Max 1mb Transfer Rate On Windows 7 Home Network?

May 11, 2012

We have a small home office with three computers, two new comps with win7 64 and an old comp running Vista32. Up until last week, the two 7's accessed files on the vista machine via a public folder, and everything was peachy, speed-wise. Trashed the vista this week and replaced it with a new desktop running win7 64. I backed up the old comp's files on the new comp, set up the new win7 home network, and everything went to hell. Both of the 'old' win7 machines can access files on the new, but the speeds are unbearable. It takes, literally, over 10 minutes for Accubid to load (accessing files on the new desktop), whereas it was pretty much immediate before. Quickbooks freezes for a minute and a half before it finally connects. A 60mb PDF file takes two minutes to copy. It even hiccups when I save a freakin' Word document. After some research I found that window's new home sharing network kinda sucks, so I turned it off on all machines and mapped network drives. Nothing.turn off remote differential compression, so I turned it off on all machines. Nothing. I disabled flow control on all machines. Nothing.The weirdest thing I did - I disabled auto-tuning and restarted all computers. I then opened Accubid and it opened immediately! I restarted the program 6 or 7 times, and each time it came up within seconds. I was ecstatic. Then my boss came in 5 minutes later and I opened Accubid to show him I finally fixed it. It took 10 minutes to load again, and I haven't been able to repeat whatever I had done since.

My ISP is ATT.
Modem - D-Link DSL 520B
Router - Netgear WNDR3800

Network is wired. Again, access to internet is blazing. Access to the computer 6 feet away from me is not.

View 3 Replies


ADVERTISEMENT

Highest MBs Transfer Rate On A Home LAN?

Oct 23, 2011

How to increase data transfer speed on lan

View 2 Replies View Related

Which Network Provides The Highest Data Transfer Rate

Apr 6, 2012

Which network provides the highest data transfer rate?

View 1 Replies View Related

Home Network To Transfer Files From One Computer To Next

Feb 12, 2012

I love sharing on my home network to transfer files from one computer to the next. However, I will soon have tenants in my house sharing my network ...so they can use my Wi-Fi to get on the internet.I need a solution to give them access to the internet without losing my own network sharing ability.I do not want them accessing my files.I have Windows XP home and a Dlink WBR-2310 router.As I see it, I need to either upgrade to a router with a Guest Zone/Access feature ...OR..upgrade to Windows 7(?) to give myself more networking options (i.e. file sharing where I select the users or set a password). Currently the XP permissions are too general.

View 3 Replies View Related

Home Network :: Software To Transfer Files Over LAN Network?

Jun 8, 2012

I need a software that i can use to transfer files from one windows PC to another over the LAN network.I've tried "Quick'n Easy FTP server Lite" and it works, but its really slow (About 2MB/s) ( i know my hardware can go much faster than the software is allowing). But at least the speeds were constant and unchangingI have also tried Windows Easy Transfer. But that software makes it a bit harder to send back and for whenever i feel like it, and although sometime i would hit speeds 5 times faster than with the previously mentioned software (about 12MB/s) , those speeds were not constant. It would be slow (around 1MB/s) and then spike up, and then go back down, and repeat in that fashion

View 8 Replies View Related

Sharing :: To Increase File Transfer Rate

Feb 17, 2013

I have a couple laptops in my home and just purchased a WD network drive so that a central location can keep all our media files (photos, videos, etc.) and we can access it with our pc's, phones, and tablets. I'm in the process of setting up the HD and transferring all the media to the drive wirelessly however I'm only experiencing about 1.5MB/s-4MB/s. Is there a way to speed this up.

View 2 Replies View Related

Cisco Wireless :: WAP 321 Slow Transfer Rate?

Feb 19, 2013

I have 4 - WAP 321's in an office all connected to a POE gigabit switch.  Each WAP shows connected at 1GB but when I am sitting within a couple feet of the WAP and attempt to transfer a 972MB file it takes around 9 minutes to complete.  speeding this up?  All 4 AP's are setup as a cluster as well.

View 1 Replies View Related

Home Network :: Setting Up A Direct Link Between 2 PCs For File Transfer

Mar 28, 2012

I have been trying to get this setup for 2 days now and so far NADA.....

Router: Linksys E3000 - below is a list of all devices connected (hardwired T568B) to the 4 ports with a laptop connected via wireless

1. Main PC - motherboard: ASUS Maximus IV Extreme-Z (dual GB LAN ports)
2. Media Server - motherboard: MSI Z68A-GD80 (dual GB LAN ports)
3. Test Bench AMD PC
4. WD TV Live

Currently: I have all 3 computers running Windows 7 and connected to a Homegroup. I have given the correct permissions to enable sharing of files between each of the 3 computers and can transfer files from one PC to the next w/o any issues.

Desired: I want to connect my Main PC and Media Sever with a crossover cable using the 2nd LAN port on each motherboard, so that I don't have to go through the router to transfer data to and from these 2 PCs. I will have each PC also connected to the Linksys E3000 router via the 1st LAN port on each motherboard to supply the internet connection, so I am also not trying to "share" an internet connection between these 2 PCs. Basically, I want to run my home network through the Linksys E3000 and then a 2nd network for the 2 PCs using the crossover cable.

Current Problem: I disconnected the straight-through cables from the router to each computer from the 1st LAN port. I then connected the crossover cable from the Main PC to the Media Server and setup a new Home network in the Network and Sharing Center in Windows 7. Everything worked and I could transfer data to and from each these 2 PCs, so i know I wired the crossover cable correctly. Then I reconnected the straight-through cables coming from the router to the 1st LAN ports of each mobo, thinking that each PC would auto-detect the internet connection and reacquire my existing home network, enabling an internet connection again. However, this did not happen.

[URL] I also followed this how-to guide on microsoft.com, but when I get to Step 3 where it says that an "Unidentified network icon" will aprear in the Network and Sharing Center, it does not!

From Googling, reading, and troubleshooting I believe I know 2 things:

1. All of the hardware is functioning properly - when the straight-through cables from the router are disconnected, the 2 PCs are networked through the crossover cable and files can be transferred.

2. The problem is with Windows 7 somewhere - I think?

View 1 Replies View Related

Linksys Wireless Router :: WAG320n Slow Transfer Rate

Dec 27, 2012

I have a home network running on a Linksys WAG320n and i have attached to it a WD MyBookLive (w Gigabit Ethernet). I am connected on the network via my Dell with a Intel(R) WiFi Link 5300 AGN. I am not able though to connect on N range. I have installed the latest drivers from Intel but nothing changed. When i try to copy a file from my computer to the WD Network drive the transfer rates are very slow. I get Max 2MB/s - 3MB/s while if i connect my computer with a wire the speed goes up by 3-4 times more.

View 5 Replies View Related

Cisco Switching/Routing :: Maximum Transfer Rate With 3750G

Apr 18, 2012

I have a computer connected to a Switch3750G and another computer connected to another Switch3750G. Theses switches are connected through a Optical Fiber link in the uplinks of the boths Switchs 3750. The computers are connected in the access ports, this ports works at 1Gbps. My question is Which is the maximum transfer rate that should reach between these two computers.

View 2 Replies View Related

Cisco WAN :: RV110W Connected To ISP Via PPPoE / Data Transfer Rate

Nov 23, 2011

RV110W connected to ISP via PPPoE. MTU is default setting - 1492. IPSs tarif - 100 Mbit/sec IN, 40 Mbit/sec-OUT.When the laptop is connected  to RV110w via ethernet the data transfer rate is 45 Mbit IN / 25 Mbit OUT.When a laptop is connected to ISP directly without a router a data transfer rate is 95 IN / 35 OUT.

View 0 Replies View Related

D-Link 2640B / Transfer Rate Slow On International Server Downloads?

Jul 20, 2011

i have a 4Mbps DSL internet connection with 3 PCs connected through a router. 2 are connected wirelessly and the other is wired via an ethernet cable. i noticed that when downloading a file from an international server, the transfer rate on the wireless PCs is 2-3 times slower than on the wired PC. the wireless PC would get about 150-200kb/s, whereas the wired PC can max out to 450kb/s on a single download. however when i download from a local or nearby server instead, the transfer rate on the wireless and wired PCs are the same and can both reach up to 450kb/s per download. i don't understand why the wireless connection is slower to international servers compared to the wired PC.my wireless signal is at 54Mbps with "excellent" strength. i also tested the ping results from both the wireless and wired PCs to international servers and they are pretty much the same.

- all PCs are running windows XP SP3
- the modem/router is a D-Link 2640B

View 6 Replies View Related

Linksys Wireless Router :: E3200 Slow Transfer Rate To Synology NAS

Jun 20, 2012

I just bought a synology NAS ds212j .  I updated to DSM4.0. I purchased 2 Seagate ST2000DM001 Barracuda 7200RPM 2 TB SATA 6 GB/s NCQ 64 MB Cache 3.5-Inch Internal Bare Drive
 
My e3200 has the latest 1.0.04 firmware I'm backing up via time machine(mac book pro) in MAC 10.7.4 which has a wireless N card.
 
in Utilities (activity monitor)I'm only getting 9 megabytes per second , why is it so slow? I feel like it's taking forever. e3200 says it does up to 300 megabytes per second. any possible settings causing this?
 
a backup of 202 gigs has been running for about 4 hours and still going

View 9 Replies View Related

Cisco Security :: Pix 501 Transfer Rate Data Between Interface Outside And Inside Very Slow

Aug 2, 2012

I'm using Pix 501 with firmware: Version 6.3(3)I have problem with Pix 501:

+ transfer rate data between interface outside and inside very slow, even between 2 interface inside.
+ I have test file transfer between 2 PC connect via interface inside.
+ Results transfer 1 file 1MB with total time 60s
 
I don't upgrade software current from 6.3(3) to 6.3(5) via TFTP. It's error Please see attach file.

View 2 Replies View Related

830 / Dial Up Modem - Update Loading Too Slow Data Transfer Rate?

Dec 11, 2011

So I have a really neat computer sitting here, 2500K, P8z68-v, samsung 830 64gb ssd, corsair vengeance 16gb, deskstar hdd, firepro v5800

I have a non-descript trendnet 56K v.92 dial up modem installed to pci slot1 on my mobo.The phone company says they can't get a quicker connection than 31.2 Kbps established to dial up users in this area.The real issue is the data transfer rate.I have seen it reach as high as 6.xx Kbps but generally hovers around 2.5 Kbps.Now it is down to 1.xx Kbps and I took the last 48 hours downloading all the updates for windows and several other updates for hard ware etc.Now I need the ATI firepro update and 114 Mb will take over 16 hours at my average speed, and some 32 hours at the new slower speed

View 17 Replies View Related

Transfer Files From Vista To Windows 7 On Same Network?

May 24, 2011

here is my setup:Old laptop with all my files is running Windows Vista.New laptop I got is running Windows 7.Both are connected on the same wireless network (same router and modem).I am looking for an easy way to copy and paste several folders and gigs worth of music, movies and photos to the new laptop with Windows 7. Is there a step-by-step guide on how to get these two laptops to recognize each other, and then access the files on Vista to copy and paste into Windows 7?

View 3 Replies View Related

Linksys Wireless Router :: Intel 4965agn Client With E4200 - Good Connection / Transfer Rate?

Jul 30, 2011

Which Intel network cards runs well with E4200 (latest FW)?  I mean good connection and transfers rate.  I have two clients with the same cards (Intel 4965agn, latest driver) and I got transfer rates at 144 Mbps with both radios working (2.4 and 5GHZ on the E4200). When I try to use 5Ghz only it drops to 54 Mbps and for 2.4Ghz it drops for 130 Mbps. Could I reach better transfers rate with a Intel 4965agn card (300 or 450 Mbps)?

View 4 Replies View Related

File Transfer Between XP And Windows 7 On Hard Wire Network

Sep 11, 2012

Old XP and New W7 side by side. Wanting to transfer file, pics, docs, ect. form one to the other. I can see the old XP from the new W7. Through W7 I can get to documents and settings on the old XP, try to open that and says I dont have permission. Old XP c drive shared on network. Still missing something.

View 11 Replies View Related

Home Network :: Windows 7 Laptop To XP Home Desktop Wireless

Mar 13, 2011

I have been having a bit of trouble with networking my two machines to share files and allow printing i have a win 7 laptop and a xp home desktop. I share a net connection via 02 wireless box both systems have wireless i have tried many things

View 8 Replies View Related

Home Network :: Reinstalled Windows 7 - Doesn't Have Network Adapter

Oct 6, 2012

reinstalled my windows 7 and it doesn't have the network adapter drivers,so i go and dowloand the drivers i install and it still says no drivers installed, and yes i got the right driver,i tryed everything just cant get it working

View 2 Replies View Related

Home Network :: Setting Up Wifi Network From Windows Xp Pc?

Jan 28, 2013

I run a certain program in my PC and I need to make its data available to an iPhone app.I would like to broadcast it over WIFI from the laptop.How can I set up a simple wifi network so the iPhone can connect as described?I was thinking of wireless router connected directly to the PC.

View 6 Replies View Related

Home Network :: 3 Windows 7 PCs - PC3 Cannot See / Access PC2

Aug 12, 2011

Three PC's all Win 7. Networking/Homegroup problem. In Network RV711 can see and access RC710 & Akoya. RC710 can see and access RV711 & Akoya. Akoya can see and access RV711. Akoya can see RV711 but not access RC710. Under Network Akoya can see RC710 but “You do not have permission to access...

In Homegroup. RV711 can see and access RC710 & Akoya. RC710 can see and access RV711 & Akoya. Akoya can see and access RV711. Akoya can see RC710 but not access RC710. Under Homegroup No other homegroup computers are available. In Homegroup the identical password is displayed on each PC. The Akoya is wired, the others are wireless. Summing up the Akoya cannot access the RC710.

View 5 Replies View Related

Home Network :: Windows 7 Can't See XP Computer

Mar 20, 2013

I finally was able to connect two of my computers up to share files. The only problem is My Win7 computer can't see the xp computer although the Xp can see the Seven. When I first set it up Explorer showed the name of the Xp but when I clicked on it the dialog said it couldn't find the computer. The Xp name was in all caps and when I checked on the Xp the name was all lower case so I tried to change the name. When I tried, the OK button was grayed out so I went in to So I clicked on More and was able (I thought) to change the name there. I had to reboot and when I did the computer had just appended the DNS entry I had to give to the original lowercase name.

I was finally able to rename the XP computer! I changed the name to NETBOOK all caps like I had originally thought it was. BUT it makes no difference to the Win7 machine it still can't see the XP machine. I did a refresh and the Xp's name NETBOOK showed up But I am still back where I started from because when I click on it a dialog box just says that it can't access ||NETBOOK.

View 7 Replies View Related

Home Network :: Windows 7 Ad Hoc Network Using Hostname?

Apr 28, 2012

I have setup an ad hoc network on windows 7 and I have apache httpd server running.I can connect to the network and access apache index.html page using the ip address from my iPade.g. 169.254.111.111The windows computer name is test-pc and I have a virtual host setup in apache called mytestpc.comWhat do I need to do to access this from my iPad using http://test-pc or http://mytestpc.com

View 1 Replies View Related

Home Network :: Windows XP Cannot Connect To Secure WAP

Feb 28, 2012

My laptop suddenly stopped being able to conect to my home wifi router. It stays at "waiting for network to be ready" while at the back the wifi list stays at "acquiring network adress" for a couple of minutes and then resets to regular disconnected status. All my other wireless gadgets at home can connect with no problem whatsoever.Wifi strength is great and, when disabling security, the laptop connects without a hitch and very quickly. I tried all possible security combinations the router can give me, always using a second wifi device to check if connection and browsing was possible.I tried everything I googled: drivers, firmwares, ipconfig reset renew, started and stopped services, to no avail.

View 6 Replies View Related

Home Network :: Windows 7 Ip Change Logs

Apr 8, 2012

Are there any logs maintained in Windows 7 when someone changes his/her ip..I mean if I was previously at 192.168.62.111 and then I change to 192.168.62.110 would it get logged somewhere in my PC??How can I view it??And finally how can I destroy that log or stop this logging feature...

View 1 Replies View Related

Home Network :: Windows 7 Asking For Password On XP Machine?

Oct 9, 2012

I have 2 windows 7 laptops running wireless and a windows xp desktop connected by wire to linksys router. The desktop has no problems accessing the other computers.One laptop has no problem accessing the other computers on the network. The other laptop has trouble with the windows XP machine. It asks for login info, which there is none. I tested with the laptop wired and it seemed to access it normally. Also, it is not consistant. It sometimes works and sometimes doesn't. I have gone through other posts and made sure that password requirement was off

View 2 Replies View Related

Windows 7 64 Bit Can't Connect To Home Network Printer?

Apr 5, 2011

I just installed Win 7 pro 64 bit on a new computer / hard drive. I can connect to my router which is hardwired to a computer running Win XP Pro 32 bit, but I can't figure out how to connect to my printer which is on that same network. I can access the internet, just not the printer - which is connected via Ethernet to the router.Is is possible that because Win7 is 64bit and the other computers on the network are 32 bit running XPpro - that it won't work? I have another XP pro computer that is connected via wireless that accesses the printer just fine.I have a netgear USB adapter on both the WinXP computer and also the Win7.Win7 is foreign to me. I can't find anywhere where I would 'join' the mshome network. It asks me about them joining ME.

View 10 Replies View Related

Ubuntu / Windows Home Network Not Working

Mar 19, 2011

My roommate is running dual boot Windows XP PRO (SP3) and Ubuntu 10.10. I am running Windows XP PRO(SP3). Is there any software, that can run on both OS and can create a home network that will work between XP and Ubuntu. He has Samba installed but I have read that that works on Linux not Windows so he can see me but I can't see him.

View 11 Replies View Related

Home Network With Windows 7 32bit And 64bit?

Dec 20, 2012

Would it work just fine using a desktop with Win 7 64bit hosting the domain for a small home network when there would be 2 dekstops with XP 32bit and a laptop with Win7 32bit?

View 2 Replies View Related

How To Get Windows 7 Box To Recognize Home Network PCs And Printer

May 6, 2011

I've got a small wireless home network that currently has 2 computers - my desktop is running XP Pro, and a laptop that my wife uses running XP Home. I've recently bought a new laptop that is running Windows 7, and although it picks up the wireless feature of the network (it has wireless internet access), I can't seem to figure out how to get this new Windows 7 laptop to see the other PCs or the printer connected to my desktop. I've tried a couple of the "how-tos" online, but I must be doing something wrong. getting my Windows 7 box to see the other PCs and printer on my network

View 3 Replies View Related

Can't Network Windows 7 With XP Home - Login Error

Sep 3, 2011

I have 2 PC at home and would like to network them together so i could share the resources between them. But i could only manage to setup 'one way' - the XP Home could access the Windows 7 Ultimate but not the other way Whenever i double click on the XP Home, it will prompt me to login. But no matter what i enter, it will say its wrong. What weird is the 'domain'. The login dialog will show that im login into 'Domain: Windows7PC' when im trying to login into the XP. And after i have enter 'wrongly', it will show the username as 'Windows7PCusername' and ask to try again - it means im login into the Windows 7 And if i try to prefix the PC's name in front - \WindowsXPusername then it will prompt \WindowsXP is not accessible..... The specified username is invalid

Here is my 'settings'-

Windows 7 Ultimate SP1
Windows XP Home SP3
Both is on the same Workgroup/IPGroup/Netmask
Both has File & Printer Sharing Enabled
Have patch XP with KB922120v6

[code]....

View 14 Replies View Related

Sharing Files Over Home Network With Windows 8?

Nov 6, 2012

Okay so I had all this set up to be simple back in windows 7.

Basically, what I did was turn off password required sharing or whatever, so all I had to do was click on networks in the left side panel when i was in My Computer and click on say, my wifes laptop and it'd open the public folder she had there, and I could drag and drop stuff into and out of it. And same for her and seeing mine.

Now that I have windows 8 on my PC It's all buggered up.

I didn't change ANY settings on HER laptop, but when I try and access it (I used it to back up important files while fresh installing w8) it's asking me for a username and password

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved