LMS discoverd all my devices and updated the DCR. This devices are visible in DFM. For some of this devices i would like to change the threshold values. For some reason the devices are not visible in Monitor->Fault Settings->Seup->Threshold Settings (please see screenshot) Is there another approach to change the threshold values?
View 5 RepliesI would like to know if there's a way to show Current-Utilization percentage within the messages generated by the Fault Management Module in LMS 4.0 [code] As you can see above CurrentUtilization percentage is not shown in Event Description section.
View 2 Replies View RelatedIm working for a client at the moment and I've had to setup a network printer for them, I've got 4 Windows 7 machines easily printing over the network to this printer that is connected wirelessly but they want one of there machines to use the scanning functionality of the printer.The scanner doesn't show up at all in the local network devices like the printer does and to be honest i don't really have any experience with scanning over a network to a windows 7 machine, but this printer does support scan to ftp so my idea is to setup a small ftp server on the windows 7 machine with a folder to stored scans on the desktop or something, then put the details of the server in to the printer making it as easy as possible for the customer to scan stuff and just get it from the folder on the desktop, i could also share this folder over the network for anyone to open and get a scan if needs be.
View 2 Replies View RelatedI'm setting up a new SF-300-08 with SNMP.I have defined Groups OK.But, when I go to Add User, the Group pulldown is grayed out and I can't add a user.
View 1 Replies View RelatedDespite there are all devices are managed in DFM (accorduing to Collection Summary Portlet or Rediscover devices) there are no devices in the Fault Monitor with the message "No devices are available"Does it mean, we have absolutly no faults in our network or does it mean that we have a problem with DFM?
View 2 Replies View RelatedI am working with LMS 4.1 and FDM 4.1.0.
If I ask to the Supported Device Finder Portlet about C4503-E (SysObjectId: 1.3.6.1.4.1.9.1.874), it tells that this device is supported by DFM 4.1.0. Nevertheless, in DFM module each one devices appear in the "All Unknown Devices" group, with Error Code: Unsupported. CDP is enable in each one of these devices.
I have configured a vlan interface on a 3750 switch. there is aprox 4Mb active traffic flowing through the interface, but when I do a "show interface vlan (vlanid)" the output show zero bits in and zero bits out. Its a typical L3 config with one IP on the vllan interface acting as the gateway for the VLAN devices. Is this a normal behaviur ? and if so is there any way to get the traffic in/out stats. The end PC/devices are connected to this switch via an L2 TRUNK and I dont have access to the L2 switch on which the actual devices connect. so cant get the real time stats of those interfaces.
View 2 Replies View RelatedI recently installed some wireless IP cameras and when attempting to re-install a camera I went into the DHCP Client table to verify which IP a camera was using to set it up, but I could not...and still cannot see any of my cameras in the table even though I can access three of them directly through the IE web browser. I initially power cycled both the E4200 router and Motorola cable modem, and then later just the wireless router...but I still do not see the devices connected. I currently have 2.0.37 firmware even though I was told by Cisco support that there was a later version available, just before being informed that I do not have support available and could purchase it. I attempted to locate a newer version, but the online upgrade portion of the Cisco Connect software searched the net and then states that I have the latest version available. I also opened a Firefox browser to see if maybe my browser was causing issues, but the same limited table appears without all entries available. I even opened the Cisco Connect software on another laptop with the same limited results. Other than a factory reset, get me E4200 dual band wireless router to show all attached devices through the DHCP Client table as it previously did approximately two weeks ago?
View 2 Replies View RelatedI've added several switches and one WLC to my new NCS Prime box. I don't see them in the display. If I try to readd one, it says it already exists. What am I missing?
View 0 Replies View RelatedI'm running Windows XP, SP3. This is a friends computer that I'm trying to fix. It had a virus which I removed, however it left behind a damaged computer. Now there are no network devices that show up in "Network Connections" or in Device Manager. I tried to reinstall the drivers, but I got this error: "The Realtek Ethernet Controller was not found. If Deep Sleep Mode is enabled Please Plug [sic] the Cable".
View 1 Replies View RelatedIs there anyway I can see the power usage on either a 3550 switch and/or 7301 router? I have some far away I wish to see the usage off.
Devices with module power supplies like cat 4500s/6500s/7600 etc all have commands like "show power ...", which will show me input voltage, current and power usage in watts. Is there anything like this for devices without module power supplies?
I have two computers, one vista (Laptop) the other XP (Desktop). Now the problem is that i can't see my vista laptop on my XP, but both are connected to the same router (Netgear DG2200). The router also has a hard drive connected as a network drive WHICH i can see on the XP.
Problem is, nothing comes up on the Vista laptop except for the router and itself. Not even the network hard drive. I can view it on my PS3, though.
I noticed my lan is not enabled on my laptop, so how do i enable it? I tried diagnosing but it said to connect the lan cable.
I am running windows 7 HP. We have about 10 devices in one office and 5 devices connected thru a VPN..... When i hooked everything up 4 weeks ago I could see all the devices in the main office and the remote office connected thru the VPN (In the Network Folder that lists everything connected). Now I only see like 4 device and they are all in the main office.
I did some research a couple weeks ago and found a command prompt that "refreshed" all the devices that were connected, but now They are gone again and I cannot remember the command prompt!
The Cisco 887 doesn't support the show dsl command, what is the command that I need to use to display the speed my ADSL is operating at? On the Cisco 877 the command I use is show dsl int atm 0 but this doesn't work on the 887
View 4 Replies View RelatedThis is the configuration I am running:Internet > Cable Modem > Netgear WNDR3700 Router ~~ DAP-1522 > Wired Windows 7 PC + Linux PC + Printer.The Windows 7 and Linus PC's do communicate well to the internet as do any laptops accessing the router wirelessly and any devices wired to the router. That is the good news.
The bad news is that any devices located after the DAP-1522, including the DAP-1522 do not show up on the network map of either the router or any of the wireless laptops. Neither does the Win 7 PC connected through the DAP-1522 show any networked devices, whether through the DAP-1522 or not, even though network discovery is turned on.
Right now the DAP-1522 is set up to function as a bridge and is in "Static IP" mode. I tried changing it to DHCP, but the DAP-1522 will not allow saving that setting, even though it will allow changing it. It just reverts back to "Static IP". The firmware version is 1.31, and the firmware update went well after a workable logon to the admin page was discovered. Also the one-button (WPS) set-up to the router worked as far as allowing an internet connection.
What needs to change to allow all the devices to show up on the network maps and maintain internet access? Ultimately, I would like to stabilize the IP's of the major components of the network to make troubleshooting easier. But to do that the devices need to show up on the network maps, particularly of the router, so they can be added to the IP reservation table by selection.
I Have installed LMS 4.0.1 for my client. I have also installed UTLite script on the domain controller as per instruction from cisco. When i look at the utlite.log i'm seeing message displayed below:
Failed to create Tables. Transaction Rolled back
Failed to create Tables. Transaction Rolled back
: com.sybase.jdbc2.jdbc.SybSQLException: SQL Anywhere Error -110: Item 'getAuthenticatedUsers_ACS' already exists
Intializing the Controler 9 = skt Pkg = com.cisco.nm.cm.ut.ctrlplane.ctrls.SocketCtrl
2011/08/25 14:59:14 main utlite INFO SocketListener: Socket Listener : Port : 16236
Started Socket Listener
[code]....
Wireless connection doesnt show up on Windows Xp, I now if it connected to the internet I could just install updates and it would automatically fix it, but I cant until i get it to connect?
View 1 Replies View Relatedmy laptop isn't showing my wireless internet connection in the list.But my phone is connecting to my wireless internet connection without any problem.I am using a Toshiba Satellite laptop with Windows Vista.
Every once in a while when logging into Windows (7 Ultimate 32 bit) My PC decides it couldn't find a network connection, usually restarting the computer solved the problem, however now I have seemed to permanently be stuck on the "identifying" stage of my LAN connection. My mobo is an Asrock p67 extreme, the network adapter is a realtek pcie family card.Now I know it is not my modem since I can connect on my other PC in the living room, I verified this with a phone call to my ISP, they couldn't see my PC connected to the network but could see the other one.It is not the Ethernet cords, I switched them and even used a new one. I tried rolling back, installing updated and installing factory drivers for my network card, no change.
I tried turning off the PC, disconnected the power cord, discharged it, left everything off/ disconnected for 30 minutes and reattached, powered on, no change.I made sure my DHCP was on and that my PC was set to automatically retrieve IP/DNS.I even bought a new Ethernet card, installed it and I still can't connect, so its not the realtek card.I can't even access my modem using its UP address, 192.168.2.1 (Bell 2wire) but I can on my 2nd PC, it sees all other devices, PS3 /Smartphones but not my PC.
i have a packard bell network.i formatted the whole laptop.and now my laptop doesnot show any wireless network,however connects to dial up connection.i am using windows 7 ultimate 32 bit os
View 1 Replies View RelatedI am trying to connect to a different network, but for some reason when I click "Connect To", where it tells me to click to join another wireless network, it just shows me this: and does not show me the Wireless Networks that are available (I am not sure what it is called)
View 6 Replies View RelatedSo, I happened to do CD recovery a day ago; *Due to forgetting Administrator password* and now my laptop seems to not be able to pick up any wireless connections when there usually is a ton. Also every time my laptop restarts it always loads saying "Preparing for first time use" Like I used the CD recovery again. which I didn't. I thought that maybe it has to do with the Drivers and such, though im not very tech fancy, so I wouldn't exactly know where to find the correct driver to install, and which to install.[code] Oh and lastly, I happened to notice on Driver manager, that on "other devices" there is a yellow exclamation point, on both of them: Intel(R) Centrino(R) Wireless-N + WiMAX 6150 and Network Controller.
View 1 Replies View RelatedI am running a DIR-825 I believe one of the original's no updates or anything. I run it mixed mode. The 2.4 shows up and I can connect to but the 5 ghz (n) speed says it's enabled but I can never see it when I scan on any of my wireless n products (laptops and other computers). Dlink support told me to change to mixed mode g and n. I was running it in mixed mode (a, g and n). D link told me to change to mixed mode g and n and to make sure they stay on channel 6 and 11. Is this correct. Which firmware should I upgrade to and is there any easy way to do this?
View 4 Replies View RelatedMy EA 6500 Linksys router does not show online devices. Current firmware version is 1.1.28.146856.
View 2 Replies View RelatedI have an ASA 5585 in transparent mode, multi-context. It seems that the option to configure a BVI in one of the traffic contexts isn't there. In other words, while I see the option to configure a bridge group interface in the admin context, no such option comes up in the traffic context.
[CODE]....
I'm using a wlan controller with 1242ag converted to lwapp, i'm trying to enable 5.8 but when i change the from local to bridge the lwapp disappear from controller. May be that the firmware does not support mesh !I'm following the 4402 wlan manual at page 641.
View 5 Replies View RelatedWith ibm z60m laptop i want to connect wi-fi internet modem but laptop does not show wi-fi connection
View 1 Replies View RelatedI put Win7 on a customed pc bought online. The motherboard has an Atheros L1 integrated NIC and I installed a Dlink dge530t NIC into a PCI slot. I know I have to disable the onboard nic but the installed card is not comming up either in Device manager or network connections. What gives? In the bios under integrated peripherals i did enable PnP OS.
View 4 Replies View RelatedI'm trying to connect an HP Laserjet 4050n to my wireless network but it isn't finding it? I've tried disabling firewalls etc and still no luck.
View 1 Replies View RelatedI've enabled RDP on a laptop, but I can't connect to it. Pinging the laptop works. nmap shows ports open, but not RDP. netstat on the laptop shows nothing listening on 3389. I've also tried rebooting. [code]
View 1 Replies View RelatedI'm thinking of upgrading from my Linksys WRT54G router to the E4200 and though I've goggled. Also, are there no LEDs on this unit to tell you the status of what's connected?
E3000WRT-54GWVC-80N
How to approach an overnight upgrade from autonomous AP1231/1242 deployment into a 2504 controller-based AP1602 deployment.I do not have access to the existing 1231/1242 deployment ==> I need to ask network manager for all necessary config info to be ported onto the 2504.Example: the 1231 show run output does not list the various SSID that are in use.Therefore the question is: which commands' output do I need to ask to have all possible config data from 1231/1242 to use when configuring the 2504/1602 deployment.
View 2 Replies View RelatedI am working with 3750 switch.I console the switch and turn it on and it doesn’t show text in hyper terminal with any BAUD (I tried all the speeds). The hyper terminal works with other switches so the problem is not with the hyper terminal.when I tried to break the password it stuck after I was writing "flash_init" and when I entered or typed text it show only garbage characters. I tried to break the password with all the speeds and it shows garbage output. I tried to turn on the switch and hold control + break and it showed the text only with the speed 115200, but after I left holding and tried to type it showed only garbage again. Also I tried to copy text from the notepad to the hyper terminal.
View 6 Replies View Related