How To Change Network Type In Windows 7

Can't Change Network Type?

Jul 23, 2012

(my connection is a wired cable/DSL modem btw, using a second temp connection to troubleshoot)Last night, my connection was all fine and dandy until I got up this morning. Instead of having access to it and it being set as a home network, it was set to unidentified and public and I now have no internet access on the network. I can't change the network type either, it's stuck as public.[CODE]

View 1 Replies View Related

How To Change NAT Type On Westell A90-750018-07

May 18, 2011

I have all the PS3 and Activision ports. What numbers go where in the router's port forwarding screen. My ISP says that the PortStart and Base Host Port should be the same numbers and the PortEnd should be the number at the end of the range (10070-10080 for ps3). I'm going with that for the PS3 TCP numbers, but don't know which numbers to put in for the PS3 UDP or the Activision TCP and UDP.

View 8 Replies View Related

Security / Firewalls :: Possible To Change Nat Type

May 22, 2012

can i change my nat type from type 3 to type 1

View 19 Replies View Related

Linksys Wired Router :: WRT120n - PS3 Nat Type 3 Can't Change

Jan 8, 2011

have listed all ports udp and tcp i have disabled UPnP i have changed mtu to 1364 and tried 1365. i have rebooted both router and modem. still no success. Cant seem to change nat type 3 to nat type 2. i am use a WRT120n wireless router

View 1 Replies View Related

Linksys Wireless Router :: Change Nat Type To Open For Ps3?

Jan 28, 2012

changing my nat type to open i have tryed so many solutions and none of them worked?

View 9 Replies View Related

Linksys Wireless Router :: E3000 NAT Type Change For PS3?

Sep 29, 2011

I dont know or understand how to change my nat type. I have the e3000 linksys router. My ps3 is running wireless off it. I want to change form nat 3 to 2

View 1 Replies View Related

Linksys Wireless Router :: Change NAT Type To Open For WRT150N?

Jan 6, 2012

Changing the NAT Type to open because I can't play with some of my friends on Playstation.

View 1 Replies View Related

Linksys Wireless Router :: Change NAT Type To Open On E2000?

Jul 15, 2010

how to change my nat from moderate to open so i can play xbox without any problems. But the weird thing is my nat used to be open but it changed to moderate and i have recently bought the linksys e2000 and it was open at first but not anymore.

View 9 Replies View Related

D-Link DAP-1522 :: Can't Change LAN Connection Type After Updating Firmware

Mar 27, 2012

I have my dap-1522 connected to my dir-655 in bridge mode. I was having intermitant connection problems with the dap-1522, so I updated the firmware to 1.41 for version A1. Now when I go to change the connection type to dynamic ip and save, it reverts back to static ip, which makes this thing useless for my network. Why won't it save?

View 6 Replies View Related

Linksys Wireless Router :: Cisco E4200 - Change NAT Type 3 To 2 Or 1?

Feb 2, 2012

Changing the NAT Type 3 to NAT Yupe 2 or 1 because I can't play with some of my friends on Playstation3

my router is: Cisco E4200

View 8 Replies View Related

Linksys Wireless Router :: Change NAT Type To Open On PS3 With Cisco DDR2200?

Sep 20, 2012

Recently Ive been having issues with connecting to games on my PS3, Ive been trying to do things like Port Forwarding like I did on my old router but the way this router is set up is extremely different. On this router it seems there is no Port Forwarding it's now Port Triggering and it seems to require more info than Forwarding does.I should mention Im using a Router from Centurylink and I have no Admin powers, I can still go in and do things with ports but how I would change my NAT type or Port Trigger

View 1 Replies View Related

Linksys Wireless Router :: WRT120N - Change NAT Type To Open From Strict

Nov 17, 2011

I'm trying to change my NAT type on my PS3 from strict to open. My router is a WRT120N and I'm using cable internet

View 4 Replies View Related

Linksys Wireless Router :: WRT120N - Change NAT Type To Open From Strict?

Jan 30, 2012

I'm trying to change my NAT type on my PS3 from strict to open. My router is a WRT120N and I'm using cable internet. it down so I can understand what you're saying.

View 2 Replies View Related

Linksys Wireless Router :: E2000 DMZ And Port Forwarding To Change NAT Type

Jul 31, 2011

So currently I'm having issues with changing my nat type to open for my ps3. I've tried to use DMZ and port forwarding to change the nat type, but sadly I couldn't get this to work. Most the guides on the forums are for xbox's which wouldn't work for a ps3. Any handy guide to change my nat type to open for my ps3?

View 5 Replies View Related

Cisco Firewall :: ASA 5550 Switch - Change Media Type Command On Interface

Oct 12, 2011

I am switching a switch connecting to the ASA5550 tomorrow. My current switch is using fiber connecting to the ASA. The new one only support copper. If I switch between fiber to copper on the ASA (change media-type command on interface) will it cause a down time? I have VPN tunnel on the ASA and don't want the session to reset.

View 2 Replies View Related

Belkin Routers :: Change NAT Type From Moderate To Open For Xbox 360 N450 Dual Band?

Dec 31, 2012

How to change my NAT type from moderate to open for xbox 360. Belkin n450 dual band

View 1 Replies View Related

Home Network :: Windows 7 Ip Change Logs

Apr 8, 2012

Are there any logs maintained in Windows 7 when someone changes his/her ip..I mean if I was previously at 192.168.62.111 and then I change to 192.168.62.110 would it get logged somewhere in my PC??How can I view it??And finally how can I destroy that log or stop this logging feature...

View 1 Replies View Related

How To Change Windows 7 From Private To Public Network

Jul 25, 2011

I have an existing network with several computers running Vista and XP. My new computer has Windows7. The WIN 7 computer can access the router and the internet. But it is invisible to the rest of the network. It is currently set up as "private network". I think it should be "public network". How / where can I change it ?

View 1 Replies View Related

Dell :: After Change OS To Windows 7 Pro Enterprise E5430 Missing Network Controller Driver

Jun 11, 2013

After change my OS to Windows 7 Pro Enterprise my Dell E5430 missing the network controller driver. let me know the right driver to download and install.

View 4 Replies View Related

Cisco WAN :: How To Convert From LSA Type 5 To Type 3 And Reverse

Nov 28, 2012

I have some LSA type 5, I want to change it from type 5 to type 3 before send to another Area, How can i do it?

View 1 Replies View Related

Samsung Led Smart Tv Does Not Have A Wireless Network Type?

Feb 2, 2013

My Sasung led smart tv does not have a wireless network option in the settings

View 1 Replies View Related

Cisco :: When Below SNMP Trap Type Triggers From Network Devices

Dec 7, 2012

We are implementing fault management tool and for that we need information such as what type of traps are being triggered by router on what events..currently we have BGP, interface,reachability,h/w,syslog,authfail,config, trap types configured..All these are hitting in our fm tool but I need to know when these traps are being triggered by router.more importantly authfail, config, syslog, bgp.

View 4 Replies View Related

HP Deskjet 3050 - Router Recognizes Network Printer But No Details About Type?

Jul 30, 2011

Looking to set up a wireless printer (HP Deskjet 3050 All-in-One Printer - J610a) for use by another computer on the network; at present the printer is wirelessly connected to the router (Linksys e1000) and the software is installed on one computer (Win 7). The router recognizes a Network printer but no details about type.

The printer works correctly with the Win 7 machine but can't be found by the other machine (Win xp). Could it possibly be that I need to install the same software on the Win xp computer in order for it to be connected? Just guessing here as that was the case with another printer I networked but it was a Canon brand.

View 4 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.3 - 11033 Selected Service Type Is Not Network Access

Apr 15, 2013

I have some older devices on the network that only support RADIUS (not TACACS) for authentication and would like to have them use SecureACS 5.3

I understand that by default, ACS only supports TACACS for device administration. So I'll get this error when trying RADIUS:

11033 Selected Service type is not Network Access

Description:

RADIUS requests can only be processed by Access Services that are of type Network Access

Resolution Text: Verify that the Service Selection Policy rules are correct

However, even after adjusting the Service Selection rules and seeing hits, I still see the same message in the logs, as if it has no affect.

View 1 Replies View Related

Cisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2

Jul 5, 2012

I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?

View 2 Replies View Related

How To Change Wep Key In Windows 7

Oct 30, 2011

I am unable to find the location where to change my WEP key in Windows 7. I have searched and searched and I have typed "Manage Wireless Networks" into the start button search area and when I click on that it will tell me that wireless is not currently enabled. How can I change the WEP on this 32 bit machine?

View 8 Replies View Related