D-Link 2640B / Transfer Rate Slow On International Server Downloads?
Jul 20, 2011
i have a 4Mbps DSL internet connection with 3 PCs connected through a router. 2 are connected wirelessly and the other is wired via an ethernet cable. i noticed that when downloading a file from an international server, the transfer rate on the wireless PCs is 2-3 times slower than on the wired PC. the wireless PC would get about 150-200kb/s, whereas the wired PC can max out to 450kb/s on a single download. however when i download from a local or nearby server instead, the transfer rate on the wireless and wired PCs are the same and can both reach up to 450kb/s per download. i don't understand why the wireless connection is slower to international servers compared to the wired PC.my wireless signal is at 54Mbps with "excellent" strength. i also tested the ping results from both the wireless and wired PCs to international servers and they are pretty much the same.
- all PCs are running windows XP SP3
- the modem/router is a D-Link 2640B
View 6 Replies
ADVERTISEMENT
Jul 12, 2011
I am on a 4Mbps internet line.i have 3 PCs connected to the internet through a router. i noticed that direct downloads on the 2 PCs that are connected to the router wirelessly are capped at about 50-60kbps/sec per download. just to clarify, i can still achieve a full speed of 400kbps in total, but just that each download is capped at 50-60kbps.however, on the PC that is connected directly to the router via ethernet cable i am able to download well over 150kbps per download.so i don't think it's my ISP that is capping my downloads here, but i can't figure out why downloads would be capped on the wireless PCs. is it some settings on my router? i have everything pretty much set on default. the modem is a D-Link 2640B.
View 10 Replies
View Related
Feb 19, 2013
I have 4 - WAP 321's in an office all connected to a POE gigabit switch. Each WAP shows connected at 1GB but when I am sitting within a couple feet of the WAP and attempt to transfer a 972MB file it takes around 9 minutes to complete. speeding this up? All 4 AP's are setup as a cluster as well.
View 1 Replies
View Related
Dec 27, 2012
I have a home network running on a Linksys WAG320n and i have attached to it a WD MyBookLive (w Gigabit Ethernet). I am connected on the network via my Dell with a Intel(R) WiFi Link 5300 AGN. I am not able though to connect on N range. I have installed the latest drivers from Intel but nothing changed. When i try to copy a file from my computer to the WD Network drive the transfer rates are very slow. I get Max 2MB/s - 3MB/s while if i connect my computer with a wire the speed goes up by 3-4 times more.
View 5 Replies
View Related
Jun 20, 2012
I just bought a synology NAS ds212j . I updated to DSM4.0. I purchased 2 Seagate ST2000DM001 Barracuda 7200RPM 2 TB SATA 6 GB/s NCQ 64 MB Cache 3.5-Inch Internal Bare Drive
My e3200 has the latest 1.0.04 firmware I'm backing up via time machine(mac book pro) in MAC 10.7.4 which has a wireless N card.
in Utilities (activity monitor)I'm only getting 9 megabytes per second , why is it so slow? I feel like it's taking forever. e3200 says it does up to 300 megabytes per second. any possible settings causing this?
a backup of 202 gigs has been running for about 4 hours and still going
View 9 Replies
View Related
Aug 2, 2012
I'm using Pix 501 with firmware: Version 6.3(3)I have problem with Pix 501:
+ transfer rate data between interface outside and inside very slow, even between 2 interface inside.
+ I have test file transfer between 2 PC connect via interface inside.
+ Results transfer 1 file 1MB with total time 60s
I don't upgrade software current from 6.3(3) to 6.3(5) via TFTP. It's error Please see attach file.
View 2 Replies
View Related
Dec 11, 2011
So I have a really neat computer sitting here, 2500K, P8z68-v, samsung 830 64gb ssd, corsair vengeance 16gb, deskstar hdd, firepro v5800
I have a non-descript trendnet 56K v.92 dial up modem installed to pci slot1 on my mobo.The phone company says they can't get a quicker connection than 31.2 Kbps established to dial up users in this area.The real issue is the data transfer rate.I have seen it reach as high as 6.xx Kbps but generally hovers around 2.5 Kbps.Now it is down to 1.xx Kbps and I took the last 48 hours downloading all the updates for windows and several other updates for hard ware etc.Now I need the ATI firepro update and 114 Mb will take over 16 hours at my average speed, and some 32 hours at the new slower speed
View 17 Replies
View Related
Jul 30, 2011
I ran a speed test with my new DIR-655 connected to my PS3 and my download is 768kbps and my upload is 1.5mbps. However, my internet connection is 50mbps and 2mbps upload on my computer connected via LAN. While I understand SOME decrease, that's slower than the previous Wireless G router that I had.
I've reset the router twice and it's currently set to the factory defaults. I've even tried setting a static ip address for the PS3 and put it into DMZ mode. However, I'm still getting the slow speeds.
Also, my iPhone 4 is getting about 14mbps download and 2mbps upload. Is that expected?
View 4 Replies
View Related
May 14, 2013
On certain downloads, Wifi speed seems to be throttled to about 100kB/s. I see this mostly on two BlackBerry Z10s, but also just saw it on my Wifi-connected PC when trying to download the latest DIR-655 firmware. The Z10s are screaming fast on Wifi at my work. They also do fine on YouTube and any other high bandwidth applications (I just tried Speedtest and got 11Mb/s). I think I can say that the slow speed is only when I'm downloading apps or updates on the phones.
I just updated my DIR-655 to the latest FW and have spent an hour flicking settings trying to find something that makes a difference. No luck. As it stands now, I'm downloading the latest OS upgrade to BB10 (345MB) at 100kB/s.
View 1 Replies
View Related
Jul 20, 2011
i have a 4Mbps DSL internet connection with 3 PCs connected through a router. 2 are connected wirelessly and the other is wired via an ethernet cable.i noticed that when downloading a file from an international server, the transfer rate on the wireless PCs is 2-3 times slower than on the wired PC. the wireless PC would get about 150-200kb/s, whereas the wired PC can max out to 450kb/s on a single download.however when i download from a local or nearby server instead, the transfer rate on the wireless and wired PCs are the same and can both reach up to 450kb/s per download.i don't understand why the wireless connection is slower to international servers compared to the wired PC. don't they all go through the same router? or am i missing something?my wireless signal is at 54Mbps with "excellent" strength. i also tested the ping results from both the wireless and wired PCs to international servers and they are pretty much the same. there doesn't seem to be any extra latency all PCs are running windows XP SP3- the modem/router is a D-Link 2640B
View 2 Replies
View Related
Oct 4, 2012
[code] Wireless transfer from HTPC to Windows Home Server peak at 8-9 MB/sec. Note that my WHS and my Winn7 Gaming rig are both on the same physical switch, but the same exact wireless file transfer from my HTPC to Windows 7 gaming rig hits consistent 35-40 MB/sec, 4x faster and which is what I expect. Wired transfer of same 4GB test file directly from gaming rig to WHS tops over 100MB/sec so it is not a problem with the WHS writing to disk or wiring. So the question is, what could possibly be bottle-necking my upload from HTPC only to the Home Server? I have tested a Netgear R6300 with the same results as the Asus router.
View 1 Replies
View Related
Dec 16, 2011
i'm overal content with the router. But i bought myself an ipad and an app to go with it,what it does it, you access your computer from your laptop. You can than transfer files onto the ipad.But the max speed while transfering is 4150kbps, kinda slow imo.
View 2 Replies
View Related
Dec 25, 2011
I am using a DIR 825 and I experience slow data transfer speed within my internal network under the wireless connection (2.4 Ghz), 2 Mbs. I can videostream from the internet OK, no problems there, but when I want to transfer data between two external HDD (NAS devices) it can get as slow as 2 Mbs.
View 1 Replies
View Related
Jan 22, 2012
Transfering from PC to Laptop. This just seems slow. I'm wired to the PC and wireless to the laptop. With a A3 on 1.21 FW
View 4 Replies
View Related
Oct 23, 2012
im experiencing very slow transfer rates averaging 600 kb/s when transfering files. my PC has a compatible dwa-552 card and both the router and card have latest drivers / firmware. i have various changes on the router and to no avail. all devices PC / laptops running N @ 20 mhz / channel 11. i can see 2 other networks but very low signal using diff channels.what setting might i be overlooking in the router that might cause this slow trans rate? incidentally, when i transfer .jpg or .pdf files the transfer improves to 2.5 mb/s. however, when i transfer a folder containing subfolders with diff file types the trans rate drops sharply to 600 kb/s.
View 14 Replies
View Related
Dec 4, 2011
I recently bought a new TP-Link TL-WR741N, I'm transferring data from my desktop wired network, windows 7 to net book windows xp wireless. i'm getting only 2 mbps.
View 3 Replies
View Related
Jun 27, 2011
I recently switched from an older 10/100 linksys to this gigabit router from D-Link. However, when I try to transfer files from one computer to another on the LAN, the file transfers are ridiculously low, right around 16KB/s. I have CAT6 cable for all connections, but am baffled by what could cause such a slow speed. I'm trying to transfer files from my desktop (win7) to my server (Windows Home Server 2011).
View 3 Replies
View Related
Feb 23, 2012
1 newer build computer connected to D-link 655 via Cat6.1 laptop computer connected to same D-link 655 via Wireless N minicard. (Intel) (130Mbps connected) Router on a 10 foot shelf, always have full bar in wireless strength on 2nd computer.
Both computers can upload and download as expected from the internet. Transfers between the two computers though are slow. Both computers are loaded with Windows 7. Transferring files to or from the laptop transfers at 1.5MB/sec to 2 MB/sec.
View 1 Replies
View Related
Aug 30, 2011
I have a D-Link DSL 2640B on the way which I plan on using to replace my 2Wire modem. The 2640B is a combination of a modem/wireless device. Does it dynamically load balances the internet connection? Sometimes while I'm playing online games on my PC and a few others are using the internet for browsing or Youtube, I lag A LOT. Latency shoots up from 10 to 200. QoS goes to ****. And I only need 0.50-1Mbps to keep a steady online play. This was the problem with my 2Wire. So does the 2640B load balance the bandwidth?our max speed is 3.5Mbps according to the ATT Rep.
View 10 Replies
View Related
Oct 23, 2011
How to increase data transfer speed on lan
View 2 Replies
View Related
Nov 16, 2012
wr2543ND / very slow shared storage transfer speeds?
View 4 Replies
View Related
Feb 17, 2013
I have a couple laptops in my home and just purchased a WD network drive so that a central location can keep all our media files (photos, videos, etc.) and we can access it with our pc's, phones, and tablets. I'm in the process of setting up the HD and transferring all the media to the drive wirelessly however I'm only experiencing about 1.5MB/s-4MB/s. Is there a way to speed this up.
View 2 Replies
View Related
May 11, 2012
We have a small home office with three computers, two new comps with win7 64 and an old comp running Vista32. Up until last week, the two 7's accessed files on the vista machine via a public folder, and everything was peachy, speed-wise. Trashed the vista this week and replaced it with a new desktop running win7 64. I backed up the old comp's files on the new comp, set up the new win7 home network, and everything went to hell. Both of the 'old' win7 machines can access files on the new, but the speeds are unbearable. It takes, literally, over 10 minutes for Accubid to load (accessing files on the new desktop), whereas it was pretty much immediate before. Quickbooks freezes for a minute and a half before it finally connects. A 60mb PDF file takes two minutes to copy. It even hiccups when I save a freakin' Word document. After some research I found that window's new home sharing network kinda sucks, so I turned it off on all machines and mapped network drives. Nothing.turn off remote differential compression, so I turned it off on all machines. Nothing. I disabled flow control on all machines. Nothing.The weirdest thing I did - I disabled auto-tuning and restarted all computers. I then opened Accubid and it opened immediately! I restarted the program 6 or 7 times, and each time it came up within seconds. I was ecstatic. Then my boss came in 5 minutes later and I opened Accubid to show him I finally fixed it. It took 10 minutes to load again, and I haven't been able to repeat whatever I had done since.
My ISP is ATT.
Modem - D-Link DSL 520B
Router - Netgear WNDR3800
Network is wired. Again, access to internet is blazing. Access to the computer 6 feet away from me is not.
View 3 Replies
View Related
Apr 6, 2012
Which network provides the highest data transfer rate?
View 1 Replies
View Related
Feb 14, 2013
Until yesterday my various equipment was networking to each other and the internet without a problem. After i reset my d-link DSL-2640B router (would this initiate an update?) my x-box would not connect to the internet, There is no problem connecting to the router and the home network. Everything is talking to each other and everything else is connected to the internet including the TV. The router must just be blocking the x-box and only from yesterday. I checked ports that are talked about and i think i set up port triggering, but then noticed the firewall is disabled anyway.
View 10 Replies
View Related
Apr 18, 2012
I have a computer connected to a Switch3750G and another computer connected to another Switch3750G. Theses switches are connected through a Optical Fiber link in the uplinks of the boths Switchs 3750. The computers are connected in the access ports, this ports works at 1Gbps. My question is Which is the maximum transfer rate that should reach between these two computers.
View 2 Replies
View Related
Nov 23, 2011
RV110W connected to ISP via PPPoE. MTU is default setting - 1492. IPSs tarif - 100 Mbit/sec IN, 40 Mbit/sec-OUT.When the laptop is connected to RV110w via ethernet the data transfer rate is 45 Mbit IN / 25 Mbit OUT.When a laptop is connected to ISP directly without a router a data transfer rate is 95 IN / 35 OUT.
View 0 Replies
View Related
May 13, 2013
Region : Germany
Model : TL-MR3020
Hardware Version : V1
when visiting Switzerland and Italy with my German SIM card I noticed that roaming is not working very good with the TL-MR3020. The reason is that the internet provider needs to be set in the config, in my case to o2 Germany.When I travel with this SIM card to another country, I roam into other networks.As I cannot what provider is currently active (as o2 has contracts with almost every provider outside Germany) and even if I could see it I have to adjust the settings in the config if anything changes, the satisfaction effect on this trip was not very good.
Also I noticed that sometimes (only sometimes) the setting resetted itself to o2 Germany when unplugging the device, this added some extra negative satisfaction to everything.In my understanding the router should have an auto detection for the currently active network and auto setup for the dialin parameters and everything else. Like every smartphone on the planet. Maybe you can also add a setting where you can enable or disable data roaming to save people money if they do not have a international data option booked.
View 2 Replies
View Related
Dec 28, 2012
I used to get speeds that exceeded 2 mb/s and now when i download steam games it fluctuates from 0 kb/s to 2.1 mb/s in an oscillating pattern. What is wrong with my internet? games that should take less than an hour to install now take 3.
View 2 Replies
View Related
Jan 25, 2011
i recently done a clean install of windows xp on this laptop after having vista on there for a couple of years and ever since doing this the download speeds have seemed so much slower im not sure weather its got to do with the OS or weather its just the internet has been slow since ive installed it. Im using wireless connection to connect to my router also.
View 2 Replies
View Related
Jul 30, 2011
Which Intel network cards runs well with E4200 (latest FW)? I mean good connection and transfers rate. I have two clients with the same cards (Intel 4965agn, latest driver) and I got transfer rates at 144 Mbps with both radios working (2.4 and 5GHZ on the E4200). When I try to use 5Ghz only it drops to 54 Mbps and for 2.4Ghz it drops for 130 Mbps. Could I reach better transfers rate with a Intel 4965agn card (300 or 450 Mbps)?
View 4 Replies
View Related
Jun 7, 2012
I just built a new computer with most of the bells and whistles. Asus P8Z77-V pro motherboard, Intel I7 3770K CPU, NVIDIA GTX 560TI, SSD for my boot drive, HDD for storage both running on SATA III, 16 GB of RAMMy problem is that when I connect to the internet via an ethernet cord, my download speeds are about 58 MBPS which is fine but upload speeds are only about .3 mbps. I have changed cables 3 times and connected directly to the modem rather than the router which would indicate an ISP issue. The kicker is that when I disable the LAN network and enable my wireless network, I get slower download speeds as expected but my upload speeds are closer to 5 MBPS, more than 10X times faster which throws my ISP theory out the window a bit.
View 1 Replies
View Related
Nov 26, 2011
the download speed of my downloads has been very slow, and most of the RAR files I download get RAR CRC errors like theseMy desktop has no active firewall on, and is clean from Maleware.What could be the problem with so many bad CRC files being downloaded?
View 1 Replies
View Related
