Are there any logs maintained in Windows 7 when someone changes his/her ip..I mean if I was previously at 192.168.62.111 and then I change to 192.168.62.110 would it get logged somewhere in my PC??How can I view it??And finally how can I destroy that log or stop this logging feature...
View 1 Replies
I have been having a bit of trouble with networking my two machines to share files and allow printing i have a win 7 laptop and a xp home desktop. I share a net connection via 02 wireless box both systems have wireless i have tried many things
View 8 Replies View RelatedI play a game via gameranger, and i want to change my ip address. the replays for this game retain the ip of each player, so that is how it is traced. I have used various ip changers, however they only work properly when i am the host of the game. How to keep my ip protected 100% of the time, rather then only when i am hosting?
View 1 Replies View RelatedSimply put, a wireless network was set up with a network name and password in a senior community of primarily beginner users. Recently the name and password became changed to that of a community member named, let's say, "Joe". After addressing the router several times to change things back - only to find that the network name reverted to Joe - I changed the router password from admin to a unique pw and I confirmed that Remote Management was off. Next day... it was Joe again
View 3 Replies View RelatedIn short, I had the following problem in the past but it solved itself when people physically left the area. Now they are back, the problem is occurring and this time I have as many router settings as I can find to maybe aid in the solution.This is the problem:We have a wireless network where the physical equipment is not available to users and yet, the local network name and password continues to be changed wirelessly FROM say, "ABC network" with network password "ABC secret password" to "Jimmy's Network" and network password "some new string of letters and numbers". (we know who Jimmy is but will not approach him until we learn if this situation is inadvertent on his part or more purposeful, which we doubt as of now)Cisco Lynksys Wireless-N Home Router WRT120N[CODE]
View 1 Replies View RelatedI found this firmware 2.05WW for DIR 655 rev B1, I couldn't find any change logs or anything on the net about it.
View 3 Replies View Relatedhow to change network type in win 7
View 4 Replies View RelatedI have an existing network with several computers running Vista and XP. My new computer has Windows7. The WIN 7 computer can access the router and the internet. But it is invisible to the rest of the network. It is currently set up as "private network". I think it should be "public network". How / where can I change it ?
View 1 Replies View Relatedreinstalled my windows 7 and it doesn't have the network adapter drivers,so i go and dowloand the drivers i install and it still says no drivers installed, and yes i got the right driver,i tryed everything just cant get it working
View 2 Replies View RelatedI run a certain program in my PC and I need to make its data available to an iPhone app.I would like to broadcast it over WIFI from the laptop.How can I set up a simple wifi network so the iPhone can connect as described?I was thinking of wireless router connected directly to the PC.
View 6 Replies View RelatedThree PC's all Win 7. Networking/Homegroup problem. In Network RV711 can see and access RC710 & Akoya. RC710 can see and access RV711 & Akoya. Akoya can see and access RV711. Akoya can see RV711 but not access RC710. Under Network Akoya can see RC710 but “You do not have permission to access...
In Homegroup. RV711 can see and access RC710 & Akoya. RC710 can see and access RV711 & Akoya. Akoya can see and access RV711. Akoya can see RC710 but not access RC710. Under Homegroup No other homegroup computers are available. In Homegroup the identical password is displayed on each PC. The Akoya is wired, the others are wireless. Summing up the Akoya cannot access the RC710.
I finally was able to connect two of my computers up to share files. The only problem is My Win7 computer can't see the xp computer although the Xp can see the Seven. When I first set it up Explorer showed the name of the Xp but when I clicked on it the dialog said it couldn't find the computer. The Xp name was in all caps and when I checked on the Xp the name was all lower case so I tried to change the name. When I tried, the OK button was grayed out so I went in to So I clicked on More and was able (I thought) to change the name there. I had to reboot and when I did the computer had just appended the DNS entry I had to give to the original lowercase name.
I was finally able to rename the XP computer! I changed the name to NETBOOK all caps like I had originally thought it was. BUT it makes no difference to the Win7 machine it still can't see the XP machine. I did a refresh and the Xp's name NETBOOK showed up But I am still back where I started from because when I click on it a dialog box just says that it can't access ||NETBOOK.
After change my OS to Windows 7 Pro Enterprise my Dell E5430 missing the network controller driver. let me know the right driver to download and install.
View 4 Replies View RelatedI have setup an ad hoc network on windows 7 and I have apache httpd server running.I can connect to the network and access apache index.html page using the ip address from my iPade.g. 169.254.111.111The windows computer name is test-pc and I have a virtual host setup in apache called mytestpc.comWhat do I need to do to access this from my iPad using http://test-pc or http://mytestpc.com
View 1 Replies View RelatedMy laptop suddenly stopped being able to conect to my home wifi router. It stays at "waiting for network to be ready" while at the back the wifi list stays at "acquiring network adress" for a couple of minutes and then resets to regular disconnected status. All my other wireless gadgets at home can connect with no problem whatsoever.Wifi strength is great and, when disabling security, the laptop connects without a hitch and very quickly. I tried all possible security combinations the router can give me, always using a second wifi device to check if connection and browsing was possible.I tried everything I googled: drivers, firmwares, ipconfig reset renew, started and stopped services, to no avail.
View 6 Replies View RelatedI have 2 windows 7 laptops running wireless and a windows xp desktop connected by wire to linksys router. The desktop has no problems accessing the other computers.One laptop has no problem accessing the other computers on the network. The other laptop has trouble with the windows XP machine. It asks for login info, which there is none. I tested with the laptop wired and it seemed to access it normally. Also, it is not consistant. It sometimes works and sometimes doesn't. I have gone through other posts and made sure that password requirement was off
View 2 Replies View RelatedI just installed Win 7 pro 64 bit on a new computer / hard drive. I can connect to my router which is hardwired to a computer running Win XP Pro 32 bit, but I can't figure out how to connect to my printer which is on that same network. I can access the internet, just not the printer - which is connected via Ethernet to the router.Is is possible that because Win7 is 64bit and the other computers on the network are 32 bit running XPpro - that it won't work? I have another XP pro computer that is connected via wireless that accesses the printer just fine.I have a netgear USB adapter on both the WinXP computer and also the Win7.Win7 is foreign to me. I can't find anywhere where I would 'join' the mshome network. It asks me about them joining ME.
View 10 Replies View RelatedMy roommate is running dual boot Windows XP PRO (SP3) and Ubuntu 10.10. I am running Windows XP PRO(SP3). Is there any software, that can run on both OS and can create a home network that will work between XP and Ubuntu. He has Samba installed but I have read that that works on Linux not Windows so he can see me but I can't see him.
View 11 Replies View RelatedWould it work just fine using a desktop with Win 7 64bit hosting the domain for a small home network when there would be 2 dekstops with XP 32bit and a laptop with Win7 32bit?
View 2 Replies View RelatedWe have a small home office with three computers, two new comps with win7 64 and an old comp running Vista32. Up until last week, the two 7's accessed files on the vista machine via a public folder, and everything was peachy, speed-wise. Trashed the vista this week and replaced it with a new desktop running win7 64. I backed up the old comp's files on the new comp, set up the new win7 home network, and everything went to hell. Both of the 'old' win7 machines can access files on the new, but the speeds are unbearable. It takes, literally, over 10 minutes for Accubid to load (accessing files on the new desktop), whereas it was pretty much immediate before. Quickbooks freezes for a minute and a half before it finally connects. A 60mb PDF file takes two minutes to copy. It even hiccups when I save a freakin' Word document. After some research I found that window's new home sharing network kinda sucks, so I turned it off on all machines and mapped network drives. Nothing.turn off remote differential compression, so I turned it off on all machines. Nothing. I disabled flow control on all machines. Nothing.The weirdest thing I did - I disabled auto-tuning and restarted all computers. I then opened Accubid and it opened immediately! I restarted the program 6 or 7 times, and each time it came up within seconds. I was ecstatic. Then my boss came in 5 minutes later and I opened Accubid to show him I finally fixed it. It took 10 minutes to load again, and I haven't been able to repeat whatever I had done since.
My ISP is ATT.
Modem - D-Link DSL 520B
Router - Netgear WNDR3800
Network is wired. Again, access to internet is blazing. Access to the computer 6 feet away from me is not.
I've got a small wireless home network that currently has 2 computers - my desktop is running XP Pro, and a laptop that my wife uses running XP Home. I've recently bought a new laptop that is running Windows 7, and although it picks up the wireless feature of the network (it has wireless internet access), I can't seem to figure out how to get this new Windows 7 laptop to see the other PCs or the printer connected to my desktop. I've tried a couple of the "how-tos" online, but I must be doing something wrong. getting my Windows 7 box to see the other PCs and printer on my network
View 3 Replies View RelatedI have 2 PC at home and would like to network them together so i could share the resources between them. But i could only manage to setup 'one way' - the XP Home could access the Windows 7 Ultimate but not the other way Whenever i double click on the XP Home, it will prompt me to login. But no matter what i enter, it will say its wrong. What weird is the 'domain'. The login dialog will show that im login into 'Domain: Windows7PC' when im trying to login into the XP. And after i have enter 'wrongly', it will show the username as 'Windows7PCusername' and ask to try again - it means im login into the Windows 7 And if i try to prefix the PC's name in front - \WindowsXPusername then it will prompt \WindowsXP is not accessible..... The specified username is invalid
Here is my 'settings'-
Windows 7 Ultimate SP1
Windows XP Home SP3
Both is on the same Workgroup/IPGroup/Netmask
Both has File & Printer Sharing Enabled
Have patch XP with KB922120v6
[code]....
Okay so I had all this set up to be simple back in windows 7.
Basically, what I did was turn off password required sharing or whatever, so all I had to do was click on networks in the left side panel when i was in My Computer and click on say, my wifes laptop and it'd open the public folder she had there, and I could drag and drop stuff into and out of it. And same for her and seeing mine.
Now that I have windows 8 on my PC It's all buggered up.
I didn't change ANY settings on HER laptop, but when I try and access it (I used it to back up important files while fresh installing w8) it's asking me for a username and password
I've got a modem which feeds a wireless router; plugged into the router via ethernet cables are my personal computer in my room and an office computer. Connected wirelessly is my kitchen PC. My printer (Canon MX330) is not wireless/bluetooth and is connected via USB to my office computer.
Office / Kitchen Computers: Windows XP My Personal Computer: Windows 7
I'm trying to set up a network/file sharing system, and more importantly, I'm trying to be able to print on a computer other than my office computer.
I finally got my 2 computers networked and seeing each other but when I try to share a file from comp B to comp A all I get is the data files, no .exe or application files. Can I not run a game stored on another network computer?
View 3 Replies View RelatedI have a home network, hard wired 2 PC's & printer to a Linksys wireless 6 router. I use the wireless capability for WiFI to my two TV's. My son was able to get on the internet without using a password. When I map a network drive I must use ID and Password. I have a firewall. Is my home network vulnerable? My son see "Linksys" as a open wi-fi resource with his MAC, but since he is unable access my network printer
View 1 Replies View RelatedI know nothing about Tablets (iPad or Android) or their operating system. My wife is interested in getting a iPad 2 or Android tablet.
I have a home WiFi network based on two laptops and a desktop. They are all running Windows OS. I also have 3 external drives and two printers USB wired into the main desktop.
I have two questions:
1) Will I be able to integrate an iPad/Android tablet into the Windows home network so as to be able to access the .jpg photographs on the desktop drives?
2) Will the tablet be able to output work to the printer attached to the Windows Desktop?
how to setup a home wifi network with windows 7?I want to access internet of the main laptop (has internet using a dongle)for my other laptop which has no direct internet connection at the moment, but wifi enable.
View 2 Replies View RelatedDoes anyone know of some off the shelf (commercially available) software that will set the DSCP field to something other than 0? Im looking to do some network testing using any off the shelf software, voip, games, whatever. I have already setup a traffic generator but my testing needs to encounter a more real life scenario. I have already tried many games, skype, gchat, etc. but nothing sets the DSCP field to anything other than 0.
View 4 Replies View RelatedI am running a VPN server on my desktop at home, with all the default settings, and i checked the box that allows clients to connect over the internet. this is win7 x64 computer. I opened up port 1723 with PPTP protocol on my E4200 router.On the client i am running win7 x64 as well. I am able to connect to the vpn, from another internet connection, but there is no local network acess. It says the status is No Internet Access. and the IP that is assigned is the 169.x.x.x one that windows defaults when it doesnt find a dhcp server.How can i get the client to connect with full local network access. Right now being connected to the vpn, it means nothing, i have no access other than being "connected".
View 1 Replies View RelatedI want to know which protocols are used to share files via lan.Both the machines are running windows.
View 6 Replies View RelatedI have a network set up with file sharing. I use a Windows 7 PC to host files that are shared with few other PCs - some on Windows 7, some on Windows XP. The file sharing works but sometimes some users are unable to get access to the files. It seems to be only on the machines that are on XP that this problem occurs. The error message is something like \PCNAME is not accessible...
The user can connect if the machine storing the files is restarted but it will happen 4-5 times during the day.
I have a desktop computer and a laptop computer both running Windows 7 Home Premium. The desktop is connected to the router directly and the laptop is connected to the wireless network. When I restart both computers, I can see and access the other computer through the home network without problems. But after a while, sometimes just a few minutes, I can only see the other computer but cannot access it. Sometimes, I cannot even see the other computer. If I do a "ipconfig /release" and a "ipconfig /renew", it may sometimes correct the problem for a while.
I have looked at many related discussions on the web and none of the suggestions work for me.I have the firewalls disabled on both computers, as well as the ipv6 and IP service. I have also disabled the Bonjour service.I have turned a number of services, such as computer browser, server, workstation and many others to automatic as people suggested.
