D-Link DIR-655 :: Cannot Access FTP Address After Updating Firmware
Dec 3, 2011
I updated my firmware to the latest update a and then restored My personnel setting and now I can not access my ftp, I checked my IP address to make sure it didn't change , setting looks like did before update I went from firmware 121 to 135, was there new setting that I have to change to get it to work. I get no log in screen I get Windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access the folder?
Details:A connection with the server could not be established
View 2 Replies
ADVERTISEMENT
May 3, 2011
Few days ago, I updated the firmware of my router to 1.35NA and everything seemed to be working fine at first. After a while though, I noticed my Nexus One phone wasn't getting internet through WiFi anymore. It is connected to WiFi still, and it can ping the other devices on the network but it won't connect to the web. I have a Xoom tablet connected to WiFi as well and it is getting access to the web, though it seems to drop web access from time to time too, even before the firmware update. My phone always had a connection to the web through WiFi before the update. The two PCs that have a wired connection work fine. In the router logs, I also noticed that "UPnP renew entry 255.255.255.255 <-> ... UDP timeout:0 'Teredo'" being spammed over and over since the update, which I read has something to do with IPv6?
View 14 Replies
View Related
Dec 30, 2010
I tried updating my firmware of my DIR-655 from 1.34NA to 1.35NA (Hardware Version: A1/A2).
However, I found something strange while updating the firmware, that made me stop, in order to ask the question.
Previously, when I did an update, I would browse for the location, and put it in, and it would allow me to update from that location.
Now, it will allow it, but when I select to update from the desktop (C:usersderickdesktop),
it comes up with another location (C:fakepath) for the .bin file.
View 9 Replies
View Related
May 21, 2011
How do I check to see if my firmware needs updating? I want to connect it to a motorola 2210-02.
View 4 Replies
View Related
Aug 9, 2012
i have an DIR-655 Hardware Version: A4, with Firmware Version: 1.21.Its dated: 2008/11/13.Do i get any improvement updating? And in such case, which FW should i use? It must be rock solid!
View 3 Replies
View Related
May 9, 2011
a friend of mine(from the US) gave me this router. i am currently living here in the Philippines. and as I check my router's homepage, it gives me
Product Page: DIR-655
Hardware Version: A3
Firmware Version: 1.21
when I go to tools>firmware and check for the latest version, I get
Current Firmware Version : 1.21
Current Firmware Date : 2008/10/09
This firmware is the latest version.
I don't experience problems using this firmware but I think it's outdated because most of the users in the forum uses new firmwares.
where can I download firmware that is suitable for my router?? and is it risky?
should i download from the D-Link Philippines website? (the router was not bought here)[URL] or North America Firmwares should work fine on my router?
View 8 Replies
View Related
Oct 21, 2011
My DIR-655 stopped working after updating firmware to 3.35. Only power light comes on. port4 flashes for a microsecond when I plug it in. Recovery mode has not done anything. Computer acts like nothing is connected through Ethernet, says "No Cable Connected." Only power light stays on the whole time. I am guessing this thing is broken now. when i go through ipconfig, "no media connected." If not whats a good router under a hundred bucks today, had this router since early 2007.
View 10 Replies
View Related
Nov 29, 2011
I recently updated my firmware for a DIR-601 router and have internet while hardwired, but no wireless. I saved the configuration settings before updating, but this doesn't even matter because my wireless router doesn't even show up in the list of available wireless network connections. Why isn't my router showing up? I tried a few things like unplugging it and resetting it, but nothing seems to work.
View 3 Replies
View Related
Jun 29, 2011
For some reasons, my internet connection keeps dropping more often recently. My laptop still says it is connected to my network but I can just not have internet connection. It was not like that before but it happened more frequently now. What I did was to power off then on the modem and the router and everything will work fine again. I want to upgrade my firmware but I just wonder if I need to save all the configuration before doing the upgrading? If so, then how can I set it back to the old configuration that was saved?
View 5 Replies
View Related
Mar 27, 2012
I have my dap-1522 connected to my dir-655 in bridge mode. I was having intermitant connection problems with the dap-1522, so I updated the firmware to 1.41 for version A1. Now when I go to change the connection type to dynamic ip and save, it reverts back to static ip, which makes this thing useless for my network. Why won't it save?
View 6 Replies
View Related
Mar 26, 2012
I have a problem updating firmware for an WAP610N access point. The thing is i tryed to update from 1.0.01 to 1.0.03 and the update freezed at 49%. The next day it was restarted but of course it didn't worked again. The question is can i reset it some how so i can retry the firmware update ?
View 2 Replies
View Related
Apr 13, 2012
I have a Cisco rv220w. I just tried updating the firmware. I used RV220W-Firmware-1.0.3.5.img. It rebooted, and now there is no DHCP and no access to anything. I tried the reset button for 10 seconds. That didn't do anything. The WAN and all the LAN lights light up. Power is on and solid. The light blinks alternating between the DMZ and the blank space to the right of wireless. How can I get this back to factory defaults?
View 5 Replies
View Related
Sep 5, 2011
will updating my RV042 firmware allow me to download larger files? How do I know what version to update to? Our current version is 1.3.7.4
View 1 Replies
View Related
Jun 19, 2011
i have Aztech DSL605EW wireless modem. I updated its firmware on some philipines Globle Broadband network's firmware. Now the problem is to open its configration I have to use 192.168.254.254 IP and the configuration settings are very limited and there is no option of updating firmware in it. I am stuck with it.
View 3 Replies
View Related
Feb 28, 2013
When I bought my E1200 router my primary (in fact only) computer was a Windows laptop. Since that time I bought a MacBook Pro and have been using that as my primary computer. The Mac is running on the latest OS (Mountain Lion).
I would like to install the latest software to maintain the router on my Mac but I was told several months ago that there was no update available for Mountain Lion. If that has changed, and if so then where can I download the appropriate software?
View 9 Replies
View Related
Oct 20, 2012
what is the process of updating firmware on a SGE2010.
I would usually use TFTP - but, I can't see the TFTP command on these SGE2010's
View 1 Replies
View Related
Jul 3, 2012
I have an EA2700 which I am trying to rollback to the older interface, however it errors out every time I try to install the firmware.All I ever get is this message: Unexpected Error The firmware update did not complete successfully. Please try again later.We've encountered an unexpected error. If the issue continues, please visit our Technical Support site.I've reset the router multiple times, powered it off overnight, re-downloaded the file multiple times, and am still unable to successfully rollback. Sometimes it even errors out when I try to set the password on the router itself and I have to reset it again before I can use the interface.
View 9 Replies
View Related
Aug 2, 2012
I was brought a WAP200 that was giving a client some issues. I've been told the first thing to try is to update/reinstall the firmware. I have the newest firmware file downloaded and saved, and I have the WAP200 plugged in and sitting on my desk.
I reset the access point and connected it directly to my computer with a patch cable, then entered the default IP address (192.168.1.245) to attempt to access the device. No go. Is that supposed to work and something is wrong with it? All I want to do is update the firmware, because if the device has been reset and the firmware reinstalled and it's still not working, then we'll just deem it defective and have it replaced.
View 1 Replies
View Related
Sep 5, 2011
I just updated my RV042 to the firmware RV0XX-v4.0.4.02-tm-20110704-code.bin and now im having this error every time that i try to logon in the router? 404 Not FoundThe requested server-side-includes filename, /usr/local/EasyAccess/www/htdocs/default.htm, does not seem to exist.
View 7 Replies
View Related
Dec 6, 2011
i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware.
View 6 Replies
View Related
Apr 19, 2013
I have two of the Wrvs 4400n V2 VPN (V2.0.2.1-ETSI) routers in different countries, one in the UK and one in Australia. They are permanently linked using the IPSec VPN tunnel and the dynamic DNS feature (DynDNS.org). I have found that the router in the UK does not update its IP address automatically to the dns website when the UK Internet service provider changes the WAN IP of this router. This makes the IPSEC tunnel go down until I telephone the UK location and ask to force the router to update its IP address with dyndns by restarting it or by using the routers configuration to re-save the password for dynamic dns.
View 2 Replies
View Related
Apr 20, 2011
i have a new smc router and my local ip address and remote ip addresses are very similar. The remote ip address is updating my dns server but i am unable to ping it. Its something like 122.61.xxx.1 ?
View 8 Replies
View Related
May 28, 2013
I have been struggling to find a DDNS provider from which the IP address can be updated from a Cisco device.One does not seem to support it, (Free-DDNS) other must be paid for (No-IP.org) while the free version does not update the IP address in my case, etc, etc.The device that is directly behind my modem is a Cisco 1801 router.My question is, which DDNS provider works for you when auto-updating the IP address via the Cisco router?
View 1 Replies
View Related
Oct 28, 2012
Why the access controls don't work in firmware 2.07? I have some sites game sites disabled in my DIR-655. When I upgraded the firmware to 2.07, the router just didn't work until I removed all the access controls features that I had enabled. I started over, downgraded to 2.03, re-upgraded to 2.07, didn't bring in my saved settings, had everything with factory defaults. I then created one policy in access controls and added it to schedule, and bingo, the router didn't work after that.
View 1 Replies
View Related
Dec 27, 2011
I upgraded my router from version 1.2 to 1.35NA, through the Tools / Systems page on the router (uploaded the bin file). I am connected to the router via a wired connection.
During the upgrade, the message said I wouldn't be able to access the webpage until 75 secs. I watched it count down the seconds and then when it refreshed, I could not get to my routers page: 192.168.1.2
The DLink Router is connected as a pass through router to my FIOS router, so that I can use the wired ports and I use the DLink as my wireless router (fios router wireless strength was poor).
All the lights on the router are working as though everything is ok. I am still connected to the Internet, so it appears that the pass through of my wired ports is still working after the firmware upgrade, but wireless is not. Not surprising. I expect I may have to upload my settings (which I did save), but since I cannot get to the routers page, I feel a bit stuck.
two more bits of into. I also tried getting to 192.168.0.1, which might be the default? and I cannot get there either. My Fios router is on 192.168.1.1 (and as mentioned, the DLink should be at 192.168.1.2). Fios Router reports that the 192.168.1.2 port is inactive.
View 5 Replies
View Related
Jan 19, 2011
I've been using the web filter with no problem with my A3/1.33NA router until I upgraded to 1.35 last week. After the upgrade, i did a hard reset and re-entered the websites manually from scratch to the DENY list. I didn't even reuse the saved config file. And now the router no longer blocks any of the websites in the webfilter page even when i selected the ALLOW option.
View 14 Replies
View Related
Jan 9, 2013
i have one buffalo aoss accesspoint and i already create an ssid which is cfl. but now iwant to change my ssid as cflho. and i try to change it .but it is not update i save and reboot the device after changing the ssid
View 1 Replies
View Related
Nov 14, 2011
I cannot access my router through IP address or dlinkap. I am trying to connect a bridge for the living room in my house.When I do an IPCONFIG my default gateway as weird characters in front of the actual IP fb23:ff23 etc.
View 4 Replies
View Related
Aug 15, 2012
Ok so for many days I did manage to access the IP address for a livestream, and to go into the advanced setup of the camera. Suddenly, it stops working. i can't access it. What happened?
I enter the IP address into the url field and hit enter. Several seconds pass by.. Then I get this message: "The connection has timed out." and nothing happens.
This is making me upset cause I need to get this camera working NOW! I want to delete everything on the SD car, and also lower the sensor so that it wont record everything including NON movements like it does now.
View 13 Replies
View Related
Aug 8, 2012
I want to do what I thought would have been a simple enough task - block my kids phone/computer after certain hours. Instead of blocking the specified MAC address(es), all my computers does not have internet access. As soon as I disable the policy, internet access is on again. Here's what I did:
[code]...
View 4 Replies
View Related
Jan 7, 2013
In my log I have the message: "Access denied to wireless system with MAC address 0020008E971E". When I checked the vendor for this MAC, it shows Lexmark international inc, which fact make me feel something is wrong. My first thought was that somebody trying to break into my net but I am close to accept that the owner of Lexmark WiFi printer without an idea in networking, just tried to connect it to his network and after failing to do that, it's wired and wireless features are still on. But still could this be bug or something? I am posting some logs when I first discovered the problem and after I granted access to the device with the MAC address 0020008E971E. I forgot to tell you, that before I decided to post here I did firmware upgrade from Hardware version A3 1.10 to 1.35NA (I bought it from US) with factory default restore. The result was absolutely the same - the messages kept coming "Access denied to wireless system with MAC address 0020008E971E". So I granted access to that MAC and checked the logs again. There is a line in the log that stated "primary:"
View 7 Replies
View Related
Mar 25, 2011
Can you use the NA firmware on an EU firmware device?I assume yes, since the hardware is the same?What's the difference between the two?
View 14 Replies
View Related
Aug 23, 2009
I recently switched routers to the DIR-615 and I'm trying to troubleshoot why one of our laptops keeps losing the IP address and gets a self-assigned IP address. I see the following messages in the log, I am wondering if the reason codes are listed and explained somewhere? I tried searching the manual but could not find any information.
View 9 Replies
View Related
