D-Link DIR-825 :: Sticking With Share Port Utility?
Jan 8, 2010
Seems pretty obvious to me that D-link is using linux in rev B1 hardware. Its not big secret thou if i have read right from url...why D-link is sticking with this shareport-utility. Even the B1 hardware has common usb-port for sure, which can be controlled by linux and therefore there would be more simple way to get things like printer working with it over network. Also ssh-server support would not be too big investment. right? And why im not so fully changing to openwrt or dd-wrt is that the patches are not in stable tree yet and i think that i can be pretty happy with the current web-ui of dlink and dont have much of time to setup my router for openwrt.
View 4 Replies
ADVERTISEMENT
Apr 30, 2013
I have noticed that the Share port software is available for Windows 7 which I do use on my Windows 7 computer.
If I get a Windows 8 computer, does the same software also work on Windows 8 ? ? ?
View 1 Replies
View Related
Aug 27, 2011
I am using DIR-825 with share port Version 1.17 under Win 7 with Out post Pro Firewall V 7.1. Although I give {URL}, all rights to access the LAN and WAN it is not possible to get a connection to the router. Only shutting down the firewall entirely works to get access. (This cannot be the solution ). Is there any other file or service for which the firewall needs to be configured? I tried to open different ports for TCP and UDP as well - without any success.
View 1 Replies
View Related
Feb 20, 2012
says everything is good but when I go to print...laptop can't find printer?
View 1 Replies
View Related
Nov 20, 2011
I was handed two SGE2000 24-port 10/100/1000 switches. The default IP address does not work on either of them. Short of doing a hardware reset, is there an IP discovery utility that I can run.how I can find the IP?
View 5 Replies
View Related
Apr 23, 2013
I have a client with a 3750x stack. We've upgraded it to IP Services. We have a simple PBR setup. One access-list to forward traffic from a specific LAN ip to another gateway on the network.
I go to vlan1 (default vlan) to apply the PBR and the command takes with no errors, but do a "show run" and it doesn't show up under the interface.
I go to vlan1 and apply a PBR that doesn't exist and the command takes with no errors, and is listed under the interface in the config
I can apply the PBR globally and appears to work, but we can't have it there based on other issues it creates.
config: (all tracks are up)
C3750_stack#show sdm prefer
The current template is "desktop routing" template.
[Code]....
View 8 Replies
View Related
Dec 1, 2011
Setting up a home network for someone who does not know any of the settings for the router, "someone" set it up for her. A laptop running Vista was accessing the network, a cable modem is used.I added a Windows-7 desktop, no problem. Connected an HP printer to desktop, no problem. Tried to connect HP printer which has a wireless function to wireless network, no-go, cannot find the security key to configure the printer.Tried to access the router with 192.168.0.1, admin screen shows, user does not know anything about password, tried default username, Admin with blank password, no-go.Reset router,
View 5 Replies
View Related
Sep 17, 2012
Is it possible to share a USB printer via the DIR-825 without having to install a utility? Or, do you need to install the SharePort software on each computer to share a printer?
View 1 Replies
View Related
Feb 25, 2012
I can see what MAC addresses have a wireless session and I've used MAC Filtering to stop some MAC addresses from using the network at certain times, but they are still getting through to the internet. I don't know if they were to clone their MAC address as to whether this would show up with the cloned address in active sessions list. How I can stop some users from getting through at certain times? Any utility I can use on my Mac (Mac OS X 10.6. to show which computers/MAC addresses are on the network?
View 5 Replies
View Related
Jul 10, 2011
I tried to upgrade to 2.05NA several times and there always ends up being an issue that support is too sad to give the correct answer to and just puts a consumer thru "jumping thru hoops" and getting nowhere.2.05NA (actually started with 2.03NA) first caused a problem with limiting my upload speed to 1024mb. I happened across the fix on another forum and tried it and it worked. It was the default QoS setting D-Link changed after version 2.02NA and refuses to release a new firmware to fix this for everyone. Why they don't release a new FW that fixes the issue but keeps things promised on the package working is beyond me. Now, I purchased a D-Link DNS-323 and I finally got drives to fill it some time back. If 2.05NA is loaded, the Easy Search Utility will not connect to the NAS. I have tried the version the NAS came with AND the latest version offered. It will see the NAS upon 1st launch of the latest Easy Search Utility, but it will not connect and then it disappears if you relaunch the utility and won't return until a reboot. Bottom Line: it will not connect with 2.05NA loaded. It works fine with 2.02NA.
What is the setting that D-Link has screwed over here also that is causing this problem? It is pretty sad that their own hardware items won't play well together unless you run old FW. What setting D-Link changed that is making the D-Link DIR-825 not connect to the D-Link DNS-323 NAS when the DIR-825 has 2.05NA loaded. I have a DIR-825 Rev. B1 and a DNS-323 NAS with its latest firmware. I am using 2.02NA on the router since that is the only one that works and is the latest stable release(other than the DHCP reserve issue), no matter what D-Link wants to try to make people think. I won't try their support since they NEVER did give me the fix for the QoS upload issue and when I asked them to put it as a sticky in this forum when I found the answer somewhere else....well, there is no sticky as we all know. I would like to be able to have the DHCP Reserve issue working too, but I would like to connect to my NAS more at this point.
View 6 Replies
View Related
May 4, 2013
Region : UnitedStates
Model : TL-WR702N
Hardware Version : V1
Firmware Version :
ISP :
Just got my new TP-Link device and intend to use it in client mode for my new audio receiver to connect to my home network.Trying to configure the device, and I cannot even access the online utility. I tried using the following address:
192.168.0.254
192.168.1.1
None of these seem to work. Tried on Chrome, then Internet Explorer and made sure that the web browser was not set to proxy (it was not set to this in the first place). The address just doesn't seem to connect, and I get a "This page cannot be displayed" note, as if I'm reaching a bad address.
View 1 Replies
View Related
Dec 21, 2012
Region : Others
Model : TL-WR740N
Hardware Version : Not Clear
I seted up router and i coud acces the utility window, then i switced from w7x32 to w7x64 and then i try to acces the utility window i can only see.Username or Password is incorrect.Is the "Caps Lock" enabled on your keyboard? The username and password must be lowercase, please ensure that the "Caps Lock" LED is disabled on your keyboard and try again.Forgot your username or password? Please reset the device to the factory default settings if you have forgotten your username or password. The default username and password are both set as "admin". The settings will be restored to factory default after the resetting.
How to restore the device to the factory default settings?Firstly locate the reset button on the rear panel of the unit, whilst the device is powered on press and hold the reset button for more than 5 seconds, the device will then reboot and restore itself to the factory default settings.no pop up window appears i tried looking this up and the closest thing i found was to un-check the proxy but its not checked so what should i do to be able to access utility window?
View 3 Replies
View Related
Jan 5, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
ISP : TalkTalk
I'm getting to the last barrier to my Router USB printer working..The UPS is seeing my printer now but the last hurdle is the Printer Setup program. It is not comatible with Windows 8 apparently. The one I downloaded of the support site doesn't run either. Any news off one coming out for Win 8?
View 2 Replies
View Related
Feb 13, 2013
Region : Poland
Model : TD-W8968
Hardware Version : V1
Firmware Version : TD-W8968_V1_120926
ISP :
Recently I've switched to Windows 8 Pro 32bit (from Win XP) and since that moment I have problems with USB Printer Controller Utility. I was able to print test page successfully but printing larger documents (for example PDF file, about 15MB of data needs to be transferred to the printer) results in blue screen of death. Additionally if USB Printer Controller Utility is started "automatically wit Windows" switching user results in BSOD about 30 seconds after the second instance of Printer Controlled is loaded. Right now I've not found any way to use USB Printer connected to TD-W8968 while using W8. WhoCrashes states that the crash cause was Printer Controller Utility. It is very easy to reproduce the crash.
Both firmware and the utility was downloaded from [URL] According to this webpage TD-W8968_V1_USB Printer Controller Utility( For Windows) works in Windows 8.
[URL]
View 3 Replies
View Related
Feb 17, 2013
Region : Romania
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : latest
ISP : RDS
I am experiencing an issue since I bought my new laptop.I connect to the Internet with Windows 8 and TL-WR1043ND.My issue is that ever since I installed the printer utility from the site I hear an ON/OFF sound in my speaker randomly and I can not figure out what`s wrong.I think it`s trying to search for my printer but it it off.Also wi-fi disconnects randomly ever since this application was installed.What can I do to fix this issue.Computer works fine without the application.There is no report about this issue in the Event Viewer.
View 4 Replies
View Related
Dec 11, 2011
I got a spare WAG160N lying around which I want to test to see if I can get a better range with it than my current router.My internet is connected via a cable modem which I connect to the ethernet port 1 on the WAG160N - which in my experience with other wireless routers - will work and broadcasts internet through wifi. However I can't seem to get it to work.After doing a bit of searching I found that some people say this isn't possible on the WAG160N while others say it's possible if I switch the port 1 to "Use as WAN port" in the ethernet setting tab page (Tried it, still doesn't work). I can obviously connect to the router setting page but no internet is flowing through (And the internet LED does not light up)
What settings do I need to use to make this work or is it indeed impossible? It's in bridge mode only at the moment with other settings untouched from factory defaults.One person says it's possible but I can only get it to work with 1 device because it's assigning the public IP on the cable modem onto the one device - but I couldn't get this to work either.
View 3 Replies
View Related
Mar 31, 2013
I've been trying to configure my router which is linksys E1000 to forward port to my sharepoint server. Here is what I have done so far, setup single portforward to i.e 192.168.xx.xx using port 4848.Now my question is, do I need to configure sharepoint to receive this incoming connection. I do need to have my sharepoint be accessed anywhere on the web.
View 1 Replies
View Related
Mar 29, 2011
I'm using a Verizon DSL router, Mac D-Link Camera Setup Utility (BETA), and Mac OS X 10.6.7. Configuration of camera is as recommended in manual with CAT-5 cable. Green light blinks irregularly in a communicating-with-router manner. The setup utility won't recognize the camera
View 1 Replies
View Related
Apr 9, 2012
So, what I essentially want to do is share the device connected to the back of my router so that I can remotely access it over the internet. Much like the manual says you can do.
But I'm having trouble. I've currently got the port set at 38, but the website never loads.
View 1 Replies
View Related
Jan 29, 2011
I got firmware 1.33NA, resetted to default settings. After a reset from the button at the back of the device, I couldn't get network share to work again. I have a win7 and an xp laptop connected to the router wirelessly.
View 5 Replies
View Related
Mar 15, 2011
After setting up my new dir-655 my pc's cannot share any files. I have tried turning off my firewall (kaspersky) although there was no problem with my old router. all pc's are running windows 7 and are on the homegroup.I can see all the pc's but cannot share anything.after reading some of the other post I have made sure that WLAN is unchecked.the router version is b1.
View 3 Replies
View Related
Sep 5, 2011
WRT54GL has an option to restrict or share the bandwidth equally to each ethernet port or wireless? I need this option in a low bandwith area because the first computer connected to the router who makes some traffic (e.g. youtube) takes all the bandwith allocated by the ISP. url...
View 1 Replies
View Related
Jan 3, 2013
My computers and my modem were connected in a D-link hub. Only one computer have an internet. What will I do to make other computers share the internet?
View 4 Replies
View Related
Mar 21, 2011
I would like to share my live video from my dcs-930L camera but don't want to give out my password that would allow people to change settings..
View 3 Replies
View Related
Jul 18, 2011
I want to share files between two computers in my household. One has Windows XP professional and the other has Windows Vista Home Premium. I have a D-Link DIR-300 wireless router, and I set up static IP's for each PC.
View 3 Replies
View Related
Oct 6, 2012
I moved to a new apartment and have to wait a month or even more to get my DSL internet, so I temporarily got myself a USB 3G device to have some access to the internet till I get my DSL line.
The USB acts as 3G modem for a single PC that's connected to it, what I want is to share that internet using my D-Link DIR-655 router so I'd be able to connect my iPhone and PS3 as well.
How to get that setup working as smoothly as possible would be great. DIR-655's default gateway is 192.168.0.1, and the auto DHCP range IIRC is 192.168.0.100 to 192.168.0.199.
View 3 Replies
View Related
Mar 29, 2013
Region : Others
Model : TL-WR702N
Hardware Version : V1
Firmware Version :
ISP :
Going to a hotel where they'll charge me (a lot) for WiFi in the room, for only 1 device. Will the TL-WR702N let me share this 1-device internet connection among several devices?
View 1 Replies
View Related
Mar 2, 2011
If you can't home share on iTunes between Computers or AppleTV, try turning multicast on
1) login to router
2) Go to Advanced tab
3) Select Advanced Networking on Left hand column
4) Select checkbox to enable multicast streams
5) Save the changes
In order to get all my machines working, I also had to enable multicast streams on my network extender as well. The IP address for the network extender is 192.168.0.50 or type in DLINKAP in the URL bar and follow the relevant instructions for your model number.
Please note if you use a software firewall on your PC or Mac, you may need to also free up TCP port 3689 and UDP port 5353. However there are plenty of support articles at Apple / Norton / Microsoft / etc... on how to do this for your relevant firewall..
View 4 Replies
View Related
Dec 11, 2010
I'm looking for a wireless-N router with USB drive share, those are my only requirements. I was looking at a D-Link DIR-655.
View 11 Replies
View Related
Jan 10, 2012
I have one laptop and a wifi dongle and a router. I want to receive internet on my wireless device of my laptop and want to broadcast or share internet from wifi dongle(TP-LINK).
View 2 Replies
View Related
Dec 28, 2012
Region : Netherlands
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP :
I just bought TP-link wireless N gigabit router (model No. TL-WR1043ND). Everything is working fine except my external hard disk drive connected via usb on the router.I am using Ubuntu 12.10 and I don't know where to find the HDD.
I can see the disc in router settings but I don't know how to access it. Clicking on Open the disk does nothing and following the url file://192.168.1.1/Volume1 results in webpage not found.
I can access the External HDD with windows no problem but how do I access it in Ubuntu?
View 5 Replies
View Related
Sep 4, 2011
I'm Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on bothsystems but they cannot see each other in network places. I am unable to sharefiles between the them. I have tried all the procedures mentioned in many forumsbut still not able to find a solution
View 4 Replies
View Related
Dec 5, 2012
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.17 Build 120426 Rel.29216n
ISP : Comcast
I got my router 2 days ago and it's set up working perfectly. I was playing around with the USB funtions and want to set up a media share drive and a storage sharing. I've connected two drives A - this drive is 500GB with movies
Media Server Setting Server Name:TP-LINK_BE4914.Server Status:Started
I've shared the movies folder but when I go to another PC, it doesnt show anything when I open Media player (in the library section, only shows my ipod)for this, it sees the drive and shows a link that says open drive but when i click it, it doesnt open. i'm using chrome.i have to go to the explorer window and manually type in file://192.168.0.1/volume9/
View 7 Replies
View Related
