The latest Mountain Lion (OSX 10.8) update somehow broke the Cisco VUSB software. I downloaded and installed Mountain Lion yesterday, and now the VUSB software is not working correctly. When I try to connect to my printer, an error appears saying the connection failed, but the dashboard shows it's connected. When I try to print, the printer is shown as unavailable. I have Cisco VUSB version 1.0.0 for OSX and the EA3500 Router.
I am currently have a Cisco 881 router running EasyVPN server. I recently created come IPSec rules that allow trafiic to specific IP's for a specific security group:
access-list 105 permit ip host 10.1.0.5 any access-list 105 permit ip host 10.1.0.15 any access-list 105 permit ip host 10.1.0.16 any access-list 105 permit ip host 10.1.0.32 any
This works as expected with our Windows users, however our Mac users (using native VPN Client) can only reach the FIRST ip in the string of access statements. When I was torubleshooting this, I moved .32 as the first statement and I could only reach it and none of the others.
I've been developing Node.js apps on my localhost on port 1337 for last two years with no problem as shown below.
$ node app App started on port 1337
Today I wanted to test how things go with default port 80, so I did:
$ sudo node app App started on port 80
But after that my network went crazy. Now I can't access any local address including localhost. When I ping to localhost it points to some weird public IP address (218.38.137.125) instead of 127.0.0.1.
I'm with one problem, my OS Lion don't authentication in the Secure ACS Version: 5.2.0.26.10.For the Mac Lion operating system to work you must put in execeção the MAC Address of your computer. I wonder how it could cause the OS to authenticate the ACS Lion.
i can access app store on my iphone at home and other broadband connections but cant access at work. thinking if it would be the asa thats stopping htis. i have allowed port 3689 but no joy.
I have a E3000 and just upgraded my Mac with the OS X Mountain Lion. I can't access my external HD anymore, although when I go to the router set up, on the storage tab, the router appears to recognize the HD.
A customer of ours has the following access points and wireless lan controllers on site. They want to use the Apple Bonjour service with Apple TV's and iPads. I have enabled multicast feature of the 5508 globally and one the SSID.The Apple TV has an ethernet connection and the iPads connect over the wifi. The Apple tv is on the same subnet as the iPad's - the Bonjour features do work for approx 5/10 minutes then it stops working for some reason. The Access Points plug into a Cisco 2960 Layer 2 switch, the 5508 controllers plug are in LAG mode and plug into a Nortel Layer 3 stack which I have enabled IGMP snooping.I've read that the Apple Bonjour service isnt designed to work on a multi subnet network - but both the Apple TV and iPad are connected on the same subnet. Sounds like some kind of timeout but not too sure.
how to setup the wireless interface to forward multicast packets? Basically I cant get the ipads etc.. to see the AppleTV to control it. I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface. I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.
We had a problem with SMTP inspection dropping some regular emails (Cisco 2901 IOS 15.0).Incoming mails are going thru Spam and Virus Blocker so that bypassing SMTP inspection is not security issue in this case.
As i'm facing the issue with Cisco CSC module installed on ASA 5510, It hangs up and doesnt work sometime, so it is bypassing all the traffic without inspection through CSC module. After restarting ASA 5510 box, it works fine as it used to work. Now, My question is how can i refresh the module again without interrupting the ASA box/ and how can i avoid this problem forever? Because i cant interrupt the daily work due to this module problem by restarting the box again and again.
the inside interface on our primary ASA seemed to "hang". It dropped all the packets it received. Because the interface didnt go down, failover didn't happen. Device's info;
-Cisco Adaptive Security Appliance Software Version 8.2(3) -Device Manager Version 6.3(3) -Hardware: ASA5550, 4096 MB RAM, CPU Pentium 4 3000 MHz -Internal ATA Compact Flash, 256MB -BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
I attached a capture picture shows that traffic didnt go to the roof when the issue happened. Why the interface would "freeze" randomly?
When I try to boot my ASA5550 it hangs at "booting system please wait". I have tried to reseting the ASA but this doesn't work. what to try as I cannot get to the rommon.
I have a problem getting my ASA 5520 boot properly. I first though of a flash problem and did a flash erase in ROMMON, then it brought error 15 during boot (No images found in / Error 15: File not found). I then TFTPied and image from Rommon, when done loading the image and start booting, the system hangs and nothing else. Attached is the screen I got on my console during boot up. BTW, the system was in the same state before I undertook any of the above actions. I don't have a service contract, so I can't contact TAC.
I've a Cisco 5550 which hangs on powering up and stays at " Booting System, please wait..." forever and it has a flashing green Status LED.
The steps I've taken so far are:
1. Consoled with a different computer and tried to send the break signals (didn't work) 2. Open up the unit tried to remove the RAM's and reseated them again. 3. Taken out the CMOS battery on the board and replaced it with the new one (no luck still)
What is the next step, or shall I assume that the unit is dead.
I've just bought an E2000 and I Cisco Connect doesn't run on OSX-Lion, and I was unable to find it on support downloads. But this is only a comment, my concern is that I'm not able to see on main menu how many DHCP clients are connected nor of course to check their traffic. Other routers usually provide at least DHCP clients
I'm sure this is simple to resolve. I just bought a new Cisco 2901 ISR Router. How do I configure the Cisco 2901 ISR Router for Zone Firewall? The "zone" command is not recognized and does not show up in the "?" list in config or user modes -
Apparently the setup cd does not work with Mac OS Lion. Anyone else out there is using this router on a Mac running Lion...if so, how did you set up the router.
I just purchased a new E4200 router. When I try to set it up, , it says that my software (Lion v. 10.7.2) is unsupported. Is there a download that will allow me to use this router?
The USB storage drive is not found when I attempt to map the drive on my Mac Mini Lion OS, it is not found. My question is, does the wrt160nl storage feature work with Mac OS? I have upgraded firmware to 1.0.0.3 and latest version of Lion
I just purchased a new E4200 router. When I try to set it up, , it says that my software (Lion v. 10.7.2) is unsupported. Is there a download that will allow me to use this router?
I have Cisco ASA5510 which is causing issue. when i download somthing through firewall download speed decreases and if i bypass the firewall (directly connecting to router through static IP) i am getting proper download speed.
i have set the port on auto negotiations on both firewall inside and Core switch. still having the same problem.
I am trying to use the apple finder/application to view all my apple mac-mini computers. I do have two asdm-5505 connected via a vpn tunnel.
At this point I can view only the computers on the local subnets. I called AppleCare and they gave some possible ports that can be opened in the firewall to allow the Bonjour protocol to pass through the ASDM:ports 5297/tcp, 5298/tcp-udp, 5353/udp, and 5354/tcp
Since lion is there for a while, it is still not possible to make a time machine backup on an USB hdd that's connected to the router. is Cisco coming with an firmware update?
I have a subnet for guest network access, both wired and wireless. We have a Netgear ProSafe that is trunked to a Cisco 2901 performing 'Router-on-a-Stick'. For most internal traffic, it all stays behind the ASA. But for guest traffic, I have a route-map that sets the next-hop address as the outside interface of the ASA. The question is, how can I still permit those users to access our internal DNS servers? Do I need any particular NAT translations, exemptions, DNS doctoring, hairpinning, etc.? I have an ACL on the inside interface that permits traffic from the guest networks to our internal DNS servers, and then the next ACL line denies any other traffic from the guest networks to any of our internal networks.
