D-Link DIR-655 :: Substitute For SecureSpot Or Roll Back Firmware?
Dec 9, 2012
We purchased a Dlink 655 for its secure spot features only to very disappointedly discover that feature discontinued. All we needed was a subset of SecureSpot's features.
* Log URL's as issued from selected machines on our LAN.
That is we wanted to see what websites the kids were accessing.
We have spent hours trying to get wallwatcher to work and that is not the solution we are really looking for. We want to the router to have an easy to read URL history, such as we saw online before we bought the DLink 655.
* Does DLINK have any product like this with this URL monitoring feature built in?
View 6 Replies
ADVERTISEMENT
Jan 22, 2011
I have a DIR-655 rev A4 with firmware 1.35NA.I read [URL] 5 which stated that the SECURESPOT feature was removed as of firmware 1.35NA but since upgrading the router to 1.35NA I find the following two log entries mentioning securespot being initiated:
[INFO] Sat Jan 22 21:01:21 2011 Initiating securespot services.
[INFO] Sat Jan 22 21:01:21 2011 Allocating securespot services.
I will mention, before upgrading to 1.35NA I was running the stock 1.21 firmware that shipped with this router. Prior to updating to 1.35NA I had taken a backup of the router settings and after the firmware update was applied I restored this settings backup. Could that be the reason this log entry is showing up? It makes me think securespot is not really removed as is claimed in the release notes for this firmware.Can anyone else with a DIR-655 A4 w/firmware 1.35NA confirm the above two log entries mentioning securespot appear in the log (assuming ALL log settings are turned on) when your router is rebooted?
View 2 Replies
View Related
Mar 17, 2012
I downloaded a new image to my ASA 5510 and found out up on reboot that the ASA doesn't have enough memory so I am booting to the "ciscoasa" prompt with no config. I still have my old image in disk0:. How do I roll back to this old image?
View 1 Replies
View Related
Nov 29, 2012
I have a new server that i wish to set as an ISA Server,I've created a new domain on it and set it as a dhcp server.As isa 2006 doesnt work on a 64 bits server what is a good firewall software substitute? My server specs are as follow HP Proliant G7 DL 360 Xeon,12gb memory with a 64bits 2008 r2.
View 3 Replies
View Related
Nov 18, 2012
Anyway to get the EA6500 back to Classic Style Firmware? I know they offered the roll back on the EA4500.
View 1 Replies
View Related
May 25, 2012
I need to roll out a Bluecoat as a WCCP for a ASA 5520.
View 3 Replies
View Related
Nov 13, 2011
I have read that the 3750-X supports upgrading with minimal traffic lost with RSU feature, on the configuration guide the scnario is with the end user connected to the 3750-X stack with LACP and the uplinks to the network running STP, one uplink is forwarding and the other is blocked. I have the same scenario but for the network uplink i also have LACP. When i tried to configured the RU stanby one of the uplink LACP the switch gives an error.
----------------------------- 1-Stck-3750-X ----------------------------
LACP-HOST LACP- Network Uplinks
----------------------------- 2-Stck-3750-X ----------------------------
View 2 Replies
View Related
Nov 25, 2012
I have a Cisco 8510msr that is connected back to back with a 7206vxr across a 155Meg connection.I receive lots of Output drops on the 7206vxr interface facing the atm switch. When I do the following command:-
kwdair9#sh atm int atm 1/0Interface ATM1/0:AAL enabled: AAL5 , Maximum VCs: 4096, Current VCCs: 27 Maximum Transmit Channels: 0Max. Datagram Size: 4528PLIM Type: SONET - 155000Kbps, TX clocking: LINECell-payload scrambling: ONsts-stream scrambling: ON797522 input, 881483 output, 203946630 IN fast, 223768062 OUT fast, 0 out dropVBR-NRT : 110288 Avail bw = 44712 <====
I only have 44megConfig. is ACTIVEkwdair9# I only get 44Meg of the available 155Meg.There is no QOS on the router and the only commands I can find that vaguely see that refer to QOS are on the ATM switch:-
atm address 47.0091.8100.0000.0007.0d87.b201.0007.0d87.b201.00atm router pnnino aesa embedded-number left-justifiednode 1 level 56 lowest redistribute atm-static?why this is acting like a DS3 link and not a 155Meg link?
View 4 Replies
View Related
Dec 4, 2011
What cable I need to connect two 2951 back to back through a HWIC-4T1/E1 card ?
View 1 Replies
View Related
Apr 11, 2013
I have two site that has a copper wire ( 2 wire) connection between each router ( No Telco in between ). Now I want to use 1921 router with HWIC-4SHDSL-E card to connect these two site together. Can I use attach configuration to make the connection reference from the diagram ?
View 1 Replies
View Related
Nov 25, 2011
I have 2650XM router and 2620 Router Both routers have built in WIC T1 CSU/DSU cards
2620Router --
2620Router#sh int se0/0
Serial0/0 is down, line protocol is down
Hardware is PQUICC with Fractional T1 CSU/DSU
Description: DTE side
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, loopback not set
[code]....
My question is that cisco website says there are two type of cable connections for this type of config --which are --T1 CSU/DSU ConfigurationSet one CSU/DSU to clock source internal, and the other CSU/DSU to clock source line. The linecode, framing, data-coding, and timeslots must be set the same on both CSU/DSUs.Four-Wire 56k CSU/DSU Configuration For my network connection which type of config i should use??Secondly i try to connect these ports by normal crossover cable it did not work.So for this type of connection i know i need T1 cross over cable-- which has RJ 48 connections at both sides.I check cable from ebay which is RJ45 RJ48 cross over -- will this cable work in my router to router connection.
View 5 Replies
View Related
Oct 19, 2012
I have 1 2611xm router and 1 2801 router. For my own lab purpose, i want to configure them back to back to support voice services. I don't know what configuration will be required at each end. in 2611xm, i have NM-2V and its also detecting the card, so i hope it will work ? also what commands i need to run on both ends .
View 1 Replies
View Related
Jan 8, 2013
I would like configure two router (e.g. 1921) back to back via a 2 pin copper wire. Can I use HWIC-4SHDSL-E card to do it? What is the configuration I can use?
View 7 Replies
View Related
Feb 9, 2011
I need USA style log. I have a DIR-825 B1 with Firmware Version: 2.05WW. How can I setup (; go back) to the USA 2.05NA version? The firmware upgrade was failed cause that the uploaded firmware file may not be correct..
View 8 Replies
View Related
Apr 14, 2013
I have two site that has a copper wire (2 wire) connection between each router ( No Telco in between )Now I want to use 1921 router with HWIC-4SH DSL-E card to connect these two ste together.Can I use attach configuration to make the connection reference from the diagram?
View 2 Replies
View Related
May 5, 2011
Is it possible to go back to FW 1.34NA from 1.35NA ? I tried all normal methods and got poo-poo'd by the router...
View 1 Replies
View Related
Feb 9, 2011
BRAND NEW DIR 655. Took a bit to get working. Connected at 300mbps beautifully. Then I started to notice I was lagging--I checked my connection speed and it's back down to 130mpbs.I made sure to do WPA2 only, 20/40 range... I don't know what else to do to make it "stick" to the speed I want. It's obviously quite capable of it. If I reboot it it connects at that speed.... it just randomly reverts back to 130.
View 14 Replies
View Related
Apr 5, 2011
I noticed that I'm unsecured what happened We have had many power outages and do not know how to get my WEP code back in do I reset and do all over again Surly their must be an easy way I don''t know?
View 1 Replies
View Related
Feb 29, 2012
Just to get this clear as having issues with a E1 link with CRC's at one.Router A,Network-Clock-Participate WIC 1,Should router B have clock participate for WIC 1? We currently have controllers set as UNFRAMED but guess we can set to NO-CRC4 both ends and telco will pass this.
View 1 Replies
View Related
Jan 7, 2013
I'm looking for instructions on how to setup and connect two RV082 routers together with a crossover cable between their WAN ports. This is to connect two separate LANS together via an ethernet connection. For staging we are setting everything up with a crossover cable in our shop. Ultimately the crossover cable will be replaced by a microwave link between the two LANS several miles apart. There will be no internet connection.
View 7 Replies
View Related
Aug 28, 2012
securing a back-toback connection using E1.The connection is between two cities, using 2x CISCO 1841 router + VWIC-1MFT-E1 interface at each city.
The E1 connections has been provided by our local telco, and they are completely private. The customer is a bank, and they asking me if this is a secure connection or not. If possible, we need to guarantee that no body can get access to the bank network even if they brought E1 modem at one of the ends (telco PoP).
View 11 Replies
View Related
Apr 7, 2013
I searched a lot but couldnt find a clear document about connecting 2 G.SHDSL routers back to back.First of all I am not sure which type of cable (RJ11) is used for connecting two 878 routers. Does it have to be cross or straight cable.
Which RJ11 pairs will be connected each other [code]
According the configuration samples One router must be CPE and the other must be CO for simulating DSLAM.
View 2 Replies
View Related
Dec 25, 2012
I've had the DIR-655 for a few months now, along with a Motorola Surfboard sb6121 DOCSIS 3.0.Modem works fine, the router was working perfectly fine until recently last week.
I have a desktop hardwired and a wireless network going on that I use just for my mobile phone and tablet at times. At first I was having disconnection problems with my wireless, then noticed a neighbor installed a similar router in the area according to my wifi analyzer, so I changed the channels and my wireless started working great. During this process I also did a firmware update and since then I've been receiving some really poor browsing problems, sometimes I'll visit websites like Facebook, or a news website, and it'll say something about the DNS not working, (at this point I'll ping the website and it still pings fine without any loss) so I'll visit the website about 10 minutes later and it works great. I've done extensive research on forums/Google and found it must link up to the new firmware update and something about a DNS relay? My version is: Hardware Version: B1 Firmware Version: 2.10NA
In other words, is there a way I can fix this issue from disconnecting without having to downgrade back to the old firmware? Or is this a common issue they'll continue to happen? If I do downgrade, HOW do I downgrade back to the stable version?
View 14 Replies
View Related
Dec 15, 2011
I'm having some trouble getting two Cisco 888's to work correctly back to back.. The two routers will ultimately be used in conjunction with a BT EPS8 circuit which is effectively four wires short distance between customer sites. We have configured lots of these using the older Cisco 878's.
Anyway, as i've been struggling to get line sync on site I've gone back to basics and connected the two 888's back to back. However, I've found that no matter what I do I can only get the routers to sync at 384kbps!? And that's with a one meter RJ11-RJ11 cable.. Very strange. When we've used the 878's we get much more bandwidth. I have tried statically assigning the line rate at both ends but it still only works at 384kbps.
View 3 Replies
View Related
Jul 14, 2012
I live in a Townhome complex so inSSIDer displays a lot of wireless activity. I have noticed that many of the routers channels are listed as 6 + 2, 4 + 1, etc., while show only a single channel. I have been able to "temporarily" replicate this by setting the Channel Width on my DIR-655, by setting channel width to auto, and when I am successful it displays a speed of 300, both in my task bar and in inSSIDer. However, that is usually short lived and the channel for my router reverts back to a single channel and the displayed speed drops to 130 or 144. My neighbor's Netgear is rock solid at displaying dual channels. Well, that and besting my signal strength. :-)
I have the router manually to channel 8 because none of the routers, judged by their displayed strength, use it.So, I guess my question is; how do I stop my DIR-655 from dropping back to using a single channel, which I interpret 20MHz, even though it is set on auto?
View 1 Replies
View Related
Jun 21, 2011
ISP Virgin Media who ship DLINKS without any assistance for custom options, I seem to be having no end of trouble trying to get my DLINK615 and Xbox to play fair.In order to allow me to play my Xbox without any technical problems, or problems with other players I had to open up a few ports, been there resolved that. But, I only want to open them on one IP I want to always be assigned to the Xbox360. This IP being 192.168.0.100
I added that into the DHCP Reservation list, only to find that the Xbox failed to reconnect after being turned off and back on, I believe this is a problem with the DLINK Router, unless I am very badly mistaken.
View 14 Replies
View Related
Dec 18, 2011
I have not yet hooked up my router, N150. What I would like that after I hook the router up and then deside I don't want to use it. How do I disconnect it and go back to using my DSL modem and being connected to the internet?
View 3 Replies
View Related
Jun 30, 2011
I've had my DIR-601 for almost a year now and it's been working near flawlessly until just recently. I have a very simple setup with a desktop PC, router, Time Warner cable modem, and the only device that accesses the router is my Droid phone. I shut my PC down every night. The next day when starting up my PC, there's no internet connection. I haven't fooled around with any router settings, but what I've been doing to re-connect is unplug the cable modem power cord and router power code, wait a minute, then re-plug them back in and it connects right away. Is there something easy that I can do/repair to correct this? Maybe I should check if there are firmware updates?
View 1 Replies
View Related
Mar 25, 2011
Can you use the NA firmware on an EU firmware device?I assume yes, since the hardware is the same?What's the difference between the two?
View 14 Replies
View Related
Aug 7, 2011
Just updated to the 1.01 firmware on my DIR-815 and now it doesn't handle loopbacks anymore.
For instance, I have a dyndns address of ericnewton76.dyndns.org. This points to my router. Works fine if you're NOT within the router's internal network, ie, outside hosts can get in just fine (try it... http:// , you'll see an IIS7 welcome screen)
However, when INSIDE the network, the requests don't get connected properly, and they used to... ie, I work with code, so my svn repo is at ericnewton76.dyndns.org/svn but inside my network it doesn't connect properly anymore (whereas it used to before firmware update)
So now I wish I could back-peddle to 1.0 firmware.
View 6 Replies
View Related
Jun 6, 2011
he will lose connection with his chat programs for like 2 minutes then automatically be signed back on. He says he notices no other connection loss, but notices that sometimes his streaming will lag or games will lag. His ISP is Armstong (?) and he's wired to the router. XP OS.
View 3 Replies
View Related
Sep 5, 2011
I use a D-Link DWA-552 Xtreme Wireless-N PCI adapter on my Windows XP Home SP3 desktop computer that has been working flawlessly for months, until last night when it suddenly stopped being able to connect.I was just on the web last night doing what I normally do, and all of a sudden out of no where I lost internet connection and I couldn't get it back. I've tried resetting the router downstairs, I've tried restarting and shutting down the computer, and did three system restores (that all failed anyway), and none of these things are getting my connection back. Now also for some reason I can't even open up my network adapter's wireless network manager anymore because it closes itself not even a second after I boot it up.The modem and router downstairs look perfectly fine and all the other computers in the house, even the laptops, can all connect but mine, so something must be up with my network adapter.
View 14 Replies
View Related
Jun 12, 2013
I have a router that needs to be reset to get the internet speed back to a usable speed. It is a fairly old router (D-LINK DSL 2730B) and it does get quite annoying. There is allot of devices connected, which may affect the speed, but I am sure it shouldn't change upon reboot. I literally reboot every hour or 2 during peek periods.
View 1 Replies
View Related
