Linksys Wireless Router :: E3000 - Upgrade From Snow Leopard To Lion (mac)?

Aug 10, 2011

After a ugrade from Snow Leopard to Lion on my Imac, the software witch i have by mine E3000 router, works not longer anymore

View 1 Replies


ADVERTISEMENT

Snow Leopard IMac With Virtualbox Installed?

Apr 24, 2012

I have a Snow Leopard iMac with Virtualbox installed. On my Virtualbox i am running windows 7. My job has two different networks. I need my Mac on Network 1 and I need to have my windows 7 in Virtualbox on network 2. If i install a USB Ethernet port on the iMac and plug network 2 into it, how can i make it work just for Virtualbox? I then want to make the built in Ethernet port work on network one and be just for the iMac?

View 5 Replies View Related

Network Windows Computer Won't Show In Finder Of Mac OS X 10.6 (Snow Leopard)

Dec 26, 2010

Old Macs had windows locations automatically shown in the Finder under Network. New Macs doesn't. How come and how can I change it?

View 1 Replies View Related

Linksys Wireless Router :: Upgrade From WRT52G To E3000?

Jun 5, 2012

Want to switch to dualband E3000 from older, working fine except needs resetting often.  What steps do I need to take?  I do not have E3000 setup disk.  I fear that I will go down a path that makes both of the routers unusable, at least down many hours.

View 9 Replies View Related

Linksys Wireless Router :: E3000 - Firmware Upgrade Error

Aug 24, 2012

I have an E3000 with firmware v. 1.0.01 build 6.  I am trying to upgrade to the latest firmware version.  I downloaded the file, and when I went to install from the web page I got the error message:  Not enough memory available. I tried from 2 computers and got the same message. 

View 6 Replies View Related

Linksys Wireless Router :: E3000 Firmware Upgrade Failure

Sep 14, 2010

I was prompted by Cisco Connect to upgrade the router software.  During this process it came back and said the update failed.  At this time the network connection dropped.  The power light is now flashing on the device. 

View 9 Replies View Related

Linksys Wireless Router :: Upgrade Fails For E3000 Firmware 1.0.04

May 25, 2012

I have tried repeatedly to upgrade my firmware from 1.0.03 to 1.0.04, but it always fails with a message :cannot upgrade at this time..."  I've tried both IE and FireFox, and both wired and wireless connection to my PC (Windows 7).

View 4 Replies View Related

Linksys Wireless Router :: E3000 Cannot Connect To Cable Modem After Firmware Upgrade

Aug 28, 2011

Upgraded my E3000 from 1.0.02 to 1.0.04 and now I cant get an ip from my arris modem. I did the 30/30/30 reset and everything but no luck. I've had to plug the modem directly into the computer for now. Where can I find the 1.0.02 download or how can I fix this?

View 3 Replies View Related

Linksys Wireless Router :: Setting Up An E4200 On A Mac Running OS Lion

Sep 23, 2011

Apparently the setup cd does not work with Mac OS Lion.  Anyone else out there is using this router on a Mac running Lion...if so, how did you set up the router.

View 3 Replies View Related

Linksys Wireless Router :: E4200 With Mac Lion Software / Will It Work

Jan 10, 2012

I just purchased a new E4200 router. When I try to set it up, , it says that my software (Lion v. 10.7.2) is unsupported. Is there a download that will allow me to use this router?

View 2 Replies View Related

Linksys Wireless Router :: Wrt160nl USB Storage Not Mapping On Mac OS Lion

May 29, 2012

The USB storage drive is not found when I attempt to map the drive on my Mac Mini Lion OS, it is not found. My question is, does the wrt160nl storage feature work with Mac OS? I have upgraded firmware to 1.0.0.3 and latest version of Lion

View 2 Replies View Related

Linksys Wireless Router :: Running E4200 With Mac OS X Mountain Lion?

Feb 20, 2012

Running an E4200 with Mac OS X Mountain Lion?

View 3 Replies View Related

Linksys Wireless Router :: E4200 With Mac Lion Not Supporting Software

Dec 29, 2011

I just purchased a new E4200 router. When I try to set it up, , it says that my software (Lion v. 10.7.2) is unsupported. Is there a download that will allow me to use this router?

View 2 Replies View Related

Linksys Wireless Router :: E4200 / Lion And Time Machine Backup?

Dec 21, 2011

Since lion is there for a while, it is still not possible to make a time machine backup on an USB hdd that's connected to the router.  is Cisco coming with an firmware update?

View 9 Replies View Related

Linksys Wireless Router :: E2000 - Cisco Connect Doesn't Run On OSX-Lion

Aug 3, 2011

I've just bought an E2000 and I Cisco Connect doesn't run on OSX-Lion, and I was unable to find it on support downloads. But this is only a comment, my concern is that I'm not able to see on main menu how many DHCP clients are connected nor of course to check their traffic. Other routers usually provide at least DHCP clients

View 4 Replies View Related

Linksys Wireless Router :: EA3500 / OSX 10.8 Mountain Lion Breaks Cisco VUSB?

Aug 3, 2012

The latest Mountain Lion (OSX 10.8) update somehow broke the Cisco VUSB software. I downloaded and installed Mountain Lion yesterday, and now the VUSB software is not working correctly. When I try to connect to my printer, an error appears saying the connection failed, but the dashboard shows it's connected. When I try to print, the printer is shown as unavailable. I have Cisco VUSB version 1.0.0 for OSX and the EA3500 Router.

View 9 Replies View Related

Linksys Wireless Router :: E3000 FTP Not Seen On The WAN

Apr 22, 2012

I have a Linksys E3000 router set as Lan-Lan 192.168.0.2 hosting my internal LAN connected to a motorola Surfboard (Brighthouse) internet Wireless/Wired access point 192.168.0.1.I have a Web server hosting a site connected direct to the surfboard (works fine) . The FTP "site" on the E3000 can be seen by all pcs on the internal LAN. However, it can NOT be seen from the internet (Android with FTP client being used for test device)
  
Primary Access point 192.168.0.1
DCHP server with reserved IP addresses for server and PC's and smartphones
Port Forwarding Set for Server at 0.004 : 80
Port Forwarding Set for E3000 at 0.002 :21
 
Secondary (E3000) router 192.168.0.2
DCHP server is disabled
Port Forwarding is Not being used
connected to primary router LAN port 1 by LAN port 1 on E3000
 
All pc's can access the Internet when connected to the E3000 via cable or wireless?All pc's can access the FTP server on E3000 via cable or wireless as a LAN location (connected to either router)?How can I get the FTP to be seen from the internet ?

View 2 Replies View Related

Linksys Wireless Router :: How To Get Most Out Of E3000

Jun 29, 2011

I recently bought a Cisco e3000 router. I updated the firmware but I am still only getting 1.33 Mbps at most. The only things plugged into it is my PC and my xbox. I bought the router so i could get a better connection on my xbox so netflix wont stop playback.

View 9 Replies View Related

Linksys Wireless Router :: E3000 No Address From ISP On WAN?

Apr 2, 2012

I have an e3000 that cannot obtain an address from the ISP.  I can get an address on the computer and an old router by directly connecting the cable to the computer or the router.  I can also daisy-chain the e3000 to the old router, and I can get an address on the e3000 from the old router.  I have hard reset the e3000, changed firmware from the Linksys to TomatoUSB and back to Linksys, and I still can't get it to work.  It worked fine on Saturday until a bolt of lightning hit close to the house.  Since then, I cannot get the e3000 to connect to the ISP.  

View 9 Replies View Related

Linksys Wireless Router :: Set Up E3000 For ATT U-verse?

Jul 11, 2011

How do you set up the E3000 for ATT u-verse?

View 2 Replies View Related

Linksys Wireless Router :: Way To Install E3000

May 9, 2012

install linksys e3000.

View 1 Replies View Related

Linksys Wireless Router :: Restore Ver.1.0.04 On E3000?

Oct 26, 2012

I had a failed Tomato upgrade and now Connect Setup can't see router to revert back to original. I get message 82BD0101 or computer not connected to router. Also the http://192.168.1.1 trick won't work. Is there any way to restore besides 30/30/30?

View 2 Replies View Related

Linksys Wireless Router :: E3000 - Override Only DNS From ISP

Nov 3, 2012

I would like to override the DNS servers provided by DHCP via my ISP. The other settings I would like to preserve (like my assigned IP).How to achieve this with E3000 ?

View 3 Replies View Related

Linksys Wireless Router :: E3000 Gets Slow After A While

Feb 17, 2011

It seems like after a certain amount of time, maybe a few days... my E3000 gets slowww.. I'm talking dog slow.  And it's not just the internet, I have a media server connected to it, and usually when I put something on it, the transfer rate is about 3.5MB/s (not bits, bytes).  But everything is slow, I top out at speed of maybe 1/6 normal on the internet as well.

View 8 Replies View Related

Linksys Wireless Router :: E3000 Cannot Keep Signal

Aug 21, 2011

We have  a wireless internet service. Not satellite. We basically have an antenna on our house that picks up the signal from a tower a mile or two away. I used the e3000 router when we lived in town with broadband internet and it worked fine. I can't get it to keep a hold of a signal. I can connect to the router from the computers but the router drops the signal from the tower. I have an old router that the wireless company was kind enough to lend me that works  , but the signal is weak and it could die at any moment... I"m at my wits end.. I have an expensive piece of equipment that wont hold the signal. I have updated the firmware and the Cisco connect software..

View 5 Replies View Related

Linksys Wireless Router :: Testing QoS On New E3000

Apr 19, 2010

Has anyone tested QoS on the new E3000? Whenever I add an application (e.g. Voice Device) and set priority to Medium or High, my upstream bandwidth for everything else is immediately cut significantly, even when I'm not using the priority application. 
 
For example, with QoS disabled, I can consistently get 10Mb upstream (speedtest.comcast.net).  As soon as I enable QoS, upstream is capped to exactly 2Mb! On my old router, there was an option to set the total upstream bandwidth -- but on the E3000 there is no such option that I can find.  

View 9 Replies View Related

Linksys Wireless Router :: Use Internet With E3000?

May 18, 2011

just bought an e3000 and want to use it with wireless internet- usb modem. when setting up it wouldnt go any further than the 'searching for connection' page as it couldnt detect a connection in the 'internet' lan (wan?) port.can i set it up to accept the wireless usb modem?

View 6 Replies View Related

Linksys Wireless Router :: Lost Cd For E3000?

Aug 17, 2012

I lost my cd for my router e3000 any way still to use it?

View 1 Replies View Related

Linksys Wireless Router :: E3000 - Wi-Fi Not Working

Oct 20, 2010

I just bought an E3000 about 30 hours ago and just unrealistically my router now doesn't want to give me any WiFi at all. I tried reset button, tried re plugin all of my system as well as pressing for short and long period the middle button that indicates WiFi is accessible. I already bought 3 linksys routers.

View 2 Replies View Related

Linksys Wireless Router :: E3000 - How To Get It Working

Aug 25, 2011

Looking at upgrading my router to an e3000 however I've got a couple of questions. I might come across as a bit thick with this one but I have read that you need a modem to make the router work, I can't get my head around this as I've not come across this before. I always thought the router was the modem!! I've also heard that the E3000 only works with cable ISP and not ADSL, is that true?

View 2 Replies View Related

Linksys E3000 Wireless-N Router Slow Speed?

Feb 25, 2011

I have FiOS and their supplied wireless router Actiontec #MI424WR. I have home theater equipment that uses the newer N signal so I purchased a Linksys E3000 Wireless-N Router. I have one of the LAN outputs on the Actiontec feeding the Linksys input and Wi-Fi turned off on the Actiontec. This is working good for my wireless home theater equipment but I am having problems with my wired speed. It has gone from averaging anywhere from 20 to 30 mbps on numerous test sites when plugged into the Actiontec to averaging around 10 mbps when plugged into the Linksys.

1) Is my wireless N speed going to top out at 10mbps or less since that is all the router is showing on wired? Shouldn�t N be broadcasting a faster speed if given the ability?

2) I have my computer currently plugged directly into the Linksys verses the Actiontec. This makes it easier to program the Linksys router. Since I am no longer using the wireless part of the Actiontec there really is no need to be plugged into it. Is there anything I can do get the speed higher on the Linksys, a setting I can change? Will I have to plug the computer back into the Actiontec to get the higher speed and then move it every time I may need to make a change to the Linksys?

View 2 Replies View Related

Linksys Wireless Router :: How To Use E3000 Dhcp Through Wifi

Aug 22, 2011

I've been searching how to make my E3000 use the DHCP and IP address on my primary router so I can share printers and computers on same gateway IP. I tried turning off DHCP on E3000, but not sure how to tell it to use the DHCP from the source "INTERNET"

View 1 Replies View Related

Linksys Wireless Router :: E3000 Will Not Connect To Internet?

Aug 30, 2011

shows connection to cable modem, shows IP lease, able to renew and release lease. shows all DCHP clients, but does not allow internet to get through. tried cloning old routers MAC, no dice.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved