Wireless Home Network With Verizon Internet Security - Changing IP Address?

Dec 24, 2011

I have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop

View 6 Replies


ISP / Verizon - How To Setup Home Network

Sep 20, 2011

I have a router supplied by my ISP, Verizon[a g-router] using with 2 desktop and 2 laptop computers. All but 1 laptop are still running XP.So far I have not tried to print over the network. The printer is connected to the desktop that is also wired to the router.how to setup printing across this wireless network. Must I setup another internal home network in order to do wireless printing?

View 1 Replies View Related

Home Network Fails After Uninstalling Norton Internet Security

Nov 12, 2012

My Vista computer and my XP computer had been happily "talking" to each other, sharing files and printers. I got tired of paying $70 a year for Norton Internet Security, so I uninstalled it (using the Norton removal tool) and selected the Windows Firewall. I also installed Avast! and SuperAntiSpyware. Now neither computer talks to the other. When I run "\FamilyRoomHPOfficeJet" I get "Windows cannot access \FamilyRoomHPOfficeJet" . Check spelling, etc. Get error code 0x800704b3 "The network path was either typed incorrectly, does not exist or the network provider is not currently available..." What have I messed up by going from the Norton firewall to the Windows one.


View 14 Replies View Related

Changing IP Address In Static Network?

Jul 11, 2011

I am connected to a static ip network. This network sets local ips to connected computers but general ip is the same: static ip of network. When i go to "whatismyipaddress", I can see this static ip. I want to change my ip address. I have no chance to use proxy server or router connection. Is there a way to change my ip address? (Because some sites ban ip address, ex:rapidshare etc. and I need to change my ip)

View 1 Replies View Related

Home Network :: Netgear Router WNR 2000 V3 - Cannot Access Internet When Security Password Chosen?

Apr 13, 2013

I just bought a Netgear Router WNR 2000 v3 and installed it. I got inside the router and could set up a Network Name and security key. However, I can not access the internet when I chose a security password using WPA 2, WPA-PSK + WPA 2 PSK, or WPA/WPA 2. It only accesses the internet when I chose None.( no secured ).At this time, my network is unsecured because there isn't way I can access the internet when I create a security key using the 3 options the router offers.

Note : I have tried the 3 security options creating a key number and my computer connect to the wireless network but don't access the internet. It only access the internet when I select None ( no secured )

View 2 Replies View Related

How To Find Wireless Security Key On Verizon Router

Jun 1, 2011

How can I find my wireless security key on my Verizon router

View 2 Replies View Related

Protocols / Routing :: Internet Does Not Work After Changing IP Address

Jul 15, 2012

well i had the same problem because i got bored and i was like hmm i wonder if i can change my IP and i tried it and i had the same problem but when i did system restore it still did not work, now i have to get a new operateing system...

View 10 Replies View Related

Protocols / Routing :: Change Ip Address Without Changing Internet Connection?

Jun 11, 2011

How i can change my ip address without changing my internet connection??

View 3 Replies View Related

Home Network :: Cisco Linksys E1500 - Wireless Security Protocol For Guest Network?

Oct 29, 2012

Having an issue with a Cisco Linksys E1500 on a home network. The device has a feature to provide a guest wireless network but the guest network can't get to the internet. A wired connection is fine, as is the normal wireless network but not the guest. The cheesy thing is, that it doesn't list an option for what type of wireless security protocol you want on the guest network. I'm assuming that it uses the same security protocol that the normal wireless network uses, but who knowsEspecially weird is that it asks you what password you want on the guest network but then the guest network show to be insecure when you try to connectthought maybe it was something funky with some of my configurations so I went ahead and factory defaulted it and just set it up with an insecure network for both the normal and guest networks. This didn't solve it. The guest network still couldn't get to the internet. In fact, the guest network can't even ping the router.

View 1 Replies View Related

Cannot Connect To Internet After Changing Wireless Network?

Mar 26, 2012

I have two separate wireless networks in my house, one of them is for sharing my NAS data and the other is for Internet.problem is when I connect to the NAS network and after that I change my network to the other network, I can not connect to the internet ( I can connect to the wireless).
Just after restarting I can see the Internet

View 4 Replies View Related

WEP Security Setup - Can't Connect To Home Wireless Network

Feb 23, 2013

I have a work supplied laptop. Used to be able to connect to my home wireless network - this stopped working last week. It can connect to other wireless networks, both at the office and other public places, but can't connect to my home network.

I've tried: Manually creating the wireless network Removing the profile from regedit Removing the profile from ProgramDataMicrosoftWlansvcsProfiles

It sees the network and attempts to connect, but never successfully connect. I have other laptops at home that are working just fine. The network is setup with WEP security, and I've entered/reentered the password several times.

Note, when I started this, the home network did not appear under the Manage Wireless Networks list in the Network and Sharing Center.

View 1 Replies View Related

Wireless :: Connect Verizon Wireless Can't Locate Ip Address?

Mar 4, 2012

Dell Inspiron 1300, Windows XP Wireless Dell Card - trying to connect laptop to verizon wireless. message is "Wireless Nework Connection - Aquiring Network Address" but after a few minutes it tells me "cant find IP address". Next, opened Network Connections - Status - Support tab = Address Type: Invalid IP AddressNext, clicked on Details =

View 1 Replies View Related

Verizon Changed Isp And Now Security Camera Can't Connect

Sep 9, 2012

My internet connection was lost and after calling Verizon, they talked me through adding a different isp address. Now my internet works, but when I went to my D-view cam (this is where the daily footage is stored for security camera DCS-930L), I can't make the connection. It says COM1 is not working. I know the camera works through the wireless router, but somehow the connection between the camera and the D-view cam doesn't.

View 3 Replies View Related

Linksys Wireless Router :: E4200 - Acquiring Network Address In WAP / WAP2 Security Settings

Sep 11, 2011

I have E4200 with fixed ip, DHCP off connected through LAN ports to FIOS ActionTec as  When connecting through wireless network off the E4200, I can obtain and connect fine under Guest network and WEP security, but for any other security setting, WPA, WPA2, Mixed mode, etc.  I get the message "Aquiring network address" forever, and I never get a connection.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - Printer IP Address Keeps Changing

Jul 4, 2011

Much of the time my wireless printer is offline relative to computers on my LAN because the IP Address has been changed to some value different than what the computer thinks it should be.  So I have to figure out what the IP Address is of the printer then modify the printer port on the PC to point to the correct address.  If this only happened rarely or if I could easily remember the steps I have to take to remedy the situation, I guess this would not be such a big deal.  But it happens a lot and I'm old and alzheimery.  So my question is: how do I get the router to assign the same IP Address to the printer all of the time?

View 2 Replies View Related

Find Security Key For Home Network?

Oct 26, 2011

How do I find my home network security key?

View 1 Replies View Related

How To Find Security Key For Home Network

Nov 8, 2011

I cant remember how to find my security key to set up a new desktop on my home network.

View 1 Replies View Related

Cisco Firewall :: ASA 5505 With Verizon Home Fios Service?

Feb 13, 2013

connecting ASA 5505 with the Action Tech Router?

View 1 Replies View Related

Home Network :: Bypassing Copyright Security?

Jul 2, 2011

There must be a way to strip off the copyright security coding of things like itunes files, software disks etc.

View 1 Replies View Related

Android - How To Find Home Network Security Key

Apr 25, 2012

I am trying to connect my android to my home network how do i go about that?

View 1 Replies View Related

Home Network :: IP Address With Unrestricted Browsing In Network

Oct 9, 2012

Well I went to command prompt and typed command ipconfig /all and saw the ip address my system was configured to. Dunno why, but I manually set that ip address in my IPv4 internet settings and got access in my hostel. Now suddenly the access is gone. What should I say, the ip address that I set my laptop to has been shut down ? It doesnt work any more? How do I get another IP address like that which gives me no restricted browsing? What does the admin do in the laptop that suddenly it gets unrestricted browsing privileges?

View 1 Replies View Related

Home Network :: Getting Name And Last Name For A Dynamic IP Address

May 3, 2011

I am wondering if there is any way to get the name and last name of the person that has the internet connection corresponding to a particular dynamic IP address that I know, that was used to send an email at a particular date and time that I also know.

View 5 Replies View Related

Home Network :: Ip Address In Same Subnet?

Nov 20, 2012

i want to give my switch a ip address with same subnet as a pc which is for eg having ip address of class a and subnet of

View 4 Replies View Related

Home Network :: Finding Out IP Address?

Oct 1, 2011

I am doing a security course and I need to find out the IP addresses of the devices on my network in order to carry out a ping of death on one of my devices. I've done the ipconfig command but that doesn't give me the information I need.

View 5 Replies View Related

Home Network :: Using Netbios Instead Of IP Address?

Mar 18, 2013

How can i connect two computer in same LAN with Netbios

View 3 Replies View Related

Block A Mac Address From Home Network?

Dec 16, 2012

How to block a mac address from my home network?

View 4 Replies View Related

Home Network :: Change Ip Address?

Jan 27, 2013

I play a game via gameranger, and i want to change my ip address. the replays for this game retain the ip of each player, so that is how it is traced. I have used various ip changers, however they only work properly when i am the host of the game. How to keep my ip protected 100% of the time, rather then only when i am hosting?

View 1 Replies View Related

Home Network :: Connecting Remote Sites - Security Required?

Apr 8, 2011

for example, there are 3 sites, A, B and C. A and B are 1.5 km apart and both are separate LAN(mixture of wireless and wired). C is 35 km apart from A and B. I have to connect A, B and C so that they can communicate with each other. Security is required.

View 8 Replies View Related

Home Network :: Use Internet Of Workplace From Home Via Dial-up Connection?

Oct 3, 2011

I have ADSL modem in my workplace that is connected to a switch and other workplace computers are connected to this switch so the ADSL internet is shared in LAN network.(in each of computer I set default Gateway to ip of modem .....)I want to dial my workplace from home and then use of workplace internet or connect to workplace LAN.(such as VPN or Port Forwarding or I don't know...)

View 11 Replies View Related

Cisco Security :: ASA-5505 - Getting Home Users Internet Access?

Feb 28, 2013

I have configured and tested an ASA-5505 that will be deployed at a customer's home.  The ISP cable modem will connect to the E0 (outside) interface of the ASA.  All other interfaces on the ASA are configured for the inside network I have created a VPN site-to-site tunnel between this ASA and the UC540 to allow subnet access to the internal networks on the UC540. 

 The user has requested that all the network devices used by the rest of the family will only need to connect to the Internet.  They will not need access to the VPN tunnel and they will not need access to the computers on the inside network.  I was planning on performing the following tasks to get this to work.

View 2 Replies View Related

Home Network :: Virtual Servers On One IP Address

Aug 6, 2012

I have one dedicated IP issued to my home, along with another dynamic one if I need it(but I don't use it). I have a webserver, mail server, and name server up and running on a single machine exposed to the internet with my static IP. I have a domain name registered to my IP address. My webserver and name server work great, but I am having difficulty with the mail server. In order to have mail work correctly, I have been told that I need to get reverse DNS setup for my domain (something I had neglected to do). My nameserver responds to reverse lookups correctly when issued locally, but it looks like queries from the internet never reach it (I think my ISP catches requests upstream). I contacted them and they put a PTR record in for my IP pointing to ns1.mydomain.com. This all works fine, but the thought occurred to me that if in my hosts file I put my MX record in as mail.mydomain.com., any mail clients that do a reverse lookup of my IP won't get mail.

View 6 Replies View Related

Changing Security Key On Laptop?

Nov 4, 2011

How do I change my security key on my laptop?

View 1 Replies View Related

D-Link DIR-825 :: Changing Security Key?

Jan 29, 2011

How to change the security key. How does one go bout that? Did not see that within the manual for some strange reason.

View 1 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved