View RelatedIs WRTU54G-TM affected by Wi-Fi Protected Setup security vulnerability? Device is not mentioned on this list: url..If yes, can it be fixed or is device bricked?
View 1 Replies View RelatedI have a router that i want to connect to my direct tv box. The router only has Ethernet cables on the back and no room for a phone line. how can I connect the phone line to the router?
View 1 Replies View RelatedI have two buildings. In first building I have network with internet. In other building network without internet. I need to connect buildings to the same network using two WAG320N modems by the phone line cable. Is it possible and what configuration I need to set up?
View 2 Replies View RelatedSince I am new to VOIP and am getting confused with the responses online on how to connect to a commercial phone system I thought I would ask here. I have a small voice router (1751) running CME with 2 Cisco 7940 phones. I would like to hook it up to a commercial line, but not sure how to. What specific card will I need for my voice router to connect it to the outside world (FXO right)? I see where they talk about hooking it up directly to the LAN line, another using a commercial phone system, and then the others using a PBX,ect... So confused to say the least. I assume I need an FXO port to connect to the POTS, but not sure if there is anything else I’m missing in the setup...
View 4 Replies View RelatedI have bought a WAG320 & ever since I've had it the ADSL line keeps dropping every few hours. The LAN network is fine & I have 7 computers connected to the router wirelessly. When I press the re-set button on the back of the router everything is fine for a few hours then it starts doing it again?
View 9 Replies View Relatedmy wireless connection always drops when my phone rings. i have a hp compaq presario cq56-115dx notebook pc and a 2wire 496 wireless rounter and i loose connection during internet exploring. WHY?
View 5 Replies View Relatedomputer A connects to modum A thru phone line that needs to stay active for a system to operate. Computer B connects to modem B always using the same phone line a few times a month, what device will alow each computer to know and go to its modem, dialing in on one phone line for two modems, and resting in primary state for system A to operate as a Dialer.
View 5 Replies View RelatedWould one phone line be able to support two ISPs? The rest of my family is using an AT&T line and I'm less than amused with it's performance for 4+ people. I have an unused phone jack available but I'm concerned about ordering the installation package only to find that I need a new phone line)
View 4 Replies View RelatedI usually use the router supplied by my ISP in one room in the house which is where I use all my.computer stuff as I am the only one who uses the internet in our house. However, my sister is round at the moment and the crap router cannot reach her room or the lounge.I thought I would be able to connect a spare router to a phone line port in the lounge with the correct settings along with the original router. However, if one router works, the other stops working. Only.one router will connect to the ISP at any time, I want both to so that we can all use the internet.
View 16 Replies View Relatedhow to use two routers on one phone line 5 miles apart?the phone co put an off premisise extention in two of my houses miles apart they said i could use the dsl at both location but would have to take my router back and forth can antbody tell me how to set up two routers on the same phone line in laymans terms and can both be used at the same time
View 10 Replies View Relatedhow to Cascade two routers on one subnet, but when I disable DHCP on the slave router, I cannot add in any DNS settings.
View 4 Replies View RelatedIn a house that is too large for a small wireless modem to send a signal far enough, is it possible to use a second modem in the same phone line (not at the same time). Filters are used in the spare phone jacks.My main question is: when modem A is being used and modem B is switched off, is it necessary for the splitter for modem B to be removed and the filter put in its place? Or is the fact that modem B is switched off sufficient? I suspect that it's necessary and that's why my friend gets very slow download speeds even when the other modem is off.She insists that it used to work but I think she was just lucky if it used to work.
View 2 Replies View RelatedI want to put a laptop in the barn, with a web cam. I have a phone line (with spare wires) running to the barn and I want to connect my house laptop to the one in the barn.How do I do this?
View 1 Replies View RelatedI've got a problem with my phone line which is preventing me from connecting to the internet.In my house we have a phone line (Provided by Telstra) and Internet (provided by TPG)Recently at 7 at night all of a sudden our internet dropped out. I did some checking around and look at my modem and the DSL light refuses to light up.I disconnect the phone and modem separator and plug the modem in directly to the phone line. Still no DSL connection.When i connect the phone directly to the phone line (and when it goes through the seperator) it still works, but i hear strong grainy static through the phone.
View 1 Replies View RelatedI have a pbx avaya phone system with lines and extension number.I needed a phone with line and extension.So i run the ethernet cable to the office made all connection and connected ethernet wire directly to the pbx avaya, and i got the phone working with the extension.But my question is to get the line working and the extension i have to punch down the cable from the pbx, the ethernet wire and the pair of wire coming in with the line?
View 7 Replies View RelatedI want to add a new phone line to a small office in a hotel. They have avaya phone system and they are currently using 6 or 7 phone lines. From the avaya wires are run to the 66 block and from there to the outlets. So i think i can connect a cable from the avaya to the 66 block and it automaticaly give an extension number, but how do i add a phone line number to that connection?
View 5 Replies View Relatedthat possible to connect one telephone line with two modem (both are wireles)if possible then how?
View 1 Replies View RelatedDSL user. Can two different modems (one wireless and one regular) be used at two different locations in the same house using one phone line..?
View 1 Replies View RelatedI have a phone line and am using a adsl 2+ router for my pc. Now I wish to install a new Tp-link adsl 2+ wireless router for my lap which is used upstairs. and I wish to connect this wireless router to the same phone line with another splitter.
View 1 Replies View RelatedI've got two houses about 5 miles apart anyway the phone co let me have an off premesis extention at no extra charge two phones that use the same number in the two locations they said i can use my dsl at the other location but i would have to use the same modem/router at both locations iam pretty sure i cant use the dsl at both locations at once but is there a way i can set up two routers on the same phone line where i dont have to carry modem/router back and forth.
View 1 Replies View RelatedI just moved offices to one where there is only one phone line - its an ethernet socket. I use the room two days a week, the other guy uses it on the other days. his computer is already plugged into it, how would I be able to switch wires when I'm in there - the yellow cable I have is too short to reach. What would I need to buy and is there something that I can put in the socket to connect both wires so I don't have to keep getting on my knees
View 4 Replies View RelatedI was able 2 find my Evo shift through the ps3, but couldnt get online. I used Astro file mngr to navigate to visionary and run apk, usb debug and temp root but I can't find visionary. Rooting successfully has been difficult so far. Hardwire...maybe plug phone line from modem 2 ps3!??
View 6 Replies View Relatediam having two PC's which are not connected through LAN. in our office we are having a private telephone network and both the locations are connected with this telephone network (MAX) connection. Is it possible to connect the both PCs through remote desktop connection through this telephone network we are having ?. we are provided with internet conncetion for one PC.
View 2 Replies View RelatedI've seen loads of people connecting 2 routers, but they're usually connecting the routers together (as in connecting 1 router to another, which is connected to both the internet and the PC) to boost the performance of the current router, or connect more devices. What seems to be hard to find is what I want to do.
The situation is, I have a Sky Broadband Router (a specialised Sagem router from Sky Broadband ISP) in the back room of my house, and it's wireless range can't reach the front room of my house (where I want to use my wireless laptop). Moving the router is not an option, so I purchased a Belkin 300N Router and plugged it into another phone socket at the front of the house (the phone line was originally just at the front of the house, but was extended to another socket at the back of the house, the one the Sky Router is connected to).
The router is working, but seems to be clashing with the Sky Router, it can't connect unless I turn the Sky Router off, and the Sky router always overrides the Belkin one. I've seen some posts about syncing routers when they're connected, but these aren't, they're just on the same phone line, how to stop them clashing?
I got told if I changed the IP address of the Belkin Router to one similar to the Sky one, and disabled DCHP it would work, but this just messed the Belkin Router up and I had to give it a factory reset!
I am currently in a situation where I want to share internet between a couple buildings at the site I work at. The problem is that it is a forested area and the buildings are about 1/2 mile away from the source of the internet. The only physical connection of the buildings is the phone lines running between them. Is there any way to use the existing phone line to transfer the internet connection to the other buildings and split it between 2 computers. I know that it would probably involve a substantial loss of speed, but I'm ok with that as the internet at the other buildings will not have heavy use.
View 1 Replies View RelatedI need to replace my old router because the wires are broken and the problem is it needs a phone jack for the phone line we use cable not land line. My modem is SVB5120 SURFboard Motorola.
View 2 Replies View Related