Scanner Doesn't Show Up At All In Local Network Devices
Nov 12, 2011
Im working for a client at the moment and I've had to setup a network printer for them, I've got 4 Windows 7 machines easily printing over the network to this printer that is connected wirelessly but they want one of there machines to use the scanning functionality of the printer.The scanner doesn't show up at all in the local network devices like the printer does and to be honest i don't really have any experience with scanning over a network to a windows 7 machine, but this printer does support scan to ftp so my idea is to setup a small ftp server on the windows 7 machine with a folder to stored scans on the desktop or something, then put the details of the server in to the printer making it as easy as possible for the customer to scan stuff and just get it from the folder on the desktop, i could also share this folder over the network for anyone to open and get a scan if needs be.
View 2 Replies
ADVERTISEMENT
May 17, 2011
This is the configuration I am running:Internet > Cable Modem > Netgear WNDR3700 Router ~~ DAP-1522 > Wired Windows 7 PC + Linux PC + Printer.The Windows 7 and Linus PC's do communicate well to the internet as do any laptops accessing the router wirelessly and any devices wired to the router. That is the good news.
The bad news is that any devices located after the DAP-1522, including the DAP-1522 do not show up on the network map of either the router or any of the wireless laptops. Neither does the Win 7 PC connected through the DAP-1522 show any networked devices, whether through the DAP-1522 or not, even though network discovery is turned on.
Right now the DAP-1522 is set up to function as a bridge and is in "Static IP" mode. I tried changing it to DHCP, but the DAP-1522 will not allow saving that setting, even though it will allow changing it. It just reverts back to "Static IP". The firmware version is 1.31, and the firmware update went well after a workable logon to the admin page was discovered. Also the one-button (WPS) set-up to the router worked as far as allowing an internet connection.
What needs to change to allow all the devices to show up on the network maps and maintain internet access? Ultimately, I would like to stabilize the IP's of the major components of the network to make troubleshooting easier. But to do that the devices need to show up on the network maps, particularly of the router, so they can be added to the IP reservation table by selection.
View 2 Replies
View Related
Aug 8, 2012
LMS discoverd all my devices and updated the DCR. This devices are visible in DFM. For some of this devices i would like to change the threshold values. For some reason the devices are not visible in Monitor->Fault Settings->Seup->Threshold Settings (please see screenshot) Is there another approach to change the threshold values?
View 5 Replies
View Related
Mar 20, 2011
I'm running Windows XP, SP3. This is a friends computer that I'm trying to fix. It had a virus which I removed, however it left behind a damaged computer. Now there are no network devices that show up in "Network Connections" or in Device Manager. I tried to reinstall the drivers, but I got this error: "The Realtek Ethernet Controller was not found. If Deep Sleep Mode is enabled Please Plug [sic] the Cable".
View 1 Replies
View Related
Sep 1, 2011
I have two computers, one vista (Laptop) the other XP (Desktop). Now the problem is that i can't see my vista laptop on my XP, but both are connected to the same router (Netgear DG2200). The router also has a hard drive connected as a network drive WHICH i can see on the XP.
Problem is, nothing comes up on the Vista laptop except for the router and itself. Not even the network hard drive. I can view it on my PS3, though.
I noticed my lan is not enabled on my laptop, so how do i enable it? I tried diagnosing but it said to connect the lan cable.
View 11 Replies
View Related
Jan 30, 2013
I am running windows 7 HP. We have about 10 devices in one office and 5 devices connected thru a VPN..... When i hooked everything up 4 weeks ago I could see all the devices in the main office and the remote office connected thru the VPN (In the Network Folder that lists everything connected). Now I only see like 4 device and they are all in the main office.
I did some research a couple weeks ago and found a command prompt that "refreshed" all the devices that were connected, but now They are gone again and I cannot remember the command prompt!
View 1 Replies
View Related
Jan 15, 2012
Every once in a while when logging into Windows (7 Ultimate 32 bit) My PC decides it couldn't find a network connection, usually restarting the computer solved the problem, however now I have seemed to permanently be stuck on the "identifying" stage of my LAN connection. My mobo is an Asrock p67 extreme, the network adapter is a realtek pcie family card.Now I know it is not my modem since I can connect on my other PC in the living room, I verified this with a phone call to my ISP, they couldn't see my PC connected to the network but could see the other one.It is not the Ethernet cords, I switched them and even used a new one. I tried rolling back, installing updated and installing factory drivers for my network card, no change.
I tried turning off the PC, disconnected the power cord, discharged it, left everything off/ disconnected for 30 minutes and reattached, powered on, no change.I made sure my DHCP was on and that my PC was set to automatically retrieve IP/DNS.I even bought a new Ethernet card, installed it and I still can't connect, so its not the realtek card.I can't even access my modem using its UP address, 192.168.2.1 (Bell 2wire) but I can on my 2nd PC, it sees all other devices, PS3 /Smartphones but not my PC.
View 19 Replies
View Related
Mar 13, 2013
I have configured a vlan interface on a 3750 switch. there is aprox 4Mb active traffic flowing through the interface, but when I do a "show interface vlan (vlanid)" the output show zero bits in and zero bits out. Its a typical L3 config with one IP on the vllan interface acting as the gateway for the VLAN devices. Is this a normal behaviur ? and if so is there any way to get the traffic in/out stats. The end PC/devices are connected to this switch via an L2 TRUNK and I dont have access to the L2 switch on which the actual devices connect. so cant get the real time stats of those interfaces.
View 2 Replies
View Related
Jan 20, 2011
I put Win7 on a customed pc bought online. The motherboard has an Atheros L1 integrated NIC and I installed a Dlink dge530t NIC into a PCI slot. I know I have to disable the onboard nic but the installed card is not comming up either in Device manager or network connections. What gives? In the bios under integrated peripherals i did enable PnP OS.
View 4 Replies
View Related
May 1, 2013
I recently installed some wireless IP cameras and when attempting to re-install a camera I went into the DHCP Client table to verify which IP a camera was using to set it up, but I could not...and still cannot see any of my cameras in the table even though I can access three of them directly through the IE web browser. I initially power cycled both the E4200 router and Motorola cable modem, and then later just the wireless router...but I still do not see the devices connected. I currently have 2.0.37 firmware even though I was told by Cisco support that there was a later version available, just before being informed that I do not have support available and could purchase it. I attempted to locate a newer version, but the online upgrade portion of the Cisco Connect software searched the net and then states that I have the latest version available. I also opened a Firefox browser to see if maybe my browser was causing issues, but the same limited table appears without all entries available. I even opened the Cisco Connect software on another laptop with the same limited results. Other than a factory reset, get me E4200 dual band wireless router to show all attached devices through the DHCP Client table as it previously did approximately two weeks ago?
View 2 Replies
View Related
Oct 12, 2011
I have had my DIR 615 router for about 6 months, and have had no problems. I have a notebook (Sony Vaio) and I also have a Blue-Ray Player and my DirecTV DVR connected by ethernet. Starting a few days ago I was having connectivity issues. At first I could see the network on my Vaio, but the Internet kept coming and going.I did some troubleshooting on the adapter and that seemed to work. Now I am having an issue where every 2 hours or so the wireless drops and the network disappears from the list of available connections on my notebook. I have had my netbook on (connected wireless) and the issues are replicated on that system.
Both of my wired devices do not see any interruption in connectivity. Living in an apartment complex I suspected interference and indeed there are a ton of other networks in range (as per inSSIDer 2.0). As there is no channel that is clearly open, I have set my router to auto channel scan. I also have tried some of the steps outlined in other threads. The thing I am noticing is that when the network connection drops my network (which has a unique name) doesn't even show up on inSSIDer, it just disappears. When working, my network is consistantly in the -25 range on inSIDDer.I should point out also that my notebook is a mere 8 feet from the router, and there are no obstructions.
View 1 Replies
View Related
Oct 30, 2011
I have a linksys E3200. Today I got disconnected and when it reconnected it stated that the network was changed to just network and not my usual network name. I was having connection issues with the network disconnecting me and reconnecting me. I uninstalled the cisco connect software. I contacted support who told me to restart the router and modem, which I did. After reset I tried to reinstall the software. Cisco Connect likes to insist to do the installation wirelessly but my laptop can't find the router during installation to complete it. My router is essentially a glorified wire connecting my computer to my modem now.
View 2 Replies
View Related
Feb 5, 2011
I'm having big problems with my Linksys WAG320N. I'm pretty clueless when it comes to networking.Without changing any of the settings, the other day my Macbook Pro couldn't connect and it kept saying 'Connection timeout'. From that point my iPhone also refused to connect, although accessing the internet on my MBP via Ethernet was fine.
I did a hard reset following instructions from this forum then re-configured with the installation CD. The wireless LED on the router was lit but my MBP couldn't see the network. Eventually I managed to connect after rebooting my laptop, and enjoyed all of 10 minutes of problem-free of wireless internet connectivity before the network just dropped out and now doesn't show up in my list of networks again, although the wireless LED is still on. Connecting via Ethernet still works, just not via wireless.I've rebooted my laptop and the router and tried switching channels on the router, all to no avail.
View 9 Replies
View Related
May 5, 2013
error: "local area network doesn't have a valid ip configuration"
Problem on another machine:
aCER aSPIRE w/ windows 7 Had internet previously; no changes made to machine EXCEPT swapped hardware internet connection from Links router to a temp set up on a laptop.Couldn't get laptop to connect via hardware - went wireless instead Upon return of cable to ASPIRE, got above error message. Running connection Wizard doesn't do it!
View 7 Replies
View Related
Jul 30, 2012
I am using hp pressario C7000 with window 7 32 bits. Can not access the internet. The reports 'local area network doesn't have a valid ip configuration'.
View 1 Replies
View Related
Feb 7, 2013
I wounder if there is any way to ping the local deviceses connected to a network hosted by a Cisco 1921 router? I wan't to be able to ping the device(computer name) but currently cant do that.
View 1 Replies
View Related
Sep 22, 2011
using virus scanner over the network and this is related to my workplace. a pc with win xp can share all drives (including c:) over the network with another pc with win xp as well. let's say pc1 and pc2 (both with win xp). i can scan pc2 from pc1 once i hv shared all the drives. but for win vista n 7, i found out that it is not possible to share c:...yes, there are some ways to share it but the entire c: cannot be shared. n i also know that c: cannot be shared entirely due to security purposes. but can i bypass this only for virus scanning purpose? i know many will juz ask me to install the anti virus on the infected pc, but if possible i want to scan it over the network. if i hv to scan 20 PCs at the same time i find it easier to do it from a single pc than to install the anti-virus at every single pc.
View 6 Replies
View Related
Sep 15, 2011
I've added several switches and one WLC to my new NCS Prime box. I don't see them in the display. If I try to readd one, it says it already exists. What am I missing?
View 0 Replies
View Related
Jan 12, 2012
how to show a local area connection icon if its disappear, and if its say as a past item in customize notification
View 1 Replies
View Related
Feb 8, 2011
I added the network printer cum scanner - cm1312, going to control panel >> add printer >> etc. etc. Now I can print. But there is no scanner installed. What I can do?
View 5 Replies
View Related
Oct 7, 2011
I have a Canon ScanFront 220 network scanner that seems to have a problem with our network. It's plugged into a Cisco 3560. The network is operational, just chatty.
A wireshark session for just a few seconds looks like this: (192.168.81.42 is the scanner)
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.89 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.90 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.91 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.92 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.93 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.94 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.95 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.96 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.97 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.98 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.99 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.101 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.102 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.103 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.104 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.106 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.108 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.109 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.110 Vlan81
1w4d: IP ARP: rcvd req src 192.168.81.42 0000.8583.2c43, dst 192.168.81.111 Vlan81
I can't find anything on the scanner that would cause this.
View 3 Replies
View Related
Mar 28, 2012
we are observing the no. of conn thru asa 5580 is getting increased and one a fine day it will stop sending/receiving traffics.firewall# show conn count 1900000 in use, 2000008 most used As per the datasheet of this asa, the max conns permissible is 2 million (20 lacs). and the output shows that currently 1900000 connections are there and 2million+8 connections are most used.when i run " show local-host | include host|count/limit ", below are the outputs showing for max connections..
local host: <172.x.x.x>,
TCP flow count/limit = 35857/unlimited
TCP embryonic count to host = 25
UDP flow count/limit = 0/unlimited
local host: <DC01>, TCP flow count/limit = 306/unlimited TCP embryonic count to host = 8 UDP flow count/limit = 736807/unlimited
local host: <DC02>, TCP flow count/limit = 246/unlimited TCP embryonic count to host = 2 UDP flow count/limit = 582010/unlimited
local host: <172.y.y.y>, TCP flow count/limit = 1/unlimited TCP embryonic count to host = 0 UDP flow count/limit = 308412/unlimited
These are the top 4 connections, i wonder should we consider only the tcp flow count or udp as well ?
View 4 Replies
View Related
Jan 27, 2013
Is there anyway I can see the power usage on either a 3550 switch and/or 7301 router? I have some far away I wish to see the usage off.
Devices with module power supplies like cat 4500s/6500s/7600 etc all have commands like "show power ...", which will show me input voltage, current and power usage in watts. Is there anything like this for devices without module power supplies?
View 2 Replies
View Related
May 27, 2012
I have recently changed a couple of our companys office routers over from a netgear vpn router to this, all has gone well with the cisco router providing much better speed and reliablilty... But....
I have one little problem, at one of our offices they have a brother printer that has a scanner built in, since this change over the scanner does not seem to want to work,
as far as i can guess the router is blocking communication to the scanner, printing is working fine. is there anything that I need to enable or add to the settings on the cisco to get this working? I believe that the printer is using some kind of multicast to connect to the PC's
View 1 Replies
View Related
Feb 4, 2011
Wireless connection doesnt show up on Windows Xp, I now if it connected to the internet I could just install updates and it would automatically fix it, but I cant until i get it to connect?
View 1 Replies
View Related
Mar 1, 2012
my laptop isn't showing my wireless internet connection in the list.But my phone is connecting to my wireless internet connection without any problem.I am using a Toshiba Satellite laptop with Windows Vista.
View 3 Replies
View Related
Nov 4, 2011
i have a packard bell network.i formatted the whole laptop.and now my laptop doesnot show any wireless network,however connects to dial up connection.i am using windows 7 ultimate 32 bit os
View 1 Replies
View Related
Apr 27, 2011
I am trying to connect to a different network, but for some reason when I click "Connect To", where it tells me to click to join another wireless network, it just shows me this: and does not show me the Wireless Networks that are available (I am not sure what it is called)
View 6 Replies
View Related
Jan 13, 2013
So, I happened to do CD recovery a day ago; *Due to forgetting Administrator password* and now my laptop seems to not be able to pick up any wireless connections when there usually is a ton. Also every time my laptop restarts it always loads saying "Preparing for first time use" Like I used the CD recovery again. which I didn't. I thought that maybe it has to do with the Drivers and such, though im not very tech fancy, so I wouldn't exactly know where to find the correct driver to install, and which to install.[code] Oh and lastly, I happened to notice on Driver manager, that on "other devices" there is a yellow exclamation point, on both of them: Intel(R) Centrino(R) Wireless-N + WiMAX 6150 and Network Controller.
View 1 Replies
View Related
Dec 15, 2010
I am running a DIR-825 I believe one of the original's no updates or anything. I run it mixed mode. The 2.4 shows up and I can connect to but the 5 ghz (n) speed says it's enabled but I can never see it when I scan on any of my wireless n products (laptops and other computers). Dlink support told me to change to mixed mode g and n. I was running it in mixed mode (a, g and n). D link told me to change to mixed mode g and n and to make sure they stay on channel 6 and 11. Is this correct. Which firmware should I upgrade to and is there any easy way to do this?
View 4 Replies
View Related
Jun 26, 2011
The Cisco 887 doesn't support the show dsl command, what is the command that I need to use to display the speed my ADSL is operating at? On the Cisco 877 the command I use is show dsl int atm 0 but this doesn't work on the 887
View 4 Replies
View Related
Jan 11, 2013
My EA 6500 Linksys router does not show online devices. Current firmware version is 1.1.28.146856.
View 2 Replies
View Related
Mar 25, 2011
With ibm z60m laptop i want to connect wi-fi internet modem but laptop does not show wi-fi connection
View 1 Replies
View Related
