Cisco :: 3550 - Show Power Usage For Devices

Jan 27, 2013

Is there anyway I can see the power usage on either a 3550 switch and/or 7301 router? I have some far away I wish to see the usage off.
 
Devices with module power supplies like cat 4500s/6500s/7600 etc all have commands like "show power ...", which will show me input voltage, current and power usage in watts. Is there anything like this for devices without module power supplies?

View 2 Replies


ADVERTISEMENT

Cisco Switching/Routing :: WS-C3560-48PS-S Show Power Inline But No Power Available

Apr 14, 2013

We have two switches of the same model (WS-C3560-48PS-S) that are not providing PoE. I'm trying to remotely determine what the cause of the issue is.
 
Here is some output.
 
Hostname#show power inlineAvailable:0.0(w)  Used:0.0(w)  Remaining:0.0(w)
Interface Admin  Oper       Power   Device              Class Max                            (Watts)--------- ------ ---------- ------- ------------------- ----- ----Fa0/1     auto   off        0.0     n/a                 n/a   15.4Fa0/2     auto   off        0.0     n/a                 n/a   15.4Fa0/3     auto   off        0.0     n/a                 n/a   15.4Fa0/4     auto   off        0.0     n/a                 n/a   15.4Fa0/5     auto   off        0.0     n/a                 n/a   15.4Fa0/6     auto   off        0.0     n/a                 n/a   15.4Fa0/7     auto   off        0.0     n/a                 n/a   15.4Fa0/8     auto   off        0.0     n/a                 n/a   15.4Fa0/9     auto   off        0.0     n/a                 n/a   15.4Fa0/10    auto   off        0.0     n/a                 n/a   15.4(code)

View 1 Replies View Related

Cisco Firewall :: ASA 5550 8.4.3 Show CPU Usage - Error?

Oct 24, 2012

One of our firewalls  - Cisco ASA 5550 8.4.3  - has got a problem. Our monitoring system requests the cpu usage on the box and from time to time we got an error. It was now possible to catch the error message - the output of show cpu usage looks like on the attached picture.We did not found something in the know bugs neither in the "Resolved Caveats in ASA Version 8.4(4.1) ".

View 1 Replies View Related

Linksys Wireless Router :: E4200 Can See None Of Devices Attached To Power-line Devices

Aug 15, 2011

I have installed my new E4200 and it works beautifully.  I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses.  If I plug a laptop directly into the Cisco, I can of course see it.However,  I can see none of the devices attatched to the powerline devices?  I have a securty cam connected via the powerline and want to know the IP address.  I checked with cisco technical support via chat and they said it is impossible.  I have used 2 previous routers with the same configuration and can see all devices.

View 1 Replies View Related

Cisco Firewall :: 3.2(10) / Inconsistent Show Resource Usage Output

Feb 15, 2012

I've multiple FWSMs running. The funny thing: When I do a "show resource usage" I have one blade showing a "Conns [rate]" and "Syslogs [rate]" values and one blade isn't.

SSH                         4           5         15             0 admin
Syslogs [rate]             1         437 unlimited             0 admin
Conns                     149       23465 unlimited             0 admin
Xlates                   154         2877 unlimited             0 admin
Hosts                     154         2877 unlimited             0 admin
Mac-addresses               6           7     65535             0 admin

All modules are running the same software version 3.2(10).And the even more funny thing is: on one blade I have different output for all the contexts on it.What's the reason for that behaviour? A bug?

View 2 Replies View Related

Cisco :: Switch Power Usage On Boot?

Oct 11, 2011

I have a customer who is concerned with the power draw on the new switches we're deploying.They only have 20 amp breakers in their closets and fear popping them on switch boot. The customer is under the impression that a switch will pull full power on boot. So a 3560X with an 1100w PSU will draw the full 1100w on startup. Ive never heard this and it doest make much sense to me, but I need to verify.

View 10 Replies View Related

Cisco :: 2800 Power Usage And Heat Output?

Jul 12, 2011

Only because we want to updeate A/C system in server room, we need to know what Cisco 2800's the power usage and heat output are. It is on the racks and can't see its spesc.

View 1 Replies View Related

Cisco Wireless :: Power Draw / Usage For AIR-CT5508-K9?

Apr 17, 2012

What is the operating and/or peak power consumption (in kW) of a 5508 WLC with redundant power supplies?
 
The below power details are from the 5508 datasheet which lists 115 W as the maximum draw (0.115 kW) however this seems a bit low, is this right?
  
Input power: 100 to 240 VAC; 50/60 Hz; 1.05 A at 110 VAC, 115 W Maximum; 0.523 A at 220 VAC, 115 W Maximum; Test Conditions: Redundant Power Supplies, 40C, Full Traffic. Heat Dissipation: 392 BTU/hour at 110/220 VAC Maximum  Cisco 5500 Series Wireless Controllers Data Sheet: [URL]

View 1 Replies View Related

Cisco Switching/Routing :: C6509e Power Usage?

Mar 25, 2013

We are buying some C6509Es with Sup2Ts and 8 port 10G cards.  Would like to get a close estimate of the power consumption for our configured chassis. Does C6509E have at least the following components that can share their show power output.
 
Catalyst 6500 Enhanced 9-slot chassis 14RU no PS no Fan Tray1Catalyst 6509-E Chassis Fan Tray1Catalyst 6500 24-port GigE Mod: fabric-enabled with DFC41C6K 8 port 10 Gigabit Ethernet module with DFC4 (Trustsec)1Catalyst 6500 Dist Fwd Card DFC416908 10G baseboard1Cat6500 6000W AC Power Supply2Cat 6500 Sup 2T with 2 x 10GbE and 3 x 1GbE with MSFC5 PFC42Internal 1G Compact Flash2Cat 6k 80G Sys Daughter Board Sup2T PFC42Catalyst 6500 Supervisor Engine 2T Baseboard2Catalyst 6500 2GB memory for Sup2T and Sup2TXL2 

View 2 Replies View Related

Dual Xeon X5-26xx Power Usage

Mar 10, 2012

My two E3 boxes with 16GB each is feeling kinda cramped for what I want to do, 8GB unregistered ECC is still stupidly expensive, and a dual E5-2620 box with 12 cores/24 threads and 64GB of the much cheaper registered ECC, something like a 560Ti or equiv for playing around with remotefx, and a X540-AT2 or two when they become more widely available really sounds like a lot of fun.

Anyway the only concern I have is adding even more power to the ever growing power bill and heat load what with summer coming. My current setup uses around 320W, what the above system might draw at mostly idle and full load.

View 2 Replies View Related

Cisco Infrastructure :: 3550 - Limiting Power Allocation To 15.4 W On Pre-POE Switch?

Jan 2, 2013

I'm using a Catlyst 3550 to supply power to a IP network surveliance camera.  By default, the predecesor to POE, Cisco Inline Power allocates 15.4 W of power to a port ... What is the process for reducing this power output?
 
"For an IEEE device, the switch always allocates 15.4 W to the port. The switch does not display the IEEE class type in the show power inline privileged EXEC command output. Instead, it displays n/a."

View 2 Replies View Related

Cisco Switching/Routing :: 3550 EMI Switch Is Not Responding To Power Connection

May 10, 2012

My cisco 3550 EMI switch is not responding to power connection. I have checked and changed power cable. its still not working.fan is not running and no lights on front panel

View 3 Replies View Related

Cisco :: Devices Don't Show In NCS 1.0

Sep 15, 2011

I've added several switches and one WLC to my new NCS Prime box. I don't see them in the display. If I try to readd one, it says it already exists. What am I missing?

View 0 Replies View Related

Cisco :: Line Usage In Case Of Show Line On 2500 Series?

Oct 10, 2012

Cisco 2500 series access servers show line usage with the "show line" command:

View 2 Replies View Related

Windows XP - No Network Devices Show Up

Mar 20, 2011

I'm running Windows XP, SP3. This is a friends computer that I'm trying to fix. It had a virus which I removed, however it left behind a damaged computer. Now there are no network devices that show up in "Network Connections" or in Device Manager. I tried to reinstall the drivers, but I got this error: "The Realtek Ethernet Controller was not found. If Deep Sleep Mode is enabled Please Plug [sic] the Cable".

View 1 Replies View Related

Linksys Wireless Router :: EA6500 - Identifying Devices Causing High Usage?

Mar 28, 2013

I'm thinking of purchasing a Cisco Linksys EA6500. I need a router that can one monitor bandwidth used by device. Keep exceeding our ISP's network bandwidth allocation, need to identify the devices that are causing this high usage and be able to do so from the router. Does the EA6500's standard software support this, is their router software one can obtain for the unit that does this or is there another home router option that can perform this function?

View 6 Replies View Related

Dell :: Vostro 3550 - Reinstalled Windows And Now Devices Not Found Including Internet Connection

Jun 11, 2011

On receiving my new dell vostro 3550, I reinstalled the windows 7 cd that came with the computer.

Before I did, I had internet connection, now I don't. 

It says it finds no device. All i did was install windows. What else do I need to do for it to recognise the devices are on the system?

View 3 Replies View Related

Cisco :: LMS 4.2.1 Fault Setup Doesn't Show Any Devices

Aug 8, 2012

LMS discoverd all my devices and updated the DCR. This devices are visible in DFM. For some of this devices i would like to change the threshold values. For some reason the devices are not visible in Monitor->Fault Settings->Seup->Threshold Settings (please see screenshot) Is there another approach to change the threshold values?

View 5 Replies View Related

Cisco Switching/Routing :: How To Show C4900M SFP Optical Power Level

Jul 4, 2012

I have an C4900M with twingig converter and SFP GLC-LX-SMD in. So the SFP supports DOM function. It is running on 12.2(53)SG2.
 
I would to the see the optical power level of the SFP, but it does not recognize 'show interface transceiver' command as showed in 4500 software guide.

View 5 Replies View Related

Netgear DG2200 Devices Won't Show Up On Network

Sep 1, 2011

I have two computers, one vista (Laptop) the other XP (Desktop). Now the problem is that i can't see my vista laptop on my XP, but both are connected to the same router (Netgear DG2200). The router also has a hard drive connected as a network drive WHICH i can see on the XP.

Problem is, nothing comes up on the Vista laptop except for the router and itself. Not even the network hard drive. I can view it on my PS3, though.

I noticed my lan is not enabled on my laptop, so how do i enable it? I tried diagnosing but it said to connect the lan cable.

View 11 Replies View Related

Command Prompt To Show Devices On Network?

Jan 30, 2013

I am running windows 7 HP. We have about 10 devices in one office and 5 devices connected thru a VPN..... When i hooked everything up 4 weeks ago I could see all the devices in the main office and the remote office connected thru the VPN (In the Network Folder that lists everything connected). Now I only see like 4 device and they are all in the main office.

I did some research a couple weeks ago and found a command prompt that "refreshed" all the devices that were connected, but now They are gone again and I cannot remember the command prompt!

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND Generating High Data Usage With No Devices Connected

May 3, 2013

Region : UnitedKingdom
Model : TD-W8951ND
Hardware Version : V5
Firmware Version : 22.05.2012
ISP :

I have a TD-W8951ND v5 on the latest firmware.

I recently broke my broadband data cap which surprised me as I had not been using the internet much.

I only have tablet which I switched off having first checked the router to make sure there were no other wireless connections and adding MAC address filtering to be sure no one else was stealing my bandwidth. With just my router connected to the ISP, my ISP has recorded 170MB of downloaded data in 3.5 hours. Switching off the router stops the traffic being recorded (as you would expect), but when switched back on the large data transfers start up again.

I have plugged in an older router (not wireless) and no traffic is generated, so it seems to be the TP-Link router rather than my ISP or ADSL circuit that is at fault.

View 1 Replies View Related

Scanner Doesn't Show Up At All In Local Network Devices

Nov 12, 2011

Im working for a client at the moment and I've had to setup a network printer for them, I've got 4 Windows 7 machines easily printing over the network to this printer that is connected wirelessly but they want one of there machines to use the scanning functionality of the printer.The scanner doesn't show up at all in the local network devices like the printer does and to be honest i don't really have any experience with scanning over a network to a windows 7 machine, but this printer does support scan to ftp so my idea is to setup a small ftp server on the windows 7 machine with a folder to stored scans on the desktop or something, then put the details of the server in to the printer making it as easy as possible for the customer to scan stuff and just get it from the folder on the desktop, i could also share this folder over the network for anyone to open and get a scan if needs be.

View 2 Replies View Related

D-Link DAP-1522 :: Devices Local Do Not Show On Network Map

May 17, 2011

This is the configuration I am running:Internet > Cable Modem > Netgear WNDR3700 Router ~~ DAP-1522 > Wired Windows 7 PC + Linux PC + Printer.The Windows 7 and Linus PC's do communicate well to the internet as do any laptops accessing the router wirelessly and any devices wired to the router. That is the good news.

The bad news is that any devices located after the DAP-1522, including the DAP-1522 do not show up on the network map of either the router or any of the wireless laptops. Neither does the Win 7 PC connected through the DAP-1522 show any networked devices, whether through the DAP-1522 or not, even though network discovery is turned on.

Right now the DAP-1522 is set up to function as a bridge and is in "Static IP" mode. I tried changing it to DHCP, but the DAP-1522 will not allow saving that setting, even though it will allow changing it. It just reverts back to "Static IP". The firmware version is 1.31, and the firmware update went well after a workable logon to the admin page was discovered. Also the one-button (WPS) set-up to the router worked as far as allowing an internet connection.

What needs to change to allow all the devices to show up on the network maps and maintain internet access? Ultimately, I would like to stabilize the IP's of the major components of the network to make troubleshooting easier. But to do that the devices need to show up on the network maps, particularly of the router, so they can be added to the IP reservation table by selection.

View 2 Replies View Related

Cisco Switching/Routing :: 2960S - Internal Power Supply Show Unavailing When Running Off RPS?

Feb 13, 2012

I have a 2960S connected to an RSP 2300.  The 2960S is currently running off of the RPS, and I would like to switch it back to the internal power supply.  Can I just run "power supply 1 on"?  Will this cause the switch to reboot?  Also I am concerned because when I do a show env power it shows: [code]
 
 Is it normal for the internal power supply to show Unavail when running off RPS?

View 1 Replies View Related

Linksys Wireless Router :: EA 6500 Cannot Show Online Devices?

Jan 11, 2013

My EA 6500 Linksys router does not show online devices. Current firmware version is 1.1.28.146856.

View 2 Replies View Related

Linksys Wireless Router :: E4200 - No Led To Show Connected Devices Status

Oct 31, 2011

I'm thinking of upgrading from my Linksys WRT54G router to the E4200 and though I've goggled. Also, are there no LEDs on this unit to tell you the status of what's connected?

E3000WRT-54GWVC-80N

View 3 Replies View Related

Cisco Switches :: SD208P - Does Not Seem To Power PoE Devices

May 3, 2012

I have a Cisco SD208P. Is this a PSE of type A or B (endspan or midspan)? The switch does not seem to power PoE devices via the data pairs only.

View 2 Replies View Related

Linksys Wireless Router :: E1200 Power Cycle Reset To Connect To Devices

Jan 19, 2013

I have an E1200 and if a device - such as my tablet or laptop - is left unused for a period of time - say for 4 or 5 hours - they won't reconnect to the router unless I do a power cycle/reset on the router.

View 5 Replies View Related

When Check Internet Usage Log On Wireless Company The Usage Is Totally Off?

Apr 3, 2013

however recently when i check my internet usage log on my wireless company (Rogers) the usage is totally off from what my bandwidth tracker shows me. So i decide to turn off my wifi and see what happens, there has always been this weird wifi connection appearing whenever my wifi appears, then afterwards when i turn off my wifi the suspicious wifi connections disappear. is this possible that someone is using our wifi? i might just be overreacting but it has brought me to concern that if the usage continues my family will have to end up paying over $30 for extra internet use. it is very frustrating me because when i check my DHCP client table it only shows 3 connection, ethernet - my desktop which is not turned on, 2 wireless connection - my laptop and my sister's laptop.

View 6 Replies View Related

Linksys Wireless Router :: Why Doesn't E4200 Wireless Router Show All Attached Devices

May 1, 2013

I recently installed some wireless IP cameras and when attempting to re-install a camera I went into the DHCP Client table to verify which IP a camera was using to set it up, but I could not...and still cannot see any of my cameras in the table even though I can access three of them directly through the IE web browser. I initially power cycled both the E4200 router and Motorola cable modem, and then later just the wireless router...but I still do not see the devices connected. I currently have 2.0.37 firmware even though I was told by Cisco support that there was a later version available, just before being informed that I do not have support available and could purchase it. I attempted to locate a newer version, but the online upgrade portion of the Cisco Connect software searched the net and then states that I have the latest version available. I also opened a Firefox browser to see if maybe my browser was causing issues, but the same limited table appears without all entries available. I even opened the Cisco Connect software on another laptop with the same limited results. Other than a factory reset, get me E4200 dual band wireless router to show all attached devices through the DHCP Client table as it previously did approximately two weeks ago?

View 2 Replies View Related

Cisco Switching/Routing :: 3750 - Show Interface Vlan (ID) Doesn't Show In / Out Traffic Rate

Mar 13, 2013

I have configured a vlan interface on a 3750 switch. there is aprox 4Mb active traffic flowing through the interface, but when I do a "show interface vlan (vlanid)" the output show zero bits in and zero bits out. Its a typical L3 config with one IP on the vllan interface acting as the gateway for the VLAN devices. Is this a normal behaviur ? and if so is there any way to get the traffic in/out stats. The end PC/devices are connected to this switch via an L2 TRUNK and I dont have access to the L2 switch on which the actual devices connect. so cant get the real time stats of those interfaces.

View 2 Replies View Related

Cisco :: Understand Show Sessions And Show Connection Commands?

Jan 29, 2012

How to understand "show sessions" and "show connection" commands? And what is the difference between the two?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved