I want to do what I thought would have been a simple enough task - block my kids phone/computer after certain hours. Instead of blocking the specified MAC address(es), all my computers does not have internet access. As soon as I disable the policy, internet access is on again. Here's what I did:
[code]...
Bought DIR-655 from Amazon. Rev. B. Come with 2.00NA firmware. Updated to latest one, and there are a lot of problems, to most of them, I was not able find any solution. Here they start:
1. WIFI SPEED PROBLEMS.No matter what speed, parameters, channel, mode, etc I select, router keeps working on 20mhz channel width. So I never get speeds above 65 mbit. In absolutely same conditions, my DIR-300 B1 (with DD-WRT firmware) gives me stable 150mbit. SO I KINDLY ASK, MAYBE THERE IS A WAY TO FORCE "40 MHZ ONLY" OPTION?
2. PASSWORD PROBLEMS.Router came with no admin password, I enter new password, hit "update" it says - wait 20 sec, after that, login page is displayed, but, new pasword does not works! since it asks again for empty password!
3. FILTERING PROBLEMS.I need to block certain IP address to be accesed by all my computers. Say this is 111.111.111.111 . So I added inbound filter rule, to block access to that IP. It does not works - IP is still accesible.
4. MORE FILTERING PROBLEMS.Since above mentioned method does not works, I have to use "ACCESS CONTROL" feature. It does works, but it causes another problem, with access control enabled, all webpages with form submit stop to work. For example, if I'll have that feature enabled, when I press "post" on this webpage, it instantly will go to "this page cannot be displayed".
I bought this router solely for one purpose - I was happy with speed of my DIR-300, but I needed gigabit for my computers. So I thought, instead of buying separate switch, I'd better buy a router with gigabit. I was suggested to get TP-LINK 1043, since it's quite popular, alternate firmwares available and so on, but I refused to buy it, since I thought that some chinese company does not worth my attention. So I bought this D-Link (for almost 2x price of TP-Link) and having huge problems as you can see.
I have an ASA pair configured to replace a router that hosts a collection of IPSec Tunnels. Tunnels appear to work. I am lab'ing some additional controls that I would like to implement. On the Production Router that i plan to replace with the ASA's the current Tunnels are all wide open (all traffic allowed to pass). I was hoping to lock things down a little without having to reconfigure all of the Tunnels. My though was that an ACL on the Inside Interface blocking selected traffic Out (so into the LAN) should not impact the stability of the Tunnels but allow me to restrict some traffic from entering the LAN. One port that I was attempting to block is RDP 3389. When this ACL is applied to the inside interface it does not block Port 3389 at all. What am I missing? Is it that the trffic is being allowed because it is coming through one of my 'open' Tunnels?
Shouldn't IPSec Tunnel traffic be processed by the Inside Interface ACL just like all other traffic?
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 3389
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 135
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 137
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 138
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 139
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 445
access-list 145 deny tcp 192.168.30.0 0.0.0.255 10.187.10.0 0.0.0.255 eq 389
access-list 145 permit ip any any
ip access-group 145 out interface Internal
This work great on a 2821 Router, but not so much on the ASA.
Why does my E1200 forget my Parental Control Password? This happens almost weekly and I have to use the "forgot password" option. It asks my security question, I answer it and set the new password to the same password it keeps forgetting. Why does this happen? Also, is there anyway to have total 24hr control on the Block Internet Access?
View 4 Replies View RelatedHow to block internet access some of the computers in a network
View 2 Replies View RelatedI need to change my password. There are other computers accessing my Wi-Fi. How do I disconnect them and block so only I can access my account.
View 1 Replies View RelatedI have tried to setup access control by setting up a policy that restricts certain MAC addresses during a period during the day from certain websites. I set up the website filter and a schedule and selected them for the policy. Instead of blocking just the websites on the filter list during the time setup in the schedule, it blocks all websites all the time.I made sure that I setup the policy to 'block some access' NOT 'block all access'.The only thing that seems to work is that only the computers with the MAC address selected are effected.
View 3 Replies View RelatedI may be doing it incorrectly, but I'm trying to configure web access rules. I first set up access control and tell it to use the website filter. I've tried configuring it by both MAC address and IP address (separately, not simultaneously), but it still allows the listed sites in the web filter to get through. Is there something else I need to block or am I not doing something correctly? The network is on DHCP reservation, so IP addresses are always the same. MAC addresses, as I mentioned, don't work, either and they are fixed and logged in the router.
View 9 Replies View RelatedDIR655 with 1.33NA firmware. I'm trying to determine how to block access to the internet for a specific LAN computer when the user knows how to change a MAC address. I don't want to turn MAC control on and grant only to listed computers - the list doesn't accommodate enough MAC addresses, and the client has wireless and wired since it's a laptop. I also don't want to set static IPs on all of the devices since some cannot accommodate that feature.I'm thinking that reserving an IP address isn't ultimately the solution either, since assigning the IP isn't going to work if the MAC changes. how to use access control under these circumstances?
View 1 Replies View RelatedI want to block the sql port access of my server to all except few of my ip addresses while access list on Cisco Router IOS how do i do that.
View 3 Replies View RelatedI have 60+ website domains to allow on my network using Website Fitering. Is it possible to expand it or is there another router out there that has a large amount of domain allowing or blocking?
View 1 Replies View RelatedWhen attempting to configure access controls from the advanced menu I enable the access control checkbox. I then follow the configuration wizard completing each step as directed by the wizard. When I complete the wizard and try to save the rule I get the following error message regardless of how I complete the wizard. "Name can not be empty string". Yes, cannot is misspelled in the message. I have tried every combination of choices in the wizard and many combinations of naming the rule to no avail.
This did work properly on a previous firmware version, probably 1.04 or 1.05. I have not tried back loading to the previous versions to see where it did or did not work. I don't know how well the router goes back and don't really care to reload all the settings again by hand if the automatic recovery doesn't work.I want to use this feature to control what hours certain machines on the network have access to the internet.
I'm trying to block internet access to a range of IP addresses using the Access Control function of the DIR-655 router. Unfortunately, the router does not allow me to block a range of IPs. Instead, I can only create policies based upon individual IPs or MAC addresses. I have over 60 machines I want to block Internet access and I'd hate to have to type them in individually. How do I go about blocking all Internet access (HTTP/FTP/email/everything) for a range of IP addresses? They will have to be able to continue to use the internal LAN.
View 3 Replies View RelatedI would like to use the web access control that is on the DIR-615 along with my 2Wire modem/wireless router. Is this possible? If not is is possible to put the 2Wire modem into bridge mode and purchase a second wireless modem to run along side the DIR-615 that I have so that I can have two separate wireless networks that have two different web access controls in place?
View 1 Replies View Relatedwhen I ping another workstation on my local network I should get back it's local IP but instead I am getting an ip address that resolves to somewhere in Germany! In fact if I ping any bogus name, I mean anything, it returns this same address 62.116.181.25. If I shut down my cable modem then everything resolves correctly. And yes I have DNS relay enabled because it seems to be the only way to get the workstations to resolve external sites correctly.
View 2 Replies View RelatedMy firmware is 1.35NA and have a schedule established. When I try to add a policy for access control, I can select a policy name but when I hit "next", I get an error stating "Internet Explorer has stopped working" and wants to close. I was able to add policies previously but can not any more.
View 3 Replies View RelatedTrying to set up a simple schedule for keeping the kids from staying up all night. I'd had this working on a Linksys WRT54G till it bit the dust. I just want it to block internet after midnight. My problem is that the schedule is triggering the block unpredictably.?
View 3 Replies View RelatedI have a situation where I have tenants connecting to my wireless network and paying towards the internet bill. I am able to control this by using MAC filtering, but I have just realised that this only works for wireless clients.
Is there a way to replicate this for the router's Lan ports? Or possibly even just disable Lan access. The router model is a D-link DSL-2750U.
Region : Austria
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP :
I'd like to make exception keywords in the Access Control but I don't know how I could possibly do this. E.g. I have put in the keyword "apple" to be blocked, so if a domain has the keyword "apple" in it, it will be automatically blocked. What can I do, however, if I want to make an exception for the domain "appletree.com"? I haven't found any way to make an exception to specific domains or keywords.
I have several laptops at home that connect via wireless connection tot he DIR_655. Using the MAC address of those laptops, I want to prevent them from going to certain websites.Under 'Advanced" and "Website Filter", I addes several domain names (websudoku.com for example). I selected "DENY computersaccess to ONLY these sites". I then saved settings.I then went to "Access Control". I clicked on "Enable Access Control".I clicked on "Add Policy" to cdreate a new policy for one of the laptops.When I boot the laptop and go to one of the websites, it still allows me access. The URL/domain name is correct.
View 5 Replies View RelatedRegion : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP :
Setting up access control for one PC. I just want to block all internet access to one PC during a certain time. It seems like my only options in the Access Control page in the GUI is to block websites or domains.
I am using cisco 1841 LAN router, I need to block MAC address i have applied the command access-list 1102 deny 0000.0000.0000.0000 mac address..... but it does not work.
View 24 Replies View RelatedI want to control bandwidth of our computers in network. We are using TPLINK routers. I already done ipqos setting in the main router but it doesn't really effective. I also tried ipqos in the routers(which is used as WAP) but it also not effective.
View 8 Replies View RelatedI have been looking into this router, I would like to know if I can enable Parental controls or access restrictions to block a MAC or IP address; from 03:00 AM - 06:00 AM ?Instead of Midnight to 6:00 am.My E4200 works just fine, Just would like to know if the EA6500 Can do that ?
View 7 Replies View RelatedRegion : UnitedStates
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : TL-WDR3600_V1_120820
ISP : Cox cable
It doesn't matter how I set it up, once the policy is enabled nothing can get through. This is the same for "deny" or "allow" as default. Is there bug with this new firmware TL-WDR3600_V1_120820??
For some reason I can't get Access Control/Webaccess Filters working on my Dir-655 w/ 1.35NA. I've tried it with MAC and IP Address without any success. I've also enabled/disabled/enabled DNS Relay, recreated the rules, recreated the filters, etc. Nothing.
View 14 Replies View RelatedI'm trying to set up a website filter on my DIR-601. I created a policy for 2 MAC addresses, with a schedule from 10AM-6PM, selected "Block some websites", and disabled logging. Under website filter, I added some entries, and selected "DENY computers access to ONLY these sites". When the policy is enabled, and I try to access one of the blocked websites, it gets blocked correctly ("The URL access was denied by administrator.") However, for all other websites, I get "server unexpectedly dropped the connection" errors, eg "Safari can�t open the page [URL] because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again." or in Chrome "No data received. Unable to load the webpage because the server sent no data." This happens with ALL non-blocked websites. I'm using hardware version A1, firmware version 1.01NA.
View 2 Replies View RelatedI am looking a way to allow/block certain users to access internet.
View 2 Replies View RelatedI am trying to allow a block of 7 or 8 devices to access the internet all the time. Two other devices I would like to allow internet access during a set time range. Finally I would like to block internet access to all devices not in one of the above groups. I need to use MAC addressing to identify the allowed devices. I was able to do this with my old WRT-54G but the DIR-825 is giving me trouble.My main problem occurs when I try to block access to "Other Machines". When I do that all devices on my network are cut off the internet.
View 5 Replies View RelatedAnd I can't seem to access Google and Youtube on my iPad, even Yahoo doesn't work. It all started when I updated my DIR-655 to the newest firmware 2.07NA because I wanted to have an Open NAT for my PS3 because it was set on Strict and I wasn't able to fix it other than updating my router. Now, Youtube works, but I can't play any videos, it's keep in a infinite loop. And I can't access some sites, such as Google, Youtube Facebook and Yahoo, on my iPad, it just won't load.
I just don't know what to do, I'm not really a crack when it comes to router, I don't know jack about my router to be honest, I know how to set the Wi-Fi, forward ports but that's basically all. It seems that it is a firewall problem, but I don't even know how my firewall settings works! UDP and TCP are set on Endpoint Independent but putting them into default doesn't do much, well it does nothing.
it is starting to get ridiculous, the DIR-655 is full of problems! My connections was always jumping, IP Conflict but now it's fixed, Flash videos wasn't able to run outside Youtube
My Dlink DIR-615 had worked flawlessly for almost 7 months now.But since last week it started showing problems.All the computers connected to LAN thru the switch could not access the Internet but the Server(192.168.0.100) which is connected to the DIR-615 could connect to the internet.the above screenshot was captured thru a laptop running Win7 Ultimate connected to the DIR-615 thru WiFi-n.Even after repeated Reloads the same error cropped up in the browsers in the computers connected thru the switch.The computers connected to the switch could access the Internet after I restarted the router.
View 7 Replies View RelatedI have 2 Windows 7 desktops that are both connected to seperate vonage boxes and those vonage boxes are connected to my D-Link DIR-655 router. That D-Link router is getting its connection from a Comcast router. I am looking to get one of the desktops to share a printer from the other one which has it hard wired via USB cable. When I first set this up I did not have the vonage boxes and the desktops were connected right into the router and everything worked fine. Now that the vonage boxes are in place it is a mess. I can get internet fine on both machines, but no file/printer sharing. I have followed all the steps to setup the correct workgroup and file and printer sharing options on both windows 7 machines but they cannot see each other at all. My feeling is that now that the vonage boxes are there that instead of the desktops looking at the D-Link router for its sharing option they are looking at the vonage boxes and that is why they cant be seen. Does this make sense? Is there a firewall on the vonage boxes stopping these two desktops from seeing each other? Do I have to change something on the D-Link router options for it to give access to the vonage boxes for these 2 machines to see each other for printer/file sharing?
View 1 Replies View RelatedI'm student from IT school and i have a school project but i have a problem on packet tracer.In a vlan, i must block the communication between computers in it but i dont know how i must do that.Effectively, it's about 250 computers in this VLAN but each computer can't caommunicate between us.
View 4 Replies View Related