I have my dap-1522 connected to my dir-655 in bridge mode. I was having intermitant connection problems with the dap-1522, so I updated the firmware to 1.41 for version A1. Now when I go to change the connection type to dynamic ip and save, it reverts back to static ip, which makes this thing useless for my network. Why won't it save?
View 6 RepliesI tried updating my firmware of my DIR-655 from 1.34NA to 1.35NA (Hardware Version: A1/A2).
However, I found something strange while updating the firmware, that made me stop, in order to ask the question.
Previously, when I did an update, I would browse for the location, and put it in, and it would allow me to update from that location.
Now, it will allow it, but when I select to update from the desktop (C:usersderickdesktop),
it comes up with another location (C:fakepath) for the .bin file.
How do I check to see if my firmware needs updating? I want to connect it to a motorola 2210-02.
View 4 Replies View Relatedi have an DIR-655 Hardware Version: A4, with Firmware Version: 1.21.Its dated: 2008/11/13.Do i get any improvement updating? And in such case, which FW should i use? It must be rock solid!
View 3 Replies View Relateda friend of mine(from the US) gave me this router. i am currently living here in the Philippines. and as I check my router's homepage, it gives me
Product Page: DIR-655
Hardware Version: A3
Firmware Version: 1.21
when I go to tools>firmware and check for the latest version, I get
Current Firmware Version : 1.21
Current Firmware Date : 2008/10/09
This firmware is the latest version.
I don't experience problems using this firmware but I think it's outdated because most of the users in the forum uses new firmwares.
where can I download firmware that is suitable for my router?? and is it risky?
should i download from the D-Link Philippines website? (the router was not bought here)[URL] or North America Firmwares should work fine on my router?
I updated my firmware to the latest update a and then restored My personnel setting and now I can not access my ftp, I checked my IP address to make sure it didn't change , setting looks like did before update I went from firmware 121 to 135, was there new setting that I have to change to get it to work. I get no log in screen I get Windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access the folder?
Details:A connection with the server could not be established
My DIR-655 stopped working after updating firmware to 3.35. Only power light comes on. port4 flashes for a microsecond when I plug it in. Recovery mode has not done anything. Computer acts like nothing is connected through Ethernet, says "No Cable Connected." Only power light stays on the whole time. I am guessing this thing is broken now. when i go through ipconfig, "no media connected." If not whats a good router under a hundred bucks today, had this router since early 2007.
View 10 Replies View RelatedI recently updated my firmware for a DIR-601 router and have internet while hardwired, but no wireless. I saved the configuration settings before updating, but this doesn't even matter because my wireless router doesn't even show up in the list of available wireless network connections. Why isn't my router showing up? I tried a few things like unplugging it and resetting it, but nothing seems to work.
View 3 Replies View RelatedFew days ago, I updated the firmware of my router to 1.35NA and everything seemed to be working fine at first. After a while though, I noticed my Nexus One phone wasn't getting internet through WiFi anymore. It is connected to WiFi still, and it can ping the other devices on the network but it won't connect to the web. I have a Xoom tablet connected to WiFi as well and it is getting access to the web, though it seems to drop web access from time to time too, even before the firmware update. My phone always had a connection to the web through WiFi before the update. The two PCs that have a wired connection work fine. In the router logs, I also noticed that "UPnP renew entry 255.255.255.255 <-> ... UDP timeout:0 'Teredo'" being spammed over and over since the update, which I read has something to do with IPv6?
View 14 Replies View RelatedFor some reasons, my internet connection keeps dropping more often recently. My laptop still says it is connected to my network but I can just not have internet connection. It was not like that before but it happened more frequently now. What I did was to power off then on the modem and the router and everything will work fine again. I want to upgrade my firmware but I just wonder if I need to save all the configuration before doing the upgrading? If so, then how can I set it back to the old configuration that was saved?
View 5 Replies View RelatedI have dap-1522 version A Browser IE8 with lestest updates.
I downloaded the DAP1522_FW_1.31zip went I try to upload via the 1522 admin error not correct file.
I try three different way to download it, could the file be bad on dlinks web site?
I just purchased a DAP-1522. The sticker on the bottom says it's a version B1, with firmware 2.0.In the web interface, it says: "Firmware Version : 1.21 , Fri 26 Jun 2009"I downloaded the 2.01 firmware from the D-Link site and when I try to upload it, it says it's not an image file.
View 11 Replies View RelatedHad to reset out DIR-655 router. This ended up changing our network password. Unfortunately, my DAP-1522 was not informed of this change and it will not connect to my Directv receiver now. I attempted to log into the bridge to change the password and it will not let me in. I attempted to reset the DAP in hopes that I would just be able to start over from scratch, but no dice (Assuming that I did it correctly)
View 4 Replies View RelatedI up graded to latest f/w. Now I can only log into the unit for about 1 minute before a get a limited connectivity warning, then it boots me out.
View 7 Replies View RelatedWith firmware version 1.31, the Wireless settings page is blank when a browser other than Internet Explorer is used to access it - for instance, Firefox or Chrome.All other pages appear and seem to work properly, only the Wireless settings page is empty. Luckily, the Wizard still works and can be used to set the Wireless settings for general purpose use. Older versions of the firmware worked fine with other browsers, including the Wireless settings page.
View 6 Replies View RelatedI have just upgraded my network to the 802.11n standard, or at least am trying to do that. Im using a DIR-615 as Access Point and a DAP-1522 as bridge to cover the entire area.After having some trouble figuring out how to set up and connect the devices, i figure out that it might some other problem than my setup of the devices (The symptom was that the connection was ok, but then it seemed to be dropped, even though the DAP-1522 still displayed connected in the status page).
After reading what I could find about the DIR-615 and DAP-1522 in this forum and on the internet, I found a suggestion about changing the Wireless Mode from 802.11b/g/n to 802.11b/g, and after doing that everything works fine, its just not an upgrade anymore.I have fixed the channel to 10, just to check that it wasnt noise from other equipment. The symptoms are very reproducable, trying to connect wiin n-mode and bridge only works for 30-60 secs. Switching back to b/G mode and all is fine.
I have a DIR-655 set up as follows: [code] Lost Internet Access on my DAP-1522 on only my wireless laptop connection, but not other wireless nodes on the DAP-1522.I have most of my wireless nodes attached to the DIR-655, which is upstairs. Downstairs is where the DAP-1522 is located. There is a wired connection between the DIR-655 and DAP-1522. The DAP-1522 is being used as a Access Point. On this I have only three nodes that are wireless. My Smartphone, iPad and my laptop. There are also three nodes that are using the wired ports with no issue accessing the internet. The setup above have being working for over two years with no issue. Then three days ago my laptop connects to the DAP-1522, but has "No Internet Access." If I change my wireless connection to the DIR-655 on my laptop, then I do have internet connection. My Smartphone and iPad still are able to access the DAP-1522 and get the internet.
I have deleted my DHCP Reservation for only my laptop on the DIR-655. Wireless connection to the DAP-1522, looked at the DIR-655 and see that DHCP Reservation show the MAC of the laptop and I Reserve it. Still "No Internet Access." On the DAP-1522 it does show that my laptop is associated to this device. I cannot ping my local LAN IP Addresses , a website or Public IP Address only from the laptop. The DIR-655 shows a "Do Not Enter: Wireless system with MAC address 4025C2B97110 disconnected for reason: Received Deauthentication" with a connection to the DAP-1522, but shows "Do Not Enter: Wireless system with MAC address 4025C2B97110 secured and linked" with a connection to the DIR-655.
I have a defective DAP-1522, or what. First off, I have never been able to access the unit at http://DLINKAP when my computer is connected directly to the 1522 via ethernet, only 192.168.0.50 works to bring up the web interface.
Second, I have more than one AP at my house, but the DAP-1522 is the only networking device I have have problems with (I am using the unit in AP mode). Basically, the problem is the wireless connection usually is much slower than my other APs (both N and G), even when the computer is physically right next to the DAP-1522. And that's when the unit is at it's best. At it's worst, I can't connect to the internet at all, even though my laptop shows full signal strength. The 1522 just seems really finicky. The problem doesn't seem to be a networking issue, because a 2nd AP that is connected through the wired portion of the DAP-1522 works perfectly, implying the 1522 is having no networking issues when using the ethernet ports. But since the problems persist with full signal strength and with the computer right next to the 1522, it doesn't seem to be a wireless connection issue either. And I have no problems connecting to any other wireless APs I own (and I own about 5 others, not that I use them all at the same time).
If I could, I would return my 1522, but I've been tinkering with it for too long now to return it. It has caused me a ton of frustration. I had a wired-only router for a long time (hence the purchase of the 1522), but just bought a new wireless-N router that is performing perfectly (as a router, and as an N AP). I hoped the old router might have not been playing nice with the 1522, but have seen no improvement with the 1522 wired to the new router (on opposite ends of my home).
Note that I use Macs only, no Windows machines. I started with the 1.02 firmware for the 1522, now have 1.20 firmware, but have noticed no improvements with my issues.
There is new firmware for the B series of the Dir-825 but the change log is not updated.
View 10 Replies View RelatedIt took a while but I've had my 1522 running well for several days. However, if I power down and then power up the 1522, it never reconnects. The bridge mode light flashes 5 times, then - nothing.
So, I have to disconnect everything, bring the 1522 back to my main PC, attach it, let it connect properly, then unattach and re-attach at it's use site.
(I'm using a static IP address and a Cisco E3000 router working perfectly with all my other stuff. Firmware v1.31)
I currently have a DAP1522 in Bridge mode with a DIR655. I am only using the 2.4GHz G mode on my 655. In a few days I will be replacing the 655 with an 825. When I log into the 1522 I don't see any settings for Mode, Frequency or Width (while in Bridge mode). The page for wireless setup is blank except for the "Save Settings" button. When I look at the 655, it appears that the 1522 is connected (bridged) at 2.4 GHz G like I would expect. So, when I install the 825 how do I make it connect at 5GHz N or will that be automatic if my SSID on the N mode of the 825 matches SSID on the 1522?
View 1 Replies View RelatedI'm trying to hook up a dap-1522 to an SMC8014WG wireless router. All goes well for about 10 minutes then the SMC drops all wireless connections except the connection to the 1522, and loses internet connectivity.There are several other wireless devices connected to the SMC but none of them causes it to go down.
View 6 Replies View RelatedI have a brand new DAP-1522 A1 connected to an 802.11n wireless LAN in bridge mode. Running in the 2.4GHz band with WPK-2 and AES security/encryption.Everything runs fine 99% of the time, but once a day or so the wireless LAN connection on the DAP-1522 drops and then takes about two minutes to re-connect. It re-connects and then everything is fine for a day or so until the next dropped wireless connection episode on the DAP-1522. I know my 802.11n wireless network is 100% fine as during the dropped connection to the DAP-1522 I can connect directly to the 802.11n wireless network (running from my gateway/router) using my other computer, no issues.I've seen some posts on this forum that the A1 version of the DAP-1522 hardware is not 100% compatible with the 802.11n network standard and there will be intermittent wireless drops. If this is true, it's just insane. All I can say is I can't believe DLink would allow a product to be sold that won't work properly on 802.11n networks.I check the logs each time I see the dropped wireless connection and all that shows is the following.1) Negotiating connection 2) 4-way handshake success [mac address]There's no message in the logs about why the wireless connection dropped, but I assume it has something to do with re-newing a key for the wireless network as the successful key renewal messages are the only other messages in the log. When the wireless network dropped I don't see the successful key renewal message at the time I should see it.I thought this DAP-1522 would take 15 minutes to configure in bridge mode and then I'd forget about it. Spend too much time on this already, so a bit disappointed with this DAP-1522 and DLink tech support....though when it's connected to the 802.11n wireless LAN it works fine.
View 14 Replies View Related'Use Unicasting' is selected by default in the Dynamic IP (DHCP) connection type.I turned it off based upon the router's support text since the router gets an IP address from my cable modem.I don't understand this option at all. I've searched for data on the topic and I can't make sense of it.I think I made the correct selection by un-selecting 'Use Unicasting.'
View 14 Replies View RelatedRegion : Italy
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 120822
ISP : TIM
I have a compatibility problem with the 3G USB Modem ONDA MT191UP with 3220 V2 updated with the firmware 120822 uploaded on TPLINK web site . Every thing is ok , the wireless is created , but the internet connection is missing . The router does not show the USB led , and it remain always in "connecting" but nothing happen . Do you have some infor to be compatible this USB modem ( some firmware , some Bin file etc..) ?I checked the Huawei E1800 and it works perfectly.
will updating my RV042 firmware allow me to download larger files? How do I know what version to update to? Our current version is 1.3.7.4
View 1 Replies View Relatedi have Aztech DSL605EW wireless modem. I updated its firmware on some philipines Globle Broadband network's firmware. Now the problem is to open its configration I have to use 192.168.254.254 IP and the configuration settings are very limited and there is no option of updating firmware in it. I am stuck with it.
View 3 Replies View RelatedI have a problem updating firmware for an WAP610N access point. The thing is i tryed to update from 1.0.01 to 1.0.03 and the update freezed at 49%. The next day it was restarted but of course it didn't worked again. The question is can i reset it some how so i can retry the firmware update ?
View 2 Replies View RelatedWhen I bought my E1200 router my primary (in fact only) computer was a Windows laptop. Since that time I bought a MacBook Pro and have been using that as my primary computer. The Mac is running on the latest OS (Mountain Lion).
I would like to install the latest software to maintain the router on my Mac but I was told several months ago that there was no update available for Mountain Lion. If that has changed, and if so then where can I download the appropriate software?
what is the process of updating firmware on a SGE2010.
I would usually use TFTP - but, I can't see the TFTP command on these SGE2010's
(my connection is a wired cable/DSL modem btw, using a second temp connection to troubleshoot)Last night, my connection was all fine and dandy until I got up this morning. Instead of having access to it and it being set as a home network, it was set to unidentified and public and I now have no internet access on the network. I can't change the network type either, it's stuck as public.[CODE]
View 1 Replies View RelatedI have an EA2700 which I am trying to rollback to the older interface, however it errors out every time I try to install the firmware.All I ever get is this message: Unexpected Error The firmware update did not complete successfully. Please try again later.We've encountered an unexpected error. If the issue continues, please visit our Technical Support site.I've reset the router multiple times, powered it off overnight, re-downloaded the file multiple times, and am still unable to successfully rollback. Sometimes it even errors out when I try to set the password on the router itself and I have to reset it again before I can use the interface.
View 9 Replies View RelatedI was brought a WAP200 that was giving a client some issues. I've been told the first thing to try is to update/reinstall the firmware. I have the newest firmware file downloaded and saved, and I have the WAP200 plugged in and sitting on my desk.
I reset the access point and connected it directly to my computer with a patch cable, then entered the default IP address (192.168.1.245) to attempt to access the device. No go. Is that supposed to work and something is wrong with it? All I want to do is update the firmware, because if the device has been reset and the firmware reinstalled and it's still not working, then we'll just deem it defective and have it replaced.