D-Link DIR-615 :: Utility To Show Which Computers / MAC Addresses Are On Network?
Feb 25, 2012
I can see what MAC addresses have a wireless session and I've used MAC Filtering to stop some MAC addresses from using the network at certain times, but they are still getting through to the internet. I don't know if they were to clone their MAC address as to whether this would show up with the cloned address in active sessions list. How I can stop some users from getting through at certain times? Any utility I can use on my Mac (Mac OS X 10.6. to show which computers/MAC addresses are on the network?
View 5 Replies
ADVERTISEMENT
Dec 5, 2011
how do i assign IP addresses to 10 computers in a network?
View 3 Replies
View Related
Apr 16, 2012
I have a solution of thre ACS.. one primary and two secondaries. My customer report me that in port of the switch where is connected the ACS show two mac address. [code]
View 1 Replies
View Related
Jul 28, 2011
How to identify the OID to show the “total MAC Addresses In Use” on a 6509, This is the value we can see from a show mac-address counters, and I want our Solarwinds system to poll for it.
View 1 Replies
View Related
Jan 19, 2013
I have used all the spots on the form to filter mac addresses. Is there some way to add more? I have a lot of friends that come over from time to time. I also have plenty of my own wireless devices.I like using the mac address filter so not using it is not an option. Hopefully there is a way to add more, instead of being limited to a predetermined amount.
View 3 Replies
View Related
Mar 3, 2011
I recently purchased a HP PHOTOSMART D110 wireless/eprint all in one. I have the dir-615 router and cannot get the printer to show up on my home network.Printer works fine hard wired to pc but wireless not at all. The ip address of the printer is 169.254.147.xx while everything on my network is 192.168.0.xx. Printer says connected for a few seconds then disconnected....I have tried to configure it on a vista and a win 7 machine.Everything else shows up fine on my network, as a matter of fact a friend brought his laptop over and it connected great..
View 14 Replies
View Related
Aug 3, 2011
I am having 2 Pc's and 1 ISP. I am havng a DSl modem cum router. Is it possible to connect two computers with 2 different ip addresses from same ISP? My ip address is a static one btw..
View 3 Replies
View Related
Oct 6, 2011
Netgear DG834 allocates IP Addresses using DHCP to 5 computers and 2 tills, the tills addresses and one computer IP addreess are reserved and fixed, so that data can be downloaded from the tills to this computer. However I had to re-format the computer and the Router now allocates a new IP address to it, which the tills cannot recognise, so I cannot download the data from the tills to the computer. Is it possible to change the newly allocated Computer IP address in the Router back to the old one.
View 9 Replies
View Related
Aug 27, 2012
I have a small business environment that uses a domain controller and supports about 50+ PCs. Starting this morning multiple computers have lost their ability to obtain an IP address. We have rebooted our domain controller and tried various fixes on local machines with no luck.
View 1 Replies
View Related
May 17, 2011
This is the configuration I am running:Internet > Cable Modem > Netgear WNDR3700 Router ~~ DAP-1522 > Wired Windows 7 PC + Linux PC + Printer.The Windows 7 and Linus PC's do communicate well to the internet as do any laptops accessing the router wirelessly and any devices wired to the router. That is the good news.
The bad news is that any devices located after the DAP-1522, including the DAP-1522 do not show up on the network map of either the router or any of the wireless laptops. Neither does the Win 7 PC connected through the DAP-1522 show any networked devices, whether through the DAP-1522 or not, even though network discovery is turned on.
Right now the DAP-1522 is set up to function as a bridge and is in "Static IP" mode. I tried changing it to DHCP, but the DAP-1522 will not allow saving that setting, even though it will allow changing it. It just reverts back to "Static IP". The firmware version is 1.31, and the firmware update went well after a workable logon to the admin page was discovered. Also the one-button (WPS) set-up to the router worked as far as allowing an internet connection.
What needs to change to allow all the devices to show up on the network maps and maintain internet access? Ultimately, I would like to stabilize the IP's of the major components of the network to make troubleshooting easier. But to do that the devices need to show up on the network maps, particularly of the router, so they can be added to the IP reservation table by selection.
View 2 Replies
View Related
Feb 5, 2012
I recently bought and installed a DIR-615 for my home network, and downloaded the Yahoo Widget.
Widget recognizes and display all the config information (LAN, WAN, WiFi) fine, but it does no display any of the speeds (which was the whole idea).
View 2 Replies
View Related
Feb 16, 2013
I found my dir-601 router keeps making arp query to all ip addresses in same network periodically.all dhcp clients are general laptops and smart phone, I don't think there are any arp cheats attack on those devices.is it normal?
model: DIR-601
hardware version: B1
firmware version : 2.00NA
View 7 Replies
View Related
Mar 7, 2011
Am about to set up my new DIR-655. I noticed that the routers default IP is 192.168.0.1 The router it replaces used 192.168.1.1Since I have several devises on the network with fixed IPs 192.168.1.x (printer and Stora) and since I do not want to change them, can I leave them as is?Also, last time I changed the IPs that the router hands out, many computer could no longer see each other on the network, due to firewall issues. So, can I set the router to use a range like 192.168.1.xx even though the routers address is not changed? orshould I just change the router IP to 192.168.1.1 and change the range. Also do I need to change the mask if I do any of this?
View 3 Replies
View Related
Jun 15, 2012
I have a DCS 3420 that is connected via CAT5 to may LAN and 2days ago something happened on the laptop, whenever I open the window in internet explorer on Win XP Pro; the camera just show a black screen.If I use any other computer on my LAN I get a clear picture of the Gate that the camera is focused on...I have checked the laptop drivers and updates but ca not see something wrong.
View 1 Replies
View Related
Oct 12, 2011
I have had my DIR 615 router for about 6 months, and have had no problems. I have a notebook (Sony Vaio) and I also have a Blue-Ray Player and my DirecTV DVR connected by ethernet. Starting a few days ago I was having connectivity issues. At first I could see the network on my Vaio, but the Internet kept coming and going.I did some troubleshooting on the adapter and that seemed to work. Now I am having an issue where every 2 hours or so the wireless drops and the network disappears from the list of available connections on my notebook. I have had my netbook on (connected wireless) and the issues are replicated on that system.
Both of my wired devices do not see any interruption in connectivity. Living in an apartment complex I suspected interference and indeed there are a ton of other networks in range (as per inSSIDer 2.0). As there is no channel that is clearly open, I have set my router to auto channel scan. I also have tried some of the steps outlined in other threads. The thing I am noticing is that when the network connection drops my network (which has a unique name) doesn't even show up on inSSIDer, it just disappears. When working, my network is consistantly in the -25 range on inSIDDer.I should point out also that my notebook is a mere 8 feet from the router, and there are no obstructions.
View 1 Replies
View Related
Jun 13, 2011
I'm having problems with my wireless computers seeing the rest of my network. This is my setup. ATT dsl modem into a 16 port netgear gigabit switch into dlink 615 Some computers are hardwired two are wireless All was working well before d-link with the linksys When im on a wireless computer i cant see the other computers hardwired to the network through the switch. When i take a wireless computer and plug it directly into the switch it see the rest of the computers fine.Something screwy is happening between the switch and the dlink router not allowing me to see my shared folders and printer over wifi.
View 1 Replies
View Related
Jun 19, 2011
I recently decided to buy a DIR-655 router to create a wireless network in my home. I hooked it up last night and speeds look fine with my rr standard 10mpbs service. However, I decided to check the wireless status and my macbook, macbook pro, and my desktop computer are only getting at most 130mbps. Is there anything i can do to maximize this and go beyond 130mbps
View 3 Replies
View Related
Feb 25, 2011
I have 2 Windows 7 desktops that are both connected to seperate vonage boxes and those vonage boxes are connected to my D-Link DIR-655 router. That D-Link router is getting its connection from a Comcast router. I am looking to get one of the desktops to share a printer from the other one which has it hard wired via USB cable. When I first set this up I did not have the vonage boxes and the desktops were connected right into the router and everything worked fine. Now that the vonage boxes are in place it is a mess. I can get internet fine on both machines, but no file/printer sharing. I have followed all the steps to setup the correct workgroup and file and printer sharing options on both windows 7 machines but they cannot see each other at all. My feeling is that now that the vonage boxes are there that instead of the desktops looking at the D-Link router for its sharing option they are looking at the vonage boxes and that is why they cant be seen. Does this make sense? Is there a firewall on the vonage boxes stopping these two desktops from seeing each other? Do I have to change something on the D-Link router options for it to give access to the vonage boxes for these 2 machines to see each other for printer/file sharing?
View 1 Replies
View Related
Sep 4, 2011
I'm Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on bothsystems but they cannot see each other in network places. I am unable to sharefiles between the them. I have tried all the procedures mentioned in many forumsbut still not able to find a solution
View 4 Replies
View Related
Dec 1, 2011
Setting up a home network for someone who does not know any of the settings for the router, "someone" set it up for her. A laptop running Vista was accessing the network, a cable modem is used.I added a Windows-7 desktop, no problem. Connected an HP printer to desktop, no problem. Tried to connect HP printer which has a wireless function to wireless network, no-go, cannot find the security key to configure the printer.Tried to access the router with 192.168.0.1, admin screen shows, user does not know anything about password, tried default username, Admin with blank password, no-go.Reset router,
View 5 Replies
View Related
May 23, 2012
when I ping another workstation on my local network I should get back it's local IP but instead I am getting an ip address that resolves to somewhere in Germany! In fact if I ping any bogus name, I mean anything, it returns this same address 62.116.181.25. If I shut down my cable modem then everything resolves correctly. And yes I have DNS relay enabled because it seems to be the only way to get the workstations to resolve external sites correctly.
View 2 Replies
View Related
Jan 2, 2013
Region : Poland
Model : TL-WR941ND
Hardware Version : V3
Firmware Version :
ISP :
I have a problem with files sharing via wi-fi. I can not share files over the network using wi-fi connections. While the network is the cable connection sharing is available. The network also acts as one computer is connected by a cable to the router and the other via wifi. But if the two computers are working through wifi network does not work. Are there any settings in the router, which can cause blocking calls via wifi?
View 1 Replies
View Related
Sep 17, 2012
Is it possible to share a USB printer via the DIR-825 without having to install a utility? Or, do you need to install the SharePort software on each computer to share a printer?
View 1 Replies
View Related
Jan 8, 2010
Seems pretty obvious to me that D-link is using linux in rev B1 hardware. Its not big secret thou if i have read right from url...why D-link is sticking with this shareport-utility. Even the B1 hardware has common usb-port for sure, which can be controlled by linux and therefore there would be more simple way to get things like printer working with it over network. Also ssh-server support would not be too big investment. right? And why im not so fully changing to openwrt or dd-wrt is that the patches are not in stable tree yet and i think that i can be pretty happy with the current web-ui of dlink and dont have much of time to setup my router for openwrt.
View 4 Replies
View Related
Jul 10, 2011
I tried to upgrade to 2.05NA several times and there always ends up being an issue that support is too sad to give the correct answer to and just puts a consumer thru "jumping thru hoops" and getting nowhere.2.05NA (actually started with 2.03NA) first caused a problem with limiting my upload speed to 1024mb. I happened across the fix on another forum and tried it and it worked. It was the default QoS setting D-Link changed after version 2.02NA and refuses to release a new firmware to fix this for everyone. Why they don't release a new FW that fixes the issue but keeps things promised on the package working is beyond me. Now, I purchased a D-Link DNS-323 and I finally got drives to fill it some time back. If 2.05NA is loaded, the Easy Search Utility will not connect to the NAS. I have tried the version the NAS came with AND the latest version offered. It will see the NAS upon 1st launch of the latest Easy Search Utility, but it will not connect and then it disappears if you relaunch the utility and won't return until a reboot. Bottom Line: it will not connect with 2.05NA loaded. It works fine with 2.02NA.
What is the setting that D-Link has screwed over here also that is causing this problem? It is pretty sad that their own hardware items won't play well together unless you run old FW. What setting D-Link changed that is making the D-Link DIR-825 not connect to the D-Link DNS-323 NAS when the DIR-825 has 2.05NA loaded. I have a DIR-825 Rev. B1 and a DNS-323 NAS with its latest firmware. I am using 2.02NA on the router since that is the only one that works and is the latest stable release(other than the DHCP reserve issue), no matter what D-Link wants to try to make people think. I won't try their support since they NEVER did give me the fix for the QoS upload issue and when I asked them to put it as a sticky in this forum when I found the answer somewhere else....well, there is no sticky as we all know. I would like to be able to have the DHCP Reserve issue working too, but I would like to connect to my NAS more at this point.
View 6 Replies
View Related
May 4, 2013
Region : UnitedStates
Model : TL-WR702N
Hardware Version : V1
Firmware Version :
ISP :
Just got my new TP-Link device and intend to use it in client mode for my new audio receiver to connect to my home network.Trying to configure the device, and I cannot even access the online utility. I tried using the following address:
192.168.0.254
192.168.1.1
None of these seem to work. Tried on Chrome, then Internet Explorer and made sure that the web browser was not set to proxy (it was not set to this in the first place). The address just doesn't seem to connect, and I get a "This page cannot be displayed" note, as if I'm reaching a bad address.
View 1 Replies
View Related
Dec 21, 2012
Region : Others
Model : TL-WR740N
Hardware Version : Not Clear
I seted up router and i coud acces the utility window, then i switced from w7x32 to w7x64 and then i try to acces the utility window i can only see.Username or Password is incorrect.Is the "Caps Lock" enabled on your keyboard? The username and password must be lowercase, please ensure that the "Caps Lock" LED is disabled on your keyboard and try again.Forgot your username or password? Please reset the device to the factory default settings if you have forgotten your username or password. The default username and password are both set as "admin". The settings will be restored to factory default after the resetting.
How to restore the device to the factory default settings?Firstly locate the reset button on the rear panel of the unit, whilst the device is powered on press and hold the reset button for more than 5 seconds, the device will then reboot and restore itself to the factory default settings.no pop up window appears i tried looking this up and the closest thing i found was to un-check the proxy but its not checked so what should i do to be able to access utility window?
View 3 Replies
View Related
Jan 5, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
ISP : TalkTalk
I'm getting to the last barrier to my Router USB printer working..The UPS is seeing my printer now but the last hurdle is the Printer Setup program. It is not comatible with Windows 8 apparently. The one I downloaded of the support site doesn't run either. Any news off one coming out for Win 8?
View 2 Replies
View Related
Jun 8, 2011
The internet connection at our business goes down overnight, every night. We then have to turn off the router and turn it back on. It is not the fault of the ISP, but some setting somewhere, either in the router (SG 310 Snapgear) or in a particular program being accessed each night. Fact is, for the time being we are just trying to find out the precise time when this happens, so we can find out a reason. Is there a utility that can monitor the status and tell you at what exact point it stopped?
View 2 Replies
View Related
Feb 13, 2013
Region : Poland
Model : TD-W8968
Hardware Version : V1
Firmware Version : TD-W8968_V1_120926
ISP :
Recently I've switched to Windows 8 Pro 32bit (from Win XP) and since that moment I have problems with USB Printer Controller Utility. I was able to print test page successfully but printing larger documents (for example PDF file, about 15MB of data needs to be transferred to the printer) results in blue screen of death. Additionally if USB Printer Controller Utility is started "automatically wit Windows" switching user results in BSOD about 30 seconds after the second instance of Printer Controlled is loaded. Right now I've not found any way to use USB Printer connected to TD-W8968 while using W8. WhoCrashes states that the crash cause was Printer Controller Utility. It is very easy to reproduce the crash.
Both firmware and the utility was downloaded from [URL] According to this webpage TD-W8968_V1_USB Printer Controller Utility( For Windows) works in Windows 8.
[URL]
View 3 Replies
View Related
Feb 17, 2013
Region : Romania
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : latest
ISP : RDS
I am experiencing an issue since I bought my new laptop.I connect to the Internet with Windows 8 and TL-WR1043ND.My issue is that ever since I installed the printer utility from the site I hear an ON/OFF sound in my speaker randomly and I can not figure out what`s wrong.I think it`s trying to search for my printer but it it off.Also wi-fi disconnects randomly ever since this application was installed.What can I do to fix this issue.Computer works fine without the application.There is no report about this issue in the Event Viewer.
View 4 Replies
View Related
Jun 27, 2011
I have a DIR-615 rev C1 with the latest firmware (v3.13). I am trying to reserve all the IP addresses in my home network, which includes a printer, 3 computers, a network bridge to a PS3, the PS3 itself, an iPhone, and an A/V receiver. On my network setup page, I can see the MAC addresses under DHCP CLIENTS for the wired Win7 computer, a Win7 computer with a USB adapter, the PS3, the network bridge to the PS3, the iPhone.
[code]...
View 13 Replies
View Related
Mar 29, 2011
I'm using a Verizon DSL router, Mac D-Link Camera Setup Utility (BETA), and Mac OS X 10.6.7. Configuration of camera is as recommended in manual with CAT-5 cable. Green light blinks irregularly in a communicating-with-router manner. The setup utility won't recognize the camera
View 1 Replies
View Related
