Cisco VPN :: How To Downgrade To 2.5.3055 From 3.0.08057 On Mac OS 10.7.5 Lion
Dec 3, 2012
I'm using the Cisco AnyConnect VPN Client (2.5.3055) to connect to a server "A". It has worked fine. Then I tried to connect to the server "B" from the free university of Berlin and then this installed (3.0.08057) automatically without asking. Connecting to server "A" does not work any more. The error message is: "The AnyConnect package on the secure gateway could not be located. You may be experiencing network connectivity issues. Please try again." So I tried to de-install the client with the shipped uninstaller and installed the previous 2.5 client again. but the Error message is still the same.so which files should I remove/edit to get it working as before. The network is OK, I tried it on a other computer under Windows Vista and there the freshly installed Client works fine. So I guess ther must be some files or configurations from the newer version in the way.
I have a small network of computers and printers in my tax office and consist of three computers running in window xp professional, one computer is designated as the server workstation and the c drive is the share drive and the other two work stations are mapped to the share drive c on the server workstation . so i am using peer to peer networking and these three computers are connected by a seven port router and two other printer are attached to the router also. i am having a problem printing from the computers to these printers, one is a hp laserjet 4200 and another is a hp laserjet all in one 3055.
In the past i just click and i would print, but a few day ago when i click print from either workstation it would que it to printing but it would have a message that it could not find my printer on the network. dont know why it all of a sudden stop working. do not know anything about setting up a printer on a network. do note the printers are connected to the router and not directly to the server workstation computer via usb. So the two workstation and the server workstation have the printer software on the C drive of each computer but for some reason it could not find the printers on the network. How to network a hp laserjet 4200 and Hp laserjet 3055 in a network that is connected by by one seven port router. why is the printers not in the network?
Windows clients work fine. When loaced from safari in Mac OS, it also works fine. -- If I browse to the url, like vpn.xxx.com/profilename, I can login and anyconnect will start and connect automatically. Only when run from applications > Cisco > Cisco Anyconnect Secure Mobility Client, I will get this failure. Is this a configuration issue?
We have a problem with a manager who has upgrades his Mac to the latest Lion OS (64 bit), before uograding he could connect without any problem with his mac to our network and work on the terminal server. Since the upgrade he's not able to get it working in 64 bit (normal) mode.
I am currently have a Cisco 881 router running EasyVPN server. I recently created come IPSec rules that allow trafiic to specific IP's for a specific security group:
access-list 105 permit ip host 10.1.0.5 any access-list 105 permit ip host 10.1.0.15 any access-list 105 permit ip host 10.1.0.16 any access-list 105 permit ip host 10.1.0.32 any
This works as expected with our Windows users, however our Mac users (using native VPN Client) can only reach the FIRST ip in the string of access statements. When I was torubleshooting this, I moved .32 as the first statement and I could only reach it and none of the others.
I have a Cisco ASA 5510 8.2 (3) with clientless SSL VPN portal enabled with some bookmarks pointing to internal servers. I just installed a new Mac OS Lion Server 10.7 box and have a share on it using both AFP and SMB. My old Mac server is 10.6 with a similar share with both AFP and SMB enabled. When using the Portal browser (or bookmarks pointing to cifs://example/server), I get an error "Error contacting host" to the the 10.7 box, but browsing to the 10.6 box works fine.
I have double checked all settings on the 10.7 and permissions, everything appears correct. I can also browse internally via SMB from Windows XP/Windows 7 using default UNC paths \exampleserver, etc., to the 10.7 box.
From what I have read, the 10.7 has a completely different design to the SMB versus the earlier 10.6. [URL].
so i have a printer attatched to my mom's computer and it's set up for sharing. i can get to the printer through my macbook, but it's asking for a username and password to the network (which it didn't ask me to do when setting up the sharing settings on the windows pc) what do i need to do?
I recently bought a dell v313w and I finally managed to configure the printer with my mac via wifi.
I'm still very disappointed because I just can't figure out how to scan from my v313w to the mac as it doesn't appear in the possible destination hosts.
I'm with one problem, my OS Lion don't authentication in the Secure ACS Version: 5.2.0.26.10.For the Mac Lion operating system to work you must put in execeção the MAC Address of your computer. I wonder how it could cause the OS to authenticate the ACS Lion.
802.1x authentication on their Cisco Wifi network using Macbook Pro/Airs running Lion.
We have.. 2x Controllers with WiSMs running 7.0.116.0 A mixture of 1131 and 1142 APs.. ( APs mainly in HREAP mode with some APs located on the same local network as the Controller in Local Mode ) Macbook Airs/ Pro running Lion
[URL]
In summary, we are finding that when our MacBooks are coming out of sleep/standby or roaming between APs, the devices get stuck during the 802.1x authentication process and will either get the self assigned 169 address or continuously try to authenticate.
This can occasionally be solved by turning the wifi interface off and on or manually stopping and starting the 802.1x process on the Mac
From reading various online forums, we have tried the following to resolve this..
- Disabled WPA across our wifi network as we don't use it anymore.. We now just use WPA2 with AES and Dot1x authentication.
- Disabled Client Load Balancing on the SSID configuration… this does not seem to have made things any better or worse although we are seeing more Load Profile threshold notification alerts for some of our APs which are used heavily.
- The 802.1x time out is currently set at 20secs.
- Some APs which are in Local mode ( due to them being on the same local network as our wifi controllers ) have been changed to HREAP mode and assigned a static IP address.. We found that this was required at our spoke sites where we were originally experiencing issues with our old Windows based devices.. Incidentally, we have not experienced any of these delayed authentication issues with our Window laptops, all our problems seem to be with our MacBooks running Lion..
As I mentioned earlier, there seems to be many discussions online regarding problems with the Lion OS and 802.1x authentication..
get a status on Mac Lion and/or Windows 7 64-bit SSL VPN support for the RV220W? QuickVPN (for Windows 7 64-bit users) and IPSecuritas (for Mac Lion users) are our current workarounds, but for folks that use/own their own equipment we prefer SSL VPN. This is why we retired our WRVS4400N v2 for the RV220W.
I've been developing Node.js apps on my localhost on port 1337 for last two years with no problem as shown below.
$ node app App started on port 1337
Today I wanted to test how things go with default port 80, so I did:
$ sudo node app App started on port 80
But after that my network went crazy. Now I can't access any local address including localhost. When I ping to localhost it points to some weird public IP address (218.38.137.125) instead of 127.0.0.1.
I've just bought an E2000 and I Cisco Connect doesn't run on OSX-Lion, and I was unable to find it on support downloads. But this is only a comment, my concern is that I'm not able to see on main menu how many DHCP clients are connected nor of course to check their traffic. Other routers usually provide at least DHCP clients
Apparently the setup cd does not work with Mac OS Lion. Anyone else out there is using this router on a Mac running Lion...if so, how did you set up the router.
I just purchased a new E4200 router. When I try to set it up, , it says that my software (Lion v. 10.7.2) is unsupported. Is there a download that will allow me to use this router?
The USB storage drive is not found when I attempt to map the drive on my Mac Mini Lion OS, it is not found. My question is, does the wrt160nl storage feature work with Mac OS? I have upgraded firmware to 1.0.0.3 and latest version of Lion
I just purchased a new E4200 router. When I try to set it up, , it says that my software (Lion v. 10.7.2) is unsupported. Is there a download that will allow me to use this router?
The latest Mountain Lion (OSX 10.8) update somehow broke the Cisco VUSB software. I downloaded and installed Mountain Lion yesterday, and now the VUSB software is not working correctly. When I try to connect to my printer, an error appears saying the connection failed, but the dashboard shows it's connected. When I try to print, the printer is shown as unavailable. I have Cisco VUSB version 1.0.0 for OSX and the EA3500 Router.
Since lion is there for a while, it is still not possible to make a time machine backup on an USB hdd that's connected to the router. is Cisco coming with an firmware update?
I want to downgrade an acs acs 5.3 to 5.2. I have looked through the documentation, but somehow I fail to find the exact commands for the downgrade.Previously I just used the recovery cd to reinstall the image, but it must be possible to do a downgrade without loosing all the configuration.
i have 2504 with software 7.2.103.0 and i want to downgrade to version 7.0.235.3 , but i face problem after the TFTP Transfer complete and display this erorr messagges:
- Sanity check failed on file. The file was not downloaded completely!
- TFTP Failure while storing in flash!
i will attache file contains " debuge transfer trace enable " while i transfer the software.
I managed to get an AIM-CUE for my 2801 router. I upgraded from version 3 to version 7.1.5. then realised I can't licence it without buying mailbox licences from Cisco (working on a budget for a lab) I tired to downgrade but I get the error
We are running ASA5520 with version 8.4(2)8 software and ASDM 6.4(5)205.We have noticed the following problems:When having more than 30 IPSec,sessions connected, the log fills up with errors "System is low on free memory blocks of size...", When filtering by "AnyConnect Client" in "Monitoring > VPN > VPN Statistics > Sessions" the values "Bytes Tx / Bytes Rx" column is presented in one line ie. "8450198968129194". Seems to be missing a <cr><lf>,When uploading a new CSD-image (via ASDM) all configuration för GPO, CP, DAP seems to dissapear, though, the config seems ok when looking at a sh run. Also, the newly updated csd-image doesn't show i ASDM.
Some time ago I updated a WLC, model 2504, from version 7.3 to 7.4.100.0. I also update the FUS (Field Upgrade Software) to the latest release, 1.8.0.0. Now I need to downgrade the WLC back to 7.3 version.
My doubt is: Can I just take the normal processes and downgrade the WLC back to 7.3, even with the FUS in version 1.8.0.0?
Newly shipped cisco ACS appliance 1121 has been shipped with ACS version 5.0 , I need to downgrade to ACS version 4.2,0 , I could not see recovery CD or DVD for acs 4.2 along with shipment , Is ACS 1121 appliance is comptaible to acs 4.2.0 version ? .
My ACS BOM details CSACS-1121-K9 ACS 1121 Appliance With 5.1 SW And Base license
Working on a project consolidating all controllers to a single 8500 controller with a standby. Moved an AP over to test the process and everything worked fine. Took a little longer than I thought it would, but given the design with new flexconnect abilities, the creation of AP groups well you know.
I get the AP over and one of my ssids doesnt work because the key is different, so gotta move the AP back over to resolve production issues.
