D-Link DIR-825 :: How To Add More Mac Addresses To Network Filter
Jan 19, 2013
I have used all the spots on the form to filter mac addresses. Is there some way to add more? I have a lot of friends that come over from time to time. I also have plenty of my own wireless devices.I like using the mac address filter so not using it is not an option. Hopefully there is a way to add more, instead of being limited to a predetermined amount.
View 3 Replies
ADVERTISEMENT
Jul 4, 2012
I installed the 2.06NA on my DIR-655 router and now I'm having problems adding mac addresses to the network filter. The message is "Invalid MAC address". Of course, it doesn't tell me which entry is invalid and I have a number of them. After further checking.. I noticed that one of the MAC addresses is indeed invalid and when I remove it I still get the error message?
View 1 Replies
View Related
Dec 29, 2009
I had no problem running both 2.4 and 5.0 Bandwidth. With WiFi password and without. It does it's job. The 2.4Ghz Range Plus works. I have set up the router on the 2nd floor at the highest it can go. And everyone get's full bars all over the house. I even get 4-5 bars outside in my car on my phone.
The only issue I have with this thing is a damn new netbook I got for Christmas with a Mac Address starting with 0C-EE-E6-XX-XX-XX. The Router finds the Mac Address invalid. In which I can come to understand cause seeing a Mac Address starting like that is completely new to me. Every Mac Address I have, started with 00 except the netbook. So now, I spent days trying to find firmware updates, patches, anything! I even attempted to spoof the Mac Address on the netbook but Microsoft has a bug on Windows 7. (I have the Starter Edition that came with the netbook)
Windows 7 Mac Spoofing works with WIRED Connection. But it does not work with WIRELESS Connection. I used 3rd Party Tools: SMAC and etc... I attempted Registry Edits, I changed even the value key to the "Orginal Mac Address" and it just wont change [New Strings/Network Address Edits included]. I have been banging my head about this for a week now. The Internets has many answers but they did not work. So Spoofing the Mac Address is out of the question. Until Microsoft fixes this bug.
Anyway: Did D-Link release any sort of beta update/driver/firmware or anything to resolve this at all? Is there a modded firmware to force the Router to take this stupid paradox of a Mac Address?
Currently: I have the Router's WiFi Password-ed with Default Factory Settings
{Hardware Version: B1
Firmware Version: 2.02NA}.
View 15 Replies
View Related
Jul 22, 2012
207.NA Firmware, B1 Hardware in use on a DIR-655, Time Warner Cable setup. Nothing to do with Revision, cordless phones,I saw this asked once before specifically here, but it was never answered.After several attacks via our cable network and neighbors, we've HAD to turn on MAC filtering. There are TONS of devices attached normally so two situations popped up:
#1: What happens when you max out the authorized MAC address listings? Does the page get longer when you save/reboot it? Do I have to do it manually from there forward and where can I get down to the core programming level to edit the code and put the MAC's that are around and on 100% of the time to open up the plug-in list on the GUI?
#2: Guest Zone - we NEED a way to have random guests get on our Network with a different password we can randomly change to prevent the outside abuse, etc. but am I understanding what little else has been posted that the MAC filtering also covers the Guest Zone and therefore I have to stick them in there before they could simply log on with the current password? Is there any way to change/stop that without eliminating MAC filtration as a whole?
View 4 Replies
View Related
Dec 5, 2012
When the front-panel WLAN LED light is solid, it indicates that the wireless segment is ready; it blinks during actual wireless data transmission. This is how it behaved for me until I added some MAC addresses to Advanced > Network Filter. Now it stays solid even during wireless data transmission. Even after a reboot. If not, how do I get the blinking back?
View 14 Replies
View Related
Oct 16, 2011
I'm using my 655 as a WAP, so nothing is connected to the WAN port. Since I run a SBS2008 in my home, I also have the 655's DHCP disabled.If I enable Network Filtering, everything inbound/outbound on the LAN ports works except accessing the Admin page. Even if I put the connecting PC's LAN MAC in the tablet.
View 9 Replies
View Related
Feb 25, 2012
I can see what MAC addresses have a wireless session and I've used MAC Filtering to stop some MAC addresses from using the network at certain times, but they are still getting through to the internet. I don't know if they were to clone their MAC address as to whether this would show up with the cloned address in active sessions list. How I can stop some users from getting through at certain times? Any utility I can use on my Mac (Mac OS X 10.6. to show which computers/MAC addresses are on the network?
View 5 Replies
View Related
Feb 16, 2013
I found my dir-601 router keeps making arp query to all ip addresses in same network periodically.all dhcp clients are general laptops and smart phone, I don't think there are any arp cheats attack on those devices.is it normal?
model: DIR-601
hardware version: B1
firmware version : 2.00NA
View 7 Replies
View Related
Aug 31, 2011
I am trying to block port scans originating in the Russian Federation, thousands per day. I entered 77.88.26.0 as the Remote IP Start and 77.88.26.255 as the Remote IP End, setting the action to Deny. It shows in the inbound filter rules list but my linux server still receives thousands of scans daily from an ip address in that IP netblock. My DIR-655 is running hardware version A3 and firmware 1.34NA.
View 8 Replies
View Related
May 10, 2012
A friend of mine has given me a D-link DIR-615 Wireless Router. I only have a copper 10 meg ADSL service. The Router Internet socket is an RJ45, the ADSL Filters are RJ11. Is it possible to get this router to work on an ADSL Filter ? Can you get ADSL Filters with both an RJ45 and BT Phone connection on them, or a converter lead which converts RJ45 to RJ11 to work on the current ADSL filter?
View 5 Replies
View Related
Feb 7, 2013
Model : TD-W8960N
Hardware Version : V1
Firmware Version : 1.4.0 Build 111108 Rel.40398n
ISP : TPG
URL Filter not working
Region : Australia
Model : TD-W8960N
Hardware Version : V1
Firmware Version : 1.4.0 Build 111108 Rel.40398n
ISP : TPG
Cannot get the URL filter to work Just upgraded to latest Firmware but that didn't work?
URL List Type: Deny Allow Disable
Address Port Remove
[URL]
View 1 Replies
View Related
Jan 12, 2012
I had the website filter ON and it was working very well to block a few websites on a schedule. And after a few month, it doesn't work any more. While it is possible that I scewed up the setting , I have tried so many settings.
So:DIR655 fw 1.32NA,hw A3,"Enable access control" is on with the desktop MAC address (used copy this MAC)(I have also tried my laptop MAC),web site filter is set to "deny",the router time is set using NTP dlink server,
View 3 Replies
View Related
May 2, 2011
I have several laptops at home that connect via wireless connection tot he DIR_655. Using the MAC address of those laptops, I want to prevent them from going to certain websites.Under 'Advanced" and "Website Filter", I addes several domain names (websudoku.com for example). I selected "DENY computersaccess to ONLY these sites". I then saved settings.I then went to "Access Control". I clicked on "Enable Access Control".I clicked on "Add Policy" to cdreate a new policy for one of the laptops.When I boot the laptop and go to one of the websites, it still allows me access. The URL/domain name is correct.
View 5 Replies
View Related
Aug 28, 2011
For some reason I can't get Access Control/Webaccess Filters working on my Dir-655 w/ 1.35NA. I've tried it with MAC and IP Address without any success. I've also enabled/disabled/enabled DNS Relay, recreated the rules, recreated the filters, etc. Nothing.
View 14 Replies
View Related
Mar 29, 2013
Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V4
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : DEMON
I'm using parental controls to block all devices in the house from using tumblr. I cannot do this at a device by device level as it is being used on iphones/androids, laptops and desktops.Unfortunately, the way that tumblr works is that it use many URLs for the different pages people set up so it is not just a case of blocking url... - so I'm struggling to work out if I can do this via URL blocking on the router settings. How to do this at router level.
View 3 Replies
View Related
May 4, 2011
I'm trying to set up a website filter on my DIR-601. I created a policy for 2 MAC addresses, with a schedule from 10AM-6PM, selected "Block some websites", and disabled logging. Under website filter, I added some entries, and selected "DENY computers access to ONLY these sites". When the policy is enabled, and I try to access one of the blocked websites, it gets blocked correctly ("The URL access was denied by administrator.") However, for all other websites, I get "server unexpectedly dropped the connection" errors, eg "Safari can�t open the page [URL] because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again." or in Chrome "No data received. Unable to load the webpage because the server sent no data." This happens with ALL non-blocked websites. I'm using hardware version A1, firmware version 1.01NA.
View 2 Replies
View Related
Dec 7, 2011
In my building there are 2 wireless access points connected directly via switch into the router.So the problem is i dont want to set a password for the wireless but i want to be able to filter all computers that are connected wireless to my internet because many of them are mass-downloading torrents movies etc. and it slows the internet massively. What do i need to do to make it like a filter , which would be like a ISA server or something.
View 9 Replies
View Related
Jun 27, 2011
I have a DIR-615 rev C1 with the latest firmware (v3.13). I am trying to reserve all the IP addresses in my home network, which includes a printer, 3 computers, a network bridge to a PS3, the PS3 itself, an iPhone, and an A/V receiver. On my network setup page, I can see the MAC addresses under DHCP CLIENTS for the wired Win7 computer, a Win7 computer with a USB adapter, the PS3, the network bridge to the PS3, the iPhone.
[code]...
View 13 Replies
View Related
Dec 8, 2012
I have a new 601 vers. A1 F?W 1.01NA.I tried the link from FuzzyNuts and read the disclaimer. However, page 10 of the 601 manual actually shows a similar "how to".My lan allocates addresses automatically between 100 and 200. Through cat5e I connected an XPPro sp3 comp lan port to the #1 lan port on the 601. I can log into the 601 router and disable UPnP and Save. But each time I try to do step#3, uncheck DHCP Server and Save, it says "successful",counts down to 0 but when I click on "Continue" it won't. When I try to get back into the 601 router again I get a "no or low connectivity " message.I have tried re-setting the router many times and then I can get back to the same step and it fails to continue each time at the same point.
All I am looking to do here is get a better AP signal in one corner of the house where fridge and cupboards block good reception from the DIR-655 and I have an Ethernet connection available at that location to connect the 601 if I can fix this.
View 11 Replies
View Related
Jan 22, 2012
I found anod secruity network filter driver for D-Link router to install on my pc , I don't use d-link router so it shouldn't be there, and also someone around my area is using my wireless internet connection, this how they must of got in. Now should this be deleted .
View 1 Replies
View Related
Oct 8, 2012
In setup for old RV042 (V1), when updating / adding Mac addresses, the table is always sorted by IP addresses. But in the new oneRV042 (V3) I have, even with latest firmware 4.2.1.02 the list is random, thereby increasing the chance of user entering DUPLICATE IP addr with diff Mac addr. That will result in conflict.If the firmware sorts the DHCP entries by ip addresses, user would be able to catch duplicate ip errors even if the system does not flag the errors. All Cisco smart engineers can you all get the dhcp entries SORT by ip addresses.
View 2 Replies
View Related
Jun 29, 2012
I have upgraded to the new RV042G to take advantage of the gigabit Ethernet speeds and to prepare for when our ISP upgrades our bandwidth. I currently use the RV042 with Protect Link enabled to filter out various categories from our network traffic. I noticed that this feature is not included with the RV042G.
Is this something Cisco will decide to add back in later? In the meantime, how to block content on the network? The basic URL and keyword filter will not meet our needs, since it is much easier to let a service such as Trend Micro manage what is blocked in the categories they offer.
View 2 Replies
View Related
Mar 12, 2013
Find list of all the MAC address of the devices connected to the router?
View 2 Replies
View Related
Nov 4, 2010
I purchased a wireless bridge D-Link DAP-1522 (IP fix 192.168.0.50) to share the Internet connection to two remote devices: WD TV Live HD (IP fix 192.168.0.52) and a Samsung BD P2500 player (IP fix 192.168.0.51: to try the BD-Live) but when I plug it into my network I have an IP conflict and I can not navigate anywhere, even by the computer which control the Netgear router (IP 192.168.0.1 DHCP range 192.168.0.2-192.168.0.49).
I tried with all fixed IP (192.168.0.xxx Subnet mask 255.255.255.0 Gateway 192.168.0.1 DNS 192.168.0.1), but nothing to do, I have the same problem: after a few minutes after plugged the network cable into BD player the network falls.With wired connection (10 m of patch cable!!!) Samsung BD P2500 have no problem (DHCP and IP fix).
Then look closely in the information relating to devices connected to the Netgear router I noticed that all devices connected through the bridge DAP-1522 have the different IP but same MAC address and I think this could be the cause of the problem that creates the Blu Ray when it's connected to the network through the bridge, because he is not identified with any name but only as UNKNOWN as the bridge (a problem that WD Live not seen: same MAC address but is identified by name as WDTVLIVE).
How can I make the MAC addresses from the bridge will be recognized separately from my router/modem Netgear?In the settings of the bridge I noticed that you can enable or disable MAC address cloning, but if the off I would expect that cloning was not done and instead all the devices are identified by the Netgear router with the MAC address of the access bridge.The DAP-1522 masked the MAC address of device that are plugged into bridge.The router has the latest available firm while the original bridge has version 1.20 (the penultimate version available).
View 2 Replies
View Related
Aug 20, 2012
I'm planning to setup a network with more than 300 PCs. I know that using class C address is not enough to allocate number of IP addresses required. What I meant in the preceding sentence is that If I use this network address 192.168.1.0 (class C), it will allow only 256-2 = 254 IP addresses, What about other PCs in the network ?
View 3 Replies
View Related
Nov 15, 2012
I have various unknown Mac addresses on my network,detecting if they are normal/non harmful OR if I've been hacked! I've uploaded a picture of the addresses, the second to the last address is my router's.
View 1 Replies
View Related
Mar 22, 2011
I have various unknown Mac addresses on my network, I need to detect if they are normal/non harmful OR if I've been hacked! I've uploaded a picture of the addresses, the second to the last address is my router's.
View 14 Replies
View Related
Dec 9, 2012
Region : Poland
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : [url]...
I'm having issues with DHCP server not dealing IP after few hours (varies between 1h and 8h) of torrent traffic. If no continuous torrent traffic is applied, the problem does not occur. New wireless devices connect to the wi-fi network, but get stuck on 'getting IP adress'. The problem is with DHCP service or the wireless network service. New wired devices receive IP. The problem is only with wireless devices. I have no additional wireless device, that I can configure the network settings on my own (only phones) to check if it works without DHCP server giving IP. Wired connection is stable, but the bandwidth usage curve becomes somewhat similar to a sinewave.
I did disable the hardware NAT because that feature made the router unstable and caused it to hang up within minutes.
View 7 Replies
View Related
Sep 18, 2011
I have 192.168.2.1 and 10.10.0.1But i cant connect to 10.10.0.1 network from 192.168.2.1 network. What should I do to connect that both are same network I have a Linksys Router.
View 2 Replies
View Related
Dec 5, 2011
how do i assign IP addresses to 10 computers in a network?
View 3 Replies
View Related
May 28, 2012
i create a network topology ( i attached picture) and i don't know what exactly IP addresses should be assigned to routers and switches + there should be five VLAN's created and just one vlan (vlan 2) must see others vlans (for management purposes) and others vlans should not see each other. So i need that: 1) What IP addresses should be on routers and switches 2) How to create a 5 vlans, that they should not see each other, but one should see all, for example where i have to put "tagged" ports where "untagged" or "not member" ports etc.
View 1 Replies
View Related
May 23, 2012
I have a home network with a Netgear N600 as my main router. I have a wirelesss HP printer that accesses fine as does Iphones and Ipad. Then I have hard wires. Off of the main router I have 3 Netgear 5 port switches. 1 switch with a line to bedroom tv and a line to family room tv. 1 Switch at family room TV which goes to Blu Ray, Direct Tv, and Xbox360. 1 switch at bedroom for Blu Ray and Direct TV. Believe it or not, this all worked. I tried to hook up a ZmodoH264 security system (the ones with four cameras, and a separate hard drive and monitor for viewing). I used one of the 4 inputs on the main Netgear router for this, and it seemed to be recognized. But, I can't access the security system mobilly, AND all my network addresses seem to have been screwed as Directv isn't working (Whole Home) and the printer stopped being recognized. However, Blu Rays are still fine. Is there a way with ipconfig to list all of my hard wired nodes? I assume wireless dont show up in a list.
View 4 Replies
View Related
May 28, 2012
i create a network topology ( i attached picture) and i don't know what exactly IP addresses should be assigned to routers and switches + there should be five VLAN's created and just one vlan (vlan 2) must see others vlans (for management purposes) and others vlans should not see each other. So i need that: 1) What IP addresses should be on routers and switches 2) How to create a 5 vlans, that they should not see each other, but one should see all, for example where i have to put "tagged" ports where "untagged" or "not member" ports etc.
View 4 Replies
View Related