I play a game via gameranger, and i want to change my ip address. the replays for this game retain the ip of each player, so that is how it is traced. I have used various ip changers, however they only work properly when i am the host of the game. How to keep my ip protected 100% of the time, rather then only when i am hosting?
View 1 Replies
I need to connect to my work PC remotely through VPN, but the address of my home router (Verizon Fios) conflicts with my work address. IT guy at work is clueless, so I am stuck - been trying with him for months and this is his solution. I need to change my address on my personal router, Westell brand, but I am having no luck. I have been told to use:
ID: admin
password: password
When I tried that, each time I press a key in the password field, it enter 4 characters... I have never seen anything like that. Honestly, I'm a graphic designer and am also clueless on networking issues.
Simply put, a wireless network was set up with a network name and password in a senior community of primarily beginner users. Recently the name and password became changed to that of a community member named, let's say, "Joe". After addressing the router several times to change things back - only to find that the network name reverted to Joe - I changed the router password from admin to a unique pw and I confirmed that Remote Management was off. Next day... it was Joe again
View 3 Replies View RelatedAre there any logs maintained in Windows 7 when someone changes his/her ip..I mean if I was previously at 192.168.62.111 and then I change to 192.168.62.110 would it get logged somewhere in my PC??How can I view it??And finally how can I destroy that log or stop this logging feature...
View 1 Replies View RelatedIn short, I had the following problem in the past but it solved itself when people physically left the area. Now they are back, the problem is occurring and this time I have as many router settings as I can find to maybe aid in the solution.This is the problem:We have a wireless network where the physical equipment is not available to users and yet, the local network name and password continues to be changed wirelessly FROM say, "ABC network" with network password "ABC secret password" to "Jimmy's Network" and network password "some new string of letters and numbers". (we know who Jimmy is but will not approach him until we learn if this situation is inadvertent on his part or more purposeful, which we doubt as of now)Cisco Lynksys Wireless-N Home Router WRT120N[CODE]
View 1 Replies View RelatedWell I went to command prompt and typed command ipconfig /all and saw the ip address my system was configured to. Dunno why, but I manually set that ip address in my IPv4 internet settings and got access in my hostel. Now suddenly the access is gone. What should I say, the ip address that I set my laptop to has been shut down ? It doesnt work any more? How do I get another IP address like that which gives me no restricted browsing? What does the admin do in the laptop that suddenly it gets unrestricted browsing privileges?
View 1 Replies View RelatedI am wondering if there is any way to get the name and last name of the person that has the internet connection corresponding to a particular dynamic IP address that I know, that was used to send an email at a particular date and time that I also know.
View 5 Replies View Relatedi want to give my switch a ip address with same subnet as a pc which is for eg having ip address of class a and subnet of 255.255.240.0
View 4 Replies View RelatedI am doing a security course and I need to find out the IP addresses of the devices on my network in order to carry out a ping of death on one of my devices. I've done the ipconfig command but that doesn't give me the information I need.
View 5 Replies View RelatedHow can i connect two computer in same LAN with Netbios
View 3 Replies View RelatedHow to block a mac address from my home network?
View 4 Replies View RelatedI have one dedicated IP issued to my home, along with another dynamic one if I need it(but I don't use it). I have a webserver, mail server, and name server up and running on a single machine exposed to the internet with my static IP. I have a domain name registered to my IP address. My webserver and name server work great, but I am having difficulty with the mail server. In order to have mail work correctly, I have been told that I need to get reverse DNS setup for my domain (something I had neglected to do). My nameserver responds to reverse lookups correctly when issued locally, but it looks like queries from the internet never reach it (I think my ISP catches requests upstream). I contacted them and they put a PTR record in for my IP pointing to ns1.mydomain.com. This all works fine, but the thought occurred to me that if in my hosts file I put my MX record in as mail.mydomain.com., any mail clients that do a reverse lookup of my IP won't get mail.
View 6 Replies View RelatedTo put it simply, my parents live far enough in the middle of nowhere that they have no access to high speed internet. Of course, there are always wireless solutions, but the options around here are pathetic and comparable to dialup. They were content with this; I moved back in with them for the time being and am not.y solution has been to dump just shy of $1,000 into a point-to-point wireless bridge setup that claims to have a range of 5 miles non-line-of-sight. I have one antenna set up four miles away on top of a building that has high speed internet.Unfortunately, I was a stupid fool and set that end up without enabling security, thinking that it wasn't a big deal. Nobody in that town has a mind for anything but farming and drinking. That was my mistake. Some asshole set a password and forced me to do a factory reset on the access point and now I can find no IP address. It's like it only reset halfway to factory defaults or something
View 6 Replies View RelatedIn my router I can set rule that all traffic incoming to router's extAddr:8888, is forwarded to my intAddr:8888. But I also need reverse rule that packets originating from intAddr:8888 are translated to extAddr:8888. Can I do that? What technique can I search on google to find more information, because it is not port forwarding. I would calll it reverse port forwarding or static port address translation, but I do not find anything useful in internet searching these keywords.
View 3 Replies View Relatedwhat application/service is sending out net bios broadcasts on a network segment the requests are for machines that no longer are on the network but something is trying to obtain there ip address as they are not in dns any more i am assuming this is why they are resorting to netbios broadcasts i need to some how isolate what application or service is trying to find out.
View 9 Replies View RelatedI am trying to set up a WAP4410n Wireless access point and add to my home network. One problem I can't seem to get around. The IP adress range setup does not accept 1 (example 192.168.1.245) as a range setup for IP address. How do i get in communication with the unit when I can't view the setup due to the factory default set as 192.168.1.245? If it were 192.168.0.245 I could easily change my routers IP range to include it.
View 0 Replies View RelatedI have a high speed wireless DSL router from my ISP (Telus). I use one port off the router to connect directly to my desktop computer. Another port is connected to a switch to which ethernet cables to three other rooms are connected. My problem is that when I connect my Bell PVR (9242) to the 'switched' ethernet cable, I'm apparently not able to get a dynamic ip address, which the Bell unit requires, and can't connect to the network.can I connect another router, in place of the switch, to deliver dynamic IP addresses to whatever I connect to the ports in the other rooms in my house?
View 2 Replies View RelatedI have recently bought a Asus Eee PC with Windows 7 starter.It will connect ok to public Wifi (i.e. at the Qantas lounge) but will not connect to my home Wifi network - Netcomm N150 Router. The two other computer at home (running full versions of Windows 7) work fine over this network.When I look at the Station list in the Router's interface the MAC address for the new laptop appears but it has no IP address. [code] Have tried the obvious things like power cycling.
View 13 Replies View Relatedi have a new smc router and my local ip address and remote ip addresses are very similar. The remote ip address is updating my dns server but i am unable to ping it. Its something like 122.61.xxx.1 ?
View 8 Replies View RelatedI have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop
View 6 Replies View RelatedI am working with MS Windows 2008 R2 and a Belkin F5D8635-4v1 router.
I have already set up a dynamic IP address which points to my router at home. In my home network I have multiple PC's that I would like to access from the internet. I would like to achieve this without needing to change my port forwarding rules on my router each time...
My thoughts are that I use a single dynamic IP address pointed to my router. My router then forwards to a server with some sort of software that can then forward to the correct PC based on the host name.
So I have 3 domains set up all pointing to the router's IP address:
dest1.domain.com -> 41.xxx.xxx.45
dest2.domain.com -> 41.xxx.xxx.45
dest3.domain.com -> 41.xxx.xxx.45
The router is not smart enough to redirect by host name, so it will just forward everything to 10.0.0.20 The server based at 10.0.0.20 must then have software to now redetermine the target based on the host name. The rules would be set up as follows:
dest1.domain.com -> 10.0.0.22
dest2.domain.com -> 10.0.0.24
dest3.domain.com -> 10.0.0.26
I would like to be able to browse the Internet from my home IP address while I am away from home (using a notebook)
View 6 Replies View RelatedI have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address
- The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
How exactly do you change your IP Address?
View 8 Replies View RelatedI'm wondering is there a way that i could actually change the IP address of a computer based on its MAC Address that is connected to a network via switch only ? By running some bat file ? I only manage to change a target computer ip,dns,subnet via running the bat file on the physical computer but not through a network with switch.
View 11 Replies View RelatedMy IP address was stolen. Someone sent me a file that I was expecting. It had a very misconcieving title. I opened it and it wouldn't work, but I let it slide. A week or two later I found pictures of myself on a forum from a hacker. The file I had opened had been a virus that hacked into my webcam. This creep told me that this had spread to 1000+ people and they all had my IP address. I am so scared! If everyone has my IP address anything could happen. How do I change my IP address without it messing up other settings in my computer and how do I remove this virus from my computer?
View 3 Replies View RelatedI tried using mac changing programs and tried to change it from the registry but none of the methods worked for me.
View 3 Replies View RelatedI have a TP-Link device TL-WR340G Wifi Device. I connect a PC through one of the LAN ports.Mow my WiFi router's MAC address has not been registered at my ISP system. I need to find a way to 'change' my Routers MAC address to another MAC address. The cloning doesn't work. I need to change my Router's LAN MAC address.
View 6 Replies View RelatedHow to change my routing address 192.168.1.1 to 192.168.0.1?
View 1 Replies View Relatedi always get ban i czero due to high ping is there any way i can change my ip address so i can get in server again
View 8 Replies View RelatedI'd like to register another account in a forum to comment anonymously so I need a different IP address for browsing.I remember that I had been trying this long time before but it was not easy to make it. Using proxy website is useless because the speed is very very slow. Is there any way to painlessly, easily change IP to browse websites?
View 4 Replies View RelatedHow to change IP address in windows 7
View 1 Replies View Relatedhow do I change the ip address of a wireless printer?
View 4 Replies View Related
