D-Link DIR-615 :: Wireless Computers Cannot See Rest Of Network
Jun 13, 2011
I'm having problems with my wireless computers seeing the rest of my network. This is my setup. ATT dsl modem into a 16 port netgear gigabit switch into dlink 615 Some computers are hardwired two are wireless All was working well before d-link with the linksys When im on a wireless computer i cant see the other computers hardwired to the network through the switch. When i take a wireless computer and plug it directly into the switch it see the rest of the computers fine.Something screwy is happening between the switch and the dlink router not allowing me to see my shared folders and printer over wifi.
View 1 Replies
ADVERTISEMENT
Sep 19, 2011
My boss has a WRT150N that he wants to add to our network. The line coming into this router comes from a switch which all of our other computers/ printer are connected to. The router transmits the internet fine, but I cannot access the LAN when connecting through the router. The printer has a static IP. All internet traffic comes through a hardware firewall which is between the outside world and the switch. When I connect the line going into the router straight into a computer, the computer can see the network/print/whatnot fine.
View 4 Replies
View Related
May 23, 2013
I am new to configuring WLC's. Our small business (5-15 wireless devices + 15ish wired) is trying to use a hand-me-down WLC and AP for our office wifi. We have a WLC 2106 directly connected to a 1231G-A-K9 via the WLC's port 8 POE. I am aware Cisco does not recommend this method, but we do not have a configurable switch at our disposal. We do not need separate VLAN's therefore I have left everything untagged. The AP has a static IP setup to allow communication to the WLC since it did not pull one from the WLC.
The AP is getting the correct network information and is showing up on the WLC monitoring page. I am able to connect to the new wireless network and able to ping between devices connected to the same AP. Now here is my question/issue. I cannot get communication from the WLC/AP to the rest of our network via an unconfigurable Netgear switch (FS605v3). After connecting an open switch port from the Netgear switch to port 4 on the WLC, I am lost. I tried giving port 4 on the WLC an address on the office network, but I receive an error stating "the IP information conflicts with another device".
Here is what I have setup on WLC
Virtual - 1.1.1.1
MNG IP-192.168.10.10
AP MNG Ip- 192.168.10.11
Subnet - /24
Gateway - 192.168.10.1
DHCP - 192.168.10.250
DNS - 192.168.10.250
Static Address on the AP's fa0-192.168.10.15
Attempted port 4 setup on WLC
VLAN identifier 0
IP- 192.168.10.25
Mask - /24
Gateway - 192.168.10.1
Port - 4
Our office network setup:
Subnet - /24
Gateway-192.168.10.1
DHCP - 192.168.10.250
DNS - 192.168.10.250
View 1 Replies
View Related
Mar 10, 2013
I am currently connecting my PC to a mobile phone as a Wireless Access Point to give that PC access the internet. I also have a small home network, with one other PC and a Game Console. I own a Linksys E900 Wireless-N300 Router. My problem is this. How do I share that internet connection with the rest of the home network?To the best of my knowledge its not possible to connect my mobile phone directly to my Linksys E900 Wireless-N300 Router.
So my alternative idea is to connect to the internet via one PC, set up that internet connection as "Shared." and then allow the other devices on the home network to connect thru this. My question is how do I set up my Linksys E900 Wireless-N300 Router to allow my other PC and game console connect to the internet? Bridge Mode? PPPoE?
View 1 Replies
View Related
Sep 5, 2011
I have 12 wap4410n to enable wireless connection to a school building with 3 floor. I planned to configure one as a Access point. My doubt is in which AP mode i have to configure the rest as WDS Bridge or WDS Repeater other mode. In each access point i have Ethernet connection to the switch.
View 1 Replies
View Related
Jun 19, 2011
I recently decided to buy a DIR-655 router to create a wireless network in my home. I hooked it up last night and speeds look fine with my rr standard 10mpbs service. However, I decided to check the wireless status and my macbook, macbook pro, and my desktop computer are only getting at most 130mbps. Is there anything i can do to maximize this and go beyond 130mbps
View 3 Replies
View Related
Oct 11, 2011
Whenever I connect to my router via wireless, It slows the network to a crawl, and I can't view websites through the same PC.Now, It only started a few days ago, and I can't find the root cause. This happens in Windows 7, however, it works in Linux with the same PC, in the same location, so it can't be the wireless card going bad. When the computer isn't online, however, everyone other connection, including smartphones, my wife's laptop, PS3, all work. I've tried updating the drivers, flushing the dns, resetting the winsock, ip release/renew, haven't found anything that works.
I've also run numerous virus scans, malware, spyware, and registry scans. The only thing I can think of is something is trying to send a lot of traffic to the router. So far, Malware Bytes, Avast, AVG, and Spybot haven't picked up anything, and I can't find the traffic leak via Windows Firewall or Comodo.
OS: Windows 7 Home Premium
Wireless Card: Asus USB-N13 using Ralink drivers
The only thing I haven't tried is connecting through my ethernet card, but it's not feasible at the moment to move the desktop to the router.
View 14 Replies
View Related
Apr 27, 2012
My home network is up to now all hard-wired, nothing shared etc.I just got an ipad though, so do want to have wireless available now. I would like the ipad wireless router to be isolated so that the desktops run no risk from getting a virus via the ipad wireless connection.So, I was going to buy another router - would I be able to plug that into the wired router, and the desktop also plugged into the wired router, would that keep every part of the network isolated from the others?
View 8 Replies
View Related
Sep 4, 2011
I'm Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on bothsystems but they cannot see each other in network places. I am unable to sharefiles between the them. I have tried all the procedures mentioned in many forumsbut still not able to find a solution
View 4 Replies
View Related
Apr 21, 2011
Limit his bandwidth. but he will only be staying till the end of summer. The new roomie then might be a torrent monkey.Completely shield my other computers from his sight, so to speak. Like I said he's not a hacker but the new roomie might be.
I'd like the router (linksys WRT54G v3 runner latest linksys fw) and the rest of my network (main PC and media server) to be resistant to at least a script kiddie, and hopefully against a intermediate hacker.I'm currently using wifi with WAP2 personal as the router security.
View 8 Replies
View Related
Jan 2, 2013
Region : Poland
Model : TL-WR941ND
Hardware Version : V3
Firmware Version :
ISP :
I have a problem with files sharing via wi-fi. I can not share files over the network using wi-fi connections. While the network is the cable connection sharing is available. The network also acts as one computer is connected by a cable to the router and the other via wifi. But if the two computers are working through wifi network does not work. Are there any settings in the router, which can cause blocking calls via wifi?
View 1 Replies
View Related
Aug 4, 2010
Can the Nexus 7000 provide NTP to the rest of my network? Can it be an NTP server? I have the followign ntp configuration on it, and have used the commit command, but it seems to be ignoring any NTP requests from other devices. [code]
View 8 Replies
View Related
Mar 7, 2011
Am about to set up my new DIR-655. I noticed that the routers default IP is 192.168.0.1 The router it replaces used 192.168.1.1Since I have several devises on the network with fixed IPs 192.168.1.x (printer and Stora) and since I do not want to change them, can I leave them as is?Also, last time I changed the IPs that the router hands out, many computer could no longer see each other on the network, due to firewall issues. So, can I set the router to use a range like 192.168.1.xx even though the routers address is not changed? orshould I just change the router IP to 192.168.1.1 and change the range. Also do I need to change the mask if I do any of this?
View 3 Replies
View Related
Feb 25, 2012
I can see what MAC addresses have a wireless session and I've used MAC Filtering to stop some MAC addresses from using the network at certain times, but they are still getting through to the internet. I don't know if they were to clone their MAC address as to whether this would show up with the cloned address in active sessions list. How I can stop some users from getting through at certain times? Any utility I can use on my Mac (Mac OS X 10.6. to show which computers/MAC addresses are on the network?
View 5 Replies
View Related
Feb 25, 2011
I have 2 Windows 7 desktops that are both connected to seperate vonage boxes and those vonage boxes are connected to my D-Link DIR-655 router. That D-Link router is getting its connection from a Comcast router. I am looking to get one of the desktops to share a printer from the other one which has it hard wired via USB cable. When I first set this up I did not have the vonage boxes and the desktops were connected right into the router and everything worked fine. Now that the vonage boxes are in place it is a mess. I can get internet fine on both machines, but no file/printer sharing. I have followed all the steps to setup the correct workgroup and file and printer sharing options on both windows 7 machines but they cannot see each other at all. My feeling is that now that the vonage boxes are there that instead of the desktops looking at the D-Link router for its sharing option they are looking at the vonage boxes and that is why they cant be seen. Does this make sense? Is there a firewall on the vonage boxes stopping these two desktops from seeing each other? Do I have to change something on the D-Link router options for it to give access to the vonage boxes for these 2 machines to see each other for printer/file sharing?
View 1 Replies
View Related
May 23, 2012
when I ping another workstation on my local network I should get back it's local IP but instead I am getting an ip address that resolves to somewhere in Germany! In fact if I ping any bogus name, I mean anything, it returns this same address 62.116.181.25. If I shut down my cable modem then everything resolves correctly. And yes I have DNS relay enabled because it seems to be the only way to get the workstations to resolve external sites correctly.
View 2 Replies
View Related
Dec 9, 2012
Region : Kazakstan
Model : TD-W8951ND
Hardware Version : V4
Firmware Version : 4.0.0 Build 120207 Rel.10587
ISP : Megalne
I have two comps in LAN (Ethernet) - one (Comp1) in WinXP, another (Comp2) in Win7. IPs for both comps are assigned by DHCP. Internet is available for both Comps and for assigned wireless units. So the router is configured almost well. But I lost my home net: can't see or ping anything in LAN. Setting of static IPs (192.168.1.4 and 192.168.1.6 are permitted)
View 2 Replies
View Related
Jan 4, 2012
I had to change the power adapter on the D-Link ( DI-624 ) and since then the other computers cannot access the internet connection
View 1 Replies
View Related
Nov 2, 2012
I have a dell desktop running windows vista that connects to my wireless router with a cable. I have an HP laptop that is running windows 7 that is wireless.When I look at network computers on the dell I get an error message that says that the computer is not accessible. The same thing happens when I try to log onto the desktop from the laptop. When I try to run the network wizard from the desktop, I see see connect to the internet, connect to a wireless router or access point, setup a dialup connection and connect to a workplace.None of them make sense but I tried connect to a wireless router and got a message that said to set it up manually or set up a flash drive, neither of which makes sense. I tried set it up manually and all that happened is the router setup screen opened up.I tried the same thing on the laptop and the setup the network wizard opened a screen that said choose a wireless router or access point to configure, but nothing ever showed up on that screen.
View 2 Replies
View Related
Apr 15, 2012
I have set up a wireless network in my home using s d-link N+ 300 DIR-655 and the desktop that is directly connected to the modem and router can connect to the internet and my laptop can access the wireless network and get online but I have another desktop that cannot connect to the wireless network. It can see it but when i try and connect i get the message that it was unable to connect or sometimes that i was able to connect but have limited connectivity.
View 6 Replies
View Related
Jan 18, 2011
I have 2 laptop connect to 1 wireless/modem router. Laptop A using Windows XP SP2 Laptop B using Windows XP SP3
How can i link both laptop to shared folder with one another ?
View 4 Replies
View Related
Nov 7, 2012
I have two WRT54GL wireless routers. I have a computer and printer in my office connected to one of them. I'd like to add a computer and printer back in the shop to my network without using a wired connection. Can I use the 2nd wirelss router so that all computers and printers are on one network?
View 6 Replies
View Related
Jun 16, 2013
Cisco 2504 wlc, 1142n ap, windows radius server.
When I click on Network, the only computer that shows up is mine. If I am hardwired then everything shows up (Servers, other workstations). Is this a problem with the radius server or something on the controller?
View 2 Replies
View Related
May 20, 2012
I am using a Cisco 1921. I have created 3 L2L VPNs. Although I can get the tunnel of all 3 up, I can in the case of one ping the LAN IP of the router, and the 2nd on from the peer subnet, but not the other way round. If any one can make sense of this that would be great.. I can see the ACL being fired, Annoying as the first VPN is up and working fine, in both directions.. Would be really grateful of a fresh pair of eyes..
NAT blocking ACL working fine too..
Glasgow#show access-lists
Extended IP access list 101
10 permit ip 172.16.20.0 0.0.0.255 192.168.0.0 0.0.0.255 (966 matches)
Extended IP access list 104
10 permit ip 172.16.20.0 0.0.0.255 192.168.3.0 0.0.0.255 (3606 matches)
Extended IP access list 105
[code]....
View 5 Replies
View Related
Apr 2, 2012
the site has a private wireless network for which I pay a yearly access fee. This gives me a code I can use to gain access each time I connect. We used to be able to have all our family's laptops, etc., connected at the same time using this code, but the site has recently changed the configuration so that we can't do this. Is there any way we can share the connection made by one computer so that we can all access the Internet at the same time? The site is in a remote location that gets poor mobile data coverage and landlines are not an option. The yearly fee is already high, so I can't afford to pay for multiple subscriptions.
View 1 Replies
View Related
Dec 30, 2012
I have 3 computers all running Windows 7 64bit. I had to move my desktop computer to a different room with no ethernet connection so I purchased a Linksys AE2500 usb wireless adapter for it. My router/modem is a Actiontec 2000 which came with my internet. When I have my desktop on and connected to the internet it slows down all the computers on the network and it is really slow. My question is do I have something installed wrong? I used the driver for teh adapter from this site and nothing else has changed.
View 2 Replies
View Related
May 1, 2012
I have a E2500 connected to a cable modem as the base of my home network. Hard wire connected to the E2500 is an linksys 8 port hub and a couple of computers. The 8 port hub is connected to a couple of computers and a xbox. I have the hub as a distro point to cut down on wiring. Wirelessly connected to the E2500 are a variety of laptops, netbooks, ipods, an ipad, a playbook, an iphone, a android phone, a wireless printer and a Ps3. Most of the devices are just using the wifi for internet access. Most devices have been setup with their own ip addresses to avoid ip conflicts. The computers and laptops/netbooks are running either Windows XP, Windows 7 or Mepis Linux. Up until now everything was going as good as can be expected, all the computers could see each other and most could transfer files between each other except when Windows gets picky.In the last few days no computers can see each other. Windows or Linux.Everything can accsess the internet and wirelessly print still just can't see each other. I reset the E2500. I updated the firmware on the E2500. I installed the Cisco Connect software (just in case I was too stupid too setup a router). Still nothing. I can ping other machines from a command prompt in windows or a terminal in Linux and get a good ping back. In the router setup via a browser I can go to the status page and see other devices on the local network but most are just ipods, ipad, playbook and the wireless printer, If I go to the administration page / diagnostics I can ping other computers and get a good answer. I just can see them from each other. I think I've rebooted every thing at least once. Yes the workgroup names are all the same (workgroup) and yes file sharing is turned on on all computers.
View 3 Replies
View Related
Jun 2, 2010
I purchased a E3000 Router to replace a dead Dlink about a week ago..I have 4 wired computers on my network. All in the same workgroup. I have 2 computers connected directly to the E3000, and 2 computers connected to a ProCurve managed switch on the other side of the house. I can ping the computers on the switch side of the network but i cannot see those computers in the network section of windows 7. I can also navigate to them via \ computername.
View 7 Replies
View Related
Nov 4, 2011
How can I see network rate of other computers connected to my WRT54GL wireless router?I have admin password and I want to see how much bytes/sec received and sent from all the computers connected to the router.
View 2 Replies
View Related
May 22, 2013
I am having problems authenticating client computers onto the wireless network using a Cisco AP1252 via radius
Setup:
I have a Cisco AP1252 wireless Access Point connected to a Cisco ASA5510 on subnet X.X.5.Z The access point ip address is X.X.5.101
The ASA on another port is also connected to the wired network on a different subnet X.X.0.Z
On the wired network are two radius servers - Ubuntus servers running freeradius which are running fine and reliably authenticate wired users for ssh connections to the ASA and importantly to the AP1252 as well (The radius servers ip addresses are X.X.0.191 and X.X.0.192)
Problem:
When a wireless user tries to connect to the wireless network via the AP1252 after being disconnected form it for a while (or after waking from a long sleep) they are never authenticated. They just try over and over and never obtain an IP
Interestingly in such a case neither Ubuntu server shows any sign of receiving an authentication request from the AP - Both ubuntu servers are running in debug mode so they show any activity - there is none
Oddly:
If i try to authenticate a user wirelessly to the AP and leave it in the usual state of trying over and over (with no visible activity on the ubuntu servers) BUT then go to a wired machine and attempt to authenticate an ssh connection to the AP1252 using a terminal command ssh user1@X.X.5.101 THEN as soon as I hit enter on that request (and before I enter a password for the ssh connection) THE WAITING WIRELESS USER IS IMMEDIATELY AUTHENTICATED (and the ubuntu server shows the authentication activity for the wireless user
I really do not understand this and cannot use this method to facilitate wireless user authentication 
What might be causing this behavior - it seems like the AP sleeping and the wired ssh request wakes it up so that it sees the pending wireless user waiting and then acts on that completing the wireless user authentication request.
View 11 Replies
View Related
Jul 14, 2011
Our wireless clients that connect through our AP541N cannot see other computers on the network. They can ping other computers by IP and host name and access the internet OK. Mapped network drives can be connected initially but are very unreliable and always end up disconnecting. Restarting the computer does not work. When these computers are wired they see the network as expected. why my wireless network would behave differently then the wired? The wired and wireless networks are on the same VLAN. The wireless clients are all Windows 7 systems.
View 3 Replies
View Related
Feb 16, 2012
I am facing problem with ACE configuration. I want to redirect 443 traffic to my Proxy Server. But I am not able to do this. I want to redirect only subnet 192.168.80.0/24..Then only it is working but I dont have to have this policy to be applied on all the users only one subnet I want to have under HTTPS policy.
how can I apply the policy only on specific subnet so that port 443 traffic can be redirect and rest of all subnets can go direclty to Internet.
View 8 Replies
View Related
Nov 22, 2012
Have Win7 and XP systems in my network wire connected to the router. When IP of both systems are not reserved, each computer can see other network computers and devices, five in total.A good thing that both systems get each time same IPs which even got not changed since I upgraded from E1200.When I reserve an IP for each system exactly that they currently have, both systems loose ability to see other network computers. Network shares not affected, I still can remotely access my XP box remotely from my 7 via RDP by computer name. WDTV Live wirelessly connected to the router can get/update its IP address (no connection issues) but same as others cannot see network resources.
Tried different ways, rebooted, finally ended up with device reset pushing the button.The next day I managed to reproduce the issue, but was able to revert by disabling/enabling of DHCP server.Another issue I got with an external HD connected to the router when some files got converted to folders by uTorrent started from that drive.I had to use Unlocker application to be able to delete folders converted. I can just assume that issue because of anonymous access was enabled to the external disk. No problems when same HD connected to PC USB.
View 9 Replies
View Related
