I have a nest in the house and upgraded my router because nest is very picky with what routers it works with..something to do with power save mode and NAT settings Read here.well the linksys was working just fine with the nest until I upgraded the firmware to the smart wifi thing...it's a EA2700 btw.
View 3 RepliesI have configured my new EA2700 successfully, upgraded the firmware to Smart Wi-Fi, can access it locally and configure anything as expected.
However, when I log on with my (validated) Smart Wi-Fi account, I am always stuck at this page (see screenshot below):
- Logon to [URL] works fine
- The I am redirected to this page
- Now I can only click OK
- Logon again to [URL] --> start over again...
The firmware is the latest version 1.1.39.145204 and no other updates are found. I tried IE and Firefox --> same result.
This seems to be an epidemic issue with LinkSys routers (with me myself running in the third such issue).This time, I would require the original firmware of the WRT54 ver. 4 series. Download links in older threads have 404d already.
View 1 Replies View RelatedLast night I upgraded my WRT54GX2 from 1.0.11 to 1.0.14, hoping to resolve some wireless connection issues. It did not work. It made something else break.
View 9 Replies View RelatedI have an EA2700 which I am trying to rollback to the older interface, however it errors out every time I try to install the firmware.All I ever get is this message: Unexpected Error The firmware update did not complete successfully. Please try again later.We've encountered an unexpected error. If the issue continues, please visit our Technical Support site.I've reset the router multiple times, powered it off overnight, re-downloaded the file multiple times, and am still unable to successfully rollback. Sometimes it even errors out when I try to set the password on the router itself and I have to reset it again before I can use the interface.
View 9 Replies View RelatedGot the EA2700 router and got the blinking defective firmware light right out of the box
View 3 Replies View RelatedAny direct download of the EA2700 firmware upgrade. My inet is not dsl or cable and will not let the wan port connect, therefor the "auto firmware update" will not work. I'd like to update it and see if it fixes it before I return this for a dlink. url...Anyways, I just want the firmware link so I can decide if this thing is going back to the store or not.
View 1 Replies View RelatedI recently updated the firmware on my BEFSR81 v3.1 but would now like to revert to the previous version.
Where I can find the earlier version? I've got 2.51.4, build 006 Aug 21 2009 and need the one before.
It's not a critical problem, but more of an annoyance. I power everything here off one big switch which goes off overnight. Before the update I'd just switch it all on in the morning and everything would, after a minute or so, work fine. Now, however, I have to power up the router a minute after the modem or it just sits there doing nothing. That's OK when I'm here, but if it's just the wife she can't reach the back to do it.
I just setup my new Cisco EA4500 and upgraded to latest firmware and signed up for my account.Local access to the router works fine and I see the Smart Wi-Fi admin/config interface However when I try to go to the following site: url...To access Linksys Smart Wi-Fi Tools, your router <em>requires</em> the <a href="url...Series Linksys Smart Wi-Fi Firmware</a> and you will need to associate your router with your Linksys Smart Wi-Fi account.On a computer or device connected to your router, open url... and follow the instructions. This requires that you enter the router password so have that ready.
However I see no way to perform the association step - my account exists and my router is configured.I am doing all this behind this router wi-fi network not remotely.
Region : Hongkong
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 120405
ISP : Netvigator Broadband (18Mbps ADSL)
I'm having a problem with my TL-WR1043ND becoming non-responsive after a few days of uptime.This is actually my second 1043. I bought it because my first one (hardware version 1.4) has been rock solid -- I've not had to reboot it for over 2 years. (I don't have its firmware version handy at the moment, but I recall it's from 2010.)I needed this new router for a second location, but it has not been functioning correctly. It is hardware version 1.10 and shipped with the latest firmware, 120405. is it safe to downgrade the 1.10's firmware to the one that's running on the 1.4? Or is the hardware sufficiently different (e.g. different bootloaders)
provide me with the latest (or one) release of 1.1.27 firmware for the EA6500. I am deeply disappointed in the last firmware upgrade and due to security and sudden lack of certain, or let's say all, functionality in bridge mode I need to downgrade or wait for an upgrade where that's fixed, but most likely not soon, or ever. Where could I find the firmware downgrade.
View 2 Replies View RelatedI need to downgrade my WRT160n so that it will work with Xbox LIVE again. I've been told by Xbox that the only certified working firmware for my router is 3.0.02.003, But I'm using 3.0.02.004.
View 9 Replies View RelatedI'm in the process of wanting to upgrade my wireless network but I'm not really agreeing to the Cloud Connect, I don't need to have my settings on the internet. I want to manage everything on my own. I've found the following link on the community to be able to put the classic firmware before the cloud connect feature {URL}.
My question now is : If I buy a brand new EA4500, will it still be possible to downgrade to that firmware? No problem with this one? I'm hoping Cisco will continue to publish bug fixing if any to this classic firmware.
i just thought i would try 1.35na firmware and i decided i wanted to go back to 1.33na, well you cant BE FOREWARNED.
i don't know what is the big deal about stopping you from downgrading your firmware that they lock you out of it. it never used to be a problem, pretty sure i could downgrade from 1.34na to other 1.3 firmware.
the reason for allowing people to downgrade is incase the new firmware does not work properlly. not allowing your customers to do this is just asking for trouble not to mention alienating your customers.
at work we downgrade firmware to the firmware that passed our quality tests, it also makes it easier to support them when they are all the same.
1.35 works well so i dont have to buy another router. if it doesn't you can be sure it wont be another dlink thats for sure.
I purchased a DIR-655 (A4) a few weeks ago, and was encountering a problem. I immediately upgraded to 1.35NA after I bought it. First, the actual problem: With WMM enabled, my internet speeds are very inconsistent. By that, I mean it will fluctuate between full ISP speed and less than half the speed. A few seconds at full, a few seconds at half or less, and so on. Well, when I disable WMM, with everything else the same, the internet speeds suddenly become consistently fast at full speed, but PC-to-PC (LAN-to-LAN) wireless transfers slow down considerably. So no matter what I do I get a negative result.
Thus, I figured I would try downgrading the firmware to 1.32NA, 1.33NA, or 1.34NA, as I read that it is not possible to downgrade directly to 1.2x. I thought I would simply troubleshoot the problem myself. Unfortunately, no matter which firmware I try, except 1.35NA, it gives me a paragraph explanation; something like "This file was either not intended for this router, or it is corrupt. Your router will not be programmed." It did allow a reflash of 1.35NA, though. I downloaded multiple firmwares directly from the D-Link ftp multiple times, using a different router, so the files should not be corrupt.
Is it simply not possible to downgrade once you flash 1.35NA? For the record, I also tried a few of the workarounds I found on the internet: (1) do a hard reset by holding in the reset button and cycling power for 30 secs. (2) I tried some firmware directly from the German FTP which was supposed to allow a downgrade, but still got the same error as above. (3) I also tried some Russian firmware and it didn't work either. I was using a hardwired connection to the router during all attempts to flash.
i got an ea2700 and i cant get the external to work internally which i need for server tests now this has worked before on every other router i had without any editing done but this one doest allow that so what can i do to make it work with this router?
View 9 Replies View RelatedI recently purchased an EA2700 to replace an old Belkin. I ran the set up CD and I am unable to establish an internet connection. I am able to connect to the router (both wired and wireless), ccess the settings, etc but cant reach the net. I've tried turning off the firewall, flushing the DNS, disabledthe IPv6. Did all the basic steps, resett the modem/router, etc...nothing. i hook the Belkin up and it connects just fine
View 9 Replies View RelatedI have EA2700 Router which support to be a dual-band wireless router and I am trying to connect to my router using 5 Ghz band with AE2500 Dual-Band Wireless-N USB Adapter, I am only seeing 2.4 Ghz wireless band plus even if I manually enter my 5 Ghz SSID my network adapter still wouldn't work on 5 Ghz band. Is there any specific set up in order get 5 Ghz band to work?
View 3 Replies View RelatedMy first issue with this device is when I try to untick NAT to disable it I lose my internet connection. This also disables access to router's address 192.168.1.1 forcing me to reset the device and set it up all over again. Why is this happening? I tried this at least five times with the same result. Second question I have is if the DHCP reservation is the right option if I want to forward ports for certain applications like Vuze? When the DHCP reservation window opens I see all my wireless devices in the list (laptop, phone) but not the main computer which is connected through ethernet port. But that is yet another problem.
I've got a cable modem, connection is set to Automatic DHCP and I all want is to disable all firewalls, NAT and other unnecessary protection that's slowing my internet speed, set up MAC address filtering, port forwarding and close this terrible software so I never have to see it or think about it ever again.
i have a EA2700 router and I'm connectied wirelessly to my PS3. If i am not hosting a game i will be lagging all over the place yet it says i have full connection to majority of games that i connect to. i paid 115 dollars for this router and am very dissapointed that its doing this. Also no there is no way for me to connect wired to the router it is to far away. Also i tried bringing my ps3 to my friends house and played on his wireless connection and it worked perfectly so its deffinetly my router.
View 3 Replies View RelatedEA2700v1 WPS-PIN using 5GHz does not work. This router includes WPS header in its 5GHz beacon and probe response but the router removes the WPS header from them once WPS-PIN starts. There is no problem with WPS-PIN using 2.4GHz.
View 1 Replies View RelatedI want to change password in my EA2700 but don't know how to do it. How to change password in EA2700?
Looking for [url]
Find the best [url]
I am not able to access the web interface of the router.No, i am not using cisco cloud or smartlink .. yes, it has the latest firmware (Ver.1.0.14.129982).Yes, I might be able to get to it if i shut down the router and turn it on again a few minutes later, but the problem is.. why? why do i have to interrupt connections and not have internet to log into the admin web interface of this device? Is there a known problem with it that makes the webservice go down?.. or to take extremely long to respond and thus the browser to quit on it throwing an error?
View 3 Replies View RelatedIm not able to conect to the internet threw my router, but i am able to with my modem. i dont want to pay for a new one and Cisco wants me to pay $30 for phone support.
View 9 Replies View RelatedIs there a way I can downgrade the firmware on a C3750 v2 switch 24TS-S v07 to 12.2(35) SE5. I have added this new switch to an existing stack but the FW is not compatable. I believe the answer is to upgrade the rest but I cannot afford any down time as they are used to run a CCTV securiy network 24/7. I have included details below to assist with my problem. Switch 4 is the one with a version miss match.
LNB-SWI3750-CTR-01#show verCisco IOS Software, C3750 Software (C3750-IPBASE-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2007 by Cisco Systems, Inc.Compiled Thu 19-Jul-07 19:15 by nachenImage text-base: 0x00003000, data-base: 0x01080000
ROM: Bootstrap program is C3750 boot loaderBOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(25r)SEE4, RELEASE SOFTWARE (fc1)
LNB-SWI3750-CTR-01 uptime is 19 weeks, 3 days, 22 hours, 46 minutesSystem returned to ROM by power-onSystem image file is "flash:c3750-ipbase-mz.122-35.SE5/c3750-ipbase-
[code]....
My new EA 2700 disconnects from the internet if the desktop is idle for more than 30 minutes. needs to be unplugged for a few minutes then it will reconnect. This is an unacceptable situation and this thing will be tossed if it cannot be fixed. Can this be reset so it won't disconnect? or do I need to replace it with a product from another company?
View 1 Replies View RelatedI have an Cisco EA2700 router and a Motorola SB6121 modem. If I'm connected to the router wirelessly or through any of the lan ports, I can't visit the modem's diagnostics page at 192.168.100.1. If I connect directly to the modem, it works fine. Also I cannot ping the modem through the router, just get a timeout. My ISP is Comcast.
View 9 Replies View RelatedI have tried all the speed test sites and tried downloads with and without my EA2700. Every test shows about half the perfomance when connected through the router. My speed tests at speedtest.net with a direct connection are in the 21-26Mbps range, the same tests run about a minute later through the EA2700 fall in the 10-12Mbps range with spikes up to 17Mbps.I've reset the router and modem.I've gone back to the 1.0.14.129982 Firmware (which it's currently on)I've set the MTU everywhere from 1400 to 1500 (literally EVERY setting for at least a couple of hours) it is 1492 currently. None of these have worked. In addition, when a large stream starts, such as a Steam download, I will lose ALL connectivity. Going in to Network and Sharing and clicking to connect to the internet restores the connection, no need to reset any hardware (which is odd in itself). I have had MANY routers over the years and I've all but exhausted support with service provider as the connection is solid if I eliminate the router.Main machine is a Windows 7 Home edition Total of 5 machines, 3 of which see regular use All machines go through a Trendnet 16 port switch and performance is the same direct or through the switch I m on Brighthouse in Central Florida and have all but exhausted their support.
View 4 Replies View RelatedI recently bought an EA2700 in hopes that it will make my connection faster, stronger signal and stable. However, this is not the case. The connections keeps dropping and the range is the same as my Verizon-FiOS router. Anyway, I'm hoping that a fix be distributed to address this issue. I can't return my router to the vendor anymore.
Now, since I have two routers, I want to be able to leverage EA2700's dual-band feature and the Guest-access feature but I can't make this as a main router since my FiOS router should still be able to supply IP addresses to my cable boxes, thus, I can't configure it as a Bridge. I'm thinking if I just split the IP distribution as follows:
FiOS router: 192.168.1.2-110
EA2700: 192.168.1.111-150
I have a linksys EA 2700 with the latest smart wifi firmware. However, the "Release and renew" of the IPv4 internet ip is greyed out. Only IPv6 is enabled.
View 1 Replies View Relatedwent through setup twice, double checked connections, bought new ethernet cable from router to computer, still not connecting. However when i go from my modem to computer i get connected. could i have a faulty router. the router is new from walmart the ea2700.
View 1 Replies View RelatedEvery time after the router (Linksys EA2700) is powered off and restarted, there is no interent access available. The router configuration status reports an Internet Address of 0.0.0.0 and all the devices at home are left with a wifi without Internet access. I have to unplug the WAN from the router and plug it in again while it is turned on to restore internet access (and a normal Internet Address is seen from the status page). The WAN works fine with the routers I had previously. I wonder if I have to perform this every time I power on the router. I have tried resetting the router and reinstalling Cisco Connect but that didn't work.
View 3 Replies View RelatedI have a EA2700 and will try to reserve an IP address to a PC, but getting up that address is invalid.I already have two reservations, which is 192.168.10.10 and .... 50, I try to reserve ...... 20 but am getting alert that this then is "Invaldi IP".
View 9 Replies View Related