D-Link DIR-655 :: Downgrade From 1.35NA To 1.34WW?
Jan 3, 2011Today I modified a firmware 1.34WW which is stitched atop 1.35NA ! [URL]
View 11 Replies
ADVERTISEMENT
D-Link DIR-655 :: 1.35na Firmware Does Not Allow Downgrade
Feb 26, 2011i just thought i would try 1.35na firmware and i decided i wanted to go back to 1.33na, well you cant BE FOREWARNED.
i don't know what is the big deal about stopping you from downgrading your firmware that they lock you out of it. it never used to be a problem, pretty sure i could downgrade from 1.34na to other 1.3 firmware.
the reason for allowing people to downgrade is incase the new firmware does not work properlly. not allowing your customers to do this is just asking for trouble not to mention alienating your customers.
at work we downgrade firmware to the firmware that passed our quality tests, it also makes it easier to support them when they are all the same.
1.35 works well so i dont have to buy another router. if it doesn't you can be sure it wont be another dlink thats for sure.
D-Link DIR-655 :: Can't Downgrade From Firmware 1.35NA
Jan 12, 2011I purchased a DIR-655 (A4) a few weeks ago, and was encountering a problem. I immediately upgraded to 1.35NA after I bought it. First, the actual problem: With WMM enabled, my internet speeds are very inconsistent. By that, I mean it will fluctuate between full ISP speed and less than half the speed. A few seconds at full, a few seconds at half or less, and so on. Well, when I disable WMM, with everything else the same, the internet speeds suddenly become consistently fast at full speed, but PC-to-PC (LAN-to-LAN) wireless transfers slow down considerably. So no matter what I do I get a negative result.
Thus, I figured I would try downgrading the firmware to 1.32NA, 1.33NA, or 1.34NA, as I read that it is not possible to downgrade directly to 1.2x. I thought I would simply troubleshoot the problem myself. Unfortunately, no matter which firmware I try, except 1.35NA, it gives me a paragraph explanation; something like "This file was either not intended for this router, or it is corrupt. Your router will not be programmed." It did allow a reflash of 1.35NA, though. I downloaded multiple firmwares directly from the D-Link ftp multiple times, using a different router, so the files should not be corrupt.
Is it simply not possible to downgrade once you flash 1.35NA? For the record, I also tried a few of the workarounds I found on the internet: (1) do a hard reset by holding in the reset button and cycling power for 30 secs. (2) I tried some firmware directly from the German FTP which was supposed to allow a downgrade, but still got the same error as above. (3) I also tried some Russian firmware and it didn't work either. I was using a hardwired connection to the router during all attempts to flash.
D-Link DIR-655 :: 1.35NA Timeout In Like 10 Sec
Mar 4, 2011I have just updated myDIR-655 A4 to firmware 1.35NA by the procedure: save config > upload firmware > load config.However after upgrading, my admin page now logout after every ~10 sec of inactivity.I have tried the method where to view the admin page without a style, to be able to set the timeout period, from 5 mins to 3, 8 and 10 mins, but no matter what I set, it still logs me out after ~10 sec.
View 4 Replies View RelatedD-Link DIR-655 :: Can't Revert Or Reset After 1.35NA
May 12, 2011So, after everyone was raving about the 1.35NA version, I downloaded it. As I always do, I disabled my wireless NIC and connected an RJ-45. I saved my config to a .gws file. I uploaded the new firmware. When I went to reload my settings file, it said it was not a valid file. I tried multiple times. I even tried earlier versions of saved config files. Same thing.
So, I figured I'd revert to the 1.34NA firmware it was previously on. It wouldn't take it. So, I used the router config "system" page and chose "restore factory defaults". It didn't work. It still had the 1.35NA. So, I used the router's reset button. I held it in for 10 seconds, saw the system lights all blink in unison. I checked the config page and it was still on 1.35NA.
D-Link DIR-655 :: Updating Firmware To V1.35NA?
Dec 30, 2010I tried updating my firmware of my DIR-655 from 1.34NA to 1.35NA (Hardware Version: A1/A2).
However, I found something strange while updating the firmware, that made me stop, in order to ask the question.
Previously, when I did an update, I would browse for the location, and put it in, and it would allow me to update from that location.
Now, it will allow it, but when I select to update from the desktop (C:usersderickdesktop),
it comes up with another location (C:fakepath) for the .bin file.
D-Link DIR-655 :: Can Go Back To 1.34NA From 1.35NA
May 5, 2011Is it possible to go back to FW 1.34NA from 1.35NA ? I tried all normal methods and got poo-poo'd by the router...
View 1 Replies View RelatedD-Link DIR-655 :: Rev A4 - Firmware 1.35NA - Securespot Log Entries?
Jan 22, 2011I have a DIR-655 rev A4 with firmware 1.35NA.I read [URL] 5 which stated that the SECURESPOT feature was removed as of firmware 1.35NA but since upgrading the router to 1.35NA I find the following two log entries mentioning securespot being initiated:
[INFO] Sat Jan 22 21:01:21 2011 Initiating securespot services.
[INFO] Sat Jan 22 21:01:21 2011 Allocating securespot services.
I will mention, before upgrading to 1.35NA I was running the stock 1.21 firmware that shipped with this router. Prior to updating to 1.35NA I had taken a backup of the router settings and after the firmware update was applied I restored this settings backup. Could that be the reason this log entry is showing up? It makes me think securespot is not really removed as is claimed in the release notes for this firmware.Can anyone else with a DIR-655 A4 w/firmware 1.35NA confirm the above two log entries mentioning securespot appear in the log (assuming ALL log settings are turned on) when your router is rebooted?
D-Link DIR-655 :: Webfilter Fails After Updating To 1.35NA?
Jan 19, 2011I've been using the web filter with no problem with my A3/1.33NA router until I upgraded to 1.35 last week. After the upgrade, i did a hard reset and re-entered the websites manually from scratch to the DENY list. I didn't even reuse the saved config file. And now the router no longer blocks any of the websites in the webfilter page even when i selected the ALLOW option.
View 14 Replies View RelatedD-Link DIR-655 :: Why Does 1.35NA Open A Port For BSecure
Apr 25, 2011I recently upgraded my DIR-655, H/W Version A3 from 1.21 w/o SecureSpot to 1.35NA. My understanding this that this version isn't supposed to have any SecureSpot support. However, whenever the router is rebooted, the logs contain an entry that reads:
Bsecure remote access enabled on port 8098.
D-Link DIR-655 :: Unable To Access Web After Updating Firmware To 1.35NA
May 3, 2011Few days ago, I updated the firmware of my router to 1.35NA and everything seemed to be working fine at first. After a while though, I noticed my Nexus One phone wasn't getting internet through WiFi anymore. It is connected to WiFi still, and it can ping the other devices on the network but it won't connect to the web. I have a Xoom tablet connected to WiFi as well and it is getting access to the web, though it seems to drop web access from time to time too, even before the firmware update. My phone always had a connection to the web through WiFi before the update. The two PCs that have a wired connection work fine. In the router logs, I also noticed that "UPnP renew entry 255.255.255.255 <-> ... UDP timeout:0 'Teredo'" being spammed over and over since the update, which I read has something to do with IPv6?
View 14 Replies View RelatedD-Link DIR-655 :: Current Version 1.35NA - Upgrade Firmware?
Jul 17, 2011I would upgrade the firmware before deciding to replace router with a new one. I noticed there have been several updates to the firmware since I originally installed the router with the current available firmware version of 1.35NA.
View 12 Replies View RelatedD-Link DIR-655 :: Intermittent Wi-Fi Signal Dropped Randomly 1.35NA
Jan 13, 2011For those of you foolish enough to upgrade to your firmware to 1.35NA, only to find that all your wireless clients are intermittently dropped randomly at the same time, read on.At the time of this simultaneous drop, the logs will tell you that the clients were "disconnected due to deauthorisation" or some such (precise wording eludes me, has not occurred for a while, which is a good thing!). The clients are then quickly "authorised", but the movie you were streaming to your living room has already been interrupted and all your family members have gone for an unexpected toilet / snack break. Needless to say, the movie is ruined. Playing/hosting online games is an exercise in slowly pulling out all your remaining hair folicles. A random 20s delay when surfing the web is also fun. The list goes on.
A quick glance at the forum suggests this is a common problem, with the only reproducible solution to downgrade your firmware, perhaps all the way to 1.21.Get this though, you cannot downgrade 1.35NA by any means known to us internet-using, neanderthal-descendant primates (yes, your ancestor interbred with them). All workarounds to downgrade the firmware currently do not work for the new firmware.Why this is not suggested more often on these forums, I cannot fathom. There are a few threads that end like this though: "Oh, switched to WPS and the problem went away.Of course, if your wireless clients do not support WPS, then, um...facepalm yourself again. Only one of them has to though, the rest non-WPS clients you can copy paste the extremely long password to.Not so important settings: (changing these will do nothing to alleviate the drops)
Now that I have provided you with the meaning to life, the universe, and everything (42, I mean WPS), enjoy "normal" wireless behaviour again. OMG, I can actually surf the internet, torrent, play games, stream movies again.Some far more knowledgeable person might speculate as to the reason why this is so...actually, I will start the useless speculation. There must have been a security issue, that was remedied with the more recent 1.3xx firmwares. At the same time, constant authorisation checks were added. The deauthorisation/ authorisation cycle is snappy and unnoticeable with WPS, yet horrible without WPS.
D-Link DIR-655 :: Webaccess Filter / Access Control Doesn't Work With 1.35NA
Aug 28, 2011For some reason I can't get Access Control/Webaccess Filters working on my Dir-655 w/ 1.35NA. I've tried it with MAC and IP Address without any success. I've also enabled/disabled/enabled DNS Relay, recreated the rules, recreated the filters, etc. Nothing.
View 14 Replies View RelatedD-Link DIR-655 :: How To Downgrade Back To Stable Version
Dec 25, 2012I've had the DIR-655 for a few months now, along with a Motorola Surfboard sb6121 DOCSIS 3.0.Modem works fine, the router was working perfectly fine until recently last week.
I have a desktop hardwired and a wireless network going on that I use just for my mobile phone and tablet at times. At first I was having disconnection problems with my wireless, then noticed a neighbor installed a similar router in the area according to my wifi analyzer, so I changed the channels and my wireless started working great. During this process I also did a firmware update and since then I've been receiving some really poor browsing problems, sometimes I'll visit websites like Facebook, or a news website, and it'll say something about the DNS not working, (at this point I'll ping the website and it still pings fine without any loss) so I'll visit the website about 10 minutes later and it works great. I've done extensive research on forums/Google and found it must link up to the new firmware update and something about a DNS relay? My version is: Hardware Version: B1 Firmware Version: 2.10NA
In other words, is there a way I can fix this issue from disconnecting without having to downgrade back to the old firmware? Or is this a common issue they'll continue to happen? If I do downgrade, HOW do I downgrade back to the stable version?
TP-Link 300Mbps Wireless :: TL-WR1043ND - Safe To Downgrade Firmware?
Feb 17, 2013Region : Hongkong
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 120405
ISP : Netvigator Broadband (18Mbps ADSL)
I'm having a problem with my TL-WR1043ND becoming non-responsive after a few days of uptime.This is actually my second 1043. I bought it because my first one (hardware version 1.4) has been rock solid -- I've not had to reboot it for over 2 years. (I don't have its firmware version handy at the moment, but I recall it's from 2010.)I needed this new router for a second location, but it has not been functioning correctly. It is hardware version 1.10 and shipped with the latest firmware, 120405. is it safe to downgrade the 1.10's firmware to the one that's running on the 1.4? Or is the hardware sufficiently different (e.g. different bootloaders)
Cisco :: Lms 4.1 To 4.0 Downgrade?
Feb 12, 2012I have installed LMS 4.1 but due to license issue i want to downgrade to 4.0 , is there any way to do that ? .
View 4 Replies View RelatedCisco AAA/Identity/Nac :: Downgrade ACS 5 - How To Do
Jul 24, 2012I want to downgrade an acs acs 5.3 to 5.2. I have looked through the documentation, but somehow I fail to find the exact commands for the downgrade.Previously I just used the recovery cd to reinstall the image, but it must be possible to do a downgrade without loosing all the configuration.
View 4 Replies View RelatedCisco Wireless :: Downgrade WLC 7.2.103.0 To 7.0.235.3?
Dec 22, 2012i have 2504 with software 7.2.103.0 and i want to downgrade to version 7.0.235.3 , but i face problem after the TFTP Transfer complete and display this erorr messagges:
- Sanity check failed on file. The file was not downloaded completely!
- TFTP Failure while storing in flash!
i will attache file contains " debuge transfer trace enable " while i transfer the software.
Cisco AAA/Identity/Nac :: ACS 5.3 - Get Downgrade To 5.2?
Jul 24, 2012I want to downgrade an acs acs 5.3 to 5.2 - I have looked through the documentation, but somehow I fail to find the exact commands for the downgrade.
Previously I just used the recovery cd to reinstall the image, but it must be possible to do a downgrade without loosing all the configuration.
Downgrade Cisco Unity Express?
Nov 13, 2011I managed to get an AIM-CUE for my 2801 router. I upgraded from version 3 to version 7.1.5. then realised I can't licence it without buying mailbox licences from Cisco (working on a budget for a lab) I tired to downgrade but I get the error
View 1 Replies View RelatedCisco VPN :: Asa 5520 8.4 And ASDM 6.4 Downgrade
Feb 23, 2012We are running ASA5520 with version 8.4(2)8 software and ASDM 6.4(5)205.We have noticed the following problems:When having more than 30 IPSec,sessions connected, the log fills up with errors "System is low on free memory blocks of size...", When filtering by "AnyConnect Client" in "Monitoring > VPN > VPN Statistics > Sessions" the values "Bytes Tx / Bytes Rx" column is presented in one line ie. "8450198968129194". Seems to be missing a <cr><lf>,When uploading a new CSD-image (via ASDM) all configuration för GPO, CP, DAP seems to dissapear, though, the config seems ok when looking at a sh run. Also, the newly updated csd-image doesn't show i ASDM.
View 2 Replies View RelatedCisco Wireless :: 2504 - WLC 7.4.100.0 Downgrade
Mar 13, 2013Some time ago I updated a WLC, model 2504, from version 7.3 to 7.4.100.0. I also update the FUS (Field Upgrade Software) to the latest release, 1.8.0.0. Now I need to downgrade the WLC back to 7.3 version.
My doubt is: Can I just take the normal processes and downgrade the WLC back to 7.3, even with the FUS in version 1.8.0.0?
Linksys Wireless Router :: EA6500 Downgrade To 1.1.27?
Dec 13, 2012provide me with the latest (or one) release of 1.1.27 firmware for the EA6500. I am deeply disappointed in the last firmware upgrade and due to security and sudden lack of certain, or let's say all, functionality in bridge mode I need to downgrade or wait for an upgrade where that's fixed, but most likely not soon, or ever. Where could I find the firmware downgrade.
View 2 Replies View RelatedLinksys Wireless Router :: Getting Downgrade For WRT160nV3?
Jun 21, 2010I need to downgrade my WRT160n so that it will work with Xbox LIVE again. I've been told by Xbox that the only certified working firmware for my router is 3.0.02.003, But I'm using 3.0.02.004.
View 9 Replies View RelatedCisco AAA/Identity/Nac :: ACS 1121 Appliance Downgrade To 4.2.0.124
May 2, 2011 Newly shipped cisco ACS appliance 1121 has been shipped with ACS version 5.0 , I need to downgrade to ACS version 4.2,0 , I could not see recovery CD or DVD for acs 4.2 along with shipment , Is ACS 1121 appliance is comptaible to acs 4.2.0 version ? .
My ACS BOM details
CSACS-1121-K9
ACS 1121 Appliance With 5.1 SW And Base license
[code]....
Cisco Wireless :: Software Downgrade On 2106
Mar 18, 2013I had a 2106 running 4.x software. It was upgraded to 7.x but will not read the config. How to downgrade the software?
View 4 Replies View RelatedCisco Wireless :: 8500 - Code Downgrade From 7.4 To 7.0
Jun 11, 2013Working on a project consolidating all controllers to a single 8500 controller with a standby. Moved an AP over to test the process and everything worked fine. Took a little longer than I thought it would, but given the design with new flexconnect abilities, the creation of AP groups well you know.
I get the AP over and one of my ssids doesnt work because the key is different, so gotta move the AP back over to resolve production issues.
when downgrading from 7.4 to 7.0?
Linksys Wireless Router :: Possible To Downgrade New EA4500
Oct 20, 2012I'm in the process of wanting to upgrade my wireless network but I'm not really agreeing to the Cloud Connect, I don't need to have my settings on the internet. I want to manage everything on my own. I've found the following link on the community to be able to put the classic firmware before the cloud connect feature {URL}.
My question now is : If I buy a brand new EA4500, will it still be possible to downgrade to that firmware? No problem with this one? I'm hoping Cisco will continue to publish bug fixing if any to this classic firmware.
Cisco VPN :: How To Downgrade To 2.5.3055 From 3.0.08057 On Mac OS 10.7.5 Lion
Dec 3, 2012I'm using the Cisco AnyConnect VPN Client (2.5.3055) to connect to a server "A". It has worked fine. Then I tried to connect to the server "B" from the free university of Berlin and then this installed (3.0.08057) automatically without asking. Connecting to server "A" does not work any more. The error message is: "The AnyConnect package on the secure gateway could not be located. You may be experiencing network connectivity issues. Please try again." So I tried to de-install the client with the shipped uninstaller and installed the previous 2.5 client again. but the Error message is still the same.so which files should I remove/edit to get it working as before. The network is OK, I tried it on a other computer under Windows Vista and there the freshly installed Client works fine. So I guess ther must be some files or configurations from the newer version in the way.
View 0 Replies View RelatedLinksys Wireless Router :: Firmware Downgrade For WRT54G?
Aug 6, 2011This seems to be an epidemic issue with LinkSys routers (with me myself running in the third such issue).This time, I would require the original firmware of the WRT54 ver. 4 series. Download links in older threads have 404d already.
View 1 Replies View RelatedLinksys Wireless Router :: Need To Downgrade WRT54GX2 / Where To Get Firmware
Nov 15, 2006Last night I upgraded my WRT54GX2 from 1.0.11 to 1.0.14, hoping to resolve some wireless connection issues. It did not work. It made something else break.
View 9 Replies View RelatedCisco Switching/Routing :: Nexus 7K Downgrade Failure
Feb 2, 2012After trying to downgrade a Nexus 7K from 5.2.1 to 5.1.5 by updating the boot & kickstart boot statements and reloading, I'm now stuck in an endless cycle of reloading. See below:
Is there a break sequence which will allow me to modify the boot statement back to the original via ROMMON or something similar?
[code]....