D-Link DIR-825 :: Pinging Local Computers On Network Brings Back A Foreign Ip Address

May 23, 2012

when I ping another workstation on my local network I should get back it's local IP but instead I am getting an ip address that resolves to somewhere in Germany!  In fact if I ping any bogus name, I mean anything, it returns this same address 62.116.181.25.  If I shut down my cable modem then everything resolves correctly.  And yes I have DNS relay enabled because it seems to be the only way to get the workstations to resolve external sites correctly. 

View 2 Replies


ADVERTISEMENT

Cisco WAN :: 887VA ADSL - Service Policy Brings Down Link?

Aug 7, 2012

Have installed an 887VA on the end of a ADSL connection. The provider has specified EF 150 on the link. The router is configured using a Virtual Template.
 
If the Virtual Template has a service policy applied, we don't have connectivity to their main site - although the CD and PPP lights are lit. As soon as the service policy is removed, we have connectivity.
 
We've had three sites with the same problem. Two of the sites don't have QoS specified on the link but had the same problem if the service policy was applied.
 
Hardware - CISCO887VA-SEC-K9
Software - 15.1(4)M4
 
=== config snippets
 
class-map match-all Voicematch access-group 10
  policy-map Dscpclass Voice  priority 150class class-default
 interface ATM0
bandwidth 1143
bandwidth receive 12334

[code]....

View 3 Replies View Related

Home Network :: Setup A Local Network Between The 3 Computers But Separated?

Jun 28, 2012

i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?

View 6 Replies View Related

Pinging Local Router But Receive Direct Reply From ISP?

Oct 3, 2012

Lost Internet connectivity at home. connected via dsl line to my isp.when i issued ipconfig /all command i noticed that default gateway IP addr was a global ip addr. (77.36.x.x) instead of the usual private address 192.168.1.1. DHCP server had IP address 58.206.x.x when i issued ping 192.168.1.1 command, i got this output: "reply from 77.36.x.x: destination host unreachable" i couldn't access my router's configuration menu by typing 192.168.1.1 in web browser's address field.it's very interesting, because i had network issues before but could access my router's config menu and ping it. but now, i cannot reach my local router but receive reply from ISP's router.

View 10 Replies View Related

Local Network Computers Can't Browse The Internet?

Feb 12, 2011

We have Linux server (CentOS) and nearly 120 computers in the local network (192.168.1.0 255.255.255.0) and nearly 20 computers have their own IP-address (real address). Periodically the 192-network computers can't browse the Internet; ping to the server is working; computers which have their own address are working properly

View 1 Replies View Related

Local Network :: Unable To Open Folder On Other Computers?

Sep 16, 2011

i have a problem in the my local network.i have 5 computer.i share a Folder on computer 1. i see this folder on another computer but when i want to open this folder on computer 2 ,computer 3,computer 4 and computer 5 show the connect to computer 1 dialogbox and it say must insert username and password.

View 10 Replies View Related

Linksys Wireless Router :: E2500 Can't See Other Computers On Local Network

May 1, 2012

I have a E2500 connected to a cable modem as the base of my home network. Hard wire connected to the E2500 is an linksys 8 port hub and a couple of computers. The 8 port hub is connected to a couple of computers and a xbox. I have the hub as a distro point to cut down on wiring. Wirelessly connected to the E2500 are a variety of laptops, netbooks, ipods, an ipad, a playbook, an iphone, a android phone, a wireless printer and a Ps3. Most of the devices are just using the wifi for internet access. Most devices have been setup with their own ip addresses to avoid ip conflicts. The computers and laptops/netbooks are running either Windows XP, Windows 7 or Mepis Linux. Up until now everything was going as good as can be expected, all the computers could see each other and most could transfer files between each other except when Windows gets picky.In the last few days no computers can see each other. Windows or Linux.Everything can accsess the internet and wirelessly print still just can't see each other. I reset the E2500. I updated the firmware on the E2500. I installed the Cisco Connect software (just in case I was too stupid too setup a router). Still nothing. I can ping other machines from a command prompt in windows or a terminal in Linux and get a good ping back. In the router setup via a browser I can go to the status page and see other devices on the local network but most are just ipods, ipad, playbook and the wireless printer, If I go to the administration page / diagnostics I can ping other computers and get a good answer. I just can see them from each other. I think I've rebooted every thing at least once. Yes the workgroup names are all the same (workgroup) and yes file sharing is turned on on all computers.

View 3 Replies View Related

D-Link DIR-655 :: Need To Block Certain IP Address To Be Accessed By All Computers

Dec 3, 2011

Bought DIR-655 from Amazon. Rev. B. Come with 2.00NA firmware. Updated to latest one, and there are a lot of problems, to most of them, I was not able find any solution. Here they start:

1. WIFI SPEED PROBLEMS.No matter what speed, parameters, channel, mode, etc I select, router keeps working on 20mhz channel width. So I never get speeds above 65 mbit. In absolutely same conditions, my DIR-300 B1 (with DD-WRT firmware) gives me stable 150mbit. SO I KINDLY ASK, MAYBE THERE IS A WAY TO FORCE "40 MHZ ONLY" OPTION?

2. PASSWORD PROBLEMS.Router came with no admin password, I enter new password, hit "update" it says - wait 20 sec, after that, login page is displayed, but, new pasword does not works! since it asks again for empty password!

3. FILTERING PROBLEMS.I need to block certain IP address to be accesed by all my computers. Say this is 111.111.111.111 . So I added inbound filter rule, to block access to that IP. It does not works - IP is still accesible.

4. MORE FILTERING PROBLEMS.Since above mentioned method does not works, I have to use "ACCESS CONTROL" feature. It does works, but it causes another problem, with access control enabled, all webpages with form submit stop to work. For example, if I'll have that feature enabled, when I press "post" on this webpage, it instantly will go to "this page cannot be displayed".

I bought this router solely for one purpose - I was happy with speed of my DIR-300, but I needed gigabit for my computers. So I thought, instead of buying separate switch, I'd better buy a router with gigabit. I was suggested to get TP-LINK 1043, since it's quite popular, alternate firmwares available and so on, but I refused to buy it, since I thought that some chinese company does not worth my attention. So I bought this D-Link (for almost 2x price of TP-Link) and having huge problems as you can see.

View 9 Replies View Related

D-Link DIR-655 :: Access Control - Block All Computers Instead Of Specified MAC Address

Aug 8, 2012

I want to do what I thought would have been a simple enough task - block my kids phone/computer after certain hours. Instead of blocking the specified MAC address(es), all my computers does not have internet access. As soon as I disable the policy, internet access is on again. Here's what I did:

[code]...

View 4 Replies View Related

Cisco WAN :: 2821 - Pinging Loopback Address

Sep 11, 2012

I have a cisco 2821 and have configured a llopback address which I want to use for management, however, I am unable to ping it from a device attached to GigabitEthernet0/0 

View 1 Replies View Related

D-Link DIR-655 :: Refusing Local Connections - No External IP Address

Aug 22, 2011

I couldn't find a section for the 651.

Alright so I have an SSH server running on my network. I can successfully connect to it from a local computer using the server's internal IP address, AND I can connect to it from a remote computer using the server's external IP address (it's properly port forwarded).

However, when I try to connect to the server from a local computer using it's external IP address, I get a connection refused error. Is there something I'm missing?

View 7 Replies View Related

Cisco Switching/Routing :: Ip Address Is Pinging But Not Available In ARP From Core 6500

Apr 30, 2012

I have an Issue.In my networks, 1 single user is facing Network Slowness issue. i needs to check to which port user is coneected in switch to CHeck whether that port has any errors.But problem is, i am providing support from remote location.And my concern LAN segment is Very big,I have only user Ip address details,when i ping the Ip address from Core switch it is pinging. but when i give show ip arp & give Ip address then its not learning and listing out the Mac address to trace down to the specific port.

View 3 Replies View Related

2008r2 Roaming Profile Back To Local

Feb 8, 2012

After completing an AD upgrade to 2008r2 I've had my fill of roaming profiles. I want to change all users back so that their profile is on their pc. Of course ideally I'd like this to occur with the user affected as little as possible. Most users are still winxp but some win7 machines too.

View 18 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1 Using Local Users As Fall Back For AD

Aug 24, 2011

I have ACS 5.1 configured to authenticate users based on Active Directory. I have configured wired 802.1x too, with machine authentication enabled on ACS.When I login with credentials that exist in AD, it works fine. Then I configured Windows Authentication to ask for credentials (popup window). But I experience network disconnection when I login with a local account even though I entered correct AD credentials.I want to do the following: for an account that exist on the machine being authenticated (non-AD account), ACS should check its local database and reply with authentication success if it finds it, so the user is granted network connectivity.I heard about Identity Sequence in ACS. But I still don't see the right configuration,

View 2 Replies View Related

Cisco WAN :: ASA 5510 - Allow Local Network To Access Public Internet Address On DMZ

Mar 14, 2013

I have a Cisco ASA 5510 I am using ASDM 6.1
 
I have a LAN and a DMZ and an internet connection. I am using one of the internet connection IPs to host a HTTP service on a server in my DMZ.  (its the same interface as my internet connenction but a different IP to the one used for internet connectivity)
 
so say my LAN is 192.168.1.x
and my DMZ is 172.168.1.x

I can access DMZ from Lan and vice versa. when i try to access the public IP (or URL) from a pc in my LAN i get nothing.
 
I have enabled DNS rewrite (doctoring) but it is still not working. the HTTP service is available from other sites.

View 1 Replies View Related

D-Link DIR-655 :: Computers Cannot See Each Other On Network

Mar 7, 2011

Am about to set up my new DIR-655. I noticed that the routers default IP is 192.168.0.1  The router it replaces used 192.168.1.1Since I have several devises on the network with fixed IPs 192.168.1.x (printer and Stora) and since I do not want to change them, can I leave them as is?Also, last time I changed the IPs that the router hands out, many computer could no longer see each other on the network, due to firewall issues. So, can I set the router to use a range like 192.168.1.xx even though the routers address is not changed? orshould I just change the router IP to 192.168.1.1 and change the range. Also do I need to change the mask if I do any of this?

View 3 Replies View Related

Cisco AAA/Identity/Nac :: 3750 Fall Back To Local Vlan If Radius Server Is Found

Nov 14, 2012

We have configured following commands on switch to fallback to local Vlan if both radius server (policy persona's) is found dead. For test purpose we shutdown both servers (policy persona's) but fallback didn't work. We have 3750 switch running image 12.2(55)SE6 having following configuration.We do not know whether we configured switch in proper way or do we need to modify it. [code]

View 5 Replies View Related

D-Link DIR-615 :: Wireless Computers Cannot See Rest Of Network

Jun 13, 2011

I'm having problems with my wireless computers seeing the rest of my network. This is my setup. ATT dsl modem into a 16 port netgear gigabit switch into dlink 615 Some computers are hardwired two are wireless All was working well before d-link with the linksys When im on a wireless computer i cant see the other computers hardwired to the network through the switch. When i take a wireless computer and plug it directly into the switch it see the rest of the computers fine.Something screwy is happening between the switch and the dlink router not allowing me to see my shared folders and printer over wifi.

View 1 Replies View Related

Have A Modem And Only One LAN Brings Internet?

Mar 28, 2011

I have a modem and it has these inserts on the back called LAN and only one brings the internet to my computer and i have a xbox 360 and i want both to be able to get to the internet not just one or th other how can i fix this?

View 4 Replies View Related

D-Link Dir-655 :: Computers Getting Only 130mbps In Home Wireless Network

Jun 19, 2011

I recently decided to buy a DIR-655 router to create a wireless network in my home. I hooked it up last night and speeds look fine with my rr standard 10mpbs service. However, I decided to check the wireless status and my macbook, macbook pro, and my desktop computer are only getting at most 130mbps. Is there anything i can do to maximize this and go beyond 130mbps

View 3 Replies View Related

D-Link DIR-615 :: Utility To Show Which Computers / MAC Addresses Are On Network?

Feb 25, 2012

I can see what MAC addresses have a wireless session and I've used MAC Filtering to stop some MAC addresses from using the network at certain times, but they are still getting through to the internet. I don't know if they were to clone their MAC address as to whether this would show up with the cloned address in active sessions list. How I can stop some users from getting through at certain times? Any utility I can use on my Mac (Mac OS X 10.6. to show which computers/MAC addresses are on the network?   

View 5 Replies View Related

Configure Ipsec In Local Lan Between 3 Computers?

Sep 13, 2011

I need to connect 3 computers in local lan by using ipsec on win7. How can I do that? I tried to do something from windows firewall; but I see incorrect header checksum errors in wireshark.

View 4 Replies View Related

Cisco :: IP Is Not Pinging By Other System In The Network

Aug 29, 2012

my system ip not able to ping by other system in my company network but my system is in the network and able to ping other system in the network my system IP have static IP and IP is pinging on by server

View 1 Replies View Related

Can't Access Other Computers On Windows 7 Network With Vonage And D-Link Router

Feb 25, 2011

I have 2 Windows 7 desktops that are both connected to seperate vonage boxes and those vonage boxes are connected to my D-Link DIR-655 router. That D-Link router is getting its connection from a Comcast router. I am looking to get one of the desktops to share a printer from the other one which has it hard wired via USB cable. When I first set this up I did not have the vonage boxes and the desktops were connected right into the router and everything worked fine. Now that the vonage boxes are in place it is a mess. I can get internet fine on both machines, but no file/printer sharing. I have followed all the steps to setup the correct workgroup and file and printer sharing options on both windows 7 machines but they cannot see each other at all. My feeling is that now that the vonage boxes are there that instead of the desktops looking at the D-Link router for its sharing option they are looking at the vonage boxes and that is why they cant be seen. Does this make sense? Is there a firewall on the vonage boxes stopping these two desktops from seeing each other? Do I have to change something on the D-Link router options for it to give access to the vonage boxes for these 2 machines to see each other for printer/file sharing?

View 1 Replies View Related

Linksys Wired Router :: RVL200 / RVS4000 Possible To Assign Public IP Address As Local IP Address?

Feb 28, 2011

Is it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?

View 1 Replies View Related

D-Link DIR-655 :: Can't Browse Local Area Network

Jan 10, 2011

I am not able to browse my local area network. I get internet fine. I have a vista laptop connecting wirelessly and the dir-655 is connected to a giga switch. The rest of my network is connected to that switch.

View 13 Replies View Related

Specific Server Can Only Access Local Computers?

Feb 14, 2011

One of our servers recently lost its outbout network connectivity. It can ping and communiate with any computer on our LAN, but it can't communicate with anything outside our network. It has a statically asigned IP address, and can ping the default gateway. We haven't changed any settings on the firewall or gateway....

View 1 Replies View Related

D-Link DIR 600 Wireless Router Unable To Network Computers But Can Share Internet?

Sep 4, 2011

I'm Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on bothsystems but they cannot see each other in network places. I am unable to sharefiles between the them. I have tried all the procedures mentioned in many forumsbut still not able to find a solution

View 4 Replies View Related

D-Link DAP-1522 :: Devices Local Do Not Show On Network Map

May 17, 2011

This is the configuration I am running:Internet > Cable Modem > Netgear WNDR3700 Router ~~ DAP-1522 > Wired Windows 7 PC + Linux PC + Printer.The Windows 7 and Linus PC's do communicate well to the internet as do any laptops accessing the router wirelessly and any devices wired to the router. That is the good news.

The bad news is that any devices located after the DAP-1522, including the DAP-1522 do not show up on the network map of either the router or any of the wireless laptops. Neither does the Win 7 PC connected through the DAP-1522 show any networked devices, whether through the DAP-1522 or not, even though network discovery is turned on.

Right now the DAP-1522 is set up to function as a bridge and is in "Static IP" mode. I tried changing it to DHCP, but the DAP-1522 will not allow saving that setting, even though it will allow changing it. It just reverts back to "Static IP". The firmware version is 1.31, and the firmware update went well after a workable logon to the admin page was discovered. Also the one-button (WPS) set-up to the router worked as far as allowing an internet connection.

What needs to change to allow all the devices to show up on the network maps and maintain internet access? Ultimately, I would like to stabilize the IP's of the major components of the network to make troubleshooting easier. But to do that the devices need to show up on the network maps, particularly of the router, so they can be added to the IP reservation table by selection.

View 2 Replies View Related

D-Link DIR-655 :: Can't See Hard-Wired Printer On Local Network

Dec 18, 2010

I recently purchased a DIR-655 and everything's working fine -- Internet access, visibility of local shares, etc. -- with the one except accessing to my printer (Brother MFC-7440N) that's hard-wired to a port on the router.After installing the latest PC SharePort Utility on my two Windows 7 desktops, they're both able to connect and use all of the features of the printer (print, scan, etc.). However, I can't say the same for my two Macbook Pro's connected via WiFi (802.11N).  I installed the latest Mac SharePort Utility on both, but neither can "see" the printer.  Caveat:  If I connect the laptops via a LAN cable (ie. hard-wired directly into the router), they're able to see the printer.  how to configure the router (or Mac) to allow them to see the printer? 

View 9 Replies View Related

Tp-link 300mbps Wireless :: Wr941nd - Network Not Works If Two Computers Connects Through Wifi

Jan 2, 2013

Region : Poland
Model : TL-WR941ND
Hardware Version : V3
Firmware Version :
ISP :

I have a problem with files sharing via wi-fi. I can not share files over the network using wi-fi connections. While the network is the cable connection sharing is available. The network also acts as one computer is connected by a cable to the router and the other via wifi. But if the two computers are working through wifi network does not work. Are there any settings in the router, which can cause blocking calls via wifi?

View 1 Replies View Related

Routers / Switches :: How To Share Usb Based Internet One PC To Local LAN Computers

Mar 22, 2013

4 pcs are connected to a adsl bb router having 4 lan ports. i have removed the adsl cable going to the bb router cos bb giving problems. i m then connecting to internet on any one pc using a tata photon usb device. i want to share this internet on other 3 pcs. those 3 pcs are getting their ips from the bb router in 192.168.1.x series. all pcs are pinging to gateway ie 192.168.1.1 but not pinging each other. why?

View 3 Replies View Related

Cisco VPN :: 1921 Loop Back Interface / Static IP Address For Client

Nov 17, 2012

I have a couple a questions answers on which i cant google for a period. BTW maybe i simly use wrong aproach to choose keywords.

1)  Is it possible to assign same ip address to the same client each time  it authenticated, preferably without using DHCP? Im definely sure that  it possible but cant find corresponded configuration examples (my device  is Cisco 1921 with IOS 15.0.1).
 
2)  Is it possible to assign dynamic crypto map to loopback interface (the  purpose to make EASY VPN Server accessible through two interfaces -  maybe you recommend other approach instead?) - as i move workingcrypto  map from phy int to loopback - i cant connect with reason "Phace1 SA  policy proposal not accepted"

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved