The USB storage drive is not found when I attempt to map the drive on my Mac Mini Lion OS, it is not found. My question is, does the wrt160nl storage feature work with Mac OS? I have upgraded firmware to 1.0.0.3 and latest version of Lion
View 2 RepliesI have WRT160NL with Firmware Version: 1.0.02. After 3 days of trying to connect my WD Elements 3TB I succeeded with 2 partitions of 1TB and one of 700 Gb not visible from router. I'm ok with that. The problem now is when I copy my files. I'm trying to create TV Series library for my Apple TV. Everything is working fine except the size of the files. When I'm copying files from PC USB they are corrupted on the network storage and not accessible. When I'm copying one file of size 350 Mb on the Network Storage via WIFI working fine but is saved with size of 2,7 Gb.
View 6 Replies View RelatedI recently bought a WRT160NL router. I have a 10/10 Mbps internet connection, but when I am connected via the router it only gives me ~2.5/1 Mbps speeds. Connecting my computer directly to the "wall" results in 10/10 Mbps speeds. I have tried connecting to the router both wireless and by wire, it makes no difference. The internal wired and wireless speeds are fine, as I have copied files over the internal switch and via the wireless network at relatively high speeds. I have not fiddled with any connection settings except creating a few permanent DHCP leases.
View 6 Replies View RelatedFirmware is not available for WRT160NL in this site. Only Setup Wizard and Firmware Upgrade Instructions are available.
View 1 Replies View RelatedApparently the setup cd does not work with Mac OS Lion. Anyone else out there is using this router on a Mac running Lion...if so, how did you set up the router.
View 3 Replies View RelatedI just purchased a new E4200 router. When I try to set it up, , it says that my software (Lion v. 10.7.2) is unsupported. Is there a download that will allow me to use this router?
View 2 Replies View RelatedRunning an E4200 with Mac OS X Mountain Lion?
View 3 Replies View RelatedI just purchased a new E4200 router. When I try to set it up, , it says that my software (Lion v. 10.7.2) is unsupported. Is there a download that will allow me to use this router?
View 2 Replies View RelatedI have my internet connection connect to my main Linksys router WRT160NL (192.168.1.1) with 192.168.1.x.My 2nd Linksys router connect to the first one as Gateway as well.The 2nd router has its WAN ip of 192.168.1.100 and it's local subnet as 192.168.2.x.My machines at 192.168.2.x can get to the internet and connect to all machines in the 192.168.1.x network.However, the 1.x network can't access the machines on the 2's network. And because of that, i can not sharing or printing between two network.I try to add static routes on my main router (192.168.1.1) with the route: 192.168.2.0 mask 255.255.255.0 and defaute gateway 192.168.1.100However, the route not work still.anyway to make sure that the 1.x network able to access the 2.x network and from 2.x access 1.x for sharing files and printing.
View 1 Replies View RelatedIs there any way yo restart the WRT160NL from the web interface? I've had several routers before this Linksys and all of them had this option. In the web GUI of the WRT I can't find the way to do it and I have no other solution of unplugging it and plugging again.
View 6 Replies View RelatedMy router is dropping the downloadspeed from 20mb to 1. After turning off and on, the router restores for a few days.
View 3 Replies View RelatedI'm currently connected to an ISP whose modem is equipped with a wireless router. The router works fine, however, its range is too short. I tried configuring my Cisco Linksys WRT120NL to the modem and the internet does not go to my computer.
View 2 Replies View Relatedi have 2 questions regarding wrt160nl.
1.Is it possible to have ssh or telnet access on the router, with the default firmware?
2.Is it possible to disable one of the antennas on the router, while has installed the default firmware?
I have a issue with using a Media Server in my WRT160NL. I have tried several firmwares, but issue exists in all firmwares.I tried to play files on my Samsung LCD TV with embedded media player (this player can play files from USB storage or from DLNA servers). I have several video files in mkv and avi format. My TV has wireless connection to router (270Mbit). And I have the following situation:1. I write these files on USB drive, plug to TV, play in embedded player - all OK.2. I have a samsung DLNA server on PC and try to play the same files from PC via network - all OK. (My network - PC to WRT160NL via cable, TV and some other devices via WiFi, but in this time only TV via WiFi.)3. I plug the same USB drive with same files to WRT160NL, go to settings and enable Media Server, choose two folders for scan (one for MKV, one for AVI), scan it. I run player on TV, choose WRT160NL. TV can see all video files, but:- when I try to play mkv file - I have error after several seconds "the unsupported file format"- when I try to play avi file - it plays, but after 20-40 seconds I have error "WRT160NL is disconnected".What is wrong with DLNA server in WRT160NL? Because from other server via router all OK. USB drive in NTFS format, maybe I need to use a ext3 or other file system for DLNA?
View 2 Replies View RelatedRouter is configured for manual setup, Wireless-G only, IP addresses start from 2, (range from 2 to 201).
I have a Gigabyte M912 netbook that used to connect to Internet over wireless through my old D-Link and had no problems with that.
With WL160NL it connects to the wireless all right, but it does not go anywhere from there. It gets an IP address, connects successfully, but no internet sites can be accessed. Pinging gateway (192.168.1.1) gives 4 request timeouts. Other devices (Acer A500 tablet, sever smartphones, even a blasted Wowwee Rovio) have no similar problems< connecting and seeing each other and connecting to the Internet.
1. I have no idea why that happens.
2. Restarting the netbook, switching the wifi module on and off, removing remembered network settings and inputting them anew etc. does nothing.
3. Manually configuring the netbook to use a predefined static IP address instead of DHCP did not work.
The netbook uses an Atheros AR5007EG module.
I have an issue with new Win8 & IE10. When I try to access web management interface of my wrt160nl (Firmware Version: 1.00.01 B15) via HTTPS I'm receiving the foolowing message:"Continue to this website (not recommended)." If I click on it another error page appears:"Certification error: Navigation blocked. There is a problem with this website's security certificate"
At the same time I'm able to acccess the management interface via HTTPS, but from my laptop with Win7 & IE9. There if I click on the red Certificate Error > View certificate and the certificate information is:Issued by: Linksys Issued to: Linksys Valid from : 1.1.2009 to 1.1.2010
So I'd like to know if I could update the router certificate or what settings should I use in IE10 in order to access the web management interface via HTTPS?
Since lion is there for a while, it is still not possible to make a time machine backup on an USB hdd that's connected to the router. is Cisco coming with an firmware update?
View 9 Replies View RelatedI've just bought an E2000 and I Cisco Connect doesn't run on OSX-Lion, and I was unable to find it on support downloads. But this is only a comment, my concern is that I'm not able to see on main menu how many DHCP clients are connected nor of course to check their traffic. Other routers usually provide at least DHCP clients
View 4 Replies View RelatedAfter a ugrade from Snow Leopard to Lion on my Imac, the software witch i have by mine E3000 router, works not longer anymore
View 1 Replies View RelatedI just bought a refurbished WRT160NL router. The router is working fine, but when i tried connecting my Extrernal hdd it is not detecting.
View 1 Replies View RelatedI've updated the firmware to unofficial url... and since then I can't connect to router through web interface. What can I do? Is there any way to update firmware back to official without web interface?
View 2 Replies View RelatedI took one and a half hours to get everything set up, I've got a PPoE connection, my problem is that ever since I entered the administration interface each and every page takes 2-5 minutes to load, it's absurdly slow, also, when trying to setup my WiFi, it timed out several times, I updated the router to the latest firmware, the same issue, it took me 4-5 retries to get WiFi set up properly. Sometimes navigating from page to page is quicker, 30-40seconds, but still those are some big times.
Is this normal behavior or do I have a hardware problem and I need to take it back and request a new one?
Mention: I am wired from a laptop, all the lights are blue, blinking nicely.
The latest Mountain Lion (OSX 10.8) update somehow broke the Cisco VUSB software. I downloaded and installed Mountain Lion yesterday, and now the VUSB software is not working correctly. When I try to connect to my printer, an error appears saying the connection failed, but the dashboard shows it's connected. When I try to print, the printer is shown as unavailable. I have Cisco VUSB version 1.0.0 for OSX and the EA3500 Router.
View 9 Replies View RelatedI replace standard antennas with 2 DLink 7 dBi antennas, but signal strength much lower with them. Does this antennas compatible with WRT160NL? Firmware Version: 1.0.03
View 1 Replies View RelatedWRT160NL exchange download and upload speeds.Before the router everything is fine, then it wireless or Ethernet port occurs above situation.No difference what firmware it is (1.0.02, 1.0.03, DD-WRT...)
View 7 Replies View RelatedTrying to update my firmware 1.00.01 B15 to 1.00.01 B17. I downloaded the firmware to my desktop (using mac os X 10.5.5) and connected my computer directly to port 1 on the back of the router. I used the Firmware upgrade tool under the Administration tab to upload the new firmware file. The update progress starts but fails at 98%
View 4 Replies View RelatedI have an NTFS formatted USB disk drive (Western Digital My Passport Essential Black 320 GB WDBAAA3200ABK) attached to the WRT160NL wireless router (Firmware Version 1.0.02), and I have video, picture and music files on the USB disk drive in three folders: Videos, Music, Pictures. Auto-scan is disabled, I scan the media files manually by clicking on the 'Scan All' button.
PROBLEM 1 The worst problem is that the router is very sensitive to files that can't be recognized by the router as media files. For example if there are subtitle files (*.str) between the media files, then strange and nondeterministic things happen: some valid media files are skipped and not included in the media database; some files included but the file names are mixed. The most irritating in the bug is that there is no log file, where you could find the problem, and so you never know which file cause the problem, and you have to browse through all the files hunting for the cause.
PROBLEM 2 When the router is in the process of scanning the media files, then the internet (WAN) connection often can't be used, although the router can be accessed and the status says it is connected to the internet.
My University has free Internet at student homes, but we need to login by PPTP to get an official, public IPv4 and be able to reach the outside world. The network people at the University says that when the PPTP is up, everything should be open (no firewall of any kind).
have my WRT160NL that gets a 10.10.73.0/23 address from DHCP on WAN port. Currently I have 10.10.74.21. My internal network uses 172.17.17.0/24.My PPTP-server is located at 10.192.1.1 and when I connect, I usually get an IP in the 158.37.73.0/24-range. Currently I have 158.37.73.28. I use DynDNS to make sure I always know the public IP by the host binders.dyndns.info ...
So, I have Remote management enabled with HTTP and HTTPS, any IP and default port 8080. But no response from the outside world seems to go through.If I turn of the "filter ICMP" but keep the SPI Firewall on, I get ping reply from external sources towards my router, but still no HTTP or HTTPS response.I also have a Torrent I try to port forward to to be active, this is 23277, and this is the only thing that keeps coming up in the incoming log on my router.
It's not possible to connect to the routers management over the PPTP-tunnel?And why can't I get the port forward to work .. Same reason? PPTP 158.37.73.28 -> 172.17.17.100 (LAN) won't work?
my router stop every exact 3 days, why? when it stop , i don't have net connections and i can't send ping in it?
i try to update de firmware and it do same if i remove de power cable and put it back it start ok?
how i can resolve that?
do external hard disks automatically spin down after a period with no access/use when connected with the USB port of the WRT160NL?
View 1 Replies View RelatedSo the problem is this: I have a Samsung TV (LE32B650) with the most recent firmware installed, connected via wire with the WRT160NL.The router also has a 320 GB disk plugged in with a bunch of movies.When I use the uPnP media server with Windows 7 PCs (wirelessly) or even a Samsung smartfone it all works very well. However the TV has an issue disconnecting from the media server in just moments from turning the DLNA function.Well to be more precise the TV says the the media served got disconnected.The router has the latest firmware, I have tried with HDDs ane thumbdrives (with just 1 AVI to make sure there is no conflict of unsupported file formats), I exchanged the wire (TV<->router), added guest user to access the partition with all scanned folders.
View 3 Replies View RelatedI have my USB HD mapped on my PC through my EA4500 router but, it will not connect automatically because, I think, it needs a password. (If I "explore" the mapped drive, it asks me for a password, then connection is fine, until my PC is rebooted.)Is there anyway of getting around this without leaving my HD unprotected? I am using the Smart Wi-Fi software for the router.
View 6 Replies View RelatedI have a litle problem wit wireless N, this not working for me.I have the last version of firmware for this router ( Firmware Version: 1.0.02 )I use this settings for wireless:
Wireless Configuration: Manual
Network Mode: Wireless-N Only
Network Name (SSID): named by me
Channel Width: Wide 40 MHz
Wide Channel:: Auto
Standard Channel: unselectable
SSID Broadcast: Enabled
Wireless Security:
Security Mode: WPA2 Personal
Encryption: AES
Passphrase: online letters and numbers
And this is all my settings for wireless connections.What other settings can I do to enable wireless N?