Cisco Security :: Rv042 Vpn Openswan Gateway To Gateway Linux Unbutu
Sep 13, 2012config setup
protostack=netkey
klipsdebug=none
[Code]....
ADVERTISEMENT
Cisco Routers :: RV042 Gateway To Gateway Tunnels Not Reconnecting
Apr 11, 2013I have two Cisco RV042 Routers, they are being used to connect two offices, i have created a standard gateway to gateway connection, fixed public ip addresses on both sides and everything works fine, except when the tunnel gets disconnected, it does not connect back automatically, i have to log into either router console and click the connect button to get the tunnel working again, this is really annoying since it happens once or twice a day at least.
View 2 Replies View RelatedLinksys Wired Router :: VPN Gateway To Gateway With Two RV042 Constantly
Jul 11, 2012My two RV042 , one at home and the other one at my working site, constantly lost VPN connection after successfully connected.Both Firmware are identical. [code]
View 1 Replies View RelatedLinksys Wired Router :: RV042 Gateway To Gateway Connection?
Feb 8, 2011we do have 2 Rv042, one in my office and one in my house.. in the office we do have static ip and at home none.. question is can i connect the two RV042?
View 1 Replies View RelatedLinksys Wired Router :: RV042 - Gateway To Gateway VPN Connection
Mar 22, 2011I have some problems in my network with Gateway to Gateway Vpn Connection using two Rv042 routers.
I cannot ping the computers with static ip configuration.
In local an remote computers who have DHCP ip configuration i can ping each other .
Linksys Wired Router :: RV042 / Setup A Vpn Gateway To Gateway
Apr 6, 2013i am trying to setup a vpn Gateway To Gateway when i setup the vpn i can ping the 2 rv042 i cant see any computer in the network places when there comect we need to see the computer in the network places so are pos will run?
View 1 Replies View RelatedCisco Routers :: RV042 502 Bad Gateway CGI Was Not CGI / 1.1 Compliant
Mar 31, 2013I've got half a dozen RV042 routers in various locations. They are running v4.0.0.07. Seemingly randomly, I got the 502 Bad GatewayThe CGI was not CGI/1.1 compliant. error when attempting to log into the web interface with google chrome (same with IE too). This happens from the LAN side. I actually didn't notice it until my Opsview monitoring software threw up a critical when it didn't get an http response. The router is otherwise actually working just fine.Since the first occurrence, more of my routers have developed the same error.
I've tried different browsers, clearing caches, though I'm not surprised those efforts were fruitless, as there is clearly a problem even when no browser is involved (nagios). The nagios http check also returns a 502 Bad Gateway.
Cisco VPN :: QuickVPN - Gateway Not Responding - RV042?
Oct 28, 2011I'm running Cisco QuickVPN on a clients laptop (Windows 7). Windows firewall is disabled because McAfee SaaS is running.I sometimes have the issue that the initial connection attempt comes back with "Gateway not respoding" during the network verification process. You close the program, you open it again and it works. Sometimes it takes 2 or 3 tries. Today I have the issue that my client tried it like 20 times including several reboots and it's just not working. I tried it from my own computer and it connected fine on the 2nd try.I'm thinking that it might be time-out thing, that the VPN client doesn't receive a response fast enough? I know my clients home internet is darn slow.
View 1 Replies View RelatedCisco VPN :: RV042 Establish VPN Gateway Connection
May 31, 2012I have successfully connected two RV042s to establish a VPN gateway to VPN gateway connection. I have the follow questions:
1. I would like to keep the VPN tunnel connection time indefinite. Is it sufficient by checking the "Keep-Alive" box on the VPN -> Gateway To Gateway -> Advance page? Or, I have to ping the RV042 periodically?
2. Do the "Phase 1/Phase 2 SA Life Time" (on VPN -> Gateway To Gateway page) settings have any impact on keeping the VPN connection time indefinite? What are the optimal values for them?
3. Is there an API, command, or script to replace a manual clicking on the "CONNECT" button to establish the VPN tunnel from the VPN -> Summary page? Or, is there a way to accomplish this at power up?
4. Is there a way to establish a VPN tunnel without going through login and clicking the "CONNECT" button? (Auto connect at power up?)
Cisco Routers :: Set Up RV042 As VPN Gateway For Client
Aug 29, 2011I set up an RV042 as a VPN gateway for a client a year ago. It is running firmware 1.3.12.19-tm (Feb 13 2009 13:03:21). I created a new certificate. When I download the client certificate, It comes as a .zip file. One the can not be opened by a zip utlity (windows, Winzip or 7 zip). It looks like I can just rename the file to a .pem file, but I want to make sure that is right. They were getting QuickVPN timeouts, but that looks like it was fixed in 1.3.13.
View 3 Replies View RelatedCisco Routers :: RV042 Not As Default Gateway?
Apr 11, 2012I have RV042 on my remote network, i have problems with VPN connection , user can connect to RV042 but only inside IPs that can ping from vpn user.Is it any way to make the traffic from Rv042 will back to RV042 . maybe with nat.. in example below 192.168.5.100 is my lan IP from my DSL dhcp, and 172.27.0.20 ip on remote, traffic not back to my pc/vpn client, what i want is to translate 192.168.5.100 to RV042 LAN ip address
1485: ICMP echo request (len 32 id 256 seq 29) 192.168.5.100 > 172.27.0.20
1486: ICMP echo reply (len 32 id 256 seq 29) 172.27.0.9 > 192.168.5.100
1487: ICMP echo request (len 32 id 256 seq 30) 192.168.5.100 > 172.27.0.20
1488: ICMP echo reply (len 32 id 256 seq 30) 172.27.0.9 > 192.168.5.100
[code]....
Cisco Security :: Configure 802.1X Security Through ACS 1120 Server And NAC In Layer 2 Inband Virtual Gateway?
Feb 28, 2011My company ordered NAC and ACS 1120 My question is Can i configure 802.1X security through ACS server and NAC in layer 2 Inband Virtual Gateway.for campus switches.Is it the good design to have double security for switch ports. 1st is 802.1X and 2nd is NAC in layer 2 INBAND VG?
View 1 Replies View RelatedCisco Routers :: RV082 Gateway To Gateway VPN Not Resolving Remote DynDns
Feb 14, 2013I've got two RV082's connected. Each has a dynamic IP (changes typically every few weeks). I've configured the tunnels on both ends with a local and remote "Remote/Local Security Gateway Type" of "Dynamic IP + Domain Name(FQDN) Authentication".If I look at the VPN Summary tunnel status, it shows an IP address of "mydomain.dyndns.org 0.0.0.0" under the "Remote Gateway" column heading. The Tunnel Test "Connect" button is N/A.I can resolve both of the mydomain.dyndns.org entries on both sides of each VPN using the Diagnostic DNS lookup tool within each router. If I hardwire a fixed IP address for the Local and Remote Gateway everything works just fine. VPN is good.
I just can't seem to get the "mydomain.dyndns.org" function to work. It appears the router can't resolve the dynamic IP from the domain names on each of the routers.
Cisco Routers :: How To Manage Port 80 Hosts Via Gateway To Gateway VPN (rv220w)
Aug 30, 2012I replace our aging rv082 routers with wireless rv220w routers. The gateway to gateway vpn works great, however I am no longer able to manage our print servers port 80 management page. I can ping any host with success, and I can manage hosts that have a port 10000 or 8000 web interface - but no port 80 ones... I had no issues when using the old rv082 routers...
View 0 Replies View RelatedCisco Routers :: RV220W Gateway-to-Gateway Inter VLAN Routing?
Jul 6, 2012I picked up a pair of RV220W's and before I spent loads of time at a remote site, I figured I'd go through some VPN testing at home to make sure I could get it setup properly. What this means is I've plugged the Internet uplink into a switch, then from the switch into both routers & configured them (using unique static IP's for each) from there. For what its worth: While I have some IT experience, I don't have strong networking experience.
I setup several VLAN's on the local RV220W, and the end result is to make it so that an asset at the remote site with an IP in any of the ranges (192.168.121.0/24, 192.168.131.0/24, 192.168.141.0/24 and any future VLANs) can communicate with/access resouces at the local site. Likewise, an asset at the local site with an IP in any of the ranges (.121, .131, .141 + any future VLANs) should be able to reach the remote resources (currently just 192.168.181.0/24, but future VLANs as well).
This evening I tried to focus on the relevant VPN pages of the Administration Guide to get the VPN up. Leaving the defaults I got as far as establishing a link between both sites and it seems that things are working right: From the remote site (.181) I can access the local site (.121, .131, .141); and from the local site I can at least ping resources (a laptop) on the remote site. (Yay!)
However, when I physically connected an asset that had a 192.168.121.X, 192.168.131.X and 192.168.141.X IP addresses to the remote RV220W (which is 192.168.181.0/24), I couldn't see it from the remote or local sites.I assume this is expected. But I'm reaching out to the community to see what other possibilities might be available becuase networking is a weak area for me. I figured it might be something like a Static [or Dynamic] Route but I really am not 100% sure.
'TECHNICAL' SPECS
Local Router LAN/WAN Settings:
LAN IP: 192.168.121.1 on default VLAN (1)
VLAN 13 defined 192.168.131.1 with DHCP enabled; Reservations created outside of DHCP scope
VLAN 14 defined 192.168.141.1 with DHCP enabled, Reservations created outside of DHCP scope
Inter VLAN Routing enabled for all VLANs
[URL]
Cisco Routers :: RVS4000 To Use A Gateway To Gateway IPSec Tunnel
Oct 17, 2011Can I have use a Gateway-to-Gateway IPSec tunnel whereby a user can surf the Internet using his local Internet connection and at the same time connect through the IPSec tunnel to a remote subnet using RVS4000 routers?
View 1 Replies View RelatedCisco Routers :: RV016 Gateway To Gateway RV082 Won't Connect
Mar 9, 2012New hardware here, requesting a bit of your knowledge, We are tryingin to setup a simple gateway to gateway VPN
HomeA Has an RV016 with a public static IP
Local Group Security Gateway type is IP Only with the IP
Local Security Group Type is Subnet, with the local IP class 192.160.0.0
Remote Security Gateway Type: Dynamic + Email
Email address some@emailaddress.com
Remote Security Group Type: Subnet
IP Address 192.168.1.0
IPSec Setup as default with nice password.
HomeB has an RV082 with a dynamic ADSL link
Local Group Security Gateway type is DynamicIP +Email
Email address some@emailaddress.com
Local Security Group Type is Subnet, with the local IP class 192.160.1.0
Remote Security Gateway Type: IP Only
Remote Security Group Type: Subnet
IP Address 192.168.0.0
IPSec Setup as default with nice password.
The idea is for HomeB which has a dynamic IP, to reach HomeA, which has a static IP and connect. But they just wont. I have not clue what's wrong, I followed the instructions, maybe i miss interpreted something. I could share the VPN logs for both., Im getting a lot of errors there.
Cisco Routers :: Getting VPN Gateway To Gateway With NAT For Multiple Subnets / RV082?
Feb 11, 2012I have a pair of RV082 routers and I'd like to configure gateway to gateway VPN tunnel as described in a cookbook, "How to configure a VPN tunnel that routes all traffic to the Remote Gateway," (file name Small_business_router_tunnel_Branch_to_Main.doc). I followed this cookbook and found that my while the Main office has internet connectivity, the branch subnet doesn't have internet connectivity.
Routing does behave as advertised, where all traffic does go to the main office. However, the 192.168.1.0 subnet in the branch office does not get internet connectivity. I've read in other posts that the Main office router will only provide NAT for the local subnet, not the branch office subnet. Is there a way to configure the RV082 router to provide NAT for all subnets?
If not, which Cisco product will provide the VPN Tunnel connectivity as well as the NAT for all subnets? Can the RV082 be used as part of the final solution or are my RV082s a wasted expenditure?
Following is the configuration that I'd implemented, (real IP and IKE keys are bogus).
Gateway To Gateway
Remote Main Office
Add a New Tunnel
Tunnel No. 1 2
Tunnel Name : n1-2122012_n2-1282012 n1-2122012_n2-1282012
Interface : WAN1 WAN1
[code].....
Cisco Routers :: RV8082 Setup A VPN Tunnel With Gateway-to-Gateway
Apr 8, 2012I have two Cisco RV8082 Routers which I would like to setup a VPN Tunnel with Gateway to Gateway. One location is a static IP Address. The other location is a dynamic IP address.
View 2 Replies View RelatedCisco Routers :: RV042 QuickVPN / Gateway Not Responding
Jun 28, 2011I have router Linksys RV042 v1.2 with latest firmware Version: 1.3.13.02-tm. And I'm using QuickVPN v 1.4.1.2. I've setup VPN connection with values, below: But every time I'm trying to connect to router by VPN it always popup a window "Remote Gateway not responding".It occurs when I'm trying to connect to VPN behind other router, when I'm connected directly to Internet the connection is established.But I'm connecting to other networks using VPN and it's working properly (behind the same router), so I think it's problem with RV042 configuration but I don't now weher.
View 5 Replies View RelatedCisco Routers :: RV042 / Gateway Setup With Static IP
Apr 7, 2013I am trying to setup the following. We have an RV042 Router and are using it as our gateway at the office. In the office we are using a Windows Domain abc.lan with DHCP of 10.0.0 - 10.0.0.254. The Router/Gateway is setup with a Static IP of 10.0.0.100.A couple of our office employees would like to work from home via VPN using their laptops. With the many options available for this router, I am not clear as to which options and what settings I should set.
View 2 Replies View RelatedCisco Routers :: RV042 - Set A Gateway / Obtain DNS Automatically?
Aug 8, 2011I am setting up a dual WAN network in our small business office and I am confussed on the set up of the RV042.
On WAN1 I have a satellite modem connected
On WAN2 I have a cradlepoint CTR35 Router with a verizon aircard
The satellite has lag issues and will drop out during poor weather but has a 17GB dowload limit. The verizon aircard has only 5GB download limit but normally works in poor weather. Code...
Do I select obtain DNS automatically on both WAN1 and 2? Do I set this up as a gateway or a router?
Linksys Wired Router :: RV082 Gateway To Gateway VPN Not Connecting?
Jan 24, 2012I recently swapped out an RV082 with a newer model (still RV082 but black and a different interface). I configured the Gateway to Gateway VPN exactly as it was before but none of the three other RV082's will connect. I have tried deleting the connections several times to no avail. I have aggressive mode disabled and have tried with the firewall on and off. Below are the settings (IP's have been X'd out) and the log.
Settings:
IP OnlyIP Address : X0X.X0X.20.31Local Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask : Remote Group Setup
Remote Security Gateway Type : IP OnlyIP AddressIP by DNS Resolved : Remote Security Group Type : IPSubnetIP RangeIP Address : Subnet Mask : AES-192AES-256AES-128 AES-192AES-256 AES-128 IPSec Setup3DES Keying Mode : ManualIKE with Preshared keyPhase 1 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 1 Encryption : DES Phase 1 Authentication : MD5SHA1Phase 1 SA Life Time : secondsPerfect Forward Secrecy : Phase 2 DH Group : Group 1 - 768 bitGroup 2 - 1024 bitGroup 5 - 1536 bitPhase 2 Encryption : NULLDES3DES Phase 2 Authentication : NULLMD5SHA1Phase 2 SA Life Time : secondsPreshared Key : Minimum Preshared Key Complexity : EnableLOG:
[code].....
Linksys Wired Router :: RV082 Gateway 2 Gateway VPN Can't Ping
Jul 26, 2012We have a VPN setup between two Cisco RV082 routers, the VPN status shows as connected however I can't ping the other network. I am unable to ping between routers, let alone ping computers behind those routers.
We have 2 branches, branch 1 is on a static IP and branch 2 is Dynamic. I am able to connect via QuickVPN from Branch 2 to Branch 1 and remote desktop to computers, however have yet to VPN/remote desktop in the opposite direction.
To me it seems like a firewall issue at branch 2, but what's causing this. Also they are currently running 2 differnet firmware version not sure if this would cause a problem.
Cisco VPN :: WRVS4400N VPN IPsec Gateway To Gateway Setup?
Jan 29, 2012Just bought 3 WRVS4400N, I wanted to setup gateway to gateway VPN. I followed the instructions on the WRVS4400N admin guide and VPN does not connect. I also downloaded the VPN setup wizard and that also did get the gateway connected. Everything seems to be correct. Do I have to enable anything else? Firewall setting?
Below is my config.
IPSec VPN Tunnel: Enabled
Tunnel Name: TUN01
Local Security gateway: IP only
WAN1 IP: 192.168.100.1
SUBNET: 255.255.255.0
Local Security type: subnet
LOCAL IP: 10.10.10.1
SUBNET: 255.255.255.0
[code]....
Cisco Routers :: Gateway To Gateway VPN Between RV110W And RV042G?
Mar 19, 2013I am trying to set up a gateway to gateway VPN connection between a RV042G (central site) and a RV110W (newest firmware) which is used for presentation purposes on various customer's sites. The RV042G has a static IP. The RV110W has different IPs, depending on where it is used.
Basic VPN settings are clear to me (we have another VPN between two RV042G with static IPs). I set up the VPN connection on the RV042G wth the following settings for "Remote Group Setup":
Remote Security Gateway Type : IP + Domain Name (FQDN) Authentication IP by DNS resolved: mydomain.no-ip.org Domain Name: router12345
The value "router12345" is what I have configured in the RV110W as "Host name" in the network settings.
This configuration does not work so I am obviously doing something wrong. Do I have to use "router12345.mydomain.local" instead if I configured "mydomain.local" as the domain name in the RV110Ws network settings? For my tests the RV110W has a WAN-IP of 192.168.178.100 because it is located behind a DSL-Router. The external IP of this DSL-router is 178.0.x.x. The resolved IP from mydomain.no-ip-org is 192.168.178.100 but when I look in the RV042G log I see the requests coming withg the external IP (178.0.x.x). Is this the problem? The last message I see in the log is "no connection has been authorized with policy=PSK".
Or can I use "IP + Email Address (USER FQDN) Authentication" instead (where can I enter this email address in the RV110W?). Or do I have to use "Dynamic IP"?
Cisco Routers :: Using RV042 As Layer 3 Clear Gateway For Comcast EDI
Feb 18, 2013Comcast installed a new fiber 10M EDI internet connection in our facility the other day and found out it is our responsibility to provide a layer 3 gateway to map the internet connection to the 14 public IP addresses they assigned to us. We are using RV042 for our existing networks with a T1 we had.
Will the RV042 provide the gateway function to route the single IP address comcast provided to the 15 public IP addresses? If so , can you provide the configuration example on this process?
Comcast EDI Connection ---> ???????? ----> 14 Static External Addresses
Interconnect Block 51.235.227.60 / 255.255.255.252.Comcast Gateway is 51.235.227.61Clear Layer 3 device WAN interface: 51.235.227.62
Usable IP Block 51.235.227.96/28Mask: 255.255.255.240Usable Addresses: 51.235.227.97 - 51.235.227.110
Cisco VPN :: Linksys WRT54G To RV042 (Client To Gateway) Access
Apr 12, 2011We recently upgraded from a Linksys WRT54G router to a Cisco RV042 to gain "gateway-to-gateway" automated VPN access. However, we are unable to get "client to gateway" access working.
With the Linksys WRT54G we used a "username" "password" pair for remote client authenication. This worked for both Windows and Mac OS X users using the built-in PPTP client. We found we had to set "encryption" value to "none" on the client side.
I am confused by the setup screens on the RV042. It looks like I must setup a "tunnel" (VPN->Client to Gateway), there is (VPN->VPN Client Access) where I can enter a username/password, and also (VPN->PPTP Server) where another username/password pair can be entered. I have tried all sorts of combinations but "no love". I am particularly mystified by the (VPN->Client to Gateway) settings for "Remote Client Setup"; the client can be calling in from anywhere and there is an option for "Dynamic IP + Email Address" but I'm not sure how that maps onto the client (do they use the email address as their account name?). I have also looked at defining a "Group VPN" where I am given other options. But nothing works from the client.
I just need to come up with some setup that works, that I can document to both PC and Mac users at a miniumum.
Cisco Routers :: RV042 Can't Get Forwarding / Firewall And Client To Gateway VPN
Jun 9, 2012I'm trying to set up a RV042 to do the following:
1) Block all WAN connections, except for:
2) Allow all port 80 connections, and forward to 10.4.20.60
3) Allow all port 443 connections, and forward to 10.4.20.60
4) Allow port 22 connections from specific IP addresses, and forward to 10.4.20.60
5) After a remote client has connected using Client to Gateway VPN, allow that remote client to access anything on the LAN
I'm able to do #1-4 above, but I can't get #5 to work. Or I can get #5 to work, but can't implement the restrictions I need in #1-4. Attached are some relevant screenshots. I think the problem is that I have Forwarding rules set up that require me to have a firewall rule to Deny All Traffic from WAN1 (unless I'm specifically allowing it). In the Access Rules screenshot, rule #6 is the problem. If I enable it (thereby denying all WAN1 traffic), then VPN clinents can't access anything on the LAN. However if disable this rule, VPN clinents can access anything on the LAN, but the firewall also opens up all outside connections to SSH, since that's set up in the Forwarding rules. I would have thought that once a remote client is connected using client to gateway VPN, then that client is considered to be on the LAN, as far as the firewall is concerned. Thus a firewall rule (like #6) that is specified for WAN1 shouldn't effect remote VPN clients.
Linksys Wired Router :: RV0XX Gateway To Gateway VPN?
Mar 6, 2011I have an RV082 and a RV042. I have been able to successfully establish a gateway to gateway vpn connection between them both, and I can remotely administer each router through the VPN connection, but I am unable to ping computers from one side of the connection to the other. For example, a computer in the 10.10.1.0 subnet can't see / ping / communicate with a computer in the 192.168.1.0 subnet.
Below are the configurations for each. Aside from the static IP configurations and the VPN configurations, no other changes were made to the routers. RV082 DHCP Enabled Tunnel Status: Connected Local Group Setup
IP Only: X.X.X.66Local Security Group Type: SubnetIP Address: 10.10.1.0Subnet Mask: 255.255.255.0Remote Group Setup
Cisco Routers :: Quickvpn / Client To Gateway Vpn Rv042 Can Only Ping Router?
Jan 27, 2012I am setting up remote access using an RV042 router. Using quickvpn or a client-to gateway vpn and shrewsoft client, I can only access/ping the LAN side of the remote router and one machine on the remote network. The PPTP server and native Windows 7 connection provide access to all machines on the remote network.I have 2 possible reasons for this and would like to find the real reason:
1) The remote RV042 is behind another router, and that router restricts access other than the PPTP traffic.
2) The VPN tunnels other than PPTP only allow access to the remote LAN side of the router and remote machines that have the remote router defined as their gateway in the IP configuration.
Cisco :: OSPF - Router As A Gateway And Has An Own Gateway?
Jan 29, 2013Can a router using OSPF propagate that he is a router with default-information originate... at the same time when he got an own gateway of last resort to an IP-adress? If so, how? I can't get it to work.
View 8 Replies View RelatedCisco VPN :: RV042G / 1721 - Gateway To Gateway VPN
Mar 23, 2013I try to install a Gateway to Gateway VPN between a RV042G router (LAN1) and a 1721 router (LAN2). The VPN is connected. I can ping the devices from a LAN to the other in the two way.
But otherwise I can't access to the devices of LAN2 from LAN1 like with telnet, HTTP, mstsc, ....
And it is OK to access to the devices of LAN1 from LAN2....
Normally I access to all the resources of LAN2 with the Cisco VPN Client but i try to change it with this router. The firewalls are off on all the computers I look.