How To Get Cisco Security Key
Aug 16, 2012I had my lap top formatted.can not find key for cisco router,
View 1 Replies
ADVERTISEMENT
Cisco Security :: Finding Security Labs For GNS3 Or Packet Tracer?
Dec 19, 2011I'm studying for CCNA Sec exam and looking for any security labs for GNS3 or Packet Tracer.
View 3 Replies View RelatedCisco Security :: Configure 802.1X Security Through ACS 1120 Server And NAC In Layer 2 Inband Virtual Gateway?
Feb 28, 2011My company ordered NAC and ACS 1120 My question is Can i configure 802.1X security through ACS server and NAC in layer 2 Inband Virtual Gateway.for campus switches.Is it the good design to have double security for switch ports. 1st is 802.1X and 2nd is NAC in layer 2 INBAND VG?
View 1 Replies View RelatedCisco Security :: How Many Default Context In ASA 5510 Security Plus Edition
Aug 8, 2006ASA 5510 security plus edition will it support active/active failover. and does it support context with securiyt plsu edition. and how many default context do we get with asa 5510 security plus edition.
View 3 Replies View RelatedLinksys WRT610N Wireless System With WPA-PSK Security / Security Settings Does Not Match
Mar 29, 2012I have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
View 7 Replies View RelatedSecurity / Firewalls :: FCC Is Investigating Pogo Game Site Because Of Poor Security
Mar 24, 2013Is it true that the FCC is investigating the Pogo game site because of poor security? Is Java the cause of this problem?I'm very leery of getting on the Pogo site because I've been told that my computer could get a virus and crash.
View 1 Replies View RelatedSecurity / Firewalls :: Sonicwall Network Security Appliance - Receiving A Content Blocked Message?
Dec 24, 2011I'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
Security / Firewalls :: Connecting To A Security-enabled Wireless Network?
Jan 19, 2013I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies View RelatedSecurity / Firewalls :: Install Microsoft Security Essential On PC?
Sep 15, 2012I want to install Microsoft Security Essential on my PC, but I am not sure which download I need. One says amd64 and the other is x86. I am using windows xp 32bit.
View 2 Replies View RelatedSecurity / Firewalls :: Security Tools And Techniques For Wireless LAN?
Apr 20, 2013Some security tools and techniques for wireless LAN??
View 1 Replies View RelatedCisco Security :: ASA IOS 8.3 Local CA Security Vulnerability?
Apr 9, 2011I was informed by a co-worker that there is a security vulnerability with the local certificate authority in the ASA running 8.3 code. I've looked through the security advisories and haven't been able to find anything about this. Was this just misquote or am I missing the security advisory release?
View 1 Replies View RelatedCisco Security :: ASA 5505 Security Plus Licensing?
May 24, 2011I have a ASA 5505 that I test with which originally came with the Security Plus license. I recently erased flash and loaded the latest asa841-k8.bin version of IOS along with asdm-642.bin. Everything booted fine and came up as it does when freshly wiped however I noticed that i was now only running a base license. If I issue the sh activiation-key command, I noticed the following messages (full output is at the bottom):
The Running Activation Key is not valid, using default setting
......
This platform has a Base license.
......
Failed to retrieve flash permanent activation key
Did I somehow kill my Security Plus licensing when I did the erase flash? If so how do I recover it?
ciscoasa# sh activation-key
Serial Number: JMXXXXXXHU
Running Permanent Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
The Running Activation Key is not valid, using default settings:
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Restricted
Dual ISPs : Disabled perpetual
VLAN Trunk Ports : 0 perpetual
[code]...
This platform has a Base license.Failed to retrieve flash permanent activation key.The flash permanent activation key is the SAME as the running permanent key.
Security / Firewalls :: Get Security Key Password For My IPad?
Jun 10, 2012How can I get the security key password for my iPad?
View 2 Replies View RelatedSecurity / Firewalls :: Security Update Keeps Trying To Install
Dec 28, 2011I have windows xp home and the last few days a security installation has kept trying to install ie: "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) (update 1 of 1)..."
View 3 Replies View RelatedRouters / Switches :: How To Change WPA Security To WEP Security
Aug 22, 2011my router has a WPA security system and I want it to be a WEP security system, what must i do?
View 7 Replies View RelatedTo Get Security Alert From Cisco
Apr 10, 2012I would like to receive Cisco's email alert for bugs, security vulnerability, etc. if there is such service.
View 3 Replies View RelatedCisco Security :: 2x ASA 5510 With AIP-SSM And CSC-SSM On Each One
Mar 23, 2012I want to ask for the possibility of configuration below? 2x Cisco ASA 5510 running Multi-Context mode and Active/Active Failover1 Cisco ASA 5510 (ASA 1) has AIP-SSM1 Cisco ASA 5510 (ASA 2) has CSC-SSMThere are 2 contexts, context A and context BASA 1 is the primary firewall for context A, and secondary firewall for context BASA 2 is the primary firewall for context B, and secondary firewall for context A
Can AIP-SSM on ASA 1 inspects traffic of context B which primarily runs on ASA 2?Can CSC-SSM on ASA 2 inspects traffic of context A which primarily runs on ASA 1?
Cisco Security :: Can't Access Pix 515 Via Pdm
Nov 1, 2004All of a sudden when trying to access my pix 515e with the PDM I get the following ,Gateway Failure The upstream server did not respond correctly to the request. The error was Connection timed out.
View 4 Replies View RelatedCisco Security :: NAT On 2621
Feb 16, 2005i have spent a few hours trying to NAT out a few intenal 192.168.x.x hosts through both my ethernet1/0 interface and also tryed using another IP from the range.
View 5 Replies View RelatedCisco Security :: Will NAC 4.7.1 Work On V4.1.2
May 22, 2011I was running V4.1.2 up until recently for my nac install. This needed to be upgraded to support windows 7 so the CAM and CAS were upgraded to version 4.7.1. The CAS is running a trusted certificate from Entrust and the CAM is running a self signed cert (perfigo).
First question is will this work with version 4.7.1? I have read a lot of threads about SSL being used between the CAM and CAS.
I have gone through the steps to export the CAM Cert and import it into the CAS Trusted certificate Authorities and vice versa but I still get the following error message on the CAS:
"Warning: The current Trusted Certificate Authority URL is suited for lab environments only. Cisco recommends importing a third-party Certificate Authority. Please check your Clean Access Manager(s) and standby
Clean Access Server for similar messages. "
Is this purely because I am using the self signed Cert on the CAM? If I purchase a cert from Entrust for the CAM, will this correct the problem?
Cisco Security :: 871 - Ssh Not Working
Nov 2, 2011I am setting up ssh on my 871 router and I get prompted for only a password. I have typed in the correct password and it doesnt let me in. I also have telnet enabled and with telnet I do get prompted for both username and password and I am able to login. I would like to setup ssh so that it used the local username and password. This is what my vty has.
line vty 0 4
access-class 23 in
privilege level 15
login
transport input telnet ssh
Cisco Security :: How To Upgrade To NAC 4.9 On CAM / CAS
Feb 16, 2012I have a NAC platfom with CAM/CAS - 4.7.2 and Agents - Windows - 4.7.2.10 and MAC - 4.7.2.507.
I want to upgrade to NAC 4.9 on the CAM/CAS and but want to know if CAM/CAS 4.9 will be compatible with agents Win/MAC 4.7.2.10/4.7.2.507 pending when I upgrade the agents on the Client machines. For certain reasons we do not want to do the Agent upgrade yet.
I have gone through the NAC 4.9 CAM/CAS/Agent Compatibility Matrix in the NAC 4.9 release notes but I am still not clear on this.
Cisco Security :: NAC 4.7.2 - OOB And 4507E
May 31, 2011I have NAC 4.7.2 and I am trying to add a 4507E chassis to our OOB switches. I have had no luck. I was asked to do the following
h localhost -U postgres controlsmartdb -c "INSERT INTO supported_switch VALUES ('1.3.6.1.4.1.9.1.1286', 4, ‘Cisco Catalyst 4500 E-Series 4507R+E');"
But we got this error
ERROR: invalid byte sequence for encoding "UTF8": 0x91HINT: This error can also happen if the byte sequence does not match the encoding expected by the server, which is controlled by "client_encoding".
Way To Get Security Key
Aug 23, 2011Way to get Security key
View 2 Replies View RelatedCisco :: ASA Interface Security Levels?
May 25, 2011*By default, the interface with higher security level can access "interfaces" with lower security level*By default , lower security level interface has no access to higher security level interface (access list needed to permit access
View 9 Replies View RelatedCisco Security :: ASA 5520 - Upgrade 8.2.x To 9.1.x?
Jan 17, 2013I have a project to upgrade an ASA 5520 to 9.1.x, then add another ASA for failover. What will be the correct way ?
I had the 2 Gb memory.
I have rewritten all nat statements (during my other 8.2 to 8.3 or 8.4 upgrade project, the nat conversion was catastrophic, so I rewrite all now).
Can I upgrade directly to v9 ? Or 8.2 -> 8.4 -> 9.1 ?
I think to :
- inject actual config in the new ASA in 8.2
- remove nat statement
- upgrade to 8.4
- configure new nat
- upgrade to 9
- connect the new ASA to the network and deconnect the other ASA
- test
- upgrade old ASA to 8.4 or 9 directly ?
- configure failover
Cisco Security :: CSC-SSM-10 Module Cannot Update
Jan 28, 2011I have Cisco ASA 5510 with CSC-SSM-10. ASA anti-virus service can not update the Base and Plus lisense. No Activation Code required for renewal. I go to "Administration> Product License" in the CSC SSM console and click "Check Status Online" to get the latest expiration date.In the module on the Check Status Online has reported the following error when: Base License status could not be checked because of a license server failure. "Please try again later", "Plus License status could not be checked because of a license server failure. Please try again later". UPDATE manual virus database can be seen in the latest available version, can not be upgraded because the service expired.
View 2 Replies View RelatedCisco Security :: 880 NPE / How To Change License
Mar 26, 2012i have cisco 880 with NPE licence, but i need encryption on this device. I change IOS to c880data-universalk9-mz.151-3.T1.bin, but i still have NPE License and only Evalution without NPE. How can i have permanent license?
show license all
License Store: Primary License Storage
StoreIndex: 0 Feature: advsecurity_npe Version: 1.0
License Type: Permanent
License State: Active, Not in Use
[code]....
Cisco Security :: Does SVI ACL Have Impact On CPU On 6509
Nov 15, 2011Does the SVI ACL have impact on the CPU on 6509 ?
View 7 Replies View RelatedCisco Security :: 851 SSL CA Certificate Chain Not Available
Sep 21, 2012I've got a Cisco 851 running IOS12.3. I'm trying to install a SSL Certificate but after following all the instructions and installing a CA certificate I'm not getting the full chain of authority in a browser just the devices certificate itself. I've repeated the installation process using individual CA certificates all up and down the chain but still the same results.
View 1 Replies View RelatedCisco Security :: Clone XP System With CSA 6.0.2?
May 24, 2011Can I clone an XP system with CSA 6.0.2 installed? I saw the document about 5.x, but I was wondering if that had changed for 6.0.2.
View 1 Replies View RelatedCisco WAN :: Why 857 Adv Security Don't Have Class And Policy Map
Feb 1, 2012Why my 857 adv security don't have class-map and policy map command ? now i wanna use traffic shaping on this but when i use command class-map it doesn't have. [code]
View 3 Replies View RelatedCisco Security :: PIX 535 Maximum Connections
Jul 5, 2011We have a PIX 535 with unlimited lisence, it has 1,048,953 in use connections because the timeouts have been changed to 24 hour. I am addressing this issue but was wondering why its so high when the max concurrent sessions is supposed to be 500,000 as listed in the product spec. Also when it reaches it max and cannot allocate a connection what PIX syslog error message number would it send?
View 1 Replies View Related