My company ordered NAC and ACS 1120 My question is Can i configure 802.1X security through ACS server and NAC in layer 2 Inband Virtual Gateway.for campus switches.Is it the good design to have double security for switch ports. 1st is 802.1X and 2nd is NAC in layer 2 INBAND VG?
View 1 RepliesIs there any way to do layer 3 security like a web login to an LDAP server on the wireless portion of the SA 520W?I'm asking because we have this set up on many of our Cisco Wireless Controllers and I would like to do it on the SA520's as well. I'm not sure if it's supported though.
View 2 Replies View Relatedcan i configure virtual circuits on cisco layer 2 switch catalyst 2950 ?
View 1 Replies View RelatedI want to setup a proxy server and also to create a group policy on proxy that will take effect on two ou's of staff and executives (150 plus pcs) on the executives ou I want the gpo to be only be effective when dey re in the office and non effective when they are outside the office and which to use their own personal internet modem.
View 1 Replies View Relatedconfig setup
protostack=netkey
klipsdebug=none
[Code]....
How I enabled the Virtual Keyboard on the main portal page on our ASDM v6.0(2) ASA v8.0(2). I remember seeing the option once upon a time and now i can't seem to find it.
View 2 Replies View RelatedCan I configure a PIX (515), as PPTP client to establish a tunnel with non-Cisco PPTP server ? Can my PIX initiate this type of connection ?Today, I use a PC with PPTP client to establish this and I want replace this with a PIX and I don´t want depends of a PC.
View 5 Replies View RelatedWhen I create a virtual switch on hyper v, i lose network connectivity and the default gateway is missing I have to manually put the default gateway in and disable and re enable the network adaptor each time the server restarts in order to get network connectivity. I am running windows server 2012 Hyper V Virtual Ethernet Adapter loses default gateway server 2012
View 9 Replies View RelatedI have configured 3355 NAC appliances in HA pair everything is running fine.But not able to Login through GUI (Virtual IP) which is used during the configuration of HA pair.
View 1 Replies View RelatedWe are looking for a solution to avoid VPNs to encrypt data between HQ and Bldgs (point-to-multipoint) Gigabit fiber(untrusted media).Is there any cisco's product providing layer2 encryption over Giga fiber?The HQ has a 6509s and remote bldgs have mixed of 3750s,4500s in trunks.
View 2 Replies View RelatedI've installed version 4.8.02.0010 of the VPN client onto a Dell Latitude D820 laptop. When I attempt to connect, I get this message. There are no firewalls running (I disabled the Windows XP firewall) and I'm running under Service Pack 2 with all of the latest security patches from Microsoft.
I even tried un-installing the client and using an older version (4.8.00.0440) and it reports a similar error in the Log file.
I'd prefer to NOT have to wipe the laptop and reinstall the O/S if I don't have to. This is the only laptop that I've experienced this problem with but it's also the first Dell Latitude D820 that I've attempted to install the client on.
Is there a problem with the Dell Latitudes and the VPN Client? Is there another way around this other than a wipe and re-install?
What is the best internet security for a Gateway laptop with Windows Vista?
View 1 Replies View RelatedIn my office environment, my machine is configured with an IP address, Subnet Mask and a Default Gateway. The Default Gateway does not allow internet connectivity but is configured to provide us with connectivity to some server based tool.
Now in order to provide us with the internet access, a proxy server is configured via the LAN settings in the IE. The problem here is the Proxy is restricted for some sites that I need like certain technical blogs and all, which it filters out in the blogs category and does not load.
I do have another Gateway server address that I can use in Local Area Connection IPv4 Properties as Default Gateway address which removes this restriction. I thought that this should be configurable to the LAN Settings as a proxy as well. But when I do so, I lose the connection to the internet.
I am not sure if all Gateways can act as proxy servers. Or is there anything that I am doing wrong. I am using the default port 8080 in LAN Settings.I can ask this from the technician but I am not sure if he would be able to answer that as he is just a first level guy. I thought of figuring it out myself.
I'm studying for CCNA Sec exam and looking for any security labs for GNS3 or Packet Tracer.
View 3 Replies View RelatedASA 5510 security plus edition will it support active/active failover. and does it support context with securiyt plsu edition. and how many default context do we get with asa 5510 security plus edition.
View 3 Replies View RelatedI have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
View 7 Replies View RelatedIs it true that the FCC is investigating the Pogo game site because of poor security? Is Java the cause of this problem?I'm very leery of getting on the Pogo site because I've been told that my computer could get a virus and crash.
View 1 Replies View RelatedI'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies View Relatedwe are using 2960 cisco switch asn we are trying to configure port security.we are able to configure MAC base port security, but unbale to configure IP base port security.can any one guide us can do IP base port security like MAC port security. if not which switch will support IP and Mac base port security.
View 6 Replies View RelatedI have an Internet link, connected to my Cisco Router. The package I subscribed for comes with a dynamic IP Address. I was told, if I need to remote access into the Cisco Router, I need to enable the DDNS feature. Can this be done on a Cisco Router?
View 1 Replies View RelatedHow do you configure port-security on a 2811 router? If not, is there a way to configure some type of security on each port ?
View 3 Replies View RelatedI want to install Microsoft Security Essential on my PC, but I am not sure which download I need. One says amd64 and the other is x86. I am using windows xp 32bit.
View 2 Replies View RelatedSome security tools and techniques for wireless LAN??
View 1 Replies View RelatedI'm trying to configure TrendMicro IOS content filtering. I have this working on a separate box, running 15.1.
On this particular testbed, I have a 2900 running:
System image file is "flash0:c2900-universalk9-mz.SPA.152-3.T1.bin"
And the following licensing:
Technology Package License Information for Module:'c2900'
Code...
I was informed by a co-worker that there is a security vulnerability with the local certificate authority in the ASA running 8.3 code. I've looked through the security advisories and haven't been able to find anything about this. Was this just misquote or am I missing the security advisory release?
View 1 Replies View RelatedI have a ASA 5505 that I test with which originally came with the Security Plus license. I recently erased flash and loaded the latest asa841-k8.bin version of IOS along with asdm-642.bin. Everything booted fine and came up as it does when freshly wiped however I noticed that i was now only running a base license. If I issue the sh activiation-key command, I noticed the following messages (full output is at the bottom):
The Running Activation Key is not valid, using default setting
......
This platform has a Base license.
......
Failed to retrieve flash permanent activation key
Did I somehow kill my Security Plus licensing when I did the erase flash? If so how do I recover it?
ciscoasa# sh activation-key
Serial Number: JMXXXXXXHU
Running Permanent Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
The Running Activation Key is not valid, using default settings:
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Restricted
Dual ISPs : Disabled perpetual
VLAN Trunk Ports : 0 perpetual
[code]...
This platform has a Base license.Failed to retrieve flash permanent activation key.The flash permanent activation key is the SAME as the running permanent key.
how to configure FWSM module in cisco core switch 6500
View 2 Replies View RelatedI am new to firewalls and I am trying to make mine block specific websites but so far have had no success. Here are the settings I am using in the router's admin area:
Security > Firewall > General
Active firewall
Security > Firewall > Rules
[Code].....
How can I get the security key password for my iPad?
View 2 Replies View RelatedI have windows xp home and the last few days a security installation has kept trying to install ie: "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) (update 1 of 1)..."
View 3 Replies View Relatedmy router has a WPA security system and I want it to be a WEP security system, what must i do?
View 7 Replies View RelatedI am configuring remote access VPN on a cisco router 3845. Works fine.
I was looking for configuring session and idle time configuration for groups and eventually users.
I am using the following Cisco VPN remote access configuration :
crypto isakmp client configuration group mygroup
key xxx
pool mypool
acl 101
max-logins 3
banner ^CHelloo ^C
Is there any command in cisco ios similar to Cisco ASA vpn group 1 session-timeout?