D-Link DIR-615 :: Connection Drops And Network Doesn't Even Show Up On InSSIDer

Oct 12, 2011

I have had my DIR 615 router for about 6 months, and have had no problems. I have a notebook (Sony Vaio) and I also have a Blue-Ray Player and my DirecTV DVR connected by ethernet. Starting a few days ago I was having connectivity issues. At first I could see the network on my Vaio, but the Internet kept coming and going.I did some troubleshooting on the adapter and that seemed to work. Now I am having an issue where every 2 hours or so the wireless drops and the network disappears from the list of available connections on my notebook. I have had my netbook on (connected wireless) and the issues are replicated on that system.

Both of my wired devices do not see any interruption in connectivity. Living in an apartment complex I suspected interference and indeed there are a ton of other networks in range (as per inSSIDer 2.0). As there is no channel that is clearly open, I have set my router to auto channel scan. I also have tried some of the steps outlined in other threads. The thing I am noticing is that when the network connection drops my network (which has a unique name) doesn't even show up on inSSIDer, it just disappears. When working, my network is consistantly in the -25 range on inSIDDer.I should point out also that my notebook is a mere 8 feet from the router, and there are no obstructions.

View 1 Replies


ADVERTISEMENT

D-Link DIR-825 :: 5 Ghz Enabled Doesn't Show Up When Scanning?

Dec 15, 2010

I am running a DIR-825 I believe one of the original's no updates or anything.  I run it mixed mode.  The 2.4 shows up and I can connect to but the 5 ghz (n) speed says it's enabled but I can never see it when I scan on any of my wireless n products (laptops and other computers).  Dlink support told me to change to mixed mode g and n.  I was running it in mixed mode (a, g and n).  D link told me to change to mixed mode g and n and to make sure they stay on channel 6 and 11.  Is this correct.  Which firmware should I upgrade to and is there any easy way to do this?

View 4 Replies View Related

Wireless :: Connection Doesn't Show Up On Window Xp

Feb 4, 2011

Wireless connection doesnt show up on Windows Xp, I now if it connected to the internet I could just install updates and it would automatically fix it, but I cant until i get it to connect?

View 1 Replies View Related

Laptop Doesn't Show Wireless Connection

Mar 1, 2012

my laptop isn't showing my wireless internet connection in the list.But my phone is connecting to my wireless internet connection without any problem.I am using a Toshiba Satellite laptop with Windows Vista.

View 3 Replies View Related

Wireless :: Laptop Doesn't Show Wifi Connection

Mar 25, 2011

With ibm z60m laptop i want to connect wi-fi internet modem but laptop does not show wi-fi connection

View 1 Replies View Related

D-Link DIR-825 :: Login Page Doesn't Show Authentication Picture

Nov 29, 2011

i have a dir 825 with fw 2.00eu that i wanted to upgrade to the new beta fw.i went to tools and did a factory reset first,when i wanted to log back in to load the new fw,it sudenly asks for a authentication code,problem is the field is marked with a red x so i cant see any code i'm using windows 7 and IE 9?

View 5 Replies View Related

Cisco Switches :: SF 102-24 MGBSX1 Doesn't Show Any Link Lights Or Traffic

Jul 28, 2011

I just purchased a Cisco SF 102-24 unmanaged 100 series swith with a MGBSX1 mini-Gbic converter.  My goal is to connect this to a building that is connected with a Black Box LH1706A-ST media converter that has 100mb ST fiber connections.  In my testing the Black Box shows both a Fiber link and RJ45 port link at 100mb, but the MGBSX1 does not show any link lights or traffic.  So a computer connected to the Cisco switch is not able to communicate over the fiber connection. 
 
Can the MGBSX1 be connected to a media converter that only has 10/100 ST fiber connectors? 

View 2 Replies View Related

Linksys Wireless Router :: WRT54G Doesn't Show Connection To Internet

Oct 19, 2011

We have a old Router and a new one(the Lynksys). The old one had problems with the Wifi so we bought this one. So when we connect This Router to the Modem it doesn't show connection to the internet. (The Setup fails because of this). But with the old one it does connect to the internet. So either my modem doesn't detect the new router or vice versa. So I am not sure why its not working since on the old one it works fine.

View 1 Replies View Related

No Internet Connectivity / PC Doesn't Show Up On Network

Jan 15, 2012

Every once in a while when logging into Windows (7 Ultimate 32 bit) My PC decides it couldn't find a network connection, usually restarting the computer solved the problem, however now I have seemed to permanently be stuck on the "identifying" stage of my LAN connection. My mobo is an Asrock p67 extreme, the network adapter is a realtek pcie family card.Now I know it is not my modem since I can connect on my other PC in the living room, I verified this with a phone call to my ISP, they couldn't see my PC connected to the network but could see the other one.It is not the Ethernet cords, I switched them and even used a new one. I tried rolling back, installing updated and installing factory drivers for my network card, no change.

I tried turning off the PC, disconnected the power cord, discharged it, left everything off/ disconnected for 30 minutes and reattached, powered on, no change.I made sure my DHCP was on and that my PC was set to automatically retrieve IP/DNS.I even bought a new Ethernet card, installed it and I still can't connect, so its not the realtek card.I can't even access my modem using its UP address, 192.168.2.1 (Bell 2wire) but I can on my 2nd PC, it sees all other devices, PS3 /Smartphones but not my PC.

View 19 Replies View Related

Cisco Switching/Routing :: 3750 - Show Interface Vlan (ID) Doesn't Show In / Out Traffic Rate

Mar 13, 2013

I have configured a vlan interface on a 3750 switch. there is aprox 4Mb active traffic flowing through the interface, but when I do a "show interface vlan (vlanid)" the output show zero bits in and zero bits out. Its a typical L3 config with one IP on the vllan interface acting as the gateway for the VLAN devices. Is this a normal behaviur ? and if so is there any way to get the traffic in/out stats. The end PC/devices are connected to this switch via an L2 TRUNK and I dont have access to the L2 switch on which the actual devices connect. so cant get the real time stats of those interfaces.

View 2 Replies View Related

Scanner Doesn't Show Up At All In Local Network Devices

Nov 12, 2011

Im working for a client at the moment and I've had to setup a network printer for them, I've got 4 Windows 7 machines easily printing over the network to this printer that is connected wirelessly but they want one of there machines to use the scanning functionality of the printer.The scanner doesn't show up at all in the local network devices like the printer does and to be honest i don't really have any experience with scanning over a network to a windows 7 machine, but this printer does support scan to ftp so my idea is to setup a small ftp server on the windows 7 machine with a folder to stored scans on the desktop or something, then put the details of the server in to the printer making it as easy as possible for the customer to scan stuff and just get it from the folder on the desktop, i could also share this folder over the network for anyone to open and get a scan if needs be.

View 2 Replies View Related

New NIC Doesn't Show Up In Network Connections Or Device Manager?

Jan 20, 2011

I put Win7 on a customed pc bought online. The motherboard has an Atheros L1 integrated NIC and I installed a Dlink dge530t NIC into a PCI slot. I know I have to disable the onboard nic but the installed card is not comming up either in Device manager or network connections. What gives? In the bios under integrated peripherals i did enable PnP OS.

View 4 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND Router Doesn't Show 1.5tb External Hard Drive

Jan 6, 2013

Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : WR1043ND

The router is not showing my external hard drive in the usb settings. The Hard drive is a seagate 7200rpm 1.5tb. The hard drive works just fine when plugged into my computer. I have tried NTFS and EXFAT. My 2gb usb drive in FAT32 shows up just fine. The external has its own power supply. Is there anything I am missing that would cause it to not work?

View 5 Replies View Related

Linksys Wireless Router :: E3200 - Network Doesn't Show Up Anymore

Oct 30, 2011

I have a linksys E3200.  Today I got disconnected and when it reconnected it stated that the network was changed to just network and not my usual network name.  I was having connection issues with the network disconnecting me and reconnecting me.  I uninstalled the cisco connect software.  I contacted support who told me to restart the router and modem, which I did.  After reset I tried to reinstall the software.  Cisco Connect likes to insist to do the installation wirelessly but my laptop can't find the router during installation to complete it.  My router is essentially a glorified wire connecting my computer to my modem now. 

View 2 Replies View Related

Linksys Cable / DSL :: WAG320N Network Just Dropped Out / Now Doesn't Show Up In List

Feb 5, 2011

I'm having big problems with my Linksys WAG320N. I'm pretty clueless when it comes to networking.Without changing any of the settings, the other day my Macbook Pro couldn't connect and it kept saying 'Connection timeout'. From that point my iPhone also refused to connect, although accessing the internet on my MBP via Ethernet was fine.
 
I did a hard reset following instructions from this forum then re-configured with the installation CD. The wireless LED on the router was lit but my MBP couldn't see the network. Eventually I managed to connect after rebooting my laptop, and enjoyed all of 10 minutes of problem-free of wireless internet connectivity before the network just dropped out and now doesn't show up in my list of networks again, although the wireless LED is still on. Connecting via Ethernet still works, just not via wireless.I've rebooted my laptop and the router and tried switching channels on the router, all to no avail.

View 9 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR940N - Network Connection Doesn't Have Valid IP Configuration

Mar 18, 2013

Region : Poland
Model : TL-WR940N
Hardware Version : V2
Firmware Version :
ISP :

few days ago i changer my work etc . so i tried to connect to worknetwork wireless but it was connected for 10 minutes and then this message just appear "Wireless network connection doesn't have a valid IP configuration" there is also public network the same ,, connected for few minutes then when i connect again always the said limited access but with my home work is working perfectly but with work or public network always get this msg after few days searching in google nothing useful ps all computers in company are working perfectly with this wireless connection but my laptop no i have this message in router setting WAN port is unplugged,, check photo here [URL] router model TL-WR940N im useing win7 64 hp pavilion dv7 anti virus > deleted firewall state > off IP helper > disabled when i was connecting to public network this is result of Xirrus WI-FI inspector [URL]

View 1 Replies View Related

Belkin Routers :: N300 Constantly Drops Connection / Doesn't Allow Client To Connect

Dec 29, 2012

I have recently purchased a Belkin n300 wireless N router. The problem is, I have to reboot the thing numerous times throughout the day to allow a client to connect to it via wireless. One client will be connected and then drop, or a client will be connected, and I cannot connect another device. I also had an issue with streaming over wireless for netflix on my devices and the only way I could get it to work was to turn off the firewall, what the hek.... This is crap. I knew I should not have bought a belkin router again. Had one years ago and it constantly gave me issues. Had my Linksys Wrt54G for years with no problems until it finally crapped out. Anyways, my firmware version is the latest version according o the website.

View 6 Replies View Related

D-Link DIR-615 :: VPN Connection Drops After 12 Minutes

Jul 16, 2010

I have a DIR-615, hardware version: C1, firmware version 3.12NA and my issue is that it keeps dropping my VPN connection after 12 minutes.  Sometimes it'll go longer than 12 minutes but on average right at 12 minutes of my connection, it drops.  This happens whether I'm using the wireless or hard wired to the router.  As a test, I ran a continuous ping on a computer on my internal network and also to a computer on my corporate network.  When I'm VPN'd in, both pings are successful.  Once the router kills my VPN session, the pings to my internal network are successful.  So the router isn't rebooting or anything like that.  My VPN session will automatically reconnect, but I'm stumped.

View 14 Replies View Related

D-Link DIR-825 :: Connection Drops Every 10-12 Hours

Jun 22, 2012

So I've bought a D-Link 815 on 21st June(day before yesterday) and my connection drops every 10-12 hours and i have to close and open the router(the 192.168.0.1 site won't even work)...i'm using PPPOE connection..

I've bought a D-Link because i heard it's the best on the market and i play online poker so i need a stable connection all day long and more important i need my IP to remain at one value for a long time and not change every 12 hours(i have dynamic IP)

View 14 Replies View Related

D-Link DIR-601 :: Router Drops Connection?

Apr 13, 2012

I have a DIR-601 and the wireless part of the router as far as i can tell, it drops for about a minute and then reconnects on its own, any thoughts? This i getting rather frustrating because it also does with my previous router. I have changed all the wires included the cable from the wall to the main cable box.

View 10 Replies View Related

Cisco :: Understand Show Sessions And Show Connection Commands?

Jan 29, 2012

How to understand "show sessions" and "show connection" commands? And what is the difference between the two?

View 2 Replies View Related

D-Link DIR-655 :: Router Drops Connection About Once A Week

Sep 8, 2011

My router has started to drop its connection every week or so at random times. (its not the IP reset). My indication is i lose internet connection. But when it does this, i cannot even log into the Router. Its like it drops off the network completely.im still running FW 1.10, but im curious if this could be an outside attack as well. Its hard to get this info because i have to reset the router (ie unplug it) and that clears the log.. It also seems to reset the date/time as well.

View 7 Replies View Related

D-Link DIR-655 :: Wired Connection Random Drops?

Apr 12, 2011

I should start by saying I am no novice when it comes to networks but this router has been nothing but a issue since day one.

*The Setup - 2 wired PCS, 2 Wired Macs, 1 Wireless Iphone, 1 Wireless Ipad.
WPA2 Only / AES key, Channel 6, G/N only, Hidden SSID.

*The Problem - 95% of the time the wireless and wired is running fine. However, Sometimes randomly webpages on the computer will stop loading... but heres the kicker... other internet connected programs like Ventrilo, or torrents, or games will still be working and running from the net like there is no problem. When this happens the internet browsers on the macs and PCs will say page cannot be displayed instantly. Happens to all computers at the same time. After about 10min the webpages will load again. I have 16mbs internet and while this is happening my games and voice chat programs do not go up in ping at all.

I have turned off QoS since that made the most sence... but other then that I have no been able to figure it out. I even turned off wireless while it was happening and it still didnt fix it. A sure fire way to fix it is to restart the router.

I am 100% stumped. Do I just have a bad out of the box router? it is only 2 weeks old.

View 14 Replies View Related

D-Link DIR-655 :: Wireless Connection Drops While Gaming

Apr 14, 2011

I have a wired connection to the router and typically all works fine. I have several Ipods and laptops accessing the router wirelessly with no real problems. As soon as I start playing America's Army (2.8.5) on my desktop (wired) my wireless connections all drop and the kids start yelling to turn the internet back on. When I exit the game all goes back to normal...

View 1 Replies View Related

D-Link DIR-655 :: Router Drops Wireless Connection Often?

Nov 12, 2011

I have a brand new dir-655 of the B1 / 2.00NA version. It seems to keep a connection alive, but the wireless signal will suddenly and randomly disappear from all of my devices. I have reviewed this forum for hours and have made many changes to my settings, but nothing seems to keep the wireless signal from dropping.

Deleted the B mode, made sure the DNS entries were present, stick on one channel, etc. There are no other routers here and all of my phones operate on the 5 Ghz frequencies.

I never, not even once in three years, had this problem with the A version of the same router, but now it's a constant problem at least once a day.  Nothing has changed by the router same brand and model but the newer hardware version.

The only remedy I have found is to reboot the router -- my devices will reconnect automatically once the router reboots, but there is no connection discovered once the connection drops regardless of how long the router sits doing its thing.

I've also notices that there are no wireless clients showing under status/wireless...they were there earlier today, but since the latest reboot, gone.

View 14 Replies View Related

D-Link DIR-655 :: Drops Wireless Connection Constantly

Jan 28, 2011

DLink 655 Fully Upgraded Firmware Multiple Laptops have the same issue, each has a different O/S from OSX to xp, vista and win 7. As soon as any laptop tries to download files, youtube, even web pages... There is nothing wrong with my wired connection. The thing is, each laptop gets disconnected then almost instantly reconnected. It is very annoying.The only thing I have found to fix it is turning off my wireless security completely. This is unacceptable! I am a computer scientist and in the security field. Ive tried WEP with both key sizes, WPA-Personal is what I originally was using before I started changed settings.

View 9 Replies View Related

D-Link DIR-655 :: Drops Wireless / Internet Connection

Aug 28, 2012

So I have a DIR-655 and my internet connection drops every day. I have replaced the DIR-655 with a linksys just to try it and it works fine. This has happened with more than 1 of these 655''s. Also I have clients calling saying the wireless drops and it will not let them reconnect until I reboot the router. I have updated to the newest firmware with the same issues. I know its not bad cause I have more than 1 655 doing the same thing at a different location as well.

View 1 Replies View Related

D-Link DIR-615 :: Cannot Get Printer To Show Up On Home Network

Mar 3, 2011

I recently purchased a HP PHOTOSMART D110 wireless/eprint all in one. I have the dir-615 router and cannot get the printer to show up on my home network.Printer works fine hard wired to pc but wireless not at all. The ip address of the printer is 169.254.147.xx while everything on my network is 192.168.0.xx. Printer says connected for a few seconds then disconnected....I have tried to configure it on a vista and a win 7 machine.Everything else shows up fine on my network, as a matter of fact a friend brought his laptop over and it connected great..

View 14 Replies View Related

Wireless :: Network Connection Window Will Not Show?

Apr 23, 2011

Wireless Network Connection window will not show any of avail local networks

View 8 Replies View Related

Wireless Network Won't Show On Connection Page?

Nov 10, 2012

I can't find my linksys network on the "wireless networks" I've been able to use it many other times but just this past week it hasn't been showing.

View 1 Replies View Related

Internet Connection Drops Repeatedly - D-Link WBR-1310

Feb 3, 2012

I have a D-Link WBR-1310 modem and for some reason the internet connection drops every 4-5 minutes and then comes back after 30 seconds.I don't know what the problem is. I tried resetting the modem which didn't work. I tried upgrading the firmware from D-Link's website but it says "The version of setting file is not compatible." for the .bin file.

View 5 Replies View Related

D-Link DIR-615 :: Drops Internet Connection And Reconnects Immediately?

Feb 13, 2012

My HW is Version B2 and my firmware is 2.25. My internet conection keeps droping and reconecting. I started off doing this a few times a day but now it does not keep a connection for more than 10 minutes.

View 5 Replies View Related

D-Link DIR-655 :: Drops Wireless Connection Very Often / Limited Access?

Jul 9, 2012

Model: DIR-655
HW Version: A3
Firmware: 1.35EA
One problem with DIR-655.

Drops wireless connection very often. On the taskbar in wireless network center (next to speaker and time) I can find info: Limited Access. Router doesnt drop internet connection but only wireless connection. Sometimes 3-4 times an hour. It's very annoying especially when you upload large files (for example 16-20MB) to your mailbox. It drops connection and we get Limited Access and you can try to upload again and again. Anotner example during VOIP conversations for example on skype it drops and disconnects skype.Firmware was never updated just router was bought with this firmware. We are located in China so its correct.When laptops are connected using LAN cable it works fine but its impossible to keep laptops connected using LAN cables all the time.The problem occurs only when we are connected by wireless.QOS is enabled, WISH is enabled.When QOS and WISH disabled it's same also drops connections on WIFI.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved