D-Link DIR-615 :: Check To See If Firmware Needs Updating?
May 21, 2011How do I check to see if my firmware needs updating? I want to connect it to a motorola 2210-02.
View 4 Replies
ADVERTISEMENT
D-Link DIR-655 :: Updating Firmware To V1.35NA?
Dec 30, 2010I tried updating my firmware of my DIR-655 from 1.34NA to 1.35NA (Hardware Version: A1/A2).
However, I found something strange while updating the firmware, that made me stop, in order to ask the question.
Previously, when I did an update, I would browse for the location, and put it in, and it would allow me to update from that location.
Now, it will allow it, but when I select to update from the desktop (C:usersderickdesktop),
it comes up with another location (C:fakepath) for the .bin file.
D-Link DIR-655 :: Recommended Firmware For Updating 1.21?
Aug 9, 2012i have an DIR-655 Hardware Version: A4, with Firmware Version: 1.21.Its dated: 2008/11/13.Do i get any improvement updating? And in such case, which FW should i use? It must be rock solid!
View 3 Replies View RelatedD-Link DIR-655 :: Updating Firmware On Router?
May 9, 2011a friend of mine(from the US) gave me this router. i am currently living here in the Philippines. and as I check my router's homepage, it gives me
Product Page: DIR-655
Hardware Version: A3
Firmware Version: 1.21
when I go to tools>firmware and check for the latest version, I get
Current Firmware Version : 1.21
Current Firmware Date : 2008/10/09
This firmware is the latest version.
I don't experience problems using this firmware but I think it's outdated because most of the users in the forum uses new firmwares.
where can I download firmware that is suitable for my router?? and is it risky?
should i download from the D-Link Philippines website? (the router was not bought here)[URL] or North America Firmwares should work fine on my router?
D-Link DIR-655 :: Cannot Access FTP Address After Updating Firmware
Dec 3, 2011I updated my firmware to the latest update a and then restored My personnel setting and now I can not access my ftp, I checked my IP address to make sure it didn't change , setting looks like did before update I went from firmware 121 to 135, was there new setting that I have to change to get it to work. I get no log in screen I get Windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access the folder?
Details:A connection with the server could not be established
D-Link DIR-655 :: Stopped Working After Updating Firmware To 3.35
Oct 21, 2011My DIR-655 stopped working after updating firmware to 3.35. Only power light comes on. port4 flashes for a microsecond when I plug it in. Recovery mode has not done anything. Computer acts like nothing is connected through Ethernet, says "No Cable Connected." Only power light stays on the whole time. I am guessing this thing is broken now. when i go through ipconfig, "no media connected." If not whats a good router under a hundred bucks today, had this router since early 2007.
View 10 Replies View RelatedD-Link DIR-601 :: Wireless Router Won't Broadcast After Updating Firmware
Nov 29, 2011I recently updated my firmware for a DIR-601 router and have internet while hardwired, but no wireless. I saved the configuration settings before updating, but this doesn't even matter because my wireless router doesn't even show up in the list of available wireless network connections. Why isn't my router showing up? I tried a few things like unplugging it and resetting it, but nothing seems to work.
View 3 Replies View RelatedD-Link DIR-655 :: Unable To Access Web After Updating Firmware To 1.35NA
May 3, 2011Few days ago, I updated the firmware of my router to 1.35NA and everything seemed to be working fine at first. After a while though, I noticed my Nexus One phone wasn't getting internet through WiFi anymore. It is connected to WiFi still, and it can ping the other devices on the network but it won't connect to the web. I have a Xoom tablet connected to WiFi as well and it is getting access to the web, though it seems to drop web access from time to time too, even before the firmware update. My phone always had a connection to the web through WiFi before the update. The two PCs that have a wired connection work fine. In the router logs, I also noticed that "UPnP renew entry 255.255.255.255 <-> ... UDP timeout:0 'Teredo'" being spammed over and over since the update, which I read has something to do with IPv6?
View 14 Replies View RelatedD-Link DIR-655 :: Save Configuration Of Router Before Updating To A New Firmware?
Jun 29, 2011For some reasons, my internet connection keeps dropping more often recently. My laptop still says it is connected to my network but I can just not have internet connection. It was not like that before but it happened more frequently now. What I did was to power off then on the modem and the router and everything will work fine again. I want to upgrade my firmware but I just wonder if I need to save all the configuration before doing the upgrading? If so, then how can I set it back to the old configuration that was saved?
View 5 Replies View RelatedD-Link DAP-1522 :: Can't Change LAN Connection Type After Updating Firmware
Mar 27, 2012I have my dap-1522 connected to my dir-655 in bridge mode. I was having intermitant connection problems with the dap-1522, so I updated the firmware to 1.41 for version A1. Now when I go to change the connection type to dynamic ip and save, it reverts back to static ip, which makes this thing useless for my network. Why won't it save?
View 6 Replies View RelatedCisco Routers :: Updating RV042 Firmware
Sep 5, 2011will updating my RV042 firmware allow me to download larger files? How do I know what version to update to? Our current version is 1.3.7.4
View 1 Replies View RelatedUse 192.168.254.254 IP And Configuration Settings Limited And No Option Of Updating Firmware?
Jun 19, 2011i have Aztech DSL605EW wireless modem. I updated its firmware on some philipines Globle Broadband network's firmware. Now the problem is to open its configration I have to use 192.168.254.254 IP and the configuration settings are very limited and there is no option of updating firmware in it. I am stuck with it.
View 3 Replies View RelatedLinksys Access Point :: WAP610N Updating Firmware
Mar 26, 2012I have a problem updating firmware for an WAP610N access point. The thing is i tryed to update from 1.0.01 to 1.0.03 and the update freezed at 49%. The next day it was restarted but of course it didn't worked again. The question is can i reset it some how so i can retry the firmware update ?
View 2 Replies View RelatedLinksys Wireless Router :: Updating Firmware For E1200?
Feb 28, 2013When I bought my E1200 router my primary (in fact only) computer was a Windows laptop. Since that time I bought a MacBook Pro and have been using that as my primary computer. The Mac is running on the latest OS (Mountain Lion).
I would like to install the latest software to maintain the router on my Mac but I was told several months ago that there was no update available for Mountain Lion. If that has changed, and if so then where can I download the appropriate software?
Cisco Switches :: Updating Firmware SGE2010 Switch
Oct 20, 2012what is the process of updating firmware on a SGE2010.
I would usually use TFTP - but, I can't see the TFTP command on these SGE2010's
Linksys Wireless Router :: EA2700 Gives Error When Updating The Firmware
Jul 3, 2012I have an EA2700 which I am trying to rollback to the older interface, however it errors out every time I try to install the firmware.All I ever get is this message: Unexpected Error The firmware update did not complete successfully. Please try again later.We've encountered an unexpected error. If the issue continues, please visit our Technical Support site.I've reset the router multiple times, powered it off overnight, re-downloaded the file multiple times, and am still unable to successfully rollback. Sometimes it even errors out when I try to set the password on the router itself and I have to reset it again before I can use the interface.
View 9 Replies View RelatedCisco Wireless :: WAP200 Updating Firmware Without Connecting It To Network
Aug 2, 2012I was brought a WAP200 that was giving a client some issues. I've been told the first thing to try is to update/reinstall the firmware. I have the newest firmware file downloaded and saved, and I have the WAP200 plugged in and sitting on my desk.
I reset the access point and connected it directly to my computer with a patch cable, then entered the default IP address (192.168.1.245) to attempt to access the device. No go. Is that supposed to work and something is wrong with it? All I want to do is update the firmware, because if the device has been reset and the firmware reinstalled and it's still not working, then we'll just deem it defective and have it replaced.
Cisco Routers :: RV042 - Failure Updating To Firmware / 404 Not Found
Sep 5, 2011I just updated my RV042 to the firmware RV0XX-v4.0.4.02-tm-20110704-code.bin and now im having this error every time that i try to logon in the router? 404 Not FoundThe requested server-side-includes filename, /usr/local/EasyAccess/www/htdocs/default.htm, does not seem to exist.
View 7 Replies View RelatedCisco Routers :: RV220W - After Updating Firmware There Is No DHCP And No Access To Anything
Apr 13, 2012I have a Cisco rv220w. I just tried updating the firmware. I used RV220W-Firmware-1.0.3.5.img. It rebooted, and now there is no DHCP and no access to anything. I tried the reset button for 10 seconds. That didn't do anything. The WAN and all the LAN lights light up. Power is on and solid. The light blinks alternating between the DMZ and the blank space to the right of wireless. How can I get this back to factory defaults?
View 5 Replies View RelatedLinksys Wireless Router :: Wrt54g - Can't Connect To Internet After Updating New Firmware
Dec 6, 2011i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware.
View 6 Replies View RelatedNetgear DGN2200 Won't Check For Firmware Upgrade - No Connection To Internet?
Dec 20, 2012My Netgear DGN2200 (Name NetgearCS) won't check for firmware upgrade because it says no connection to internet so unable to connect to the Netgear Servers - Yet this laptop I am currently using (wireless connection is turned off on laptop but not router) is wire connected to this same Netgear router and I have internet connection because I am able to post this enquiry. Note the Netgear DGN2200 router gets its internet connection from my Sky Router and is connected by wire to this Sky Router. FYI my iPhone is connected wirelessly to this Netgear DGN200 router (NetgearCS) and is able to connect to the internet. Do you know why my Netgear DGN2200 cannot check for firmware updates?
View 1 Replies View RelatedD-Link DIR-655 :: Webfilter Fails After Updating To 1.35NA?
Jan 19, 2011I've been using the web filter with no problem with my A3/1.33NA router until I upgraded to 1.35 last week. After the upgrade, i did a hard reset and re-entered the websites manually from scratch to the DENY list. I didn't even reuse the saved config file. And now the router no longer blocks any of the websites in the webfilter page even when i selected the ALLOW option.
View 14 Replies View RelatedWireless Link Speed Check
Nov 17, 2012How can I go about checking the link speed of my wifi on my iPhone? Android devices show it as standard when you click on the network you're connected to and Windows shows it via Task manager/Wireless properties.
View 7 Replies View RelatedD-Link DIR-655 :: How To Check Router Uptime
Jan 16, 2013I get frequent internet disconnects. Sometimes when I notice I can't get into the web gui; other time I can get in but I have to re-authenticate, and I see the wan port is re-initializing. So of course, the "WAN uptime" starts again at zero. I can then look at the "statistics" page and see that the LAN packets are really low (like low 4 digits). SO, my guess is the router is randomly resetting. But how can I check the router uptime?? I searched and I see plenty of folks reporting their uptimes, but I can't find it anywhere in the GUI. I want to be able to prove that it's the router and not the cable modem or WAN connection....I was getting the logs emailed, but really can't decipher anything. I have "system activity", "attacks", and "notices" enabled. It's DIR-655, hardware B1, firmware 2.10NA.I already emailed DLINK support asking for a warranty replacement, as this one is only 10 months old. If they don't come through, it's time to jump ship to a new vendor. Will be my second dead one in under a year.
View 7 Replies View RelatedTP-Link Dual-Band Wireless :: TL-WDR4300 - How To Check Who Is Connected To Router
Apr 11, 2013Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23
ISP : Teksavvy
how can I see who connected to my router?
D-Link DIR-825 :: Use NA Firmware On EU Firmware Device?
Mar 25, 2011Can you use the NA firmware on an EU firmware device?I assume yes, since the hardware is the same?What's the difference between the two?
View 14 Replies View RelatedD-Link DIR-615 :: Firmware For DIR-618
May 21, 2011i am looking firmware for DIR-618, previously there was a separate section for DIR-618 router what happened to it ?
View 2 Replies View RelatedD-Link DIR-655 :: Can't Update Firmware
Oct 1, 2012I have REV A and the firmwars version is 1.04. I want to upgrade to ver 1.35. I have downloaded the firmware to my computer. When I login to the router page and go to the firmware tab, when I try to click browse for the file nothing happens. I have tried using Internet Explorer and Firefox.
View 2 Replies View RelatedD-Link DIR-615 :: Flashing DD-WRT Firmware For 635 Onto It
Jan 16, 2013I was replacing a bad cap on my DIr-615 and noticed I have the 635(or 625?) board except there is no USB port or 3rd antenna soldered on.I soldered on a 3rd antenna from an old linksys router but don't know if it's working.If I flash the DIR-635 FW(I'm using DD-wrt) will it work fine and enable the antenna to work? Will having a third antenna even be beneficial at all for range and signal strength?I plan on flashing DD-wrt firmware for the 635 if that makes any difference.
View 3 Replies View RelatedD-Link DIR-655 :: A3 Cannot Upgrade Firmware
Feb 5, 2011I have a Dir-655 A3 with the firmware 1.32NA. I cannot get the new firmware 1.35NA to take. The router seems to go through the motions of the upgrade, but at the end, when I log back on, the firmware still says 1.32NA & all custom settings remain.I have upgraded the firmware on this router before and I know that when its upgraded, the router is basically reset to factory settings. All the settings have been backed up and I am attempting this upgrade via a wired connection.
View 2 Replies View RelatedD-Link DIR-655 :: Upgrade Firmware To 1.35 NA From 1.21?
Mar 28, 2012I have a DIR-655 Rev A4.I followed this forum in the past when there were many problems with firmware upgrades beyon 1.21. Because of this I never upgraded and was told to be satisfied that I can still stay with 1.21 as upgrades caused problems for a number of people.Everything still seems fine with 1.21 except the Shareport utility often does not pickup the printer connection upon booting to Windows Vista. I can always work around this by Disable and then Enable. It will then always find the printer. It is a minor annoyance however.Should I still stay with 1.21 or is upgrading to 1.35 NA recommended ? If I upgrade to 1.35 NA is there a downgrade path back to 1.21 if the upgrade does not work well ?
View 12 Replies View RelatedD-Link DIR-615 :: Can't Update Firmware
Nov 12, 2011I have a DIR-615 router, hardware rev. C1 running firmware v. 3.10, dated 4/17/09. I've been beating my head against the wall trying to get this router to properly forward ports for a bit torrent application, but it not only won't do that, it doesn't want to save DHCP reservations and it doesn't want to recognize my computer on the LAN if I set a static IP address (although it does allow my computer to connect and get an internet connection). From the D-Link website, the description of firmware update 3.12NA looks like it might take care of these problems, but I can't get the router to update. When I log into the router and check for updates, it returns a message saying the latest update is v. 3.11, dated 9/15/09. However, when I attempt to download the update, nothing happens. The D-Link website offers update 3.11NA (4/20/09), 3.12NA (3/8/10), and 3.13NA (9/30/10). Why does the website offer me a different update than the router itself? I downloaded 3.13NA and unzipped the folder, which has a text file and a .bin file; I presume the latter is the update. However, when I browse to this file and attempt to upload it to the router, nothing happens. How the heck do I update this router?
View 5 Replies View RelatedD-Link DIR-655 :: Won't Update Firmware
Jun 5, 2011My roommates and I keep getting knocked off the internet every few minutes on the router so I've tried a bunch of the tricks found here and am trying to also update the firmware. I downloaded the newest firmware, uploaded it to the router and it says it succeeded in the update, but then after reboot gives the same version it came with.
View 1 Replies View Related