I need to connect to my work PC remotely through VPN, but the address of my home router (Verizon Fios) conflicts with my work address. IT guy at work is clueless, so I am stuck - been trying with him for months and this is his solution. I need to change my address on my personal router, Westell brand, but I am having no luck. I have been told to use:
ID: admin
password: password
When I tried that, each time I press a key in the password field, it enter 4 characters... I have never seen anything like that. Honestly, I'm a graphic designer and am also clueless on networking issues.
I play a game via gameranger, and i want to change my ip address. the replays for this game retain the ip of each player, so that is how it is traced. I have used various ip changers, however they only work properly when i am the host of the game. How to keep my ip protected 100% of the time, rather then only when i am hosting?
I have a TP-Link device TL-WR340G Wifi Device. I connect a PC through one of the LAN ports.Mow my WiFi router's MAC address has not been registered at my ISP system. I need to find a way to 'change' my Routers MAC address to another MAC address. The cloning doesn't work. I need to change my Router's LAN MAC address.
I have bought a new belkin router since my old ITI router had some problems and it died. My ISP used to check my old router's mac address to authorize me to use the internet but since i have changed my router i cant access the net from home anymoreBefore i used to change the mac address of my laptop to be same as that of router to be able to access the net. How to change my new belkin router's mac address to the old ITI router's mac which i have saved in my laptop.
How come my IP address does not change when i'm using my router.... (TP-link WR340G)But when i connect my DSL directly to my computer it my IP can be changed..... and when i put back my router my IP address is the same.
Le Pan 2 tablet keeps trying to "obtain IP address." I have a dlink 655 router. I've removed the password from the router. Rarely will the tablet connect.
I used to have a Thomson st-330 USB modem for my ADSL network. When I wanted to change my IP i just disconnected and reconnected a dial up connection that does the job instantly! (a wan miniport + a batch file to disconnect/recoannect with my password and username)Few days ago i bought a new modem/router (TP-LINK TS-W8951NS)Before that all I knew was that if I wanna change the ip address (if I have a router) was a batch file with commands ipconfig /release/renew.I now know that this changes the ip of my PC not the global IP! So how would I change it without restarting the router? (When i change something in my router interface page (PVC1.2.3....etc) my IP changed instantlybut how do I do this without accessing the router, like commands and a batch file etc? I just found out that my global IP changed on its own after like 30-60 min :S why is that! and to do so manually???
since my network (static ip, cameras, and other boxes) is set up using 10.0.0.xx. How do I change the default ip address on the Linksys e3500 wifi router to 10.0.0.xx?
I have noticed that after the new Firmware Update, the EA4500 will not change to a new public address. I have check my logs and my IP Address is the same going back to a 03/25/2012. I changed my router back to my old E4200V1 and it changes to a new addresses when the old one expires.
I have cable and am using an sb5101 modem and an wndr3700 v2 router. I have tried changing the router mac address with no luck. Also the ip address is dynamic not static verified by bigpond.how to change my ip address.
When I change my WRT320N routers IP address to use it as an access point only and bring it in the IP range of my ccombined modem/router I'm not able to view the setup page via the new IP address. I have tried to change the IP from the default 192.168.1.1 to 192.168.178.2. After changing and applying the changes I restarted the router and tried to access the router via the new address. This was not possible am I doing something wrong or did I forgot something?
I have a high speed wireless DSL router from my ISP (Telus). I use one port off the router to connect directly to my desktop computer. Another port is connected to a switch to which ethernet cables to three other rooms are connected. My problem is that when I connect my Bell PVR (9242) to the 'switched' ethernet cable, I'm apparently not able to get a dynamic ip address, which the Bell unit requires, and can't connect to the network.can I connect another router, in place of the switch, to deliver dynamic IP addresses to whatever I connect to the ports in the other rooms in my house?
I'm wondering is there a way that i could actually change the IP address of a computer based on its MAC Address that is connected to a network via switch only ? By running some bat file ? I only manage to change a target computer ip,dns,subnet via running the bat file on the physical computer but not through a network with switch.
My IP address was stolen. Someone sent me a file that I was expecting. It had a very misconcieving title. I opened it and it wouldn't work, but I let it slide. A week or two later I found pictures of myself on a forum from a hacker. The file I had opened had been a virus that hacked into my webcam. This creep told me that this had spread to 1000+ people and they all had my IP address. I am so scared! If everyone has my IP address anything could happen. How do I change my IP address without it messing up other settings in my computer and how do I remove this virus from my computer?
Are there any logs maintained in Windows 7 when someone changes his/her ip..I mean if I was previously at 192.168.62.111 and then I change to 192.168.62.110 would it get logged somewhere in my PC??How can I view it??And finally how can I destroy that log or stop this logging feature...
In short, I had the following problem in the past but it solved itself when people physically left the area. Now they are back, the problem is occurring and this time I have as many router settings as I can find to maybe aid in the solution.This is the problem:We have a wireless network where the physical equipment is not available to users and yet, the local network name and password continues to be changed wirelessly FROM say, "ABC network" with network password "ABC secret password" to "Jimmy's Network" and network password "some new string of letters and numbers". (we know who Jimmy is but will not approach him until we learn if this situation is inadvertent on his part or more purposeful, which we doubt as of now)Cisco Lynksys Wireless-N Home Router WRT120N[CODE]
I'd like to register another account in a forum to comment anonymously so I need a different IP address for browsing.I remember that I had been trying this long time before but it was not easy to make it. Using proxy website is useless because the speed is very very slow. Is there any way to painlessly, easily change IP to browse websites?
