Cisco Wireless :: 8500 - Code Downgrade From 7.4 To 7.0
Jun 11, 2013
Working on a project consolidating all controllers to a single 8500 controller with a standby. Moved an AP over to test the process and everything worked fine. Took a little longer than I thought it would, but given the design with new flexconnect abilities, the creation of AP groups well you know.
I get the AP over and one of my ssids doesnt work because the key is different, so gotta move the AP back over to resolve production issues.
when downgrading from 7.4 to 7.0?
View 6 Replies
ADVERTISEMENT
Feb 19, 2013
I have been searching through the cisco docs for a while and i just cant seem to find this info. Can I run aironet 1600's with my wism running 7.0.116? Also, could I run my 1130 series ap's with a wism2? Basically, what is the minimum code level for a lightweight 1600, and what is the maximum code level for a lightweight 1130?
View 3 Replies
View Related
Feb 20, 2013
Does the 8500 support any SMOF SFPs? data sheet only talks about a MM based SFP.
View 15 Replies
View Related
Apr 11, 2013
Is it possible to enable load balancing for a particular group of APs and disabled for the rest. Perhaps AP groups. Running 8500 WLC with 3600 series APs. It will enhance the service concurrent user capacities for areas with a high device count.
View 4 Replies
View Related
Oct 26, 2011
hp office-jet pro 8500 won't work wireless = wants wpa security. I don't know what it is.
View 3 Replies
View Related
Jan 24, 2013
Does the 8500 support any SMOF SFPs? data sheet only talks about a MM based SFP.
View 6 Replies
View Related
Mar 26, 2013
Are there any plans to support the "converged wireless access mode" on the 8500 controllers ? Don't want to buy this $$$ controller to throw it away in a couple of months when 3850 switches will start appearing and require local termination...
BTW: will the 3850 ever support just plain pass-through for wireless ? The local termination is a PITA because i will need to replace my WiFi AP at the same time i replace my access switch since current AP are not supported on 3850.
View 4 Replies
View Related
Nov 23, 2012
I have a XPS8500 with Win7 64bit and last week entered internet via wlan without problems. After an automated update I get a "limited connectivity" despite excellent signal strength. If I restore the system to 15:16 settings, everything works fine. However after a restart I am confronted with "limited connectivity" again.
View 1 Replies
View Related
Jan 31, 2013
Periodically I will loose internet connection even though when I click on the wireless applet in the tray it says connected. If I disconnect and re-connect it will work fine for a few hours. Takes all of 20 seconds to do. Any problems with 1703 wireless card? Have installed the latest drivers.
View 3 Replies
View Related
Jun 13, 2013
The wlc config guide of Release 7.4 states that sticky key caching (usefull with apple devices) is supported at AP in local mode. [URL]I am testing the new WLC 8500 with 7.4.100.60.
AP mode = FlexConnect
The wlan i activated skc is centrally switched.I debugged the iPhone (4S) roaming.I think skc works at centrally switched vlan on flexconnect APs.
*apfMsConnTask_1: Jun 14 14:15:17.069: 30:39:26:2c:d3:ee Reassociation received from mobile on BSSID 00:16:9c:ba:a9:b6
*apfMsConnTask_1: Jun 14 14:15:17.069: 30:39:26:2c:d3:ee Global 200 Clients are allowed to AP radio
*apfMsConnTask_1: Jun 14 14:15:17.069: 30:39:26:2c:d3:ee Max Client Trap Threshold: 0 cur: 23
*apfMsConnTask_1: Jun 14 14:15:17.069: 30:39:26:2c:d3:ee Rf profile 600 Clients are allowed to AP wlan
[code]....
View 4 Replies
View Related
Mar 12, 2012
I have a Dell Inspiron 8500 Laptop with the Dell Truemobile 1300 WLan mini PCI Card.I have tried uninstalling and re- installing the Driver from the Dell website. I have install Network Stumbler and it keeps saying "No Aps Active.I Have MZC and Dellwirless turned off so that they will not conflict with NS.I have tried the FN + F2 keys and neither worked the FN and other keys work just fine.I have just completed a fresh install of Windows XP Pro as the old OS got corrupted.
View 4 Replies
View Related
Jan 24, 2012
I am attempting to add my HP Officejet Pro 8500 wireless printer to my HP elite book. The printer is showing up in control panel as being my default printer. It is showing up as being offline, even though the drop down menu does not show it as being offline. No printers are listed in the device manager.
View 3 Replies
View Related
Apr 11, 2013
I have a Dell XPS 9100 system which has a Dell Wireless-N 1525 PCIe WLAN (a/g/b/n) card which I would like to transfer into my new Dell 8500 which comes with a Dell Wireless 1703 WLAN (g/b/n) half minicard. This is because the Dell 1525 is dual band and is faster than the Dell 1525. I would like to get the procedure for installing the Wireless-N 1525 PCIe WLAN card into the XPS 8500 (and replacing the 1703 half minicard).
View 9 Replies
View Related
Dec 22, 2012
i have 2504 with software 7.2.103.0 and i want to downgrade to version 7.0.235.3 , but i face problem after the TFTP Transfer complete and display this erorr messagges:
- Sanity check failed on file. The file was not downloaded completely!
- TFTP Failure while storing in flash!
i will attache file contains " debuge transfer trace enable " while i transfer the software.
View 10 Replies
View Related
Mar 13, 2013
Some time ago I updated a WLC, model 2504, from version 7.3 to 7.4.100.0. I also update the FUS (Field Upgrade Software) to the latest release, 1.8.0.0. Now I need to downgrade the WLC back to 7.3 version.
My doubt is: Can I just take the normal processes and downgrade the WLC back to 7.3, even with the FUS in version 1.8.0.0?
View 5 Replies
View Related
Mar 18, 2013
I had a 2106 running 4.x software. It was upgraded to 7.x but will not read the config. How to downgrade the software?
View 4 Replies
View Related
Nov 12, 2012
I have to prepare an 3600 Capwap AP for autonomous functionality!
The following image was downloaded: ap3g2-k9w7-tar.152-2.JA
The release notes say: Site-Survey Only Mode for 3600, 3500, and 1550 Access Points You can install Cisco IOS Release 15.2(2)JA on Cisco Aironet 3600 and 3500 Series access points and on 1550 series outdoor access points to perform site surveys. This release runs on these access points with limited functionality. You can manually adjust these settings on the site-survey access points:
• Channel on each radio
• Transmit power on each radio
• Enable and disable the radios
• Manually set basic and supported transmit rates
• Enable advertised cell power in beacons to client to enable DTPC for doing active surveys
• Enable and disable SSID broadcast in beacons
• Enable open authentication
My Question is: Where can i find a instruction for downgrading an AIR-CAP3602i to Autonomous 3600 AP? Is it complicate to get the AP running, or what do i need for "downgrading"?
View 4 Replies
View Related
Nov 14, 2012
I would like to downgrade Cisco Aironet 1142N to autonomous. But I would like to know is there any way to download the LWAPP IOS before upload the Autonomous IOS ? because I want to upgrade the 1142N from autonomous to LWAPP when I buy a LAN Controller.
Is that possible to use that backedup LWAPP IOS when I want to upgrade the Cisco Aironet 1142N autonomous to LWAPP?
View 8 Replies
View Related
Jan 24, 2013
I have downgraded one of our AP1142N-E K9 to Autonomous mode with this image: c1140-k9w7-tar.152-2.JB.tar I have uses cisco's instructions.
After successfull installation, I can open the Webinterface, but it shows almost no information. Only Device Type end serialnumber, but nothing more. Also it is not possible to save any configuration.
Alternatively I have installed:
c1140-k9w7-tar.124-21a.JA1.tar
Same problem. I have tried it with a LAP1252N later. Same problem.
View 2 Replies
View Related
Dec 13, 2012
provide me with the latest (or one) release of 1.1.27 firmware for the EA6500. I am deeply disappointed in the last firmware upgrade and due to security and sudden lack of certain, or let's say all, functionality in bridge mode I need to downgrade or wait for an upgrade where that's fixed, but most likely not soon, or ever. Where could I find the firmware downgrade.
View 2 Replies
View Related
Jun 21, 2010
I need to downgrade my WRT160n so that it will work with Xbox LIVE again. I've been told by Xbox that the only certified working firmware for my router is 3.0.02.003, But I'm using 3.0.02.004.
View 9 Replies
View Related
Oct 20, 2012
I'm in the process of wanting to upgrade my wireless network but I'm not really agreeing to the Cloud Connect, I don't need to have my settings on the internet. I want to manage everything on my own. I've found the following link on the community to be able to put the classic firmware before the cloud connect feature {URL}.
My question now is : If I buy a brand new EA4500, will it still be possible to downgrade to that firmware? No problem with this one? I'm hoping Cisco will continue to publish bug fixing if any to this classic firmware.
View 5 Replies
View Related
Aug 25, 2010
upgraded my home AP from Autonomous to Lwapp. I was an Idiot and thought i was getting an IOS upgrade. I need to revert it back to autonomous and a simple "mode" button reset doesnt work. I read that I need to Reload original IOS software, but It appears I cant get it without a support contract. I cant afford servicenet and need to obtain old ios to revert to factory default 12.4(10b)JA1. Do I need a contract to roll back? Is there an archive (backup image) of the old IOS that could be still stored on the device. I didnt back it up and need to obtain the image.
View 5 Replies
View Related
Feb 25, 2012
how to downgrade/upgrade AIR-LAP1142N-N-K9 access point to autonomous mode, because i don't have controller. i'm not able to login to access point as its in Leightweight mode.
View 4 Replies
View Related
Jan 6, 2011
I would like to confirm if it is possible to downgrade AP 1042 from CAPWAP to autonomous? I want to buy the AP model AIR-LAP1042N-A-K9. But i don't sure if in the future it could support this feature.
View 9 Replies
View Related
Aug 6, 2011
This seems to be an epidemic issue with LinkSys routers (with me myself running in the third such issue).This time, I would require the original firmware of the WRT54 ver. 4 series. Download links in older threads have 404d already.
View 1 Replies
View Related
Nov 15, 2006
Last night I upgraded my WRT54GX2 from 1.0.11 to 1.0.14, hoping to resolve some wireless connection issues. It did not work. It made something else break.
View 9 Replies
View Related
Mar 3, 2013
The last shipment of 3602 APs for a customer came with 7.3 software. Controllers are running 7.2.110.0 so APs had to be downgraded. After APs finished downgrading they were still up. When we moved the APs to another controller running 7.2.110.0 they would not come back up. Power was denied at the switch.
View 2 Replies
View Related
Feb 17, 2013
Region : Hongkong
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 120405
ISP : Netvigator Broadband (18Mbps ADSL)
I'm having a problem with my TL-WR1043ND becoming non-responsive after a few days of uptime.This is actually my second 1043. I bought it because my first one (hardware version 1.4) has been rock solid -- I've not had to reboot it for over 2 years. (I don't have its firmware version handy at the moment, but I recall it's from 2010.)I needed this new router for a second location, but it has not been functioning correctly. It is hardware version 1.10 and shipped with the latest firmware, 120405. is it safe to downgrade the 1.10's firmware to the one that's running on the 1.4? Or is the hardware sufficiently different (e.g. different bootloaders)
View 2 Replies
View Related
Apr 3, 2013
I have a nest in the house and upgraded my router because nest is very picky with what routers it works with..something to do with power save mode and NAT settings Read here.well the linksys was working just fine with the nest until I upgraded the firmware to the smart wifi thing...it's a EA2700 btw.
View 3 Replies
View Related
Apr 11, 2013
i have a Dell XPS 8500 with windows 8, Currently it's connected to the modem by ethernet cable Currently i have cable broadband which is fast normally occasionally it's slows for no reason i have done a diagnose test on the connection which came with the following results result of the test came out with the following which i am quoting exactly as it show's on my computer "your computer appears to be configured correctly, but the device or resource(DNS Servers) is not responding"by the way connecting to my router through wifi is not much of improvements?
View 7 Replies
View Related
Jan 11, 2013
New Dell XPS 8500 connected to Gigabit port on BT Home Hub 3.Connection shows 1Gbps. Accessing web sites is very slow.connect to 10/100 port and web access is fine.Old Dell Vostro 220 connected at 1Gbps and worked fine !
View 4 Replies
View Related
Sep 29, 2012
I am having a very frustrating problem with my new Dell XPS 8500's wireless connection - Dell Wireless 1703 802.11b/g/n (2.4GHz). Basically, I am losing my network connection every couple of minutes. The process goes something like this:
1) Not connected - Connections are available
2) My network disappears completely (yet all other local networks are still visible) for a matter of seconds then reappears
3) I try to connect and receive "Windows was unable to connect"
4) I press "Troubleshoot problems"
5) "Resolving problems", "Resetting network adapter", "Troubleshooting has completed"
6) Problem with wireless adapter or access point - Fixed
7) I am reconnected to the network/internet with a full 5 bars
8) Process repeats itself five minutes later
I have been able to come to a conclusion that is not the adapter, or the router, but some sort of compatibility issue as:
a) I have tried connecting to a different wireless network and it has worked fine
b) There are other systems in the household that connect to the network and are not experiencing the same issue
It is not a distance issue as router is 2 meters away from the adapter with nothing in between, the other systems that use the network are much further away.
What I have tried so far: - Changing the channel from "Auto" to a set number
The router is a Belkin N300 Wireless N.
View 12 Replies
View Related
