I have Cisco ASA 5510 with CSC-SSM-10. ASA anti-virus service can not update the Base and Plus lisense. No Activation Code required for renewal. I go to "Administration> Product License" in the CSC SSM console and click "Check Status Online" to get the latest expiration date.In the module on the Check Status Online has reported the following error when: Base License status could not be checked because of a license server failure. "Please try again later", "Plus License status could not be checked because of a license server failure. Please try again later". UPDATE manual virus database can be seen in the latest available version, can not be upgraded because the service expired.
I have windows xp home and the last few days a security installation has kept trying to install ie: "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) (update 1 of 1)..."
I am having trouble updating the epld image on the 10gb Module of Nexus 7k. we have two nexus and two 10gb module. Tried the other one and it worked fine. its jsut the first one that has problems with the epld image. i have tried on both the nexus on two different slots and still the same error.
I get the following error:
Chain connectivity is broken while upgrading the FPGA. (Error Number : 36)
One of my client want to upgrade its already installed ASA5540-bun-k9 by adding CSC-20 Module. As per below link CSC-20 is supported with ASA5540. but for any reason the ASA5540 bundle option with CSC Module is not available that create confusion.Will CSC-20 Module work with ASA5540-bun-k9 [URL]
I have requirement received from one of my customer. the part number given as ASA5540-AIP40-K8, same time requesting for addition of another 4Port GE Module (i believe its SSM-4GE Module). Is any option to add this module in to the above specified model (ASA5540-AIP40-K8).
As per my understanding the ASA5540 have the option to add 1 additional module only, so if we AIP-SSM module, we don't have any free slot left with to add another SSM-4GE Module in the firewall.
i am not getting even the option to add SSM-4GE in the ASA5540-AIP40-K8
I recently applied a new activation key to an ASA5512 to add the 250 anyconnect essentials user. However, after reboot, I lost the 3DES/AES license which now reads disabled.
how to re-install the 3DES key?
I cannot find the old "Get a FREE 3DES" activation link - it says http:403 error.
Has any else encountered the SSLVPN not functioning on a Windows client AFTER installing KB2585542? If we install the update, we can't use SSL VPN with the AnyConnect client until the update is removed.
I installed a CSC-SSM-20 module on ASA 5510. After policy services have been enabled, services works well for a few minutes, after that the cpu usage's module rise to 100% and all http traffic is wholy blocked, till the cpu usage go down.This happens very frequently and traffic stay blocked for such a long time that it makes the csc-ssm module unusable. It's disabled right now. ASA version is 8.2(1)and CSC-Module version is 6.6.1172.0.
I run a website for a local football team using Serif Webplus X6. On uploading the weekly updates of the site the process seems ok for a few minutes with progress bars showing uploading of files but then it all stops and I have to reset my wireless network adaptor 1703 and it continues but I can't just leave it to work on its own. Device manager says that the drivers are up to date but I'm fed up with having to nurse the adaptor. This didn't happen with previous computers.
I have installed CSC-SSM-10 on cisco ASA 5520.I am facing two problems
1 : When I send traffic from ASA to SSM module then internet connection becomes slow and sometimes internet session disconnected. 2. When I try to manual update then following erros shows please see attachment .
I have a 1941 that I am going to deploy with a HWIC-D-9ESW switch module (I only need 3 switch ports but need the PoE). I am going to hang a 1262 autonomous AP off one of the ports but I need to configure MAC address port-security so that only that AP can pass traffic. I know the switch modules are 'almost' exactly like a switch for commands but I can't seem to enable or configure any port-security settings. Is port-security no available on the switch modules?
I have to upgrade to an ASA 5510 CSC, and the new license is generated, the file you sent me licensing, only seen this:Activation Code not required for this renewal. Please go to "Administration> Product License" in the CSC SSM console and click "Check Status Online" to get the latest expiration date (BASE: 09/04/2014, PLUS: 09/04/2014).This means that what I have not make any upgrades or license charge in the ASA? Does the automatic update is made?
I have a WRT610N (v2) router and I recently updated the firmware to the most current version 2.00.01 build 15. I can no longer set WPA2 security for both bands (used to work just fine). Every time I try to save settings for WPA2 for the 5 GHz band, it tells me it was successful but then displays that the security mode is disabled (and it shows up on my computers list as not having any security enabled. If not, where can I get a copy of the old firmware that worked?
My company ordered NAC and ACS 1120 My question is Can i configure 802.1X security through ACS server and NAC in layer 2 Inband Virtual Gateway.for campus switches.Is it the good design to have double security for switch ports. 1st is 802.1X and 2nd is NAC in layer 2 INBAND VG?
ASA 5510 security plus edition will it support active/active failover. and does it support context with securiyt plsu edition. and how many default context do we get with asa 5510 security plus edition.
I have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
Is it true that the FCC is investigating the Pogo game site because of poor security? Is Java the cause of this problem?I'm very leery of getting on the Pogo site because I've been told that my computer could get a virus and crash.
I'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
I want to install Microsoft Security Essential on my PC, but I am not sure which download I need. One says amd64 and the other is x86. I am using windows xp 32bit.
I was informed by a co-worker that there is a security vulnerability with the local certificate authority in the ASA running 8.3 code. I've looked through the security advisories and haven't been able to find anything about this. Was this just misquote or am I missing the security advisory release?
I have a ASA 5505 that I test with which originally came with the Security Plus license. I recently erased flash and loaded the latest asa841-k8.bin version of IOS along with asdm-642.bin. Everything booted fine and came up as it does when freshly wiped however I noticed that i was now only running a base license. If I issue the sh activiation-key command, I noticed the following messages (full output is at the bottom):
The Running Activation Key is not valid, using default setting ...... This platform has a Base license. ...... Failed to retrieve flash permanent activation key
Did I somehow kill my Security Plus licensing when I did the erase flash? If so how do I recover it?
ciscoasa# sh activation-key Serial Number: JMXXXXXXHU Running Permanent Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
The Running Activation Key is not valid, using default settings:
Licensed features for this platform: Maximum Physical Interfaces : 8 perpetual VLANs : 3 DMZ Restricted Dual ISPs : Disabled perpetual VLAN Trunk Ports : 0 perpetual
[code]...
This platform has a Base license.Failed to retrieve flash permanent activation key.The flash permanent activation key is the SAME as the running permanent key.
I'm having trouble connecting to my IPS module via ASDM and web browser after configuring an IP address for the IPS module via CLI.The 5510's management port is plugged into our switch, and a VLAN is assigned at the switchport. I gave the IPS module an IP address in the same subnet (DG as well) as the 5510's management port, assuming the IPS module would communicate over the 5510's management port. Is this not right? I'm limited to the CLI for now, and would really like to access the IPS module through the ASDM.
i bought new RF Cisco 7204VXR NPE-G1. As soon i enable OC3 module ( PA-POS-OC3SMI) CPU of the router shoot to 100%, and if i reboot the router, it wont comeback not even on Console. I had to remove the POS card and then boot router and then hot insert the module.
so i put the command int pos 4/0 loopback internal
as soon igave this command, CPU dropped down to normal. Whats the deal here? now i need to activate the circuit on this POS interface, but as soon i remove loopback internal command , CPU shoots to 100% Although CPU sorted dont show any process causing it.
I want to add module of WS-X6716-10GE(-3C). The type of 6500 isCisco WS-c6509-e (r7000) processor (revision 1.2).Can I add this module to this type of 6500?Do I need to reset the 6500 in order to the 6500 receive the module?
I have the situation with my new Cisco 2951 router. It has only one module on board - SM-D-ES3-48-P. I don't know what is wrong but I can't see any information about this module. When I connect my laptop to any port it's become green, but it's still green even after I disconnect PC from this port. Sh ip int brief command shows only built-in gigabit interfaces. I also connect my second PC to the router by console to monitor any changes when I connect or disconnect laptop to the module's ports. [code]
