Cisco Routers :: Updating RV042 Firmware
Sep 5, 2011will updating my RV042 firmware allow me to download larger files? How do I know what version to update to? Our current version is 1.3.7.4
View 1 Replies
ADVERTISEMENT
Cisco Routers :: RV042 - Failure Updating To Firmware / 404 Not Found
Sep 5, 2011I just updated my RV042 to the firmware RV0XX-v4.0.4.02-tm-20110704-code.bin and now im having this error every time that i try to logon in the router? 404 Not FoundThe requested server-side-includes filename, /usr/local/EasyAccess/www/htdocs/default.htm, does not seem to exist.
View 7 Replies View RelatedCisco Routers :: RV042 Dynamic DNS Not Updating Automatically
Nov 30, 2011I purchased 2 RV042's (h/w version 3) less than two months ago. I updated them to the latest firmware (v4.0.4.02-tm (Jul 4 2011 13:30:56)), did a factory reset to make sure I was working with a clean slate, set up DDNS through DynDNS and a site to site VPN between the two. Everything was working great for a month, then the DynDNS accounts expired because they weren't being updated. I reactivated the names on the DynDNS site, and started to monitor the "last updated" date and time. After 24 hours there were no updates according to the DynDNS site. I logged into one of the RV042's, and it said "Dyndns Enabled : Dynamic DNS is updated successfully." This is a stale message from 24 hours ago when I hit save. So I went into Setup | Dynamic DNS | Edit Config and there it also says "Dynamic DNS is updated successfully." I clicked "Save", status changed to " Dyndns Enabled : Updating..." for a few seconds, and then back to "Dyndns Enabled : Dynamic DNS is updated successfully". I refreshed the DynDNS website and it shows the current time (in eastern time, i'm pacfic) as the last time it was updated. So it works when I manually hit the "Save" button. Not making any changed, just hitting "Save". I've let the other RV042 go over 48 hours and it still hasn't updated. So it apears for the time being, I'll have to remember to push the "Save" button once a week to prevent my DynDNS accout from expiring. Does DDNS working in the lastest firmware and h/w version 3? If so, what is the update frequency?
View 6 Replies View RelatedCisco Routers :: RV220W - After Updating Firmware There Is No DHCP And No Access To Anything
Apr 13, 2012I have a Cisco rv220w. I just tried updating the firmware. I used RV220W-Firmware-1.0.3.5.img. It rebooted, and now there is no DHCP and no access to anything. I tried the reset button for 10 seconds. That didn't do anything. The WAN and all the LAN lights light up. Power is on and solid. The light blinks alternating between the DMZ and the blank space to the right of wireless. How can I get this back to factory defaults?
View 5 Replies View RelatedCisco Routers :: RV042 When Updating / Adding Mac Addresses / Table Is Always Sorted By IP Addresses
Oct 8, 2012In setup for old RV042 (V1), when updating / adding Mac addresses, the table is always sorted by IP addresses. But in the new oneRV042 (V3) I have, even with latest firmware 4.2.1.02 the list is random, thereby increasing the chance of user entering DUPLICATE IP addr with diff Mac addr. That will result in conflict.If the firmware sorts the DHCP entries by ip addresses, user would be able to catch duplicate ip errors even if the system does not flag the errors. All Cisco smart engineers can you all get the dhcp entries SORT by ip addresses.
View 2 Replies View RelatedCisco Routers :: Where Is MTU Setting On RV042 V3 With 4.0.4.02 Firmware
Oct 10, 2011I just replaced my old rv042 with the v3 and updated firmware to 4.0.4.02. i am looking for the MTU setting but i can't find it anywhere. Where that can be found?
View 2 Replies View RelatedCisco Routers :: RV042 Out Of Memory Errors On New Firmware
Sep 20, 2011The entire "incoming log table" is just full of this! It's all the same! This is on the current firmware 4.0.4.02Sep 20 12:49:35 2011KernelOut of memory: Killed process 5385 (iptables). Sep 20 12:49:39 2011KernelOut of Memory: Kill process 5387 (iptables) score 591 and children. Sep 20 12:49:39 2011KernelOut of memory: Killed process 5387 (iptables). Sep 20 12:49:43 2011KernelOut of Memory: Kill process 5389 (iptables) score 591 and children. Sep 20 12:49:43 2011KernelOut of memory: Killed process 5389 (iptables). Sep 20 12:49:48 2011KernelOut of Memory: Kill process 5391 (iptables) score 591 and children. I see no one has a clue. Anyway, added a copy of the log file. It's just streaming out errors. Serious bug in the new firmware.
View 1 Replies View RelatedCisco Routers :: RV042 Firmware Upgrade Failure To 4.0.2.08-tm?
Jun 28, 2011Tried upgrading my firmware to 4.0.2.08-tm and now I cannot log in via the web interface. The router boots and gets out to the internet. It still allows incoming vpn connections. The login screen displays and will display an error message if I use incorrect credentials, but if I log in properly and am directed to the routers web config homepage at "192.168.1.1/default.htm", I get a 404 error message. Telnet does not work either (not sure if it's on, never used it before) 404 Not FoundThe requested server-side-includes filename, /usr/local/EasyAccess/www/htdocs/default.htm, does not seem to exist.As if the web pages after the login screen got removed or corrupted after the update.
SN is NKS10403247
I realize there is a newer version. Attempted the upgrade incrementally since I could not find documentation specifiying if that was required or not.
Cisco Routers :: RV042 Firmware-update Fails
Nov 17, 2011i got the RV042 and want to update the fw to 4.04.xx . After a few minutes, the browser wanted to perform the update again. I agreed and now, the webinterface isnt available and i cant get a IP from the router. So I tried to reset the router twice. After no success, I performed a factory-reset, which should work when I pressed the reset-button at least for 30 sec.Now the DIAG-LED blinks in a ~5sec rythm.What can I do?
View 2 Replies View RelatedCisco Routers :: RV042 Compatibility Between Older Firmware And New?
Mar 4, 2012We have several RV042 routers with older firmware version 1.3.12.19-tm.We have purchased new RV042 routers as hot spare replacement that's coming with firmware version 4.1 installed.
We have a VPN tunnels between multiple sites using the older firmware version.
My question is: Will a RV042 with firmware version 4.1 connect to a RV042 with firmware version 1.3.12.19-tm and vice versa?
Cisco Routers :: RV042 V3 Hardware After Upgrade From 4.1 To 4.2 Firmware
Feb 5, 2013I have a problem with a brand new RV042 v3 hardware,I upgraded the firmware from 4.1 to 4.2 and now can not see the web interface in firefox, the login appears and the left menu appears, but at the right nothing is shown
I tried doing the firmware rescue util but the same problem happens.if this a know issue? Should I RMA it?
Cisco Routers :: Slow Internet After RV042 Firmware Upgrade?
Jan 31, 2012After upgrading the firmware on my RV042 router to version 1.3.13.02-tm, I am experiencing very slow Internet response on most sites. In some instances, when the page does load, it lacks many graphics. Frequently, I also receive a "server not found"error. In all cases, reloading the page (once it has loaded) results in a complete page display. This is occuring on two MacBook Pros and also on an iPad. The router is a version 1, so no further upgrades are available. I contacted support, but since it is out of warranty, they are unwilling to assist. Prior to the upgrade, everything worked fine, as it has for 5 years.
View 1 Replies View RelatedCisco Routers :: Router RV042 Upgrade To Older Firmware
Dec 13, 2012We have a CISCO RV042. We are about to begin a VIOP service with Vocalocity who state:
The RV042 is a wired router that requires no configuration adjustments for the firmware versions we tested. Version 1 and 2 are compatible. Version 3 is NOT. Firmware Reviewed: 1.3.12.6 | 1.3.12.19
Our router's firmware is : 1.3.8.2 (Feb 12 2007 10:43:08)
Can we upgrade to 1.3.12.6 or 1.3.12.19? What is meant by Version 1, 2 and 3?
Cisco Routers :: RV042 Firmware Upgrade Fail - How To Recover Ability To Access
Jan 31, 2013I attempted a firmware upgrade on my RV042. After an hour, the upgrade was still in progress. I now cannot login into the router using my user name and password (nor the old admin/admin). The router is functioning, but I fear it will eventually fail. How can I recover ability to log in? The Firmward Recovery program doesn't seem to be appropriate for this situation.
View 3 Replies View RelatedD-Link DIR-655 :: Updating Firmware To V1.35NA?
Dec 30, 2010I tried updating my firmware of my DIR-655 from 1.34NA to 1.35NA (Hardware Version: A1/A2).
However, I found something strange while updating the firmware, that made me stop, in order to ask the question.
Previously, when I did an update, I would browse for the location, and put it in, and it would allow me to update from that location.
Now, it will allow it, but when I select to update from the desktop (C:usersderickdesktop),
it comes up with another location (C:fakepath) for the .bin file.
D-Link DIR-615 :: Check To See If Firmware Needs Updating?
May 21, 2011How do I check to see if my firmware needs updating? I want to connect it to a motorola 2210-02.
View 4 Replies View RelatedD-Link DIR-655 :: Recommended Firmware For Updating 1.21?
Aug 9, 2012i have an DIR-655 Hardware Version: A4, with Firmware Version: 1.21.Its dated: 2008/11/13.Do i get any improvement updating? And in such case, which FW should i use? It must be rock solid!
View 3 Replies View RelatedD-Link DIR-655 :: Updating Firmware On Router?
May 9, 2011a friend of mine(from the US) gave me this router. i am currently living here in the Philippines. and as I check my router's homepage, it gives me
Product Page: DIR-655
Hardware Version: A3
Firmware Version: 1.21
when I go to tools>firmware and check for the latest version, I get
Current Firmware Version : 1.21
Current Firmware Date : 2008/10/09
This firmware is the latest version.
I don't experience problems using this firmware but I think it's outdated because most of the users in the forum uses new firmwares.
where can I download firmware that is suitable for my router?? and is it risky?
should i download from the D-Link Philippines website? (the router was not bought here)[URL] or North America Firmwares should work fine on my router?
Cisco Switches :: Updating Firmware SGE2010 Switch
Oct 20, 2012what is the process of updating firmware on a SGE2010.
I would usually use TFTP - but, I can't see the TFTP command on these SGE2010's
D-Link DIR-655 :: Cannot Access FTP Address After Updating Firmware
Dec 3, 2011I updated my firmware to the latest update a and then restored My personnel setting and now I can not access my ftp, I checked my IP address to make sure it didn't change , setting looks like did before update I went from firmware 121 to 135, was there new setting that I have to change to get it to work. I get no log in screen I get Windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access the folder?
Details:A connection with the server could not be established
D-Link DIR-655 :: Stopped Working After Updating Firmware To 3.35
Oct 21, 2011My DIR-655 stopped working after updating firmware to 3.35. Only power light comes on. port4 flashes for a microsecond when I plug it in. Recovery mode has not done anything. Computer acts like nothing is connected through Ethernet, says "No Cable Connected." Only power light stays on the whole time. I am guessing this thing is broken now. when i go through ipconfig, "no media connected." If not whats a good router under a hundred bucks today, had this router since early 2007.
View 10 Replies View RelatedCisco Wireless :: WAP200 Updating Firmware Without Connecting It To Network
Aug 2, 2012I was brought a WAP200 that was giving a client some issues. I've been told the first thing to try is to update/reinstall the firmware. I have the newest firmware file downloaded and saved, and I have the WAP200 plugged in and sitting on my desk.
I reset the access point and connected it directly to my computer with a patch cable, then entered the default IP address (192.168.1.245) to attempt to access the device. No go. Is that supposed to work and something is wrong with it? All I want to do is update the firmware, because if the device has been reset and the firmware reinstalled and it's still not working, then we'll just deem it defective and have it replaced.
Use 192.168.254.254 IP And Configuration Settings Limited And No Option Of Updating Firmware?
Jun 19, 2011i have Aztech DSL605EW wireless modem. I updated its firmware on some philipines Globle Broadband network's firmware. Now the problem is to open its configration I have to use 192.168.254.254 IP and the configuration settings are very limited and there is no option of updating firmware in it. I am stuck with it.
View 3 Replies View RelatedD-Link DIR-601 :: Wireless Router Won't Broadcast After Updating Firmware
Nov 29, 2011I recently updated my firmware for a DIR-601 router and have internet while hardwired, but no wireless. I saved the configuration settings before updating, but this doesn't even matter because my wireless router doesn't even show up in the list of available wireless network connections. Why isn't my router showing up? I tried a few things like unplugging it and resetting it, but nothing seems to work.
View 3 Replies View RelatedD-Link DIR-655 :: Unable To Access Web After Updating Firmware To 1.35NA
May 3, 2011Few days ago, I updated the firmware of my router to 1.35NA and everything seemed to be working fine at first. After a while though, I noticed my Nexus One phone wasn't getting internet through WiFi anymore. It is connected to WiFi still, and it can ping the other devices on the network but it won't connect to the web. I have a Xoom tablet connected to WiFi as well and it is getting access to the web, though it seems to drop web access from time to time too, even before the firmware update. My phone always had a connection to the web through WiFi before the update. The two PCs that have a wired connection work fine. In the router logs, I also noticed that "UPnP renew entry 255.255.255.255 <-> ... UDP timeout:0 'Teredo'" being spammed over and over since the update, which I read has something to do with IPv6?
View 14 Replies View RelatedLinksys Access Point :: WAP610N Updating Firmware
Mar 26, 2012I have a problem updating firmware for an WAP610N access point. The thing is i tryed to update from 1.0.01 to 1.0.03 and the update freezed at 49%. The next day it was restarted but of course it didn't worked again. The question is can i reset it some how so i can retry the firmware update ?
View 2 Replies View RelatedD-Link DIR-655 :: Save Configuration Of Router Before Updating To A New Firmware?
Jun 29, 2011For some reasons, my internet connection keeps dropping more often recently. My laptop still says it is connected to my network but I can just not have internet connection. It was not like that before but it happened more frequently now. What I did was to power off then on the modem and the router and everything will work fine again. I want to upgrade my firmware but I just wonder if I need to save all the configuration before doing the upgrading? If so, then how can I set it back to the old configuration that was saved?
View 5 Replies View RelatedLinksys Wireless Router :: Updating Firmware For E1200?
Feb 28, 2013When I bought my E1200 router my primary (in fact only) computer was a Windows laptop. Since that time I bought a MacBook Pro and have been using that as my primary computer. The Mac is running on the latest OS (Mountain Lion).
I would like to install the latest software to maintain the router on my Mac but I was told several months ago that there was no update available for Mountain Lion. If that has changed, and if so then where can I download the appropriate software?
D-Link DAP-1522 :: Can't Change LAN Connection Type After Updating Firmware
Mar 27, 2012I have my dap-1522 connected to my dir-655 in bridge mode. I was having intermitant connection problems with the dap-1522, so I updated the firmware to 1.41 for version A1. Now when I go to change the connection type to dynamic ip and save, it reverts back to static ip, which makes this thing useless for my network. Why won't it save?
View 6 Replies View RelatedLinksys Wireless Router :: EA2700 Gives Error When Updating The Firmware
Jul 3, 2012I have an EA2700 which I am trying to rollback to the older interface, however it errors out every time I try to install the firmware.All I ever get is this message: Unexpected Error The firmware update did not complete successfully. Please try again later.We've encountered an unexpected error. If the issue continues, please visit our Technical Support site.I've reset the router multiple times, powered it off overnight, re-downloaded the file multiple times, and am still unable to successfully rollback. Sometimes it even errors out when I try to set the password on the router itself and I have to reset it again before I can use the interface.
View 9 Replies View RelatedLinksys Wireless Router :: Wrt54g - Can't Connect To Internet After Updating New Firmware
Dec 6, 2011i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware.
View 6 Replies View RelatedCisco Routers :: Wrvs4400n V2 DDNS Not Updating When IP Address Changes
Apr 19, 2013I have two of the Wrvs 4400n V2 VPN (V2.0.2.1-ETSI) routers in different countries, one in the UK and one in Australia. They are permanently linked using the IPSec VPN tunnel and the dynamic DNS feature (DynDNS.org). I have found that the router in the UK does not update its IP address automatically to the dns website when the UK Internet service provider changes the WAN IP of this router. This makes the IPSEC tunnel go down until I telephone the UK location and ask to force the router to update its IP address with dyndns by restarting it or by using the routers configuration to re-save the password for dynamic dns.
View 2 Replies View RelatedCisco WAN :: Why Does 2811 Routers Boot To ROMmon After Updating IOS
Mar 22, 2012why does my 2811 routers boot to rommon after uploadig IOS c2800nm-ipbasek9-mz.151-4.M1.bin
View 1 Replies View Related
