D-Link DIR-655 :: How To Downgrade Back To Stable Version
Dec 25, 2012
I've had the DIR-655 for a few months now, along with a Motorola Surfboard sb6121 DOCSIS 3.0.Modem works fine, the router was working perfectly fine until recently last week.
I have a desktop hardwired and a wireless network going on that I use just for my mobile phone and tablet at times. At first I was having disconnection problems with my wireless, then noticed a neighbor installed a similar router in the area according to my wifi analyzer, so I changed the channels and my wireless started working great. During this process I also did a firmware update and since then I've been receiving some really poor browsing problems, sometimes I'll visit websites like Facebook, or a news website, and it'll say something about the DNS not working, (at this point I'll ping the website and it still pings fine without any loss) so I'll visit the website about 10 minutes later and it works great. I've done extensive research on forums/Google and found it must link up to the new firmware update and something about a DNS relay? My version is: Hardware Version: B1 Firmware Version: 2.10NA
In other words, is there a way I can fix this issue from disconnecting without having to downgrade back to the old firmware? Or is this a common issue they'll continue to happen? If I do downgrade, HOW do I downgrade back to the stable version?
View 14 Replies
ADVERTISEMENT
Feb 9, 2011
I need USA style log. I have a DIR-825 B1 with Firmware Version: 2.05WW. How can I setup (; go back) to the USA 2.05NA version? The firmware upgrade was failed cause that the uploaded firmware file may not be correct..
View 8 Replies
View Related
Oct 6, 2011
i have been living in China for some time and bought a DIR-600M router from DLINK while I was there. While a friend configured it for me and everything was fine, i would love to have an english version of the firmware.... i have searched everywhere but couldnt find any english version for this particular model..I have tried to download and install the American version of the 600 model, but it seems as it does not accept this version as it always jumps back to the chinese version after rebooting....
View 1 Replies
View Related
Jan 22, 2013
I am looking upgrade my ASR routers to a newer code. I am running asr1000rp1-advipservicesk9.03.03.01.S.151-2.S1.bin now. Would like input on what a good stable version is. I am not bleeding edge so the latest version I won't trust.
View 5 Replies
View Related
Jul 2, 2012
upgrade experience with the 6509E on what IOS version to use. This is a new install, so I want the most current version that supports SSH and works with dual supervisors.
Here is some information:
WS-C5609-E with 983008K/65536K bytes of memory
Current version 12.2(18)SXF17b
Slot 5 Supervisor 720 (Active)
Slot 6 Supervisor 720 (Hot)
Just need a strong base code, no advanced services. Let me know if you any additional information.
View 2 Replies
View Related
Mar 29, 2012
I have Cisco 6513 with sup720 running s72033-adventerprisek9_wan-mz.122-18.SXF8.bin. I would like to upgrade with the latest and stable IOS.
View 5 Replies
View Related
May 12, 2011
Sometimes even if my connection is cable my router gets a yellow light..what can be the most stable firmware to use?
View 3 Replies
View Related
Sep 17, 2011
About two weeks ago, my internet connection became faster. I am not sure if it has to do with my cable ISP doing something or something I did with my computer.
Right around the same time, my connection began disconnecting every two or three days. Before this, I had a rock solid connection for two years.
It will usually reconnect after a minute. Otherwise, when I boot my computer, the problem is solved.
I am certain there is a correlation between the connection speed going up and my connection becoming less stable.
View 6 Replies
View Related
Dec 16, 2011
I bought a DIR-655 today so i can port trigger to all my xbox's instead of only being able to port forward to 1 xbox from my Netgear CGD24N. My problem is setting up a stable network that wont drop out.
What i am trying to set up: Internet --> Modem (Netgear CGD24N) <---> Router <---> Everything else (2 Xbox's, 5 Computers, Phone's)
I have one ethernet cord from my netgear to the internet port in my D-Link. Is that correct?
They are both set to DHCP as that is the only way i have been able to create a network that i can connect to the net through my router. Problem is it is constantly reconnecting and only getting speeds of 2mb dl and 1mb up. (I should be getting speeds of 30mb dl, 2mb up.)
View 1 Replies
View Related
Feb 26, 2011
i just thought i would try 1.35na firmware and i decided i wanted to go back to 1.33na, well you cant BE FOREWARNED.
i don't know what is the big deal about stopping you from downgrading your firmware that they lock you out of it. it never used to be a problem, pretty sure i could downgrade from 1.34na to other 1.3 firmware.
the reason for allowing people to downgrade is incase the new firmware does not work properlly. not allowing your customers to do this is just asking for trouble not to mention alienating your customers.
at work we downgrade firmware to the firmware that passed our quality tests, it also makes it easier to support them when they are all the same.
1.35 works well so i dont have to buy another router. if it doesn't you can be sure it wont be another dlink thats for sure.
View 3 Replies
View Related
Jan 12, 2011
I purchased a DIR-655 (A4) a few weeks ago, and was encountering a problem. I immediately upgraded to 1.35NA after I bought it. First, the actual problem: With WMM enabled, my internet speeds are very inconsistent. By that, I mean it will fluctuate between full ISP speed and less than half the speed. A few seconds at full, a few seconds at half or less, and so on. Well, when I disable WMM, with everything else the same, the internet speeds suddenly become consistently fast at full speed, but PC-to-PC (LAN-to-LAN) wireless transfers slow down considerably. So no matter what I do I get a negative result.
Thus, I figured I would try downgrading the firmware to 1.32NA, 1.33NA, or 1.34NA, as I read that it is not possible to downgrade directly to 1.2x. I thought I would simply troubleshoot the problem myself. Unfortunately, no matter which firmware I try, except 1.35NA, it gives me a paragraph explanation; something like "This file was either not intended for this router, or it is corrupt. Your router will not be programmed." It did allow a reflash of 1.35NA, though. I downloaded multiple firmwares directly from the D-Link ftp multiple times, using a different router, so the files should not be corrupt.
Is it simply not possible to downgrade once you flash 1.35NA? For the record, I also tried a few of the workarounds I found on the internet: (1) do a hard reset by holding in the reset button and cycling power for 30 secs. (2) I tried some firmware directly from the German FTP which was supposed to allow a downgrade, but still got the same error as above. (3) I also tried some Russian firmware and it didn't work either. I was using a hardwired connection to the router during all attempts to flash.
View 5 Replies
View Related
Jan 3, 2011
Today I modified a firmware 1.34WW which is stitched atop 1.35NA ! [URL]
View 11 Replies
View Related
Feb 11, 2012
My DIR-615 FW:2.25 HW:B2 has been running totally stable and reliably ever since it was purchased until very recently.
I have been running my entire house wireless with the following setup...
Cable Internet 25Mib down/2Mib up
Desktop PC (ASUS M32N-sli Deluxe w/integrated Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter) Latest drivers on Win 7
Laptop PC (Intel Wireless WiFi Link 4965AGN) latest drivers, on Vista
Wii
Samsung Galaxy Infuse 4G
Everything was fine until my roommate bought a Samsung Galaxy Nexus. Now I randomly lose wireless connection to every device on the network. Default gateway 192.168.0.1 becomes unreachable... resetting the router restores connectivity...
Very interesting to note is the fact that while wireless communication with the router fails, wired connections remain active with fully functional internet access.
View 4 Replies
View Related
Feb 17, 2013
Region : Hongkong
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 120405
ISP : Netvigator Broadband (18Mbps ADSL)
I'm having a problem with my TL-WR1043ND becoming non-responsive after a few days of uptime.This is actually my second 1043. I bought it because my first one (hardware version 1.4) has been rock solid -- I've not had to reboot it for over 2 years. (I don't have its firmware version handy at the moment, but I recall it's from 2010.)I needed this new router for a second location, but it has not been functioning correctly. It is hardware version 1.10 and shipped with the latest firmware, 120405. is it safe to downgrade the 1.10's firmware to the one that's running on the 1.4? Or is the hardware sufficiently different (e.g. different bootloaders)
View 2 Replies
View Related
Nov 25, 2012
I have a Cisco 8510msr that is connected back to back with a 7206vxr across a 155Meg connection.I receive lots of Output drops on the 7206vxr interface facing the atm switch. When I do the following command:-
kwdair9#sh atm int atm 1/0Interface ATM1/0:AAL enabled: AAL5 , Maximum VCs: 4096, Current VCCs: 27 Maximum Transmit Channels: 0Max. Datagram Size: 4528PLIM Type: SONET - 155000Kbps, TX clocking: LINECell-payload scrambling: ONsts-stream scrambling: ON797522 input, 881483 output, 203946630 IN fast, 223768062 OUT fast, 0 out dropVBR-NRT : 110288 Avail bw = 44712 <====
I only have 44megConfig. is ACTIVEkwdair9# I only get 44Meg of the available 155Meg.There is no QOS on the router and the only commands I can find that vaguely see that refer to QOS are on the ATM switch:-
atm address 47.0091.8100.0000.0007.0d87.b201.0007.0d87.b201.00atm router pnnino aesa embedded-number left-justifiednode 1 level 56 lowest redistribute atm-static?why this is acting like a DS3 link and not a 155Meg link?
View 4 Replies
View Related
Dec 4, 2011
What cable I need to connect two 2951 back to back through a HWIC-4T1/E1 card ?
View 1 Replies
View Related
Apr 11, 2013
I have two site that has a copper wire ( 2 wire) connection between each router ( No Telco in between ). Now I want to use 1921 router with HWIC-4SHDSL-E card to connect these two site together. Can I use attach configuration to make the connection reference from the diagram ?
View 1 Replies
View Related
Nov 25, 2011
I have 2650XM router and 2620 Router Both routers have built in WIC T1 CSU/DSU cards
2620Router --
2620Router#sh int se0/0
Serial0/0 is down, line protocol is down
Hardware is PQUICC with Fractional T1 CSU/DSU
Description: DTE side
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, loopback not set
[code]....
My question is that cisco website says there are two type of cable connections for this type of config --which are --T1 CSU/DSU ConfigurationSet one CSU/DSU to clock source internal, and the other CSU/DSU to clock source line. The linecode, framing, data-coding, and timeslots must be set the same on both CSU/DSUs.Four-Wire 56k CSU/DSU Configuration For my network connection which type of config i should use??Secondly i try to connect these ports by normal crossover cable it did not work.So for this type of connection i know i need T1 cross over cable-- which has RJ 48 connections at both sides.I check cable from ebay which is RJ45 RJ48 cross over -- will this cable work in my router to router connection.
View 5 Replies
View Related
Oct 19, 2012
I have 1 2611xm router and 1 2801 router. For my own lab purpose, i want to configure them back to back to support voice services. I don't know what configuration will be required at each end. in 2611xm, i have NM-2V and its also detecting the card, so i hope it will work ? also what commands i need to run on both ends .
View 1 Replies
View Related
Jan 8, 2013
I would like configure two router (e.g. 1921) back to back via a 2 pin copper wire. Can I use HWIC-4SHDSL-E card to do it? What is the configuration I can use?
View 7 Replies
View Related
Apr 14, 2013
I have two site that has a copper wire (2 wire) connection between each router ( No Telco in between )Now I want to use 1921 router with HWIC-4SH DSL-E card to connect these two ste together.Can I use attach configuration to make the connection reference from the diagram?
View 2 Replies
View Related
May 5, 2011
Is it possible to go back to FW 1.34NA from 1.35NA ? I tried all normal methods and got poo-poo'd by the router...
View 1 Replies
View Related
Feb 9, 2011
BRAND NEW DIR 655. Took a bit to get working. Connected at 300mbps beautifully. Then I started to notice I was lagging--I checked my connection speed and it's back down to 130mpbs.I made sure to do WPA2 only, 20/40 range... I don't know what else to do to make it "stick" to the speed I want. It's obviously quite capable of it. If I reboot it it connects at that speed.... it just randomly reverts back to 130.
View 14 Replies
View Related
Apr 5, 2011
I noticed that I'm unsecured what happened We have had many power outages and do not know how to get my WEP code back in do I reset and do all over again Surly their must be an easy way I don''t know?
View 1 Replies
View Related
Feb 29, 2012
Just to get this clear as having issues with a E1 link with CRC's at one.Router A,Network-Clock-Participate WIC 1,Should router B have clock participate for WIC 1? We currently have controllers set as UNFRAMED but guess we can set to NO-CRC4 both ends and telco will pass this.
View 1 Replies
View Related
Jan 7, 2013
I'm looking for instructions on how to setup and connect two RV082 routers together with a crossover cable between their WAN ports. This is to connect two separate LANS together via an ethernet connection. For staging we are setting everything up with a crossover cable in our shop. Ultimately the crossover cable will be replaced by a microwave link between the two LANS several miles apart. There will be no internet connection.
View 7 Replies
View Related
Aug 28, 2012
securing a back-toback connection using E1.The connection is between two cities, using 2x CISCO 1841 router + VWIC-1MFT-E1 interface at each city.
The E1 connections has been provided by our local telco, and they are completely private. The customer is a bank, and they asking me if this is a secure connection or not. If possible, we need to guarantee that no body can get access to the bank network even if they brought E1 modem at one of the ends (telco PoP).
View 11 Replies
View Related
Apr 7, 2013
I searched a lot but couldnt find a clear document about connecting 2 G.SHDSL routers back to back.First of all I am not sure which type of cable (RJ11) is used for connecting two 878 routers. Does it have to be cross or straight cable.
Which RJ11 pairs will be connected each other [code]
According the configuration samples One router must be CPE and the other must be CO for simulating DSLAM.
View 2 Replies
View Related
Sep 14, 2009
McAffee scan of acs 1113 appliance running the 4.2 build 124 patch 12 version reports that a medium vulnerability exists because the system has SSH version 1. Any way to specify only version 2 or turn off SSH?
View 9 Replies
View Related
Dec 15, 2011
I'm having some trouble getting two Cisco 888's to work correctly back to back.. The two routers will ultimately be used in conjunction with a BT EPS8 circuit which is effectively four wires short distance between customer sites. We have configured lots of these using the older Cisco 878's.
Anyway, as i've been struggling to get line sync on site I've gone back to basics and connected the two 888's back to back. However, I've found that no matter what I do I can only get the routers to sync at 384kbps!? And that's with a one meter RJ11-RJ11 cable.. Very strange. When we've used the 878's we get much more bandwidth. I have tried statically assigning the line rate at both ends but it still only works at 384kbps.
View 3 Replies
View Related
Jul 14, 2012
I live in a Townhome complex so inSSIDer displays a lot of wireless activity. I have noticed that many of the routers channels are listed as 6 + 2, 4 + 1, etc., while show only a single channel. I have been able to "temporarily" replicate this by setting the Channel Width on my DIR-655, by setting channel width to auto, and when I am successful it displays a speed of 300, both in my task bar and in inSSIDer. However, that is usually short lived and the channel for my router reverts back to a single channel and the displayed speed drops to 130 or 144. My neighbor's Netgear is rock solid at displaying dual channels. Well, that and besting my signal strength. :-)
I have the router manually to channel 8 because none of the routers, judged by their displayed strength, use it.So, I guess my question is; how do I stop my DIR-655 from dropping back to using a single channel, which I interpret 20MHz, even though it is set on auto?
View 1 Replies
View Related
Jun 21, 2011
ISP Virgin Media who ship DLINKS without any assistance for custom options, I seem to be having no end of trouble trying to get my DLINK615 and Xbox to play fair.In order to allow me to play my Xbox without any technical problems, or problems with other players I had to open up a few ports, been there resolved that. But, I only want to open them on one IP I want to always be assigned to the Xbox360. This IP being 192.168.0.100
I added that into the DHCP Reservation list, only to find that the Xbox failed to reconnect after being turned off and back on, I believe this is a problem with the DLINK Router, unless I am very badly mistaken.
View 14 Replies
View Related
Dec 9, 2012
We purchased a Dlink 655 for its secure spot features only to very disappointedly discover that feature discontinued. All we needed was a subset of SecureSpot's features.
* Log URL's as issued from selected machines on our LAN.
That is we wanted to see what websites the kids were accessing.
We have spent hours trying to get wallwatcher to work and that is not the solution we are really looking for. We want to the router to have an easy to read URL history, such as we saw online before we bought the DLink 655.
* Does DLINK have any product like this with this URL monitoring feature built in?
View 6 Replies
View Related
