D-Link DIR-655 :: Unable To Access Web After Updating Firmware To 1.35NA
May 3, 2011
Few days ago, I updated the firmware of my router to 1.35NA and everything seemed to be working fine at first. After a while though, I noticed my Nexus One phone wasn't getting internet through WiFi anymore. It is connected to WiFi still, and it can ping the other devices on the network but it won't connect to the web. I have a Xoom tablet connected to WiFi as well and it is getting access to the web, though it seems to drop web access from time to time too, even before the firmware update. My phone always had a connection to the web through WiFi before the update. The two PCs that have a wired connection work fine. In the router logs, I also noticed that "UPnP renew entry 255.255.255.255 <-> ... UDP timeout:0 'Teredo'" being spammed over and over since the update, which I read has something to do with IPv6?
View 14 Replies
ADVERTISEMENT
Dec 30, 2010
I tried updating my firmware of my DIR-655 from 1.34NA to 1.35NA (Hardware Version: A1/A2).
However, I found something strange while updating the firmware, that made me stop, in order to ask the question.
Previously, when I did an update, I would browse for the location, and put it in, and it would allow me to update from that location.
Now, it will allow it, but when I select to update from the desktop (C:usersderickdesktop),
it comes up with another location (C:fakepath) for the .bin file.
View 9 Replies
View Related
Jan 19, 2011
I've been using the web filter with no problem with my A3/1.33NA router until I upgraded to 1.35 last week. After the upgrade, i did a hard reset and re-entered the websites manually from scratch to the DENY list. I didn't even reuse the saved config file. And now the router no longer blocks any of the websites in the webfilter page even when i selected the ALLOW option.
View 14 Replies
View Related
Dec 3, 2011
I updated my firmware to the latest update a and then restored My personnel setting and now I can not access my ftp, I checked my IP address to make sure it didn't change , setting looks like did before update I went from firmware 121 to 135, was there new setting that I have to change to get it to work. I get no log in screen I get Windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access the folder?
Details:A connection with the server could not be established
View 2 Replies
View Related
Feb 26, 2011
i just thought i would try 1.35na firmware and i decided i wanted to go back to 1.33na, well you cant BE FOREWARNED.
i don't know what is the big deal about stopping you from downgrading your firmware that they lock you out of it. it never used to be a problem, pretty sure i could downgrade from 1.34na to other 1.3 firmware.
the reason for allowing people to downgrade is incase the new firmware does not work properlly. not allowing your customers to do this is just asking for trouble not to mention alienating your customers.
at work we downgrade firmware to the firmware that passed our quality tests, it also makes it easier to support them when they are all the same.
1.35 works well so i dont have to buy another router. if it doesn't you can be sure it wont be another dlink thats for sure.
View 3 Replies
View Related
Jan 12, 2011
I purchased a DIR-655 (A4) a few weeks ago, and was encountering a problem. I immediately upgraded to 1.35NA after I bought it. First, the actual problem: With WMM enabled, my internet speeds are very inconsistent. By that, I mean it will fluctuate between full ISP speed and less than half the speed. A few seconds at full, a few seconds at half or less, and so on. Well, when I disable WMM, with everything else the same, the internet speeds suddenly become consistently fast at full speed, but PC-to-PC (LAN-to-LAN) wireless transfers slow down considerably. So no matter what I do I get a negative result.
Thus, I figured I would try downgrading the firmware to 1.32NA, 1.33NA, or 1.34NA, as I read that it is not possible to downgrade directly to 1.2x. I thought I would simply troubleshoot the problem myself. Unfortunately, no matter which firmware I try, except 1.35NA, it gives me a paragraph explanation; something like "This file was either not intended for this router, or it is corrupt. Your router will not be programmed." It did allow a reflash of 1.35NA, though. I downloaded multiple firmwares directly from the D-Link ftp multiple times, using a different router, so the files should not be corrupt.
Is it simply not possible to downgrade once you flash 1.35NA? For the record, I also tried a few of the workarounds I found on the internet: (1) do a hard reset by holding in the reset button and cycling power for 30 secs. (2) I tried some firmware directly from the German FTP which was supposed to allow a downgrade, but still got the same error as above. (3) I also tried some Russian firmware and it didn't work either. I was using a hardwired connection to the router during all attempts to flash.
View 5 Replies
View Related
Jan 22, 2011
I have a DIR-655 rev A4 with firmware 1.35NA.I read [URL] 5 which stated that the SECURESPOT feature was removed as of firmware 1.35NA but since upgrading the router to 1.35NA I find the following two log entries mentioning securespot being initiated:
[INFO] Sat Jan 22 21:01:21 2011 Initiating securespot services.
[INFO] Sat Jan 22 21:01:21 2011 Allocating securespot services.
I will mention, before upgrading to 1.35NA I was running the stock 1.21 firmware that shipped with this router. Prior to updating to 1.35NA I had taken a backup of the router settings and after the firmware update was applied I restored this settings backup. Could that be the reason this log entry is showing up? It makes me think securespot is not really removed as is claimed in the release notes for this firmware.Can anyone else with a DIR-655 A4 w/firmware 1.35NA confirm the above two log entries mentioning securespot appear in the log (assuming ALL log settings are turned on) when your router is rebooted?
View 2 Replies
View Related
Jul 17, 2011
I would upgrade the firmware before deciding to replace router with a new one. I noticed there have been several updates to the firmware since I originally installed the router with the current available firmware version of 1.35NA.
View 12 Replies
View Related
May 21, 2011
How do I check to see if my firmware needs updating? I want to connect it to a motorola 2210-02.
View 4 Replies
View Related
Aug 9, 2012
i have an DIR-655 Hardware Version: A4, with Firmware Version: 1.21.Its dated: 2008/11/13.Do i get any improvement updating? And in such case, which FW should i use? It must be rock solid!
View 3 Replies
View Related
May 9, 2011
a friend of mine(from the US) gave me this router. i am currently living here in the Philippines. and as I check my router's homepage, it gives me
Product Page: DIR-655
Hardware Version: A3
Firmware Version: 1.21
when I go to tools>firmware and check for the latest version, I get
Current Firmware Version : 1.21
Current Firmware Date : 2008/10/09
This firmware is the latest version.
I don't experience problems using this firmware but I think it's outdated because most of the users in the forum uses new firmwares.
where can I download firmware that is suitable for my router?? and is it risky?
should i download from the D-Link Philippines website? (the router was not bought here)[URL] or North America Firmwares should work fine on my router?
View 8 Replies
View Related
Oct 21, 2011
My DIR-655 stopped working after updating firmware to 3.35. Only power light comes on. port4 flashes for a microsecond when I plug it in. Recovery mode has not done anything. Computer acts like nothing is connected through Ethernet, says "No Cable Connected." Only power light stays on the whole time. I am guessing this thing is broken now. when i go through ipconfig, "no media connected." If not whats a good router under a hundred bucks today, had this router since early 2007.
View 10 Replies
View Related
Nov 29, 2011
I recently updated my firmware for a DIR-601 router and have internet while hardwired, but no wireless. I saved the configuration settings before updating, but this doesn't even matter because my wireless router doesn't even show up in the list of available wireless network connections. Why isn't my router showing up? I tried a few things like unplugging it and resetting it, but nothing seems to work.
View 3 Replies
View Related
Jun 29, 2011
For some reasons, my internet connection keeps dropping more often recently. My laptop still says it is connected to my network but I can just not have internet connection. It was not like that before but it happened more frequently now. What I did was to power off then on the modem and the router and everything will work fine again. I want to upgrade my firmware but I just wonder if I need to save all the configuration before doing the upgrading? If so, then how can I set it back to the old configuration that was saved?
View 5 Replies
View Related
Mar 27, 2012
I have my dap-1522 connected to my dir-655 in bridge mode. I was having intermitant connection problems with the dap-1522, so I updated the firmware to 1.41 for version A1. Now when I go to change the connection type to dynamic ip and save, it reverts back to static ip, which makes this thing useless for my network. Why won't it save?
View 6 Replies
View Related
Mar 26, 2012
I have a problem updating firmware for an WAP610N access point. The thing is i tryed to update from 1.0.01 to 1.0.03 and the update freezed at 49%. The next day it was restarted but of course it didn't worked again. The question is can i reset it some how so i can retry the firmware update ?
View 2 Replies
View Related
Apr 13, 2012
I have a Cisco rv220w. I just tried updating the firmware. I used RV220W-Firmware-1.0.3.5.img. It rebooted, and now there is no DHCP and no access to anything. I tried the reset button for 10 seconds. That didn't do anything. The WAN and all the LAN lights light up. Power is on and solid. The light blinks alternating between the DMZ and the blank space to the right of wireless. How can I get this back to factory defaults?
View 5 Replies
View Related
Aug 28, 2011
For some reason I can't get Access Control/Webaccess Filters working on my Dir-655 w/ 1.35NA. I've tried it with MAC and IP Address without any success. I've also enabled/disabled/enabled DNS Relay, recreated the rules, recreated the filters, etc. Nothing.
View 14 Replies
View Related
Mar 4, 2011
I have just updated myDIR-655 A4 to firmware 1.35NA by the procedure: save config > upload firmware > load config.However after upgrading, my admin page now logout after every ~10 sec of inactivity.I have tried the method where to view the admin page without a style, to be able to set the timeout period, from 5 mins to 3, 8 and 10 mins, but no matter what I set, it still logs me out after ~10 sec.
View 4 Replies
View Related
Sep 5, 2011
will updating my RV042 firmware allow me to download larger files? How do I know what version to update to? Our current version is 1.3.7.4
View 1 Replies
View Related
May 12, 2011
So, after everyone was raving about the 1.35NA version, I downloaded it. As I always do, I disabled my wireless NIC and connected an RJ-45. I saved my config to a .gws file. I uploaded the new firmware. When I went to reload my settings file, it said it was not a valid file. I tried multiple times. I even tried earlier versions of saved config files. Same thing.
So, I figured I'd revert to the 1.34NA firmware it was previously on. It wouldn't take it. So, I used the router config "system" page and chose "restore factory defaults". It didn't work. It still had the 1.35NA. So, I used the router's reset button. I held it in for 10 seconds, saw the system lights all blink in unison. I checked the config page and it was still on 1.35NA.
View 2 Replies
View Related
May 5, 2011
Is it possible to go back to FW 1.34NA from 1.35NA ? I tried all normal methods and got poo-poo'd by the router...
View 1 Replies
View Related
Jan 3, 2011
Today I modified a firmware 1.34WW which is stitched atop 1.35NA ! [URL]
View 11 Replies
View Related
Jun 19, 2011
i have Aztech DSL605EW wireless modem. I updated its firmware on some philipines Globle Broadband network's firmware. Now the problem is to open its configration I have to use 192.168.254.254 IP and the configuration settings are very limited and there is no option of updating firmware in it. I am stuck with it.
View 3 Replies
View Related
Feb 28, 2013
When I bought my E1200 router my primary (in fact only) computer was a Windows laptop. Since that time I bought a MacBook Pro and have been using that as my primary computer. The Mac is running on the latest OS (Mountain Lion).
I would like to install the latest software to maintain the router on my Mac but I was told several months ago that there was no update available for Mountain Lion. If that has changed, and if so then where can I download the appropriate software?
View 9 Replies
View Related
Oct 20, 2012
what is the process of updating firmware on a SGE2010.
I would usually use TFTP - but, I can't see the TFTP command on these SGE2010's
View 1 Replies
View Related
Apr 25, 2011
I recently upgraded my DIR-655, H/W Version A3 from 1.21 w/o SecureSpot to 1.35NA. My understanding this that this version isn't supposed to have any SecureSpot support. However, whenever the router is rebooted, the logs contain an entry that reads:
Bsecure remote access enabled on port 8098.
View 10 Replies
View Related
Jul 3, 2012
I have an EA2700 which I am trying to rollback to the older interface, however it errors out every time I try to install the firmware.All I ever get is this message: Unexpected Error The firmware update did not complete successfully. Please try again later.We've encountered an unexpected error. If the issue continues, please visit our Technical Support site.I've reset the router multiple times, powered it off overnight, re-downloaded the file multiple times, and am still unable to successfully rollback. Sometimes it even errors out when I try to set the password on the router itself and I have to reset it again before I can use the interface.
View 9 Replies
View Related
Aug 2, 2012
I was brought a WAP200 that was giving a client some issues. I've been told the first thing to try is to update/reinstall the firmware. I have the newest firmware file downloaded and saved, and I have the WAP200 plugged in and sitting on my desk.
I reset the access point and connected it directly to my computer with a patch cable, then entered the default IP address (192.168.1.245) to attempt to access the device. No go. Is that supposed to work and something is wrong with it? All I want to do is update the firmware, because if the device has been reset and the firmware reinstalled and it's still not working, then we'll just deem it defective and have it replaced.
View 1 Replies
View Related
Sep 5, 2011
I just updated my RV042 to the firmware RV0XX-v4.0.4.02-tm-20110704-code.bin and now im having this error every time that i try to logon in the router? 404 Not FoundThe requested server-side-includes filename, /usr/local/EasyAccess/www/htdocs/default.htm, does not seem to exist.
View 7 Replies
View Related
Jan 13, 2011
For those of you foolish enough to upgrade to your firmware to 1.35NA, only to find that all your wireless clients are intermittently dropped randomly at the same time, read on.At the time of this simultaneous drop, the logs will tell you that the clients were "disconnected due to deauthorisation" or some such (precise wording eludes me, has not occurred for a while, which is a good thing!). The clients are then quickly "authorised", but the movie you were streaming to your living room has already been interrupted and all your family members have gone for an unexpected toilet / snack break. Needless to say, the movie is ruined. Playing/hosting online games is an exercise in slowly pulling out all your remaining hair folicles. A random 20s delay when surfing the web is also fun. The list goes on.
A quick glance at the forum suggests this is a common problem, with the only reproducible solution to downgrade your firmware, perhaps all the way to 1.21.Get this though, you cannot downgrade 1.35NA by any means known to us internet-using, neanderthal-descendant primates (yes, your ancestor interbred with them). All workarounds to downgrade the firmware currently do not work for the new firmware.Why this is not suggested more often on these forums, I cannot fathom. There are a few threads that end like this though: "Oh, switched to WPS and the problem went away.Of course, if your wireless clients do not support WPS, then, um...facepalm yourself again. Only one of them has to though, the rest non-WPS clients you can copy paste the extremely long password to.Not so important settings: (changing these will do nothing to alleviate the drops)
Now that I have provided you with the meaning to life, the universe, and everything (42, I mean WPS), enjoy "normal" wireless behaviour again. OMG, I can actually surf the internet, torrent, play games, stream movies again.Some far more knowledgeable person might speculate as to the reason why this is so...actually, I will start the useless speculation. There must have been a security issue, that was remedied with the more recent 1.3xx firmwares. At the same time, constant authorisation checks were added. The deauthorisation/ authorisation cycle is snappy and unnoticeable with WPS, yet horrible without WPS.
View 12 Replies
View Related
May 14, 2011
Have the DIR-655 Hardware Version A1. Firmware 1.00NA dated Feb 2010. When I try to upload ANY firmware update from the DLINK site, it says that it is not for that device or is corrupt.
View 5 Replies
View Related
Aug 5, 2012
I tried to proceed with the update of the firmware on my DIR-835 router. I want to install version 1.0.2 of the firmware.I tried without success with Chrome and IE9. I get to a blank page and nothing downloads IE9 A PDF file is downloading but not the firmware update itself
View 1 Replies
View Related
