D-Link DIR-601 :: Website Filter / Access Control Causes Dropped Connection For Non-blocked Sites
May 4, 2011
I'm trying to set up a website filter on my DIR-601. I created a policy for 2 MAC addresses, with a schedule from 10AM-6PM, selected "Block some websites", and disabled logging. Under website filter, I added some entries, and selected "DENY computers access to ONLY these sites". When the policy is enabled, and I try to access one of the blocked websites, it gets blocked correctly ("The URL access was denied by administrator.") However, for all other websites, I get "server unexpectedly dropped the connection" errors, eg "Safari can�t open the page [URL] because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again." or in Chrome "No data received. Unable to load the webpage because the server sent no data." This happens with ALL non-blocked websites. I'm using hardware version A1, firmware version 1.01NA.
View 2 Replies
ADVERTISEMENT
May 2, 2011
I have several laptops at home that connect via wireless connection tot he DIR_655. Using the MAC address of those laptops, I want to prevent them from going to certain websites.Under 'Advanced" and "Website Filter", I addes several domain names (websudoku.com for example). I selected "DENY computersaccess to ONLY these sites". I then saved settings.I then went to "Access Control". I clicked on "Enable Access Control".I clicked on "Add Policy" to cdreate a new policy for one of the laptops.When I boot the laptop and go to one of the websites, it still allows me access. The URL/domain name is correct.
View 5 Replies
View Related
Aug 28, 2011
For some reason I can't get Access Control/Webaccess Filters working on my Dir-655 w/ 1.35NA. I've tried it with MAC and IP Address without any success. I've also enabled/disabled/enabled DNS Relay, recreated the rules, recreated the filters, etc. Nothing.
View 14 Replies
View Related
May 16, 2013
I noticed that no matter what URL I put for a website using HTTPS such as Facebook [url]...
View 1 Replies
View Related
May 11, 2011
My internet provider have blocked a website. I know there is a way to bypass the block and go to the website, without using websites such as Hide My ***! Free Proxy and Privacy Tools - Surf The Web Anonymously.
View 1 Replies
View Related
Jan 27, 2012
I would like to know how you can unblock the blocked port to access website on LAN
View 1 Replies
View Related
Jan 12, 2012
I had the website filter ON and it was working very well to block a few websites on a schedule. And after a few month, it doesn't work any more. While it is possible that I scewed up the setting , I have tried so many settings.
So:DIR655 fw 1.32NA,hw A3,"Enable access control" is on with the desktop MAC address (used copy this MAC)(I have also tried my laptop MAC),web site filter is set to "deny",the router time is set using NTP dlink server,
View 3 Replies
View Related
Jan 10, 2012
i need to block internet on all computers in our clinic except few websites (URL) that we need. I'm doing this on the router in WEBSITE filter in the manner of DISABLE ALL, except...
Specifically i have issues with using FAX client. ringcentral.com is ENABLED on the router, so anything within this DOMAIN will work (as forum.ringcentral.com etc.)
BUT when i attempt to send a fax, it falls into a black hole. although the client application shows - being sent, it wont go to SENT items and it just disappears. When i disable the website filter on router, it works.
there must be a different URL that the ring central call controlled tries to connect when sending. Receiving works no problem even with the website filter on. How do i detect / intercept what ULR / IP address is truing to be reached so i can enable it on the website filter ?
View 3 Replies
View Related
Mar 29, 2013
Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V4
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : DEMON
I'm using parental controls to block all devices in the house from using tumblr. I cannot do this at a device by device level as it is being used on iphones/androids, laptops and desktops.Unfortunately, the way that tumblr works is that it use many URLs for the different pages people set up so it is not just a case of blocking url... - so I'm struggling to work out if I can do this via URL blocking on the router settings. How to do this at router level.
View 3 Replies
View Related
Aug 26, 2012
i've had my netgear wireless router for about a year now.i went to facebook and i recieved a message on a red and black screen t hat said this site has been blocked by netgear fire wall. i've never changed any of my setting since i got this router so i'm not sure why all of a sudden certain sites have been blocked.. i've tried logging into my account to try to change my settings using my default username and password but it keeps saying that i dont have access.
View 5 Replies
View Related
Jun 1, 2011
I have a Netgear wnr3500 for my home network. I have certain sites blocked from inside it, for instance.I even blocked it by exact url. Still gets through then blocked yahoo.com and it was immediately Netgear blocked.It seems this site is fooling my router.
View 3 Replies
View Related
Dec 2, 2012
It's a newsgroup site that I subscribed to. So far, this is the only website I know of that they blocked.
View 5 Replies
View Related
Mar 26, 2013
My Company Website IP Gets blocked on my Internet Connection and i have to disconnect and Reconnect to the ISP to solve the problem, all other sites work fine only my website address gets blocked, we use emails of our company site and this may be the reason, but i cant fix the issue
View 4 Replies
View Related
Feb 1, 2011
I am using wireless connection and my VPN connection ets dropped all the time. Are there any settings I need to change?I am using juniper networks client. Is there any settings I need to change?
View 1 Replies
View Related
Sep 22, 2012
My main goal i want to filter certain sites including facebook not to be accessible within the network and block all torrets including maliciuos site. I was advised to get Cisco ASA 5505 which i already got a quote. But now i want to know if is the ASA 5505 good enough for this purpose, is there anything additional required to succesfully overcome my main goal?
View 5 Replies
View Related
Apr 6, 2012
i have been trying to forward port 25565 for a server on a game called minecraft. I have a bt homehub 2 and i have followed everything on portforward.com and on several videos and still no luck. I have B.T net protect plus so I don't know if the firewall is blocking the port
View 1 Replies
View Related
Mar 12, 2013
everytime i try to get into my hotmail account i get a sign to say internet explorer has blocked this website with security certificate errors, what can i do ?
View 1 Replies
View Related
Jun 1, 2011
I have had the ASA 5505 set up for over 5 years, no problems. For some reason there is one website that my users cannot access. [url].... (173.161.122.9). Why it is being blocked.
[code]....
View 5 Replies
View Related
Mar 30, 2011
I've been having a number of issues with performance on my DIR-655 with streaming media, internet connection being dropped and random reboots. Over the last couple of weeks it has been getting worse, to the point where I'm about to act out the printer scene from Office Space but with my DIR-655! It has been rebooting, completely killing WiFi networks and Internet Connection, almost every 20 minutes when I'm watching DivX over the network. The relevent information about my network is as follows:
-Hardware:
-D-Link DIR-655
-Hardware Version: A3 (US) , Firmware Version: 1.34NA
As an experiment I reconfigured the DSL-380T into PPPOE mode and set the DIR-655 into DHCP Client. This was over 2 hrs ago. So far - no random reboots, no jittering on the Media Center Extender playing videos, no internet drop outs..It seems to me that the DIR-655 doesn't cope well when it has to do the PPPOE network protocol as well as the routing, WiFi and other basic functionality that it should be able to cope with.I'll leave it running as it now is and report back later, but from the dramatic change in behavior I'm hoping that I've finally cracked my perf issues with the DIR-655.
View 1 Replies
View Related
Nov 30, 2011
Is it possible to get both allowed and blocked web access logging? I'm using the 2.06NA firmware and no matter how I configure the router, I just can't get it to work, so either I'm missing something or the firmware has a defect, I hope its me, but I fear its a defect.
View 6 Replies
View Related
Sep 4, 2006
I've a BEFW11S4 router that was working fine for 5 years, until the other days it would not let me go to url... but any other websites works just fine.
View 9 Replies
View Related
Dec 6, 2012
Region : UnitedKingdom
Model : TD-W8951ND
Hardware Version : V1
Firmware Version : Latest
ISP :
In trying to make sure it was NOT wide open to the internet (amongst many other problems of setting it up, which I ,may address later if I can actually connect to the thing ever again) I told it to only accept connections from a range of address inside the LAN. Now it wont accept anything except telnet from the LAN.Short of wiping out 6 hours of trial and error configuration and resetting it, are there any other options I can exercise via the telnet interface?
View 2 Replies
View Related
Oct 24, 2012
I have tried to setup access control by setting up a policy that restricts certain MAC addresses during a period during the day from certain websites. I set up the website filter and a schedule and selected them for the policy. Instead of blocking just the websites on the filter list during the time setup in the schedule, it blocks all websites all the time.I made sure that I setup the policy to 'block some access' NOT 'block all access'.The only thing that seems to work is that only the computers with the MAC address selected are effected.
View 3 Replies
View Related
Mar 2, 2010
I may be doing it incorrectly, but I'm trying to configure web access rules. I first set up access control and tell it to use the website filter. I've tried configuring it by both MAC address and IP address (separately, not simultaneously), but it still allows the listed sites in the web filter to get through. Is there something else I need to block or am I not doing something correctly? The network is on DHCP reservation, so IP addresses are always the same. MAC addresses, as I mentioned, don't work, either and they are fixed and logged in the router.
View 9 Replies
View Related
Dec 31, 2011
DIR655 with 1.33NA firmware. I'm trying to determine how to block access to the internet for a specific LAN computer when the user knows how to change a MAC address. I don't want to turn MAC control on and grant only to listed computers - the list doesn't accommodate enough MAC addresses, and the client has wireless and wired since it's a laptop. I also don't want to set static IPs on all of the devices since some cannot accommodate that feature.I'm thinking that reserving an IP address isn't ultimately the solution either, since assigning the IP isn't going to work if the MAC changes. how to use access control under these circumstances?
View 1 Replies
View Related
Feb 10, 2013
My bsnl wimax connection has stopped working on my laptop...IT WORKS ON MY FREINDS' LAPTOP. On my laptop (windows 7), in the taskbar, it shows connected and everything seems fine but i cant access any sites or download anything? Does this have to do with a bluetooth device i installed a few days back or some other issue.
View 3 Replies
View Related
May 23, 2011
I have 60+ website domains to allow on my network using Website Fitering. Is it possible to expand it or is there another router out there that has a large amount of domain allowing or blocking?
View 1 Replies
View Related
Feb 26, 2008
When attempting to configure access controls from the advanced menu I enable the access control checkbox. I then follow the configuration wizard completing each step as directed by the wizard. When I complete the wizard and try to save the rule I get the following error message regardless of how I complete the wizard. "Name can not be empty string". Yes, cannot is misspelled in the message. I have tried every combination of choices in the wizard and many combinations of naming the rule to no avail.
This did work properly on a previous firmware version, probably 1.04 or 1.05. I have not tried back loading to the previous versions to see where it did or did not work. I don't know how well the router goes back and don't really care to reload all the settings again by hand if the automatic recovery doesn't work.I want to use this feature to control what hours certain machines on the network have access to the internet.
View 15 Replies
View Related
Jan 9, 2010
I'm trying to block internet access to a range of IP addresses using the Access Control function of the DIR-655 router. Unfortunately, the router does not allow me to block a range of IPs. Instead, I can only create policies based upon individual IPs or MAC addresses. I have over 60 machines I want to block Internet access and I'd hate to have to type them in individually. How do I go about blocking all Internet access (HTTP/FTP/email/everything) for a range of IP addresses? They will have to be able to continue to use the internal LAN.
View 3 Replies
View Related
May 21, 2012
I would like to use the web access control that is on the DIR-615 along with my 2Wire modem/wireless router. Is this possible? If not is is possible to put the 2Wire modem into bridge mode and purchase a second wireless modem to run along side the DIR-615 that I have so that I can have two separate wireless networks that have two different web access controls in place?
View 1 Replies
View Related
Jul 7, 2010
Is there any way to log if a URL/website has been accessed? It seems that the "Access Control" section would do this, but I don't know how this works nor how to view the logs.
View 2 Replies
View Related
Oct 16, 2011
I'm using my 655 as a WAP, so nothing is connected to the WAN port. Since I run a SBS2008 in my home, I also have the 655's DHCP disabled.If I enable Network Filtering, everything inbound/outbound on the LAN ports works except accessing the Admin page. Even if I put the connecting PC's LAN MAC in the tablet.
View 9 Replies
View Related
Mar 26, 2012
I need to restrict access or rather, block altogether if i can, access of one of the computers on my local wireless network, to online multi-player gaming sites, in particular Age of Empires and Voobly.com, which also uses a messenger type program for them to chat.I've searched and searched online, but alas, have come up with nothing that i understand. I've tried doing the block ports thing, but am unsure if what i've been doing is right. I have blocked Voobly.com under domain and URL settings via the router admin page, but for some reason, it only seems to be denied on my computer. I even went so far as to register and download relevant programs to my computer, for Voobly, so i could see if the blocking worked. Seems it's only my computer that's blocked, i didn't specify ip or mac addresses.I am unable to get on the other computer as it's not mine, and it's also password locked. I don't know the password
View 1 Replies
View Related
